PKGBUILDs/core/linux-kirkwood/archlinuxarm.patch

diff -ruN a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi	2013-08-29 10:47:51.000000000 -0600
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi	1969-12-31 17:00:00.000000000 -0700
@@ -1,78 +0,0 @@
-/include/ "kirkwood.dtsi"
-
-/ {
-	model = "QNAP TS219 family";
-	compatible = "qnap,ts219", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-	};
-
-	ocp@f1000000 {
-		i2c@11000 {
-			status = "okay";
-			clock-frequency = <400000>;
-
-			s35390a: s35390a@30 {
-				compatible = "s35390a";
-				reg = <0x30>;
-			};
-		};
-		serial@12000 {
-			clock-frequency = <200000000>;
-			status = "okay";
-		};
-		serial@12100 {
-			clock-frequency = <200000000>;
-			status = "okay";
-		};
-		spi@10600 {
-			status = "okay";
-
-			m25p128@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "m25p128";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-
-				partition@0000000 {
-					reg = <0x00000000 0x00080000>;
-					label = "U-Boot";
-				};
-
-				partition@00200000 {
-					reg = <0x00200000 0x00200000>;
-					label = "Kernel";
-				};
-
-				partition@00400000 {
-					reg = <0x00400000 0x00900000>;
-					label = "RootFS1";
-				};
-				partition@00d00000 {
-					reg = <0x00d00000 0x00300000>;
-					label = "RootFS2";
-				};
-				partition@00040000 {
-					reg = <0x00080000 0x00040000>;
-					label = "U-Boot Config";
-				};
-				partition@000c0000 {
-					reg = <0x000c0000 0x00140000>;
-					label = "NAS Config";
-				};
-			};
-		};
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-};
diff -ruN a/arch/arm/mach-kirkwood/bubba3-gpio.c b/arch/arm/mach-kirkwood/bubba3-gpio.c
--- a/arch/arm/mach-kirkwood/bubba3-gpio.c	1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/bubba3-gpio.c	2013-09-06 05:02:11.765210478 -0600
@@ -0,0 +1,392 @@
+/*
+ * Excito BUBBA|3 led driver.
+ *
+ * Copyright (C) 2010 Excito Elektronik i Skåne AB
+ * Author: "Tor Krill" <tor@excito.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This driver provides an interface to the GPIO functionality on BUBBA|3
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/bubba3.h>
+#include <asm/mach-types.h>
+
+/* Mark this file for ident */
+static char* ver="0.1";
+static char* build=__DATE__ " " __TIME__;
+
+#define DEVNAME "bubbatwo"
+#define LED_DEFAULT_FREQ 0x8000
+
+/* Meta information for this module */
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Tor Krill <tor@excito.com>");
+MODULE_DESCRIPTION("BUBBA|3 led driver");
+
+/* Forwards */
+static int b3_probe(struct platform_device  *dev);
+static int b3_remove(struct platform_device *dev);
+static void b3_led_on(void);
+
+#define MODE_OFF	0
+#define MODE_BLINK	1
+#define MODE_LIT	2
+#define BUZZ_OFF	0
+#define BUZZ_ON		1
+#define LED_BLUE	0
+#define LED_RED		1
+#define LED_GREEN	2
+#define LED_BOOT	3
+#define LED_INSTALL	LED_GREEN
+
+struct b3_stateinfo{
+	u32 mode;
+	u32 freq;
+	u32 buzz;
+	u32 color;
+};
+
+static struct b3_stateinfo b3_data;
+
+static void b3_led_reset(void)
+{
+	gpio_set_value(B3_LED_INTERVAL,0);
+	udelay(1800);
+	gpio_set_value(B3_LED_INTERVAL,1);
+	udelay(10);
+	gpio_set_value(B3_LED_INTERVAL,0);
+	udelay(1800);
+}
+
+static void b3_led_train_start(void)
+{
+	gpio_set_value(B3_LED_INTERVAL,1);
+	udelay(10);
+	gpio_set_value(B3_LED_INTERVAL,0);
+	udelay(10);
+	gpio_set_value(B3_LED_INTERVAL,1);
+	udelay(10);
+	gpio_set_value(B3_LED_INTERVAL,0);
+	udelay(1800);
+}
+
+static void b3_led_train_end(void)
+{
+	gpio_set_value(B3_LED_INTERVAL,1);
+	udelay(10);
+	gpio_set_value(B3_LED_INTERVAL,0);
+	udelay(10);
+	gpio_set_value(B3_LED_INTERVAL,1);
+	udelay(10);
+	gpio_set_value(B3_LED_INTERVAL,0);
+	udelay(10);
+	gpio_set_value(B3_LED_INTERVAL,1);
+	udelay(10);
+	gpio_set_value(B3_LED_INTERVAL,0);
+	udelay(1800);
+}
+
+static void b3_led_color(u32 color){
+	gpio_set_value(B3_FRONT_LED_RED,0);
+	gpio_set_value(B3_FRONT_LED_BLUE,0);
+	gpio_set_value(B3_FRONT_LED_GREEN,0);
+
+	switch(color){
+	case LED_BOOT:
+		gpio_set_value(B3_FRONT_LED_RED,1);
+		gpio_set_value(B3_FRONT_LED_BLUE,1);
+		break;
+	case LED_RED:
+		gpio_set_value(B3_FRONT_LED_RED,1);
+		break;
+	case LED_GREEN:
+		gpio_set_value(B3_FRONT_LED_GREEN,1);
+		break;
+	case LED_BLUE:
+	default:
+		gpio_set_value(B3_FRONT_LED_BLUE,1);
+		break;
+	}
+}
+
+static void b3_led_on(void)
+{
+	b3_led_color(b3_data.color);
+
+	b3_led_reset();
+
+	b3_led_train_start();
+	/* NOOP, pass through mode */
+	b3_led_train_end();
+
+	gpio_set_value(B3_LED_INTERVAL,1);
+}
+
+static void b3_led_off(void)
+{
+	gpio_set_value(B3_FRONT_LED_RED,0);
+	gpio_set_value(B3_FRONT_LED_BLUE,0);
+	gpio_set_value(B3_FRONT_LED_GREEN,0);
+
+	b3_led_reset();
+}
+
+static void b3_buzz_on(void)
+{
+	gpio_set_value(B3_BUZZER_ENABLE,1);
+}
+
+static void b3_buzz_off(void)
+{
+	gpio_set_value(B3_BUZZER_ENABLE,0);
+}
+
+
+static struct platform_device *b3_device;
+
+static struct platform_driver b3_driver = {
+		.driver = {
+				.name = DEVNAME,
+				.owner = THIS_MODULE,
+		},
+		.probe = b3_probe,
+		.remove = b3_remove,
+};
+
+static ssize_t	b3_show_ledmode(struct device *dev, struct device_attribute *attr, char *buffer)
+{
+	ssize_t len = 0;
+	switch(b3_data.mode){
+	case MODE_OFF:
+		len = sprintf (buffer+len, "off");
+		break;
+	case MODE_BLINK:
+		len = sprintf (buffer+len, "blink");
+		break;
+	case MODE_LIT:
+		len = sprintf (buffer+len, "lit");
+		break;
+	default:
+		len = sprintf (buffer+len, "unknown");
+	}
+
+	return len;
+}
+
+static ssize_t b3_store_ledmode(struct device *dev, struct device_attribute *attr,const char *buffer, size_t size)
+{
+
+	if(size<1){
+		return -EINVAL;
+	}
+	/* Do a nasty shortcut here only look at first char */
+	switch(buffer[0]){
+	case 'o':
+		b3_data.mode=MODE_OFF;
+		b3_led_off ();
+		break;
+	case 'b':
+		/* For now we dont allow blink. */
+	case 'l':
+		b3_data.mode=MODE_LIT;
+		b3_led_on ();
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return size;
+}
+
+static ssize_t	b3_show_ledfreq(struct device *dev, struct device_attribute *attr, char *buffer)
+{
+	ssize_t len = 0;
+
+	len = sprintf (buffer+len, "%u", b3_data.freq);
+
+	return len;
+}
+
+static ssize_t b3_store_ledfreq(struct device *dev, struct device_attribute *attr,const char *buffer, size_t size)
+{
+
+	b3_data.freq = simple_strtoul(buffer,NULL,0);
+
+	return size;
+}
+
+static ssize_t	b3_show_buzzer(struct device *dev, struct device_attribute *attr, char *buffer)
+{
+	ssize_t len = 0;
+
+	len = sprintf (buffer+len, "%u", b3_data.buzz);
+
+	return len;
+}
+
+static ssize_t b3_store_buzzer(struct device *dev, struct device_attribute *attr,const char *buffer, size_t size)
+{
+
+	b3_data.buzz = simple_strtoul(buffer,NULL,0);
+
+	b3_data.buzz = (b3_data.buzz>0) ? BUZZ_ON : BUZZ_OFF;
+
+	if(b3_data.buzz==BUZZ_ON){
+		b3_buzz_on();
+	}else{
+		b3_buzz_off();
+	}
+
+	return size;
+}
+
+static ssize_t	b3_show_color(struct device *dev, struct device_attribute *attr, char *buffer)
+{
+	ssize_t len = 0;
+
+	len = sprintf (buffer+len, "%u", b3_data.color);
+
+	return len;
+}
+
+static ssize_t b3_store_color(struct device *dev, struct device_attribute *attr,const char *buffer, size_t size)
+{
+
+	b3_data.color = simple_strtoul(buffer,NULL,0);
+
+	b3_data.color = (b3_data.color>LED_BOOT) ? LED_BOOT : b3_data.color;
+
+	b3_led_color(b3_data.color);
+
+	return size;
+}
+
+static struct gpio bubba_gpios[] = {
+#ifdef CONFIG_BUBBA3_INSTALL
+	{ B3_FRONT_LED_RED, GPIOF_OUT_INIT_LOW, "Red LED"},
+	{ B3_FRONT_LED_BLUE, GPIOF_OUT_INIT_LOW, "Blue LED"},
+	{ B3_FRONT_LED_GREEN, GPIOF_OUT_INIT_HIGH, "Green LED"},
+#else
+	{ B3_FRONT_LED_RED, GPIOF_OUT_INIT_HIGH, "Red LED"},
+	{ B3_FRONT_LED_BLUE, GPIOF_OUT_INIT_HIGH, "Blue LED"},
+	{ B3_FRONT_LED_GREEN, GPIOF_OUT_INIT_LOW, "Green LED"},
+#endif
+	{ B3_LED_INTERVAL, GPIOF_OUT_INIT_HIGH, "LED interval"},
+	{ B3_BUZZER_ENABLE, GPIOF_OUT_INIT_LOW, "Buzzer"}
