archlinuxarm/PKGBUILDs
1
0
Fork 0
mirror of https://github.com/archlinuxarm/PKGBUILDs.git synced 2024-11-08 22:45:43 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
PKGBUILDs/alarm/uboot-usbarmory-mkii/0001-ARM-mx6-add-support-for-USB-armory-Mk-II-board.patch

1232 lines
38 KiB
Diff
Raw Permalink Normal View History

alarm/uboot-usbarmory-mkii to 2019.07-2
2019-09-26 00:51:03 +00:00
From dd52cf8ec4cf724377cc0b3c6960db0533a7d33d Mon Sep 17 00:00:00 2001
added alarm/uboot-usbarmory-mkii
2019-08-17 17:59:19 +00:00
From: Andrej Rosano <andrej.rosano@f-secure.com>
Date: Mon, 15 Jul 2019 16:13:57 +0200
Subject: [PATCH 1/2] ARM: mx6: add support for USB armory Mk II board
Add support for Inverse Path USB armory Mk II board, an open source
flash-drive sized computer based on Freescale i.MX6ULL SoC.
http://inversepath.com/usbarmory
Signed-off-by: Andrej Rosano <andrej.rosano@f-secure.com>
---
arch/arm/dts/Makefile | 3 +-
alarm/uboot-usbarmory-mkii to 2019.07-2
2019-09-26 00:51:03 +00:00
arch/arm/dts/imx6ull-usbarmory.dts | 208 ++++++++++++
added alarm/uboot-usbarmory-mkii
2019-08-17 17:59:19 +00:00
arch/arm/mach-imx/mx6/Kconfig | 8 +
board/inversepath/usbarmory-mark-two/Kconfig | 67 ++++
.../usbarmory-mark-two/MAINTAINERS | 6 +
board/inversepath/usbarmory-mark-two/Makefile | 10 +
alarm/uboot-usbarmory-mkii to 2019.07-2
2019-09-26 00:51:03 +00:00
.../usbarmory-mark-two/imximage-1gb.cfg | 90 +++++
.../usbarmory-mark-two/imximage-512mb.cfg | 92 +++++
.../usbarmory-mark-two/usbarmory-mark-two.c | 321 ++++++++++++++++++
added alarm/uboot-usbarmory-mkii
2019-08-17 17:59:19 +00:00
configs/usbarmory-mark-two_defconfig | 64 ++++
alarm/uboot-usbarmory-mkii to 2019.07-2
2019-09-26 00:51:03 +00:00
include/configs/usbarmory-mark-two.h | 242 +++++++++++++
11 files changed, 1110 insertions(+), 1 deletion(-)
added alarm/uboot-usbarmory-mkii
2019-08-17 17:59:19 +00:00
create mode 100644 arch/arm/dts/imx6ull-usbarmory.dts
create mode 100644 board/inversepath/usbarmory-mark-two/Kconfig
create mode 100644 board/inversepath/usbarmory-mark-two/MAINTAINERS
create mode 100644 board/inversepath/usbarmory-mark-two/Makefile
create mode 100644 board/inversepath/usbarmory-mark-two/imximage-1gb.cfg
create mode 100644 board/inversepath/usbarmory-mark-two/imximage-512mb.cfg
create mode 100644 board/inversepath/usbarmory-mark-two/usbarmory-mark-two.c
create mode 100644 configs/usbarmory-mark-two_defconfig
create mode 100644 include/configs/usbarmory-mark-two.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 20dbc2ff84..3efa735a48 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -592,7 +592,8 @@ dtb-$(CONFIG_MX6ULL) += \
imx6ull-14x14-evk.dtb \
imx6ull-colibri.dtb \
imx6ull-phycore-segin.dtb \
- imx6ull-dart-6ul.dtb
+ imx6ull-dart-6ul.dtb \
+ imx6ull-usbarmory.dtb
dtb-$(CONFIG_ARCH_MX6) += \
imx6-apalis.dtb \
diff --git a/arch/arm/dts/imx6ull-usbarmory.dts b/arch/arm/dts/imx6ull-usbarmory.dts
new file mode 100644
alarm/uboot-usbarmory-mkii to 2019.07-2
2019-09-26 00:51:03 +00:00
index 0000000000..37b8d00a2b
added alarm/uboot-usbarmory-mkii
2019-08-17 17:59:19 +00:00
--- /dev/null
+++ b/arch/arm/dts/imx6ull-usbarmory.dts
alarm/uboot-usbarmory-mkii to 2019.07-2
2019-09-26 00:51:03 +00:00
@@ -0,0 +1,208 @@
added alarm/uboot-usbarmory-mkii
2019-08-17 17:59:19 +00:00
+/*
+ * USB armory Mk II device tree file
+ * https://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2019, F-Secure Corporation
+ * Andrej Rosano <andrej.rosano@f-secure.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6ull.dtsi"
+
+/ {
+ model = "F-Secure USB armory Mk II";
+ compatible = "inversepath,imx6ull-usbarmory-mkII", "fsl,imx6ull";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+
+ led-white {
+ label = "LED_WHITE";
+ gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-blue {
+ label = "LED_BLUE";
+ gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_sd1_vmmc: sd1_regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
+ signature {
+ sig@0 {
+ required = "conf";
+ algo = "sha256,rsa2048";
+ key-name-hint = "usbarmory";
+ };
+ };
+};
+
+&cpu0 {
+ operating-points = <
+ /* kHz uV */
+ 900000 1275000
+ 792000 1225000
+ 528000 1175000
+ 396000 1025000
+ 198000 950000
+ >;
+ fsl,soc-operating-points = <
+ /* KHz uV */
+ 900000 1250000
+ 792000 1175000
+ 528000 1175000
+ 396000 1175000
+ 198000 1175000
+ >;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bluetooth>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ no-1-8-v;
+ keep-power-in-suspend;
+ wakeup-source;
+ non-removable; // FIXME: CD works on i.MX6ULL but not i.MX6ULZ
