PKGBUILDs/alarm/uboot-odroid-xu3/uboot-odroid-xu3.install

sd_fuse() {
  device=$1

  if [ ! -b /dev/${device} ]; then
    echo "No MMC device to flash, exiting."
    exit 0
  fi

  if [ -d /sys/block/${device}boot0 ]; then
    echo "/dev/${device} is an eMMC card, disabling read-only.."
    if ! echo 0 > /sys/block/${device}boot0/force_ro; then
      echo "Disabling read-only for /dev/${device}boot0 failed."
      exit 1
    fi
    signed_bl1_position=0
    bl2_position=30
    uboot_position=62
    tzsw_position=2110
    device=/dev/${device}boot0
  else
    signed_bl1_position=1
    bl2_position=31
    uboot_position=63
    tzsw_position=2111
    device=/dev/${device}
  fi

  echo "BL1 fusing"
  dd iflag=dsync oflag=dsync if=/boot/bl1.bin of=$device seek=$signed_bl1_position
  echo "BL2 fusing"
  dd iflag=dsync oflag=dsync if=/boot/bl2.bin of=$device seek=$bl2_position
  echo "u-boot fusing"
  dd iflag=dsync oflag=dsync if=/boot/u-boot.bin of=$device seek=$uboot_position
  echo "TrustZone S/W fusing"
  dd iflag=dsync oflag=dsync if=/boot/tzsw.bin of=$device seek=$tzsw_position
}

flash_uboot() {
  if mountpoint -d /boot > /dev/null 2>&1; then
    base=/boot
  else
    base=/
  fi
  major=$(mountpoint -d $base | cut -f 1 -d ':')
  minor=$(expr $(mountpoint -d $base | cut -f 2 -d ':') - 1)
  device=$(cat /proc/partitions | awk {'if ($1 == "'${major}'" && $2 == "'${minor}'") print $4 '})

  echo "A new U-Boot version needs to be flashed onto /dev/${device}."
  echo "Do you want to do this now? [y|N]"
  read -r shouldwe
  if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
    sd_fuse $device
  else
    echo "You can do this later by running:"
    echo "# cd /boot; ./sd_fusing.sh /dev/${device}"
  fi
}

post_install() {
  flash_uboot
}

post_upgrade() {
  if (( $(vercmp $2 2016.07-1) < 0 )); then
    echo ' >>> Note: boot.ini is no longer used. Make any customizations within /boot/boot.txt'
    echo '           and run ./mkscr within /boot to convert it to the boot.scr file.'
  fi
  flash_uboot
}