+};
+
+static int request_ioresources(void)
+{
+
+	if(gpio_request_array(bubba_gpios, ARRAY_SIZE(bubba_gpios))<0){
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+DEVICE_ATTR(ledmode, 0644, b3_show_ledmode, b3_store_ledmode);
+DEVICE_ATTR(ledfreq, 0644, b3_show_ledfreq, b3_store_ledfreq);
+DEVICE_ATTR(buzzer, 0644, b3_show_buzzer, b3_store_buzzer);
+DEVICE_ATTR(color, 0644, b3_show_color, b3_store_color);
+
+static int b3_probe(struct platform_device *dev)
+{
+	int ret=0;
+
+	if(request_ioresources()){
+		return -EINVAL;
+	}
+
+	ret = device_create_file(&b3_device->dev, &dev_attr_ledmode);
+	if(ret){
+		return -EINVAL;
+	}
+
+	ret = device_create_file(&b3_device->dev, &dev_attr_ledfreq);
+	if(ret){
+		device_remove_file(&b3_device->dev, &dev_attr_ledmode);
+		return -EINVAL;
+	}
+
+	ret = device_create_file(&b3_device->dev, &dev_attr_buzzer);
+	if(ret){
+		device_remove_file(&b3_device->dev, &dev_attr_ledfreq);
+		device_remove_file(&b3_device->dev, &dev_attr_ledmode);
+		return -EINVAL;
+	}
+
+	ret = device_create_file(&b3_device->dev, &dev_attr_color);
+	if(ret){
+		device_remove_file(&b3_device->dev, &dev_attr_buzzer);
+		device_remove_file(&b3_device->dev, &dev_attr_ledfreq);
+		device_remove_file(&b3_device->dev, &dev_attr_ledmode);
+		return -EINVAL;
+	}
+
+	b3_data.mode = MODE_LIT;
+	b3_data.freq = LED_DEFAULT_FREQ;
+	b3_data.buzz = BUZZ_OFF;
+#ifdef CONFIG_BUBBA3_INSTALL
+	b3_data.color = LED_INSTALL;
+#else
+	b3_data.color = LED_BOOT;
+#endif
+	return ret;
+}
+
+static int b3_remove(struct platform_device *dev)
+{
+
+	device_remove_file (&b3_device->dev, &dev_attr_ledmode);
+	device_remove_file (&b3_device->dev, &dev_attr_ledfreq);
+	device_remove_file(&b3_device->dev, &dev_attr_buzzer);
+	device_remove_file(&b3_device->dev, &dev_attr_color);
+
+	gpio_free_array(bubba_gpios, ARRAY_SIZE(bubba_gpios));
+	return 0;
+}
+
+static int __init bubba3_init(void){
+        int result;
+
+        if(!machine_is_bubba3()){
+                return -EINVAL;
+        }
+ 
+
+        result = platform_driver_register(&b3_driver);
+        if (result < 0) {
+                printk(KERN_ERR "bubba3: Failed to register driver\n");
+                return result;
+        }
+
+		b3_device = platform_device_alloc(DEVNAME,-1);
+		platform_device_add(b3_device);
+
+		printk(KERN_INFO "BUBBA3: driver ver %s (build %s) loaded\n",ver,build);
+
+        return result;
+
+}
+
+static void __exit bubba3_cleanup(void){
+
+        platform_device_del(b3_device);
+        platform_driver_unregister(&b3_driver);
+
+        printk(KERN_INFO "bubba3 driver removed\n");
+
+}
+/* register init and cleanup functions */
+module_init(bubba3_init);
+module_exit(bubba3_cleanup);
diff -ruN a/arch/arm/mach-kirkwood/bubba3-setup.c b/arch/arm/mach-kirkwood/bubba3-setup.c
--- a/arch/arm/mach-kirkwood/bubba3-setup.c	1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/bubba3-setup.c	2013-09-06 04:59:48.925126133 -0600
@@ -0,0 +1,234 @@
+/*
+ * arch/arm/mach-kirkwood/bubba3-setup.c
+ * based on
+ * arch/arm/mach-kirkwood/rd88f6281-setup.c
+ *
+ * For Bubba3 miniserver from Excito
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/bubba3.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/kirkwood.h>
+#include <plat/orion-gpio.h>
+#include <mach/bridge-regs.h>
+#include <plat/time.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * 2048KB SPI Flash on Boot Device (Numonyx MP25P16)
+ ****************************************************************************/
+
+static struct mtd_partition bubba3_flash_parts[] = {
+	{
+		.name = "u-boot",
+		.size = SZ_512K+SZ_256K,
+		.offset = 0,
+	},
+	{
+		.name = "env",
+		.size = SZ_128K,
+		.offset = MTDPART_OFS_NXTBLK,
+	},
+	{
+		.name = "data",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_NXTBLK,
+	},
+};
+
+static const struct flash_platform_data bubba3_flash = {
+	.type		= "m25p16",
+	.name		= "spi_flash",
+	.parts		= bubba3_flash_parts,
+	.nr_parts	= ARRAY_SIZE(bubba3_flash_parts),
+};
+
+static struct spi_board_info __initdata bubba3_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &bubba3_flash,
+		.irq		= -1,
+		.max_speed_hz	= 40000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+/*****************************************************************************
+ * GPIO and keys
+ ****************************************************************************/
+
+static struct gpio_keys_button bubba3_buttons[] = {
+	[0] = {
+		.code		= KEY_POWER,
+		.gpio		= B3_POWER_BUTTON,
+		.desc		= "Power button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data bubba3_button_data = {
+	.buttons	= bubba3_buttons,
+	.nbuttons	= ARRAY_SIZE(bubba3_buttons),
+};
+
+static struct platform_device bubba3_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data 	= &bubba3_button_data,
+	},
+};
+
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data bubba3_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0x08),
+	/* in case a hardcoded MAC address is needed uncomment next line */
+	/* .mac_addr	= {0x00, 0x0c, 0xc6, 0x76, 0x76, 0x2b}, */
+};
+
+static struct mv643xx_eth_platform_data bubba3_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0x18),
+	/* in case a hardcoded MAC address is needed uncomment next line */
+	/* .mac_addr	= {0x00, 0x0c, 0xc6, 0x76, 0x76, 0x2c}, */
+};
+
+static struct mv_sata_platform_data bubba3_sata_data = {
+	.n_ports	= 2,
+};
+
+/*****************************************************************************
+ * Timer
+ ****************************************************************************/
+
+static unsigned int bubba3_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP6_SYSRST_OUTn,
+	MPP7_PEX_RST_OUTn,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_GPO,
+	MPP13_UART1_TXD,
+	MPP14_UART1_RXD,
+	MPP15_SATA0_ACTn,
+	MPP16_SATA1_ACTn,
+	MPP17_SATA0_PRESENTn,
+	MPP18_GPO,
+	MPP19_GPO,
+	MPP20_GE1_TXD0,
+	MPP21_GE1_TXD1,
+	MPP22_GE1_TXD2,
+	MPP23_GE1_TXD3,
+	MPP24_GE1_RXD0,
+	MPP25_GE1_RXD1,
+	MPP26_GE1_RXD2,
+	MPP27_GE1_RXD3,
+	MPP28_GPIO,
+	MPP29_GPIO,
+	MPP30_GE1_RXCTL,
+	MPP31_GE1_RXCLK,
+	MPP32_GE1_TCLKOUT,
+	MPP33_GE1_TXCTL,
+	MPP34_GPIO,
+	MPP35_GPIO,
+	MPP36_GPIO,
+	MPP37_GPIO,
+	MPP38_GPIO,
+	MPP39_GPIO,
+	MPP40_GPIO,
+	MPP41_GPIO,
+	MPP42_GPIO,
+	MPP43_GPIO,
+	MPP44_GPIO,
+	MPP45_GPIO,
+	MPP46_GPIO,
+	MPP47_GPIO,
+	MPP48_GPIO,
+	MPP49_GPIO,
+	0
+};
+
+static void __init bubba3_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	kirkwood_mpp_conf(bubba3_mpp_config);
+
+	kirkwood_uart0_init();
+
+	spi_register_board_info(bubba3_spi_slave_info,
+				ARRAY_SIZE(bubba3_spi_slave_info));
+	kirkwood_spi_init();
+
+	kirkwood_i2c_init();
+
+	platform_device_register(&bubba3_gpio_buttons);
+
+	/* eth0 */
+	kirkwood_ge00_init(&bubba3_ge00_data);
+
+	/* eth1 */
+	if (gpio_request(28, "PHY2 reset") != 0 ||
+		gpio_direction_input(28) != 0) // high-z
+		printk(KERN_ERR "can't deassert GPIO 28 (PHY2 reset)\n");
+	else
+		kirkwood_ge01_init(&bubba3_ge01_data);
+
+	kirkwood_sata_init(&bubba3_sata_data);
+
+	kirkwood_ehci_init();
+
+}
+
+static int __init bubba3_pci_init(void)
+{
+	if (machine_is_bubba3())
+		kirkwood_pcie_init( KW_PCIE0 | KW_PCIE1 );
+
+	return 0;
+}
+subsys_initcall(bubba3_pci_init);
+
+MACHINE_START(BUBBA3, "BUBBA3 Kirkwood based miniserver")
+	/* Maintainer: Tor Krill <tor@excito.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= bubba3_init,
+	.map_io		= kirkwood_map_io,
+	.init_early 	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+        .init_time      = kirkwood_timer_init,
+        .restart        = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
--- a/arch/arm/mach-kirkwood/common.h	2013-08-29 10:47:51.000000000 -0600
+++ b/arch/arm/mach-kirkwood/common.h	2013-09-06 04:59:48.935128810 -0600
@@ -77,12 +77,6 @@
 static inline void dnskw_init(void) {};
 #endif
 