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ non-removable;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_bluetooth: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b0 /* BT_UART_TX */
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b0 /* BT_UART_RX */
+ MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x1b0b0 /* BT_UART_CTS */
+ MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS 0x1b0b0 /* BT_UART_RTS */
+ MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x1f020 /* BT_UART_DSR */
+ MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x1f020 /* BT_UART_DTR */
+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1f020 /* BT_SWDCLK */
+ MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1f020 /* BT_SWDIO */
+ MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x1f020 /* BT_RESET */
+ MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x1f020 /* BT_SWITCH_1 */
+ MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x1f020 /* BT_SWITCH_2 */
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x4001b8b0
+ MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x1f020
+ MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x1f020
+ >;
+ };
+};
+
+&usbotg1 {
+ dr_mode = "peripheral";
+ disable-over-current;
+ tpl-support;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ tpl-support;
+ status = "okay";
+};
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index fe5991e7c6..0e29413c1e 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -512,6 +512,13 @@ config TARGET_UDOO_NEO
config TARGET_SOFTING_VINING_2000
bool "Softing VIN|ING 2000"
+
+config TARGET_USBARMORY_MARK_TWO
+ bool "Support USB armory Mk II"
+ select MX6ULL
+
+config TARGET_SAMTEC_VINING_2000
+ bool "samtec VIN|ING 2000"
select BOARD_LATE_INIT
select DM
select DM_THERMAL
@@ -591,6 +598,7 @@ source "board/phytec/pcm058/Kconfig"
source "board/phytec/pfla02/Kconfig"
source "board/phytec/pcl063/Kconfig"
source "board/gateworks/gw_ventana/Kconfig"
+source "board/inversepath/usbarmory-mark-two/Kconfig"
source "board/kosagi/novena/Kconfig"
source "board/softing/vining_2000/Kconfig"
source "board/liebherr/display5/Kconfig"
diff --git a/board/inversepath/usbarmory-mark-two/Kconfig b/board/inversepath/usbarmory-mark-two/Kconfig
new file mode 100644
index 0000000000..9a1afe8665
--- /dev/null
+++ b/board/inversepath/usbarmory-mark-two/Kconfig
@@ -0,0 +1,67 @@
+if TARGET_USBARMORY_MARK_TWO
+
+choice
+ prompt "DDR size"
+ default SYS_DDR_512MB
+
+config SYS_DDR_512MB
+ bool "512 MB"
+
+config SYS_DDR_1GB
+ bool "1 GB"
+
+endchoice
+
+choice
+ prompt "Boot device"
+ default SYS_BOOT_DEV_MICROSD
+
+config SYS_BOOT_DEV_MICROSD
+ bool "micro SD"
+
+config SYS_BOOT_DEV_EMMC
+ bool "eMMC"
+
+endchoice
+
+choice
+ prompt "Boot mode"
+ default SYS_BOOT_MODE_NORMAL
+
+config SYS_BOOT_MODE_NORMAL
+ select DISTRO_DEFAULTS
+ select ENV_IS_IN_MMC
+ bool "Normal"
+
+config SYS_BOOT_MODE_UMS
+ bool "UMS"
+ select ENV_IS_NOWHERE
+
+config SYS_BOOT_MODE_TFTP
+ bool "TFTP"
+ select ENV_IS_NOWHERE
+
+config SYS_BOOT_MODE_VERIFIED_OPEN
+ bool "Verified Boot"
+ select ENV_IS_NOWHERE
+
+config SYS_BOOT_MODE_VERIFIED_LOCKED
+ bool "Verified Boot and console disabled"
+ select ENV_IS_NOWHERE
+
+endchoice
+
+config IMX_CONFIG
+ default "board/inversepath/usbarmory-mark-two/imximage-512mb.cfg" if SYS_DDR_512MB
+ default "board/inversepath/usbarmory-mark-two/imximage-1gb.cfg" if SYS_DDR_1GB
+
+config SYS_BOARD
+ default "usbarmory-mark-two"
+
+config SYS_VENDOR
+ default "inversepath"
+
+config SYS_CONFIG_NAME
+ default "usbarmory-mark-two"
+
+endif
diff --git a/board/inversepath/usbarmory-mark-two/MAINTAINERS b/board/inversepath/usbarmory-mark-two/MAINTAINERS
new file mode 100644
index 0000000000..89b68ae866
--- /dev/null
+++ b/board/inversepath/usbarmory-mark-two/MAINTAINERS
@@ -0,0 +1,6 @@
+USBARMORY MK II BOARD
+M: Andrej Rosano <andrej.rosano@f-secure.com>
+S: Maintained
+F: board/inversepath/usbarmory-mark-two/
+F: include/configs/usbarmory-mark-two.h
+F: configs/usbarmory-mark-two_defconfig
diff --git a/board/inversepath/usbarmory-mark-two/Makefile b/board/inversepath/usbarmory-mark-two/Makefile
new file mode 100644
index 0000000000..471735e274
--- /dev/null
+++ b/board/inversepath/usbarmory-mark-two/Makefile
@@ -0,0 +1,10 @@
+#
+# USB armory Mk II board Makefile
+# http://inversepath.com/usbarmory
+#
+# Copyright (C) 2019, F-Secure
+# Andrej Rosano <andrej.rosano@f-secure.com>
+#
+# SPDX-License-Identifier:|____GPL-2.0+
+
+obj-y := usbarmory-mark-two.o
