mirror of
https://github.com/archlinuxarm/PKGBUILDs.git
synced 2024-12-08 23:03:46 +00:00
27 lines
2.6 KiB
Text
27 lines
2.6 KiB
Text
|
bootcmd=run startboot;run bootubi
|
||
|
|
bootdir=/boot
|
||
|
|
bootfilem=uImage
|
||
|
|
bootfilez=zImage
|
||
|
|
bootubi=echo Trying to boot from NAND ...;if run mountubi; then ubifsload ${loadaddr} /boot/zImage;ubifsload ${fdtaddr} /boot/dtbs/${fdtfile};ubifsumount; setenv bootargs console=${console} ubi.mtd=1 root=ubi0:rootfs ro rootfstype=ubifs rootwait ${mtdparts};bootz ${loadaddr} - ${fdtaddr};fi
|
||
|
|
console=ttyS0,115200
|
||
|
|
ethact=egiga0
|
||
|
|
fdtaddr=0x800000
|
||
|
|
fdtdir=/boot/dtbs
|
||
|
|
fdtfile=kirkwood-goflexnet.dtb
|
||
|
|
ipaddr=10.10.10.3
|
||
|
|
loadaddr=0x810000
|
||
|
|
loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}
|
||
|
|
loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfilez} || load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfilem}
|
||
|
|
loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}
|
||
|
|
mainargs=setenv bootargs console=${console} ${mtdparts} root=${root} rw rootwait ${optargs} ${ncargs}
|
||
|
|
mountubi=ubi part rootfs; ubifsmount ubi0:rootfs
|
||
|
|
mtdids=nand0=orion_nand
|
||
|
|
mtdparts=mtdparts=orion_nand:1M(u-boot),-(rootfs)
|
||
|
|
ncip=10.10.10.5
|
||
|
|
ncipk=10.10.10.4
|
||
|
|
netconsole=on
|
||
|
|
preboot=if env exists netconsole && test ${netconsole} = on; then if ping ${ncip}; then setenv stdin nc; setenv stdout nc; setenv stderr nc; version; if env exists ncargsusr; then echo ncargs has been defined by user; setenv ncargs ${ncargsusr}; else setenv ncargs ignore_loglevel netconsole=6665@${ipaddr}/eth0,6666@${ncipk}/; fi; fi; else echo Netconsole has been turned off.; echo To turn it on, set netconsole variable to on.; setenv stdin; setenv stdout; setenv stderr; setenv ncargs; fi
|
||
|
|
rdaddr=0x1100000
|
||
|
|
rdfile=initramfs-linux.img
|
||
|
|
startboot=usb start; ide reset; for devtype in usb ide; do setenv devnum 0; while ${devtype} dev ${devnum}; do echo ${devtype} found on device ${devnum}; setenv bootpart ${devnum}:1; echo Checking for: ${bootdir}/uEnv.txt ...; if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt; env import -t ${loadaddr} ${filesize}; echo Loaded environment from ${bootdir}/uEnv.txt; echo Checking if uenvcmd is set ...; if test -n ${uenvcmd}; then echo Running uenvcmd ...; run uenvcmd; fi; fi; if run loadimage; then if env exists root; then echo root has been defined by user; else part uuid ${devtype} ${bootpart} uuid; setenv root PARTUUID=${uuid}; fi; run mainargs; if run loadfdt; then if run loadrd; then bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr}; else bootz ${loadaddr} - ${fdtaddr}; fi; else if run loadrd; then echo Booting uImage with initrd; bootm ${loadaddr} ${rdaddr}:${filesize}; else bootm ${loadaddr}; fi; fi; else echo No kernel found; fi; setexpr devnum ${devnum} + 1; done; done;
|