-#ifdef CONFIG_MACH_ICONNECT_DT
-void iconnect_init(void);
-#else
-static inline void iconnect_init(void) {};
-#endif
-
 #ifdef CONFIG_MACH_IB62X0_DT
 void ib62x0_init(void);
 #else
@@ -95,12 +89,6 @@
 static inline void dockstar_dt_init(void) {};
 #endif
 
-#ifdef CONFIG_MACH_GOFLEXNET_DT
-void goflexnet_init(void);
-#else
-static inline void goflexnet_init(void) {};
-#endif
-
 #ifdef CONFIG_MACH_LSXL_DT
 void lsxl_init(void);
 #else
diff -ruN a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
--- a/arch/arm/mach-kirkwood/dockstar-setup.c	2013-08-29 10:47:51.000000000 -0600
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c	2013-09-06 04:59:48.935128810 -0600
@@ -28,6 +28,10 @@
 		.offset = 0,
 		.size = SZ_1M
 	}, {
+		.name = "pogoplug",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_32M
+	}, {
 		.name = "uImage",
 		.offset = MTDPART_OFS_NXTBLK,
 		.size = SZ_4M
@@ -44,17 +48,17 @@
 
 static struct gpio_led dockstar_led_pins[] = {
 	{
-		.name			= "dockstar:green:health",
+		.name			= "status:green:health",
 		.default_trigger	= "default-on",
 		.gpio			= 46,
 		.active_low		= 1,
 	},
 	{
-		.name			= "dockstar:orange:misc",
+		.name			= "status:orange:fault",
 		.default_trigger	= "none",
 		.gpio			= 47,
 		.active_low		= 1,
-	},
+	}
 };
 
 static struct gpio_led_platform_data dockstar_led_data = {
@@ -72,8 +76,8 @@
 
 static unsigned int dockstar_mpp_config[] __initdata = {
 	MPP29_GPIO,	/* USB Power Enable */
-	MPP46_GPIO,	/* LED green */
-	MPP47_GPIO,	/* LED orange */
+	MPP46_GPIO,	/* LED Green */
+	MPP47_GPIO,	/* LED Orange */
 	0
 };
 
diff -ruN a/arch/arm/mach-kirkwood/goflexhome-setup.c b/arch/arm/mach-kirkwood/goflexhome-setup.c
--- a/arch/arm/mach-kirkwood/goflexhome-setup.c	1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/goflexhome-setup.c	2013-09-06 04:59:48.935128810 -0600
@@ -0,0 +1,124 @@
+/*
+ * arch/arm/mach-kirkwood/goflexhome-setup.c
+ *
+ * Seagate GoFlex Home Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition goflexhome_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_2M + SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data goflexhome_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data goflexhome_sata_data = {
+	.n_ports	= 1,
+};
+
+static struct gpio_led goflexhome_led_pins[] = {
+	{
+		.name			= "status:green:health",
+		.default_trigger	= "default-on",
+		.gpio			= 46,
+		.active_low		= 1,
+	},
+	{
+		.name			= "status:orange:fault",
+		.default_trigger	= "none",
+		.gpio			= 47,
+		.active_low		= 1,
+	},
+	{
+		.name			= "status:white:misc",
+		.default_trigger	= "ide-disk",
+		.gpio			= 40,
+		.active_low		= 0,
+	}
+};
+
+static struct gpio_led_platform_data goflexhome_led_data = {
+	.leds		= goflexhome_led_pins,
+	.num_leds	= ARRAY_SIZE(goflexhome_led_pins),
+};
+
+static struct platform_device goflexhome_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &goflexhome_led_data,
+	}
+};
+
+static unsigned int goflexhome_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP47_GPIO,	/* LED Orange */
+	MPP46_GPIO,	/* LED Green */
+	MPP40_GPIO,	/* LED White */
+	0
+};
+
+static void __init goflexhome_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	/* setup gpio pin select */
+	kirkwood_mpp_conf(goflexhome_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(goflexhome_nand_parts), 40);
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&goflexhome_ge00_data);
+	kirkwood_sata_init(&goflexhome_sata_data);
+
+	platform_device_register(&goflexhome_leds);
+}
+
+MACHINE_START(GOFLEXHOME, "Seagate GoFlex Home")
+	/* Maintainer: Peter Carmichael <peterjncarm@ovi.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= goflexhome_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time      = kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
+
diff -ruN a/arch/arm/mach-kirkwood/goflexnet-setup.c b/arch/arm/mach-kirkwood/goflexnet-setup.c
--- a/arch/arm/mach-kirkwood/goflexnet-setup.c	1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/goflexnet-setup.c	2013-09-06 04:59:48.945131365 -0600
@@ -0,0 +1,177 @@
+/*
+ * arch/arm/mach-kirkwood/goflexnet-setup.c
+ *
+ * Seagate GoFlex Net Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition goflexnet_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "pogoplug",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_32M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data goflexnet_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_led goflexnet_led_pins[] = {
+	{
+		.name			= "status:green:health",
+		.default_trigger	= "default-on",
+		.gpio			= 46, // 0x4000
+		.active_low		= 1,
+	},
+	{
+		.name			= "status:orange:fault",
+		.default_trigger	= "none",
+		.gpio			= 47, // 0x8000
+		.active_low		= 1,
+	},
+	{
+		.name			= "status:white:left0",
+		.default_trigger	= "none",
+		.gpio			= 42, // 0x0400
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:white:left1",
+		.default_trigger	= "none",
+		.gpio			= 43, // 0x0800
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:white:left2",
+		.default_trigger	= "none",
+		.gpio			= 44, // 0x1000
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:white:left3",
+		.default_trigger	= "none",
+		.gpio			= 45, // 0x2000
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:white:right0",
+		.default_trigger	= "none",
+		.gpio			= 38, // 0x0040
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:white:right1",
+		.default_trigger	= "none",
+		.gpio			= 39, // 0x0080
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:white:right2",
+		.default_trigger	= "none",
+		.gpio			= 40, // 0x0100
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:white:right3",
+		.default_trigger	= "none",
+		.gpio			= 41, // 0x0200
+		.active_low		= 0,
+	}
+};
+
+static struct gpio_led_platform_data goflexnet_led_data = {
+	.leds		= goflexnet_led_pins,
+	.num_leds	= ARRAY_SIZE(goflexnet_led_pins),
+};
+
+static struct platform_device goflexnet_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &goflexnet_led_data,
+	}
+};
+
+static unsigned int goflexnet_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP47_GPIO,	/* LED Orange */
+	MPP46_GPIO,	/* LED Green */
+	MPP45_GPIO,	/* LED Left Capacity 3 */
+	MPP44_GPIO,	/* LED Left Capacity 2 */
+	MPP43_GPIO,	/* LED Left Capacity 1 */
+	MPP42_GPIO,	/* LED Left Capacity 0 */
+	MPP41_GPIO,	/* LED Right Capacity 3 */
+	MPP40_GPIO,	/* LED Right Capacity 2 */
+	MPP39_GPIO,	/* LED Right Capacity 1 */
+	MPP38_GPIO,	/* LED Right Capacity 0 */
+	0
+};
+
+static void __init goflexnet_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	/* setup gpio pin select */
+	kirkwood_mpp_conf(goflexnet_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(goflexnet_nand_parts), 40);
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&goflexnet_ge00_data);
+	kirkwood_sata_init(&goflexnet_sata_data);
+
+	platform_device_register(&goflexnet_leds);
+}
+
+MACHINE_START(GOFLEXNET, "Seagate GoFlex Net")
+	/* Maintainer: Peter Carmichael <peterjncarm@ovi.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= goflexnet_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time      = kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
+
diff -ruN a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
--- a/arch/arm/mach-kirkwood/guruplug-setup.c	2013-08-29 10:47:51.000000000 -0600
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c	2013-09-06 04:59:48.945131365 -0600
@@ -59,22 +59,24 @@
 