diff --git a/board/inversepath/usbarmory-mark-two/imximage-1gb.cfg b/board/inversepath/usbarmory-mark-two/imximage-1gb.cfg
new file mode 100644
index 0000000000..878fc25868
--- /dev/null
+++ b/board/inversepath/usbarmory-mark-two/imximage-1gb.cfg
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * USB armory Mk II board imximage configuration
+ * http://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2019, F-Secure Corportation
+ * Andrej Rosano <andrej.rosano@f-secure.com>
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+IMAGE_VERSION 2
+BOOT_FROM sd
+
+#ifdef CONFIG_SECURE_BOOT
+CSF CONFIG_CSF_SIZE
+#endif
+
+/* CCM */
+
+DATA 4 0x020c4068 0xffffffff /* CCM_CCGR0 */
+DATA 4 0x020c406c 0xffffffff /* CCM_CCGR1 */
+DATA 4 0x020c4070 0xffffffff /* CCM_CCGR2 */
+DATA 4 0x020c4074 0xffffffff /* CCM_CCGR3 */
+DATA 4 0x020c4078 0xffffffff /* CCM_CCGR4 */
+DATA 4 0x020c407c 0xffffffff /* CCM_CCGR5 */
+DATA 4 0x020c4080 0xffffffff /* CCM_CCGR6 */
+
+/* IOMUX */
+
+DATA 4 0x020E04B4 0x000C0000 /* GRP_DDR_TYPE */
+DATA 4 0x020E04AC 0x00000000 /* GRP_DDRPKE */
+DATA 4 0x020E027C 0x00000030 /* DRAM_SDCLK0_P */
+DATA 4 0x020E0250 0x00000030 /* DRAM_CAS_B */
+DATA 4 0x020E024C 0x00000030 /* DRAM_RAS_B */
+DATA 4 0x020E0490 0x00000030 /* GRP_ADDDS */
+DATA 4 0x020E0288 0x00000030 /* DRAM_RESET */
+DATA 4 0x020E0270 0x00000000 /* DRAM_SDBA2 */
+DATA 4 0x020E0260 0x00000030 /* DRAM_ODT0 */
+DATA 4 0x020E0264 0x00000030 /* DRAM_ODT1 */
+DATA 4 0x020E04A0 0x00000030 /* GRP_CTLDS */
+DATA 4 0x020E0494 0x00020000 /* GRP_DDRMODE_CTL */
+DATA 4 0x020E0280 0x00000030 /* DRAM_SDQS0_P */
+DATA 4 0x020E0284 0x00000030 /* DRAM_SDQS1_P */
+DATA 4 0x020E04B0 0x00020000 /* GRP_DDRMODE */
+DATA 4 0x020E0498 0x00000030 /* GRP_B0DS */
+DATA 4 0x020E04A4 0x00000030 /* GRP_B1DS */
+DATA 4 0x020E0244 0x00000030 /* DRAM_DQM0 */
+DATA 4 0x020E0248 0x00000030 /* DRAM_DQM1 */
+
+/* MMDC */
+
+DATA 4 0x021B001C 0x00008000 /* MMDC_MDSCR */
+DATA 4 0x021B000C 0x676B52F3 /* MMDC_MDCFG0 */
+DATA 4 0x021B0010 0xB66D0B63 /* MMDC_MDCFG1 */
+DATA 4 0x021B0014 0x01FF00DB /* MMDC_MDCFG2 */
+DATA 4 0x021B0008 0x1B333030 /* MMDC_MDOTC */
+DATA 4 0x021B0018 0x00201740 /* MMDC_MDMISC */
+DATA 4 0x021B002C 0x000026D2 /* MMDC_MDRWD */
+DATA 4 0x021B0040 0x0000005F /* MMDC_MDASP */
+DATA 4 0x021B0030 0x006B1023 /* MMDC_MDOR */
+DATA 4 0x021B0000 0x85180000 /* MMDC_MDCTL */
+
+/* Calibration */
+DATA 4 0x021B0800 0xA1390003 /* MMDC_MPZQHWCTRL */
+DATA 4 0x021B080C 0x00100014 /* MMDC_MPWLDECTRL0 */
+DATA 4 0x021B083C 0x415C015C /* MMDC_MPDGCTRL0 */
+DATA 4 0x021B0848 0x40403A40 /* MMDC_MPRDDLCTL */
+DATA 4 0x021B0850 0x40402626 /* MMDC_MPWRDLCTL */
+DATA 4 0x021B081C 0x33333333 /* MMDC_MPRDDQBY0DL */
+DATA 4 0x021B0820 0x33333333 /* MMDC_MPRDDQBY1DL */
+DATA 4 0x021B082C 0xf3333333 /* MMDC_MPWRDQBY0DL */
+DATA 4 0x021B0830 0xf3333333 /* MMDC_MPWRDQBY1DL */
+DATA 4 0x021B08C0 0x00921012 /* MMDC_MPDCCR */
+DATA 4 0x021B08B8 0x00000800 /* MMDC_MPMUR0 */
+
+/* JEDEC initialization sequence */
+DATA 4 0x021B001C 0x02008032 /* MMDC_MDSCR */
+DATA 4 0x021B001C 0x00008033 /* MMDC_MDSCR */
+DATA 4 0x021B001C 0x00048031 /* MMDC_MDSCR */
+DATA 4 0x021B001C 0x15208030 /* MMDC_MDSCR */
+DATA 4 0x021B001C 0x04008040 /* MMDC_MDSCR */
+
+DATA 4 0x021B0004 0x0002556D /* MMDC_MDPDC */
+DATA 4 0x021B0404 0x00011006 /* MMDC_MAPSR */
+DATA 4 0x021B0020 0x00000800 /* MMDC_MDREF */
+DATA 4 0x021B0818 0x00000227 /* MMDC_MPODTCTRL */
+
+DATA 4 0x021B001C 0x00000000 /* MMDC_MDSCR */
diff --git a/board/inversepath/usbarmory-mark-two/imximage-512mb.cfg b/board/inversepath/usbarmory-mark-two/imximage-512mb.cfg
new file mode 100644
index 0000000000..953309f8f9
--- /dev/null
+++ b/board/inversepath/usbarmory-mark-two/imximage-512mb.cfg
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * USB armory Mk II board imximage configuration
+ * http://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2019, F-Secure Corportation
+ * Andrej Rosano <andrej.rosano@f-secure.com>
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+IMAGE_VERSION 2
+BOOT_FROM sd
+
+#ifdef CONFIG_SECURE_BOOT
+CSF CONFIG_CSF_SIZE
+#endif
+
+/* CCM */
+
+DATA 4 0x020c4068 0xffffffff /* CCM_CCGR0 */
+DATA 4 0x020c406c 0xffffffff /* CCM_CCGR1 */
+DATA 4 0x020c4070 0xffffffff /* CCM_CCGR2 */
+DATA 4 0x020c4074 0xffffffff /* CCM_CCGR3 */
+DATA 4 0x020c4078 0xffffffff /* CCM_CCGR4 */
+DATA 4 0x020c407c 0xffffffff /* CCM_CCGR5 */
+DATA 4 0x020c4080 0xffffffff /* CCM_CCGR6 */
+
+/* IOMUX */
+
+DATA 4 0x020E04B4 0x000C0000 /* GRP_DDR_TYPE */
+DATA 4 0x020E04AC 0x00000000 /* GRP_DDRPKE */
+DATA 4 0x020E027C 0x00000030 /* DRAM_SDCLK0_P */
+DATA 4 0x020E0250 0x00000030 /* DRAM_CAS_B */
+DATA 4 0x020E024C 0x00000030 /* DRAM_RAS_B */
+DATA 4 0x020E0490 0x00000030 /* GRP_ADDDS */
+DATA 4 0x020E0288 0x00000030 /* DRAM_RESET */
+DATA 4 0x020E0270 0x00000000 /* DRAM_SDBA2 */
+DATA 4 0x020E0260 0x00000030 /* DRAM_ODT0 */
+DATA 4 0x020E0264 0x00000030 /* DRAM_ODT1 */
+DATA 4 0x020E04A0 0x00000030 /* GRP_CTLDS */
+DATA 4 0x020E0494 0x00020000 /* GRP_DDRMODE_CTL */
+DATA 4 0x020E0280 0x00000030 /* DRAM_SDQS0_P */
+DATA 4 0x020E0284 0x00000030 /* DRAM_SDQS1_P */
+DATA 4 0x020E04B0 0x00020000 /* GRP_DDRMODE */
+DATA 4 0x020E0498 0x00000030 /* GRP_B0DS */
+DATA 4 0x020E04A4 0x00000030 /* GRP_B1DS */
+DATA 4 0x020E0244 0x00000030 /* DRAM_DQM0 */
+DATA 4 0x020E0248 0x00000030 /* DRAM_DQM1 */
+
+/* MMDC */
+
+DATA 4 0x021B001C 0x00008000 /* MMDC_MDSCR */
+DATA 4 0x021B000C 0x676B52F3 /* MMDC_MDCFG0 */
+DATA 4 0x021B0010 0xB66D0B63 /* MMDC_MDCFG1 */
+DATA 4 0x021B0014 0x01FF00DB /* MMDC_MDCFG2 */
+DATA 4 0x021B0008 0x1B333030 /* MMDC_MDOTC */
+DATA 4 0x021B0018 0x00201740 /* MMDC_MDMISC */
+DATA 4 0x021B002C 0x000026D2 /* MMDC_MDRWD */
+DATA 4 0x021B0040 0x0000004F /* MMDC_MDASP */
+DATA 4 0x021B0030 0x006B1023 /* MMDC_MDOR */
+DATA 4 0x021B0000 0x84180000 /* MMDC_MDCTL */
+
+/* Calibration */
+DATA 4 0x021B0800 0xA1390003 /* MMDC_MPZQHWCTRL */
+DATA 4 0x021B080C 0x000D000F /* MMDC_MPWLDECTRL0 */
+DATA 4 0x021B0810 0x00100010 /* MMDC_MPWLDECTRL1 */
+DATA 4 0x021B083C 0x415C0160 /* MMDC_MPDGCTRL0 */
+DATA 4 0x021B0840 0x00000000 /* MMDC_MPDGCTRL1 */
+DATA 4 0x021B0848 0x40403C42 /* MMDC_MPRDDLCTL */
+DATA 4 0x021B0850 0x40402C26 /* MMDC_MPWRDLCTL */
+DATA 4 0x021B081C 0x33333333 /* MMDC_MPRDDQBY0DL */
+DATA 4 0x021B0820 0x33333333 /* MMDC_MPRDDQBY1DL */
+DATA 4 0x021B082C 0xf3333333 /* MMDC_MPWRDQBY0DL */
+DATA 4 0x021B0830 0xf3333333 /* MMDC_MPWRDQBY1DL */
+DATA 4 0x021B08C0 0x00921012 /* MMDC_MPDCCR */
+DATA 4 0x021B08B8 0x00000800 /* MMDC_MPMUR0 */
+
+/* JEDEC initialization sequence */
+DATA 4 0x021B001C 0x02008032 /* MMDC_MDSCR */
+DATA 4 0x021B001C 0x00008033 /* MMDC_MDSCR */
+DATA 4 0x021B001C 0x00048031 /* MMDC_MDSCR */
+DATA 4 0x021B001C 0x15208030 /* MMDC_MDSCR */
+DATA 4 0x021B001C 0x04008040 /* MMDC_MDSCR */
+
+DATA 4 0x021B0004 0x0002556D /* MMDC_MDPDC */
+DATA 4 0x021B0404 0x00011006 /* MMDC_MAPSR */
+DATA 4 0x021B0020 0x00000800 /* MMDC_MDREF */
+DATA 4 0x021B0818 0x00000227 /* MMDC_MPODTCTRL */
+
+DATA 4 0x021B001C 0x00000000 /* MMDC_MDSCR */
diff --git a/board/inversepath/usbarmory-mark-two/usbarmory-mark-two.c b/board/inversepath/usbarmory-mark-two/usbarmory-mark-two.c
new file mode 100644
alarm/uboot-usbarmory-mkii to 2019.07-2
2019-09-26 00:51:03 +00:00
index 0000000000..bd540dd613
added alarm/uboot-usbarmory-mkii
2019-08-17 17:59:19 +00:00
--- /dev/null
+++ b/board/inversepath/usbarmory-mark-two/usbarmory-mark-two.c
alarm/uboot-usbarmory-mkii to 2019.07-2
2019-09-26 00:51:03 +00:00
@@ -0,0 +1,321 @@
added alarm/uboot-usbarmory-mkii
2019-08-17 17:59:19 +00:00
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * USB armory Mk II board initialization
+ * http://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2019, F-Secure Corporation
+ * Andrej Rosano <andrej.rosano@f-secure.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <linux/errno.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <asm/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+#define WEAK_PULLUP (PAD_CTL_PUS_100K_UP || \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS || \
+ PAD_CTL_SRE_SLOW)
alarm/uboot-usbarmory-mkii to 2019.07-2
2019-09-26 00:51:03 +00:00
+#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
added alarm/uboot-usbarmory-mkii
2019-08-17 17:59:19 +00:00
+
+static void setup_iomux_uart(void)
+{
+ static const iomux_v3_cfg_t pads[] = {
+#ifndef CONFIG_SYS_BOOT_MODE_VERIFIED_LOCKED
+ MX6_PAD_UART2_TX_DATA__UART2_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_UART2_RX_DATA__UART2_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_UART2_CTS_B__UART2_DCE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_UART2_RTS_B__UART2_DCE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL)
+#else
+ MX6_PAD_UART2_TX_DATA__GPIO1_IO20 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_UART2_RX_DATA__GPIO1_IO21 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_UART2_CTS_B__GPIO1_IO22 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_UART2_RTS_B__GPIO1_IO23 | MUX_PAD_CTRL(WEAK_PULLUP)
+#endif
+ };
+
+ imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads));
+}
+