 static struct gpio_led guruplug_led_pins[] = {
 	{
-		.name			= "guruplug:red:health",
+		.name			= "status:red:fault",
+		.default_trigger	= "none",
 		.gpio			= 46,
 		.active_low		= 1,
 	},
 	{
-		.name			= "guruplug:green:health",
+		.name			= "status:green:health",
+		.default_trigger	= "default-on",
 		.gpio			= 47,
 		.active_low		= 1,
 	},
 	{
-		.name			= "guruplug:red:wmode",
+		.name			= "status:red:wmode",
 		.gpio			= 48,
 		.active_low		= 1,
 	},
 	{
-		.name			= "guruplug:green:wmode",
+		.name			= "status:green:wmode",
 		.gpio			= 49,
 		.active_low		= 1,
 	},
diff -ruN a/arch/arm/mach-kirkwood/iconnect-setup.c b/arch/arm/mach-kirkwood/iconnect-setup.c
--- a/arch/arm/mach-kirkwood/iconnect-setup.c	1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/iconnect-setup.c	2013-09-06 04:59:48.945131365 -0600
@@ -0,0 +1,204 @@
+/*
+ * arch/arm/mach-kirkwood/iconnect-setup.c
+ *
+ * Iomega iConnect Wireless
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition iconnect_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_1M + SZ_2M
+	}, {
+		.name = "rootfs",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_32M,
+	}, {
+		.name = "data",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data iconnect_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
+};
+
+static struct gpio_led iconnect_led_pins[] = {
+	{
+		.name			= "iconnect:led_level",
+		.default_trigger	= "default-on",
+		.gpio			= 41,
+	},
+	{
+		.name			= "iconnect:blue:power",
+		.default_trigger	= "default-on",
+		.gpio			= 42,
+	},
+	{
+		.name			= "iconnect:red:power",
+		.gpio			= 43,
+	},
+	{
+		.name			= "iconnect:blue:usb1",
+		.gpio			= 44,
+	},
+	{
+		.name			= "iconnect:blue:usb2",
+		.gpio			= 45,
+	},
+	{
+		.name			= "iconnect:blue:usb3",
+		.gpio			= 46,
+	},
+	{
+		.name			= "iconnect:blue:usb4",
+		.gpio			= 47,
+	},
+	{
+		.name			= "iconnect:blue:otb",
+		.gpio			= 48,
+	},
+};
+
+static struct gpio_led_platform_data iconnect_led_data = {
+	.leds		= iconnect_led_pins,
+	.num_leds	= ARRAY_SIZE(iconnect_led_pins),
+};
+
+static struct platform_device iconnect_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &iconnect_led_data,
+	}
+};
+
+#define ICONNECT_GPIO_KEY_RESET		12
+#define ICONNECT_GPIO_KEY_OTB		35
+
+#define ICONNECT_SW_RESET		0x00
+#define ICONNECT_SW_OTB			0x01
+
+static struct gpio_keys_button iconnect_buttons[] = {
+		{
+		.type		= EV_SW,
+		.code		= ICONNECT_SW_RESET,
+		.gpio		= ICONNECT_GPIO_KEY_RESET,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+		.debounce_interval = 100,
+		}, 
+		{
+		.type		= EV_SW,
+		.code		= ICONNECT_SW_OTB,
+		.gpio		= ICONNECT_GPIO_KEY_OTB,
+		.desc		= "OTB Button",
+		.active_low	= 1,
+		.debounce_interval = 100,
+		},
+};
+
+static struct gpio_keys_platform_data iconnect_button_data = {
+	.buttons	= iconnect_buttons,
+	.nbuttons	= ARRAY_SIZE(iconnect_buttons),
+};
+
+static struct platform_device iconnect_button_device = {
+	.name	   = "gpio-keys",
+	.id	     = -1,
+	.num_resources	= 0,
+	.dev	    =	{
+					.platform_data  = &iconnect_button_data,
+					},
+};
+
+static unsigned int iconnect_mpp_config[] __initdata = {
+	MPP12_GPIO, /*Input for reset button*/
+	MPP35_GPIO, /*Input for OTB button*/
+	MPP41_GPIO,
+	MPP42_GPIO,
+	MPP43_GPIO,
+	MPP44_GPIO,
+	MPP45_GPIO,
+	MPP46_GPIO,
+	MPP47_GPIO,
+	MPP48_GPIO,
+	0
+};
+
+static struct i2c_board_info __initdata iconnect_i2c_rtc = {
+	I2C_BOARD_INFO("lm63", 0x4c),
+};
+
+static void __init iconnect_init(void)
+{
+	u32 dev, rev;
+
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(iconnect_mpp_config);
+
+	kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 40);
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&iconnect_ge00_data);
+	kirkwood_pcie_id(&dev, &rev);
+
+	kirkwood_uart0_init();
+
+	platform_device_register(&iconnect_leds);
+	platform_device_register(&iconnect_button_device);
+	
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, &iconnect_i2c_rtc, 1);
+
+}
+
+static int __init iconnect_pci_init(void)
+{
+	if (machine_is_iconnect())
+		kirkwood_pcie_init(KW_PCIE0);
+
+	return 0;
+}
+subsys_initcall(iconnect_pci_init);
+
+
+MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
+	.atag_offset	= 0x100,
+	.init_machine	= iconnect_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time      = kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/ionics-stratus-setup.c b/arch/arm/mach-kirkwood/ionics-stratus-setup.c
--- a/arch/arm/mach-kirkwood/ionics-stratus-setup.c	1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/ionics-stratus-setup.c	2013-09-06 04:59:48.945131365 -0600
@@ -0,0 +1,137 @@
+/*
+ * arch/arm/mach-kirkwood/ionics-stratus-setup.c
+ *
+ * Ionics Stratus Board Setup arcNumber 4184
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition ionics_stratus_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data ionics_stratus_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mvsdio_platform_data ionics_stratus_mvsdio_data = {
+	/* unfortunately the CD signal has not been connected */
+};
+
+static struct gpio_led ionics_stratus_led_pins[] = {
+	{
+		.name			= "status:green:led1",
+		.default_trigger	= "none",
+		.gpio			= 44,
+		.active_low		= 1,
+	},
+	{
+		.name           	= "status:green:led2",
+		.default_trigger    	= "none",
+		.gpio           	= 40,
+		.active_low     	= 1,
+	},
+	{
+		.name           	= "status:green:led3",
+		.default_trigger	= "default-on",
+		.gpio			= 36,
+		.active_low		= 1,
+	},
+        {
+                .name                   = "status:green:led4",
+                .default_trigger        = "default-on",
+                .gpio                   = 39,
+                .active_low             = 1,
+        },
+
+};
+
+static struct gpio_led_platform_data ionics_stratus_led_data = {
+	.leds		= ionics_stratus_led_pins,
+	.num_leds	= ARRAY_SIZE(ionics_stratus_led_pins),
+};
+
+static struct platform_device ionics_stratus_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+	.platform_data	= &ionics_stratus_led_data,
+	}
+};
+
+static unsigned int ionics_stratus_mpp_config[] __initdata = {
+	MPP21_GPIO,	/* USB PORT 1 Pw Enable */
+	MPP32_GPIO,	/* USB PORT 2 Pw Enable */
+	MPP48_GPIO,	/* WIFI Power Down */
+	MPP49_GPIO,	/* WIFI Host Wakeup */
+	MPP42_GPIO,	/* WIFI MAC Wakeup */
+	MPP44_GPIO,	/* LED 1 */
+	MPP40_GPIO,	/* LED 2 */
+	MPP36_GPIO,	/* LED 3 */
+	MPP39_GPIO,	/* LED 4 */
+	MPP23_GPIO,	/* BTN 1 */
+	MPP37_GPIO,	/* BTN 2 */
+	MPP38_GPIO,	/* BTN 3 */
+	0
+};
+
+static void __init ionics_stratus_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	/* setup gpio pin select */
+	kirkwood_mpp_conf(ionics_stratus_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(ionics_stratus_nand_parts), 25);
+
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&ionics_stratus_ge00_data);
+	kirkwood_sdio_init(&ionics_stratus_mvsdio_data);
+
+	platform_device_register(&ionics_stratus_leds);
+}
+
+MACHINE_START(IONICS_STRATUS, "Ionics Plug Computer Plus - Stratus")
+	/* Maintainer: Mike Brown <mbrown@archlinuxarm.org> */
+	.atag_offset	= 0x100,
+	.init_machine	= ionics_stratus_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time      = kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
--- a/arch/arm/mach-kirkwood/Kconfig	2013-08-29 10:47:51.000000000 -0600
+++ b/arch/arm/mach-kirkwood/Kconfig	2013-09-06 04:59:48.955133836 -0600
@@ -92,6 +92,12 @@
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell OpenRD Ultimate Board.
 