+static void setup_iomux_i2c(void)
+{
+ static const iomux_v3_cfg_t pads[] = {
+ MX6_PAD_GPIO1_IO02__I2C1_SCL | MUX_PAD_CTRL(I2C_PAD_CTRL),
+ MX6_PAD_GPIO1_IO03__I2C1_SDA | MUX_PAD_CTRL(I2C_PAD_CTRL)
+ };
+
+ imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads));
+}
+
alarm/uboot-usbarmory-mkii to 2019.07-2
2019-09-26 00:51:03 +00:00
+static void setup_iomux_mmc(void)
+{
+ static const iomux_v3_cfg_t pads[] = {
+ /* microSD */
+ MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_UART1_RTS_B__USDHC1_CD_B | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ /* eMMC */
+ MX6_PAD_NAND_RE_B__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_WE_B__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA00__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA01__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA02__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA04__USDHC2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA05__USDHC2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA06__USDHC2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA07__USDHC2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)
+ };
+
+ imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads));
+}
+
added alarm/uboot-usbarmory-mkii
2019-08-17 17:59:19 +00:00
+static void setup_iomux_misc(void)
+{
+ static const iomux_v3_cfg_t pads[] = {
+ /* type-c */
+ MX6_PAD_GPIO1_IO00__GPIO1_IO00 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_GPIO1_IO01__GPIO1_IO01 | MUX_PAD_CTRL(WEAK_PULLUP),
+ /* crypto */
+ MX6_PAD_ENET2_TX_DATA1__GPIO2_IO12 | MUX_PAD_CTRL(WEAK_PULLUP),
+ /* pmic */
+ MX6_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB | MUX_PAD_CTRL(WEAK_PULLUP),
+ /* usb */
+ MX6_PAD_GPIO1_IO05__ANATOP_OTG2_ID | MUX_PAD_CTRL(WEAK_PULLUP)
+ };
+
+ imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads));
+}
+
+static void setup_iomux_unused_boot(void)
+{
+ static const iomux_v3_cfg_t pads[] = {
+
+ /* pulled-up/pulled-down pads */
+ MX6_PAD_LCD_DATA05__GPIO3_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_LCD_DATA11__GPIO3_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_LCD_DATA14__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_LCD_DATA08__GPIO3_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL),
+
+ /* floating and pulled-up pads */
+ MX6_PAD_LCD_DATA00__GPIO3_IO05 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA01__GPIO3_IO06 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA02__GPIO3_IO07 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA03__GPIO3_IO08 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA04__GPIO3_IO09 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA06__GPIO3_IO11 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA07__GPIO3_IO12 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA09__GPIO3_IO14 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA10__GPIO3_IO15 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA12__GPIO3_IO17 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA13__GPIO3_IO18 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA15__GPIO3_IO20 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA16__GPIO3_IO21 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA17__GPIO3_IO22 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA18__GPIO3_IO23 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA19__GPIO3_IO24 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA20__GPIO3_IO25 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA21__GPIO3_IO26 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA22__GPIO3_IO27 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_DATA23__GPIO3_IO28 | MUX_PAD_CTRL(WEAK_PULLUP)
+ };
+
+ imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads));
+}
+
+static void setup_iomux_unused_nc(void)
+{
+ /* Out of reset values define the pin values before the
+ ROM is executed so we force all the not connected pins
+ to a known state */
+ static const iomux_v3_cfg_t pads[] = {
+
+ /* TAMPER pins */
+ MX6_PAD_SNVS_TAMPER0__GPIO5_IO00 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_SNVS_TAMPER1__GPIO5_IO01 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_SNVS_TAMPER2__GPIO5_IO02 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_SNVS_TAMPER3__GPIO5_IO03 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_SNVS_TAMPER4__GPIO5_IO04 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_SNVS_TAMPER5__GPIO5_IO05 | MUX_PAD_CTRL(WEAK_PULLUP),
+ // FIXME: Configuration of one of the following two pads
+ // disables console UART for some reason.
+ //MX6_PAD_SNVS_TAMPER6__GPIO5_IO06 | MUX_PAD_CTRL(WEAK_PULLUP),
+ //MX6_PAD_SNVS_TAMPER7__GPIO5_IO07 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_SNVS_TAMPER8__GPIO5_IO08 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_SNVS_TAMPER9__GPIO5_IO09 | MUX_PAD_CTRL(WEAK_PULLUP),
+
+ /* ENET block */
+ MX6_PAD_ENET1_RX_DATA0__GPIO2_IO00 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_ENET1_RX_DATA1__GPIO2_IO01 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_ENET1_RX_EN__GPIO2_IO02 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_ENET1_TX_DATA0__GPIO2_IO03 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_ENET1_TX_DATA1__GPIO2_IO04 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_ENET1_TX_CLK__GPIO2_IO06 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_ENET1_RX_ER__GPIO2_IO07 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_ENET2_RX_DATA0__GPIO2_IO08 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_ENET2_RX_DATA1__GPIO2_IO09 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_ENET2_RX_EN__GPIO2_IO10 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_ENET2_TX_DATA0__GPIO2_IO11 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_ENET2_TX_CLK__GPIO2_IO14 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_ENET2_RX_ER__GPIO2_IO15 | MUX_PAD_CTRL(WEAK_PULLUP),
+
+ /* CSI block */
+ MX6_PAD_CSI_MCLK__GPIO4_IO17 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_CSI_PIXCLK__GPIO4_IO18 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_CSI_VSYNC__GPIO4_IO19 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_CSI_HSYNC__GPIO4_IO20 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_CSI_DATA02__GPIO4_IO23 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_CSI_DATA03__GPIO4_IO24 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_CSI_DATA04__GPIO4_IO25 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_CSI_DATA05__GPIO4_IO26 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_CSI_DATA06__GPIO4_IO27 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_CSI_DATA07__GPIO4_IO28 | MUX_PAD_CTRL(WEAK_PULLUP),
+
+ /* GPIO block */
+ MX6_PAD_GPIO1_IO08__GPIO1_IO08 | MUX_PAD_CTRL(WEAK_PULLUP),
+
+ /* NAND block */
+ MX6_PAD_NAND_WP_B__GPIO4_IO11 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NAND_READY_B__GPIO4_IO12 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NAND_CE0_B__GPIO4_IO13 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NAND_CE1_B__GPIO4_IO14 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NAND_DQS__GPIO4_IO16 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_NAND_CLE__GPIO4_IO15 | MUX_PAD_CTRL(WEAK_PULLUP),
+
+ /* LCD block */
+ MX6_PAD_LCD_CLK__GPIO3_IO00 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_ENABLE__GPIO3_IO01 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_HSYNC__GPIO3_IO02 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_VSYNC__GPIO3_IO03 | MUX_PAD_CTRL(WEAK_PULLUP),
+ MX6_PAD_LCD_RESET__GPIO3_IO04 | MUX_PAD_CTRL(WEAK_PULLUP)
+ };
+
+ imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads));
+}
+
+static struct fsl_esdhc_cfg usdhc_cfg[2] = {
+ {USDHC1_BASE_ADDR},
+ {USDHC2_BASE_ADDR},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ return 1;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ int ret = 0;
+
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[1]);
+
+ return ret;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ return usb_eth_initialize(bis);
+}
+
+int dram_init(void)
+{
+ gd->ram_size = imx_ddr_size();
+ return 0;
+}
+
+/* Enable FSUSB303 recaptecle Type-C controller */
+int fusb303_init(void)
+{
+ uchar val;
+
+ val = 0xbb;
+ i2c_set_bus_num(0);
+ i2c_write(0x31, 0x5, 1, &val, 1);
+ return 0;
+}
+
+int board_early_init_f(void)
+{
+ // i2c initialization should not be moved in dts as otherwise
+ // the fsusb303_init() does not have effect.