+config MACH_BUBBA3
+        bool "Bubba3 miniserver"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Bubba3 miniserver.
+
 config MACH_RD88F6192_NAS
 	bool "Marvell RD-88F6192-NAS Reference Board"
 	help
@@ -130,6 +136,66 @@
 	  QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
 	  NAS devices.
 
+config MACH_GOFLEXNET
+	bool "Seagate GoFlex Net"
+	help
+		Say 'Y' here if you want your kernel to support the
+		Seagate GoFlex Net.
+
+config MACH_GOFLEXHOME
+	bool "Seagate GoFlex Home"
+	help
+		Say 'Y' here if you want your kernel to support the
+		Seagate GoFlex Home.
+
+config MACH_ICONNECT
+	bool "Iomega iConnect Wireless"
+	help
+		Say 'Y' here if you want your kernel to support the
+		Iomega iConnect Wireless.
+
+config MACH_POGOPLUGV4
+	bool "Pogoplug Series 4"
+	help
+		Say 'Y' here if you want your kernel to support the
+		Pogoplug Series 4.
+
+config MACH_POGO_E02
+	bool "CE Pogoplug E02"
+	help
+		Say 'Y' here if you want your kernel to support the
+		CloudEngines Pogoplug e02.
+
+config MACH_NAS6210
+	bool "RaidSonic ICY BOX IB-NAS6210"
+	help
+		Say 'Y' here if you want your kernel to support the
+		RaidSonic ICY BOX IB-NAS6210 device.
+
+config MACH_TOPKICK
+	bool "USI Topkick"
+	help
+		Say 'Y' here if you want your kernel to support the
+		USI Topkick.
+
+config MACH_IONICS_STRATUS
+	bool "Ionics Stratus"
+	help
+		Say 'Y' here if you want your kernel to support the
+		Ionics Stratus.
+
+config MACH_NSA310
+   bool "ZyXEL NSA310 1-Bay Power Media Server"
+   help
+     Say 'Y' here if you want your kernel to support the
+     ZyXEL NSA310.
+
+config MACH_NSA320
+   bool "ZyXEL NSA320 2-Bay Power Media Server"
+   help
+     Say 'Y' here if you want your kernel to support the
+     ZyXel NSA320.
+
 comment "Device tree entries"
 
 config ARCH_KIRKWOOD_DT
@@ -161,13 +227,6 @@
 	  Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
 	  using Flattened Device Tree.
 
-config MACH_DOCKSTAR_DT
-	bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Seagate FreeAgent Dockstar (Flattened Device Tree).
-
 config MACH_DREAMPLUG_DT
 	bool "Marvell DreamPlug (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT
@@ -175,13 +234,6 @@
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell DreamPlug (Flattened Device Tree).
 
-config MACH_GOFLEXNET_DT
-	bool "Seagate GoFlex Net (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Seagate GoFlex Net (Flattened Device Tree).
-
 config MACH_GURUPLUG_DT
 	bool "Marvell GuruPlug Reference Board (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT
@@ -197,12 +249,6 @@
 	  RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
 	  Flattened Device Tree.
 
-config MACH_ICONNECT_DT
-	bool "Iomega Iconnect (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here to enable Iomega Iconnect support.
-
 config MACH_INETSPACE_V2_DT
 	bool "LaCie Internet Space v2 NAS (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT
@@ -303,20 +349,6 @@
 	  Say 'Y' here if you want your kernel to support the
 	  USI Topkick, using Flattened Device Tree
 
-config MACH_TS219_DT
-	bool "Device Tree for QNAP TS-11X, TS-21X NAS"
-	select ARCH_KIRKWOOD_DT
-	select ARM_APPENDED_DTB
-	select ARM_ATAG_DTB_COMPAT
-	help
-	  Say 'Y' here if you want your kernel to support the QNAP
-	  TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
-	  TS-219P+ Turbo NAS devices using Fattened Device Tree.
-	  There are two different Device Tree descriptions, depending
-	  on if the device is based on an if the board uses the MV6281
-	  or MV6282. If you have the wrong one, the buttons will not
-	  work.
-
 endmenu
 
 endif
diff -ruN a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
--- a/arch/arm/mach-kirkwood/Makefile	2013-08-29 10:47:51.000000000 -0600
+++ b/arch/arm/mach-kirkwood/Makefile	2013-09-06 04:59:48.955133836 -0600
@@ -18,16 +18,25 @@
 obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
+obj-$(CONFIG_MACH_GOFLEXNET)		+= goflexnet-setup.o
+obj-$(CONFIG_MACH_GOFLEXHOME)		+= goflexhome-setup.o
+obj-$(CONFIG_MACH_ICONNECT)		+= iconnect-setup.o
+obj-$(CONFIG_MACH_POGOPLUGV4)		+= pogoplugv4-setup.o
+obj-$(CONFIG_MACH_POGO_E02)		+= pogo_e02-setup.o
+obj-$(CONFIG_MACH_NAS6210)		+= nas6210-setup.o
+obj-$(CONFIG_MACH_TOPKICK)		+= topkick-setup.o
+obj-$(CONFIG_MACH_IONICS_STRATUS)	+= ionics-stratus-setup.o
+obj-$(CONFIG_MACH_BUBBA3)               += bubba3-setup.o bubba3-gpio.o
+obj-$(CONFIG_MACH_NSA310)		+= nsa310-setup.o
+obj-$(CONFIG_MACH_NSA320)		+= nsa320-setup.o
 