+ setup_iomux_i2c();
+ setup_iomux_uart();
alarm/uboot-usbarmory-mkii to 2019.07-2
2019-09-26 00:51:03 +00:00
+ setup_iomux_mmc();
added alarm/uboot-usbarmory-mkii
2019-08-17 17:59:19 +00:00
+ setup_iomux_unused_boot();
+ setup_iomux_unused_nc();
+ setup_iomux_misc();
+ return 0;
+}
+
+int board_init(void)
+{
+ fusb303_init();
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: F-Secure USB armory Mk II\n");
+ return 0;
+}
+
+#ifndef CONFIG_CMDLINE
+static char *ext2_argv[] = {
+ "ext2load",
+ "mmc",
+ USBARMORY_BOOT_DEV ":1",
+ USBARMORY_FIT_ADDR,
+ USBARMORY_FIT_PATH,
+ USBARMORY_FIT_SIZE
+};
+
+static char *bootm_argv[] = {
+ "bootm",
+ USBARMORY_FIT_ADDR
+};
+
+int board_run_command(const char *cmdline)
+{
+ printf("%s %s %s %s %s %s\n", ext2_argv[0], ext2_argv[1], ext2_argv[2],
+ ext2_argv[3], ext2_argv[4], ext2_argv[5]);
+
+ if (do_ext2load(NULL, 0, 5, ext2_argv) != 0) {
+ udelay(5*1000*1000);
+ return 1;
+ }
+
+ printf("%s %s\n", bootm_argv[0], bootm_argv[1]);
+ do_bootm(NULL, 0, 2, bootm_argv);
+
+ return 1;
+}
+#endif
diff --git a/configs/usbarmory-mark-two_defconfig b/configs/usbarmory-mark-two_defconfig
new file mode 100644
index 0000000000..40981a66da
--- /dev/null
+++ b/configs/usbarmory-mark-two_defconfig
@@ -0,0 +1,64 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_TARGET_USBARMORY_MARK_TWO=y
+
+CONFIG_SYS_DDR_512MB=y
+# CONFIG_SYS_DDR_1GB is not set
+
+# Boot device
+CONFIG_SYS_BOOT_DEV_MICROSD=y
+# CONFIG_SYS_BOOT_DEV_EMMC is not set
+
+# Boot mode
+CONFIG_SYS_BOOT_MODE_NORMAL=y
+# CONFIG_SYS_BOOT_MODE_UMS is not set
+# CONFIG_SYS_BOOT_MODE_TFTP is not set
+# CONFIG_SYS_BOOT_MODE_VERIFIED_OPEN is not set
+# CONFIG_SYS_BOOT_MODE_VERIFIED_LOCKED is not set
+
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_DOS_PARTITION=y
+
+# Commands
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_USB=y
+
+# Device model support
+CONFIG_DM=y
+CONFIG_DM_MMC=y
+CONFIG_DM_USB=y
+CONFIG_BLK=y
+CONFIG_OF_LIBFDT=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_SEPARATE=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6ull-usbarmory"
+
+# Secure/Verified boot
+CONFIG_SECURE_BOOT=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_RSA=y
+
+# USB gadgets
+CONFIG_USB=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="FSL"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+
+# UMS gadget
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+
+# Ethernet gadget
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
diff --git a/include/configs/usbarmory-mark-two.h b/include/configs/usbarmory-mark-two.h
new file mode 100644
index 0000000000..647823ec86
--- /dev/null
+++ b/include/configs/usbarmory-mark-two.h
@@ -0,0 +1,242 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * USB armory Mk II board configuration settings
+ * http://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2019, F-Secure Corporation
+ * Andrej Rosano <andrej.rosano@f-secure.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+#include "mx6_common.h"
+
+/* Environment */
+#define CONFIG_ENV_OFFSET (1 * SZ_1M)
+#define CONFIG_ENV_SIZE (8 * SZ_1K)
+
+/* */
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_CAAM
+
+/* UART */
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART2_BASE
+
+/* USB */
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_USBD_HS
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_MXC_I2C1
+
+/* U-Boot memory offsets */
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+/* Boot parameters */
+#define USBARMORY_FIT_PATH "/boot/usbarmory.itb"
+#define USBARMORY_FIT_ADDR "0x80800000"
+#define USBARMORY_FIT_SIZE "0x4000000"
+
+#ifdef CONFIG_SYS_BOOT_DEV_MICROSD
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define USBARMORY_BOOT_DEV "0"
+#elif CONFIG_SYS_BOOT_DEV_EMMC
+#define CONFIG_SYS_MMC_ENV_DEV 1
+#define USBARMORY_BOOT_DEV "1"
+#endif
+
+/* Bootargs */
+
+#define CONFIG_USE_BOOTARGS
+#define CONFIG_BOOTARGS "console=ttymxc1,115200 root=/dev/mmcblk" USBARMORY_BOOT_DEV "p1 rootwait rw"
+
+#define CONFIG_HOSTNAME "usbarmory"
+#define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_CBSIZE 512
+
+/* DDR size config */
+
+#ifdef CONFIG_SYS_DDR_1GB
+#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + SZ_1G
+#define BOOTENV_DDR_1GB \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0"
+#else
+#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + SZ_512M
+#define BOOTENV_DDR_1GB
+#endif
+
+/* scripts */
+
+#define BOOTENV_CHECK_SILICON_REVISION \
+ "check_silicon_revision=" \
+ "echo *** Checking Silicon Revision *** ; " \
+ "setexpr USB_ANALOG_DIGPROG *0x20c8260 ; " \