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)		+= board-dt.o
 obj-$(CONFIG_MACH_CLOUDBOX_DT)		+= board-ns2.o
 obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o
 obj-$(CONFIG_MACH_DOCKSTAR_DT)		+= board-dockstar.o
 obj-$(CONFIG_MACH_DREAMPLUG_DT)		+= board-dreamplug.o
-obj-$(CONFIG_MACH_GOFLEXNET_DT)		+= board-goflexnet.o
 obj-$(CONFIG_MACH_GURUPLUG_DT)		+= board-guruplug.o
 obj-$(CONFIG_MACH_IB62X0_DT)		+= board-ib62x0.o
-obj-$(CONFIG_MACH_ICONNECT_DT)		+= board-iconnect.o
 obj-$(CONFIG_MACH_INETSPACE_V2_DT)	+= board-ns2.o
 obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT)	+= board-iomega_ix2_200.o
 obj-$(CONFIG_MACH_KM_KIRKWOOD_DT)	+= board-km_kirkwood.o
@@ -37,8 +46,6 @@
 obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT)	+= board-ns2.o
 obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT)	+= board-ns2.o
 obj-$(CONFIG_MACH_NETSPACE_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_NSA310_DT)		+= board-nsa310.o
 obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT)	+= board-openblocks_a6.o
 obj-$(CONFIG_MACH_READYNAS_DT)		+= board-readynas.o
 obj-$(CONFIG_MACH_TOPKICK_DT)		+= board-usi_topkick.o
-obj-$(CONFIG_MACH_TS219_DT)		+= board-ts219.o tsx1x-common.o
diff -ruN a/arch/arm/mach-kirkwood/nas6210-setup.c b/arch/arm/mach-kirkwood/nas6210-setup.c
--- a/arch/arm/mach-kirkwood/nas6210-setup.c	1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/nas6210-setup.c	2013-09-06 04:59:48.955133836 -0600
@@ -0,0 +1,186 @@
+/*
+ * arch/arm/mach-kirkwood/nas6210-setup.c
+ *
+ * Raidsonic ICYBOX NAS6210 Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+#define NAS6210_GPIO_POWER_OFF	24
+
+static struct mtd_partition nas6210_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = 6*SZ_1M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data nas6210_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data nas6210_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_led nas6210_led_pins[] = {
+	{
+		.name			= "status:green:power",
+		.default_trigger	= "default-on",
+		.gpio			= 25,
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:red:power",
+		.default_trigger	= "none",
+		.gpio			= 22,
+		.active_low		= 0,
+	},
+	{
+		.name			= "status:red:usb_copy",
+		.default_trigger	= "none",
+		.gpio			= 27,
+		.active_low		= 0,
+	},
+};
+
+static struct gpio_led_platform_data nas6210_led_data = {
+	.leds		= nas6210_led_pins,
+	.num_leds	= ARRAY_SIZE(nas6210_led_pins),
+};
+
+static struct platform_device nas6210_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &nas6210_led_data,
+	}
+};
+
+static struct gpio_keys_button nas6210_buttons[] = {
+	{
+		.code		= KEY_COPY,
+		.gpio		= 29,
+		.desc		= "USB Copy",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 28,
+		.desc		= "Reset",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data nas6210_button_data = {
+	.buttons	= nas6210_buttons,
+	.nbuttons	= ARRAY_SIZE(nas6210_buttons),
+};
+
+static struct platform_device nas6210_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &nas6210_button_data,
+	}
+};
+
+static unsigned int nas6210_mpp_config[] __initdata = {
+	MPP0_NF_IO2,
+	MPP1_NF_IO3,
+	MPP2_NF_IO4,
+	MPP3_NF_IO5,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+ 	MPP22_GPIO,	/* Power LED red */
+	MPP24_GPIO,	/* Power off device */
+	MPP25_GPIO,	/* Power LED green */
+	MPP27_GPIO,	/* USB transfer LED */
+	MPP28_GPIO,	/* Reset button */
+	MPP29_GPIO,	/* USB Copy button */
+	0
+};
+
+static void nas6210_power_off(void)
+{
+	gpio_set_value(NAS6210_GPIO_POWER_OFF, 1);
+}
+
+static void __init nas6210_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(nas6210_mpp_config);
+
+	kirkwood_nand_init(ARRAY_AND_SIZE(nas6210_nand_parts), 25);
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&nas6210_ge00_data);
+	kirkwood_sata_init(&nas6210_sata_data);
+	kirkwood_uart0_init();
+	platform_device_register(&nas6210_leds);
+	platform_device_register(&nas6210_button_device);
+	if (gpio_request(NAS6210_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(NAS6210_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = nas6210_power_off;
+	else
+		pr_err("nas6210: failed to configure power-off GPIO\n");
+}
+
+static int __init nas6210_pci_init(void)
+{
+	if (machine_is_nas6210()) {
+		u32 dev, rev;
+ 
+		kirkwood_pcie_id(&dev, &rev);
+		if (dev == MV88F6282_DEV_ID)
+			kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
+		else
+			kirkwood_pcie_init(KW_PCIE0);
+	}
+
+	return 0;
+}
+subsys_initcall(nas6210_pci_init);
+
+MACHINE_START(NAS6210, "RaidSonic ICY BOX IB-NAS6210")
+	/* Maintainer: <gmbnomis at gmail dot com> */
+	.atag_offset	= 0x100,
+	.init_machine	= nas6210_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time      = kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/nsa310-setup.c b/arch/arm/mach-kirkwood/nsa310-setup.c
--- a/arch/arm/mach-kirkwood/nsa310-setup.c	1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/nsa310-setup.c	2013-09-06 04:59:48.965136025 -0600
@@ -0,0 +1,359 @@
+/*
+ * arch/arm/mach-kirkwood/nsa310-setup.c
+ *
+ * Zyxel NSA-310 Setup, by AA666 and Peeter123
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/mtd/partitions.h>
+#include <mtd/mtd-abi.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include <plat/orion-gpio.h>
+#include "common.h"
+#include "mpp.h"
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+
+static void nsa310_timerfunc(unsigned long data);
+static DEFINE_TIMER(timer, nsa310_timerfunc, 0, 0);
+
+static struct mtd_partition nsa310_nand_parts[] = {
+  {
+    .name = "uboot",
+    .offset = 0,
+    .size = 0x100000,
+    .mask_flags = MTD_WRITEABLE
+  }, {
+    .name = "uboot_env",
+    .offset = MTDPART_OFS_NXTBLK,
+    .size = 0x80000
+  }, {
+    .name = "key_store",
+    .offset = MTDPART_OFS_NXTBLK,
+    .size = 0x80000
+  }, {
+    .name = "info",
+    .offset = MTDPART_OFS_NXTBLK,
+    .size = 0x80000
+  }, {
+    .name = "etc",
+    .offset = MTDPART_OFS_NXTBLK,
+    .size = 0xA00000
+  }, {
+    .name = "kernel_1",
+    .offset = MTDPART_OFS_NXTBLK,
+    .size = 0xA00000
+  }, {
+    .name = "rootfs1",
+    .offset = MTDPART_OFS_NXTBLK,
+    .size = 0x2FC0000
+  }, {
+    .name = "kernel_2",
+    .offset = MTDPART_OFS_NXTBLK,
+    .size = 0xA00000
+  }, {
+    .name = "rootfs2",
+    .offset = MTDPART_OFS_NXTBLK,
+    .size = 0x2FC0000
+  },
+};
+
+static struct i2c_board_info __initdata nsa310_i2c_rtc = {
+        I2C_BOARD_INFO("pcf8563", 0x51),
+};
+
+static struct mv643xx_eth_platform_data nsa310_ge00_data = {
+  .phy_addr  = MV643XX_ETH_PHY_ADDR(0),
+  .speed    = SPEED_1000,
+  .duplex    = DUPLEX_FULL,
+};
+
+static struct mv_sata_platform_data nsa310_sata_data = {
+  .n_ports  = 2,
+};
+
+static unsigned int nsa310_mpp_config[] __initdata = {
+  MPP36_GPIO, // Reset button
+  MPP37_GPIO, // Copy button
+  MPP46_GPIO, // Power button
+
+  MPP48_GPIO, // Power Off
+  MPP21_GPIO, // USB Power Off
+
+  MPP28_GPIO, // Sys LED Green
+  MPP29_GPIO, // Sys LED Yellow
+  MPP41_GPIO, // SATA1 LED Green
+  MPP42_GPIO, // SATA1 LED Red
+  MPP12_GPO, // SATA2 LED Green
+  MPP13_GPIO, // SATA2 LED Red
+  MPP39_GPIO, // Copy LED Green
+  MPP40_GPIO, // Copy LED Red
+  MPP15_GPIO, // USB LED Green
+
+  MPP14_GPIO, // MCU Data
+  MPP16_GPIO, // MCU Clk
+  MPP17_GPIO, // MCU Act
+
+  MPP38_GPIO, // VID B0
+  MPP45_GPIO, // VID B1
+
+  MPP44_GPIO, // Buzzer
+  MPP43_GPIO, // HTP
+
+  MPP47_GPIO, // Power Resume Data
+  MPP49_GPIO, // Power Resume Clock
+
+  0
+};
+
+static struct gpio_led nsa310_gpio_led[] = {
+        {
+            .name    = "nsa310:green:System",
+            .default_trigger  = "timer",
+            .gpio    = 28,
+            .active_low    = 0,
+
+        },
+  {
+            .name    = "nsa310:red:System",
+            .default_trigger  = "none",
+            .gpio    = 29,
+            .active_low    = 0,
+        },
+  {
+            .name    = "nsa310:green:SATA1",
+            .default_trigger  = "none",
+            .gpio    = 41,
+            .active_low    = 0,
+        },
+  {
+            .name    = "nsa310:red:SATA1",
+            .default_trigger  = "sata-disk",
+            .gpio    = 42,
+            .active_low    = 0,
+        },
+  {
+            .name    = "nsa310:green:SATA2",
+            .default_trigger  = "none",
+            .gpio    = 12,
+            .active_low    = 0,
+        },
+  {
+            .name    = "nsa310:red:SATA2",
+            .default_trigger  = "none",
+            .gpio    = 13,
+            .active_low    = 0,
+        },
+  {
+            .name    = "nsa310:green:USB",
+            .default_trigger  = "none",
+            .gpio    = 15,
+            .active_low    = 0,
+        },
+        {
+            .name    = "nsa310:green:Copy",
+            .default_trigger  = "none",
+            .gpio    = 39,
+            .active_low    = 0,
+        },
+  {
+            .name    = "nsa310:red:Copy",
+            .default_trigger  = "none",
+            .gpio    = 40,
+            .active_low    = 0,
+        },
+};
+
+
+static int nsa310_gpio_blink_set(unsigned gpio, int state,
+  unsigned long *delay_on, unsigned long *delay_off)
+{
+
+// Use hardware acceleration
+//    if (delay_on && delay_off && !*delay_on && !*delay_off)
+//  *delay_on = *delay_off = 100;
+
+  switch(state) {
+      case GPIO_LED_NO_BLINK_LOW:
+      case GPIO_LED_NO_BLINK_HIGH:
+    orion_gpio_set_blink(gpio, 0);
+    gpio_set_value(gpio, state);
+      break;
+      case GPIO_LED_BLINK:
+    orion_gpio_set_blink(gpio, 1);
+      break;
+  }
+  return 0;
+}
+
+
+static struct gpio_led_platform_data nsa310_led_data = {
+        .leds           = nsa310_gpio_led,
+        .num_leds       = ARRAY_SIZE(nsa310_gpio_led),
+  .gpio_blink_set  = nsa310_gpio_blink_set,
+};
+
+static struct platform_device nsa310_leds = {
+        .name   = "leds-gpio",
+        .id     = -1,
+        .dev    = { .platform_data  = &nsa310_led_data, }
+};
+
+static struct gpio_keys_button nsa310_gpio_keys_button[] = {
+        {
+            .code             = KEY_POWER,
+            .type    = EV_KEY,
+            .gpio             = 46,
+            .desc             = "Power Button",
+            .active_low       = 0,
+            .debounce_interval   = 1000,
+        },
+        {
+            .code             = KEY_COPY,
+            .type    = EV_KEY,
+            .gpio             = 37,
+            .desc             = "USB Copy",
+            .active_low       = 1,
+            .debounce_interval   = 1000,
+        },
+        {
+            .code             = KEY_OPTION,
+            .type    = EV_KEY,
+            .gpio             = 36,
+            .desc             = "Reset",
+            .active_low       = 1,
+            .debounce_interval   = 1000,
+        },
+};
+
+static struct gpio_keys_platform_data nsa310_keys_data = {
+        .buttons        = nsa310_gpio_keys_button,
+        .nbuttons       = ARRAY_SIZE(nsa310_gpio_keys_button),
+};
+
+
+static struct platform_device nsa310_buttons = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .dev            = { .platform_data  = &nsa310_keys_data, }
+};
+
+static void nsa310_power_off(void)
+{
+//
+//don't work with sysfs
+      printk(KERN_INFO "Activating power off GPIO pin...\n");
+  gpio_set_value(48, 1);
+
+// If machine goes to restart, uncomment next lines for infinite loop
+/*      printk(KERN_INFO "System halted, please turn off power manually\n");
+  gpio_set_value(28, 0);
+  do {
+      mdelay(1000);
+  } while(1);
+*/
+}
+
+static void nsa310_timerfunc(unsigned long data)
+{
+// Activate USB Power
+  if (gpio_request(21, "USB Power") != 0 || gpio_direction_output(21, 1) != 0)
+      printk(KERN_ERR "failed to setup USB power GPIO\n");
+  else
+          printk(KERN_INFO "USB power enabled\n");
+  gpio_free(21);
+}
+
+static void __init nsa310_init(void)
+{
+  u32 dev, rev;
+
+  kirkwood_init();
+
+  kirkwood_mpp_conf(nsa310_mpp_config);
+  kirkwood_nand_init(ARRAY_AND_SIZE(nsa310_nand_parts), 25);
+  kirkwood_ge00_init(&nsa310_ge00_data);
+  kirkwood_pcie_id(&dev, &rev);
+
+  kirkwood_sata_init(&nsa310_sata_data);
+  kirkwood_uart0_init();
+  kirkwood_i2c_init();
+        i2c_register_board_info(0, &nsa310_i2c_rtc, 1);
+
+  platform_device_register(&nsa310_leds);
+  platform_device_register(&nsa310_buttons);
+  
+  kirkwood_ehci_init();
+//  USB Power delay for 20 sec  
+  timer.function = nsa310_timerfunc;
+        timer.data = 0;
+  timer.expires = jiffies + msecs_to_jiffies(20000);
+  add_timer(&timer);
+
+
+/*  Power resume control */
+      gpio_request(49, "Power-clk");
+      gpio_direction_output(49, 1);
+      gpio_request(47, "Power-data");
+// Clear power resume
+//      gpio_direction_output(47, 0);
+// Set power resume
+      gpio_direction_output(47, 1);
+      udelay(1000);
+//      gpio_direction_output(49, 0);
+      gpio_set_value(49, 0);
+// release GPIO?
+//test
+      gpio_free(47);
+      gpio_free(49);
+          printk(KERN_INFO "Power resume enabled\n");
+
+
+// Activate Power-off GPIO
+  if (gpio_request(48, "Power-off") == 0 && gpio_direction_output(48, 0) == 0) {
+//          gpio_free(48);
+            pm_power_off = nsa310_power_off;
+          printk(KERN_INFO "Power-off GPIO enabled\n");
+      } else
+    printk(KERN_ERR "failed to configure Power-off GPIO\n");
+
+};
+
+static int __init nsa310_pci_init(void)
+{
+  if (machine_is_nsa310())
+    kirkwood_pcie_init(KW_PCIE0);
+  return 0;
+}
+
+subsys_initcall(nsa310_pci_init);
+
+MACHINE_START(NSA310, "Zyxel NSA-310")
+  .atag_offset  = 0x100,
+  .init_machine  = nsa310_init,
+  .map_io    = kirkwood_map_io,
+  .init_early    = kirkwood_init_early,
+  .init_irq    = kirkwood_init_irq,
+  .init_time      = kirkwood_timer_init,
+  .restart        = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/nsa320-setup.c b/arch/arm/mach-kirkwood/nsa320-setup.c
--- a/arch/arm/mach-kirkwood/nsa320-setup.c	1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/nsa320-setup.c	2013-09-06 04:59:48.965136025 -0600
@@ -0,0 +1,305 @@
+/*
+ * arch/arm/mach-kirkwood/nsa320-setup.c
+ *
+ * ZyXEL NSA320 2-Bay Power Media Server Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/nsa3xx-hwmon.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/orion-gpio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition nsa320_nand_parts[] = {
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = SZ_1M,
+		.mask_flags = MTD_WRITEABLE
+	}, {
+		.name = "uboot_env",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_512K
+	}, {
+		.name = "key_store",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_512K
+	}, {
+		.name = "info",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_512K
+	}, {
+		.name = "etc",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = 10 * SZ_1M
+	}, {
+		.name = "kernel_1",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = 10 * SZ_1M
+	}, {
+		.name = "rootfs1",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = 48 * SZ_1M - SZ_256K
+	}, {
+		.name = "kernel_2",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = 10 * SZ_1M
+	}, {
+		.name = "rootfs2",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = 48 * SZ_1M - SZ_256K
+	},
+};
+
+static struct i2c_board_info __initdata nsa320_i2c_rtc = {
+	I2C_BOARD_INFO("pcf8563", 0x51),
+};
+
+static struct mv643xx_eth_platform_data nsa320_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv_sata_platform_data nsa320_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_keys_button nsa320_button_pins[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 36,
+		.desc		= "Reset",
+		.active_low	= 1,
+		.debounce_interval	= 1000,
+	}, {
+		.code		= KEY_COPY,
+		.gpio		= 37,
+		.desc		= "Copy",
+		.active_low	= 1,
+		.debounce_interval	= 1000,
+	}, {
+		.code		= KEY_POWER,
+		.gpio		= 46,
+		.desc		= "Power",
+		.active_low	= 0,
+		.debounce_interval	= 1000,
+	},
+};
+
+static struct gpio_keys_platform_data nsa320_button_data = {
+	.buttons	= nsa320_button_pins,
+	.nbuttons	= ARRAY_SIZE(nsa320_button_pins),
+};
+