+ "setexpr imx6_family $USB_ANALOG_DIGPROG '/' 0x10000 ; " \
+ "setexpr silicon_revision $USB_ANALOG_DIGPROG '&' 0xffff ; " \
+ "if itest $imx6_family == 0x64; then " \
+ "if itest $silicon_revision < 0x0002; then " \
+ "echo ; " \
+ "echo \"***********************************************\" ; " \
+ "echo \"* WARNING *\" ; " \
+ "echo \"* i.MX6UltraLight with Silicon Revision < 1.2 *\" ; " \
+ "echo \"* Important security fixes are missing *\" ; " \
+ "echo \"***********************************************\" ; " \
+ "echo ; " \
+ "fi ; " \
+ "fi ; " \
+ "if itest $imx6_family == 0x65; then " \
+ "if itest $silicon_revision < 0x0001; then " \
+ "echo ; " \
+ "echo \"********************************************\" ; " \
+ "echo \"* WARNING *\" ; " \
+ "echo \"* i.MX6ULL/ULZ with Silicon Revision < 1.1 *\" ; " \
+ "echo \"* Important security fixes are missing *\" ; " \
+ "echo \"********************************************\" ; " \
+ "echo ; " \
+ "fi ; " \
+ "fi\0"
+
+#define BOOTENV_CHECK_OTPMK \
+ "check_otpmk=" \
+ "echo *** Checking OTPMK *** ; " \
+ "env set check_otpmk_var 0 ; " \
+ "setexpr SNVS_HPSR *0x020cc014 ; " \
+ "setexpr test $SNVS_HPSR '&' 0x08000000 ; " \
+ "if itest $test != 0; then " \
+ "env set check_otpmk_var 1 ; " \
+ "echo ; " \
+ "echo \"**************************\" ; " \
+ "echo \"* WARNING: OTPMK is zero *\" ; " \
+ "echo \"**************************\" ; " \
+ "echo ; " \
+ "fi ; " \
+ "setexpr test $SNVS_HPSR '&' 0x01FF0000 ; " \
+ "if itest $test != 0; then " \
+ "env set check_otpmk_var 1 ; " \
+ "echo ; " \
+ "echo \"******************************************\" ; " \
+ "echo \"* WARNING: OTPMK_SYNDROME error detected *\" ; " \
+ "echo \"******************************************\" ; " \
+ "echo ; " \
+ "fi ; " \
+ "setexpr test $SNVS_HPSR '&' 0xF00 ; " \
+ "if itest $test != 0xD00; then " \
+ "env set check_otpmk_var 1 ; " \
+ "echo ; " \
+ "echo \"***************************************\" ; " \
+ "echo \"* WARNING: Device not in TRUSTED mode *\" ; " \
+ "echo \"***************************************\" ; " \
+ "echo ; " \
+ "fi ; " \
+ "if itest $check_otpmk_var != 0; then " \
+ "echo *** Unable to continue. Resetting in 60s *** ; " \
+ "sleep 60 ; " \
+ "reset ; " \
+ "fi\0"
+
+#define BOOTENV_UMS \
+ "start_ums=" \
+ "ums 0 mmc ${mmcdev}\0"
+
+#define BOOTENV_TFTP \
+ "start_tftp=" \
+ "dhcp ${kernel_addr_r} ${serverip}:${bootfile} ; " \
+ "dhcp ${fdt_addr_r} ${serverip}:${fdtfile} ; " \
+ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"
+
+#define BOOTENV_VERIFIED_OPEN \
+ "start_verified_open=" \
+ "ext2load mmc ${mmcdev}:1 " USBARMORY_FIT_ADDR " " USBARMORY_FIT_PATH " " USBARMORY_FIT_SIZE " ; " \
+ "bootm " USBARMORY_FIT_ADDR "\0"
+
+#define BOOTENV_NORMAL \
+ "start_normal=run distro_bootcmd ; " \
+ "ext2load mmc ${mmcdev}:1 ${kernel_addr_r} /boot/${bootfile} ; "\
+ "ext2load mmc ${mmcdev}:1 ${fdt_addr_r} /boot/${fdtfile} ; " \
+ "bootz ${kernel_addr_r} - ${fdt_addr_r}\0"
+
+/* Boot modes */
+
+#ifdef CONFIG_SYS_BOOT_MODE_UMS
+
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "run start_ums"
+
+#elif CONFIG_SYS_BOOT_MODE_VERIFIED_OPEN
+
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "run start_verified_open"
+
+#elif CONFIG_SYS_BOOT_MODE_TFTP
+
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "run start_tftp"
+
+#elif CONFIG_SYS_BOOT_MODE_NORMAL
+
+#include <config_distro_bootcmd.h>
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "run start_normal"
+
+#elif CONFIG_SYS_BOOT_MODE_VERIFIED_LOCKED
+
+#undef CONFIG_CMDLINE
+#undef CONFIG_BOOTDELAY
+#define CONFIG_BOOTDELAY -2
+
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "dummy"
+
+#endif
+
+/* Custom environment variables */
+
+#ifndef BOOTENV
+#define BOOTENV
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "kernel_addr_r=0x80800000\0" \
+ "fdt_addr_r=0x82000000\0" \
+ "scriptaddr=0x80800000\0" \
+ "ramdisk_addr_r=0x83000000\0" \
+ "bootfile=zImage\0" \
+ "fdtfile=imx6ull-usbarmory.dtb\0" \
+ "mmcdev=" USBARMORY_BOOT_DEV "\0" \
+ "ethact=usb_ether\0" \
+ "cdc_connect_timeout=60\0" \
+ "usbnet_devaddr=1a:55:89:a2:69:52\0" \
+ "usbnet_hostaddr=1a:55:89:a2:69:51\0" \
+ BOOTENV_CHECK_SILICON_REVISION \
+ BOOTENV_CHECK_OTPMK \
+ BOOTENV_NORMAL \
+ BOOTENV_TFTP \
+ BOOTENV_UMS \
+ BOOTENV_VERIFIED_OPEN \
+ BOOTENV_DDR_1GB \
+ BOOTENV
+
+/* Physical Memory Map */
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
+
+#endif /* __CONFIG_H */
--
alarm/uboot-usbarmory-mkii to 2019.07-2
2019-09-26 00:51:03 +00:00
2.23.0
added alarm/uboot-usbarmory-mkii
2019-08-17 17:59:19 +00:00
Reference in a new issue Copy permalink