+static struct platform_device nsa320_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &nsa320_button_data,
+	},
+};
+
+static struct gpio_led nsa320_led_pins[] = {
+	{
+		.name			= "nsa320:green:hdd2",
+		.default_trigger	= "ide-disk",
+		.gpio			= 12,
+		.active_low		= 0,
+	}, {
+		.name			= "nsa320:red:hdd2",
+		.default_trigger	= "default-off",
+		.gpio			= 13,
+		.active_low		= 0,
+	}, {
+		.name			= "nsa320:green:usb",
+		.default_trigger	= "default-off",
+		.gpio			= 15,
+		.active_low		= 0,
+	}, {
+		.name			= "nsa320:green:sys",
+		.default_trigger	= "default-off",
+		.gpio			= 28,
+		.active_low		= 0,
+	}, {
+		.name			= "nsa320:orange:sys",
+		.default_trigger	= "default-on",
+		.gpio			= 29,
+		.active_low		= 0,
+	}, {
+		.name			= "nsa320:green:copy",
+		.default_trigger	= "default-off",
+		.gpio			= 39,
+		.active_low		= 0,
+	}, {
+		.name			= "nsa320:red:copy",
+		.default_trigger	= "default-off",
+		.gpio			= 40,
+		.active_low		= 0,
+	}, {
+		.name			= "nsa320:green:hdd1",
+		.default_trigger	= "ide-disk",
+		.gpio			= 41,
+		.active_low		= 0,
+	}, {
+		.name			= "nsa320:red:hdd1",
+		.default_trigger	= "default-off",
+		.gpio			= 42,
+		.active_low		= 0,
+	},
+};
+
+static int nsa320_gpio_blink_set(unsigned gpio, int state,
+	unsigned long *delay_on, unsigned long *delay_off)
+{
+	switch(state) {
+		case GPIO_LED_NO_BLINK_LOW:
+		case GPIO_LED_NO_BLINK_HIGH:
+			orion_gpio_set_blink(gpio, 0);
+			gpio_set_value(gpio, state);
+		break;
+		case GPIO_LED_BLINK:
+			orion_gpio_set_blink(gpio, 1);
+		break;
+	}
+	return 0;
+}
+
+static struct gpio_led_platform_data nsa320_led_data = {
+	.leds		= nsa320_led_pins,
+	.num_leds	= ARRAY_SIZE(nsa320_led_pins),
+	.gpio_blink_set	= nsa320_gpio_blink_set,
+};
+
+static struct platform_device nsa320_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &nsa320_led_data,
+	},
+};
+
+static struct nsa3xx_hwmon_platform_data nsa320_hwmon_data = {
+	/* GPIOs connected to Holtek HT46R065 MCU */
+	.act_pin  = 17,
+	.clk_pin  = 16,
+	.data_pin = 14,
+};
+
+static struct platform_device nsa320_hwmon = {
+	.name		= "nsa3xx-hwmon",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &nsa320_hwmon_data,
+	},
+};
+
+static unsigned int nsa320_mpp_config[] __initdata = {
+	MPP8_TW0_SDA,	/* PCF8563 RTC chip   */
+	MPP9_TW0_SCK,	/* connected to TWSI  */
+	MPP12_GPO,	/* HDD2 LED (green)   */
+	MPP13_GPIO,	/* HDD2 LED (red)     */
+	MPP14_GPIO,	/* MCU DATA pin (in)  */
+	MPP15_GPIO,	/* USB LED (green)    */
+	MPP16_GPIO,	/* MCU CLK pin (out)  */
+	MPP17_GPIO,	/* MCU ACT pin (out)  */
+	MPP21_GPIO,	/* USB power          */
+	MPP28_GPIO,	/* SYS LED (green)    */
+	MPP29_GPIO,	/* SYS LED (orange)   */
+	MPP36_GPIO,	/* reset button       */
+	MPP37_GPIO,	/* copy button        */
+	MPP38_GPIO,	/* VID B0             */
+	MPP39_GPIO,	/* COPY LED (green)   */
+	MPP40_GPIO,	/* COPY LED (red)     */
+	MPP41_GPIO,	/* HDD1 LED (green)   */
+	MPP42_GPIO,	/* HDD1 LED (red)     */
+	MPP43_GPIO,	/* HTP pin            */
+	MPP44_GPIO,	/* buzzer             */
+	MPP45_GPIO,	/* VID B1             */
+	MPP46_GPIO,	/* power button       */
+	MPP47_GPIO,	/* power resume data  */
+	MPP48_GPIO,	/* power off          */
+	MPP49_GPIO,	/* power resume clock */
+	0
+};
+
+#define NSA320_GPIO_USB_POWER	21
+#define NSA320_GPIO_POWER_OFF	48
+
+static void nsa320_power_off(void)
+{
+	gpio_set_value(NSA320_GPIO_POWER_OFF, 1);
+}
+
+static int __initdata usb_power = 1; /* default "on" */
+
+static int __init nsa320_usb_power(char *str)
+{
+	usb_power = strncmp(str, "off", 3) ? 1 : 0;
+	return 1;
+}
+/* Parse boot_command_line string nsa320_usb_power=on|off */
+__setup("nsa320_usb_power=", nsa320_usb_power);
+
+static void __init nsa320_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	kirkwood_mpp_conf(nsa320_mpp_config);
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(nsa320_nand_parts), 40);
+	kirkwood_ge00_init(&nsa320_ge00_data);
+	kirkwood_sata_init(&nsa320_sata_data);
+
+	platform_device_register(&nsa320_leds);
+	platform_device_register(&nsa320_buttons);
+	platform_device_register(&nsa320_hwmon);
+
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, &nsa320_i2c_rtc, 1);
+
+       if (gpio_request(NSA320_GPIO_USB_POWER, "USB Power Enable") ||
+           gpio_direction_output(NSA320_GPIO_USB_POWER, usb_power))
+               pr_err("nsa320: failed to configure USB power enable GPIO)\n");
+       gpio_free(NSA320_GPIO_USB_POWER);
+
+	kirkwood_ehci_init();
+
+	if (gpio_request(NSA320_GPIO_POWER_OFF, "power-off") ||
+	    gpio_direction_output(NSA320_GPIO_POWER_OFF, 0))
+		pr_err("nsa320: failed to configure power-off GPIO\n");
+	else
+		pm_power_off = nsa320_power_off;
+}
+
+MACHINE_START(NSA320, "ZyXEL NSA320 2-Bay Power Media Server")
+	/* Maintainer: Peter Schildmann <linux@schildmann.info> */
+	.atag_offset	= 0x100,
+	.init_machine	= nsa320_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time      = kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/pogo_e02-setup.c b/arch/arm/mach-kirkwood/pogo_e02-setup.c
--- a/arch/arm/mach-kirkwood/pogo_e02-setup.c	1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/pogo_e02-setup.c	2013-09-06 04:59:48.965136025 -0600
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-kirkwood/pogo_e02-setup.c
+ *
+ * CloudEngines Pogoplug E02 support
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition pogo_e02_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "pogoplug",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_32M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data pogo_e02_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct gpio_led pogo_e02_led_pins[] = {
+	{
+		.name			= "status:green:health",
+		.default_trigger	= "default-on",
+		.gpio			= 48,
+		.active_low		= 1,
+	},
+	{
+		.name			= "status:orange:fault",
+		.default_trigger	= "none",
+		.gpio			= 49,
+		.active_low		= 1,
+	}
+};
+
+static struct gpio_led_platform_data pogo_e02_led_data = {
+	.leds		= pogo_e02_led_pins,
+	.num_leds	= ARRAY_SIZE(pogo_e02_led_pins),
+};
+
+static struct platform_device pogo_e02_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pogo_e02_led_data,
+	}
+};
+
+static unsigned int pogo_e02_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP48_GPIO,	/* LED Green */
+	MPP49_GPIO,	/* LED Orange */
+	0
+};
+
+static void __init pogo_e02_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	/* setup gpio pin select */
+	kirkwood_mpp_conf(pogo_e02_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(pogo_e02_nand_parts), 25);
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&pogo_e02_ge00_data);
+
+	platform_device_register(&pogo_e02_leds);
+}
+
+MACHINE_START(POGO_E02, "Pogoplug E02")
+	.atag_offset	= 0x100,
+	.init_machine	= pogo_e02_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time      = kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/pogoplugv4-setup.c b/arch/arm/mach-kirkwood/pogoplugv4-setup.c
--- a/arch/arm/mach-kirkwood/pogoplugv4-setup.c	1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/pogoplugv4-setup.c	2013-09-06 04:59:48.975138092 -0600
@@ -0,0 +1,195 @@
+/*
+ * arch/arm/mach-kirkwood/pogoplugv4-setup.c
+ *
+ * Pogoplug Series 4 Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include <plat/orion-gpio.h>
+#include "common.h"
+#include "mpp.h"
+
+#define POGOPLUGV4_GPIO_USB_VBUS		10
+
+static struct mtd_partition ppv4_nand_parts[] = {
+	{
+		.name	= "u-boot",
+		.offset	= 0,
+		.size	= 2 * SZ_1M
+	}, {
+		.name	= "uImage",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 3 * SZ_1M
+	}, {
+		.name	= "uImage2",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 3 * SZ_1M
+	}, {
+		.name	= "failsafe",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_8M
+	}, {
+		.name	= "root",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data pogoplugv4_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data pogoplugv4_sata_data = {
+	.n_ports	= 1,
+};
+
+static struct gpio_keys_button pogoplugv4_button_pins[] = {
+	{
+		.code		= KEY_EJECTCD,
+		.gpio		= 29,
+		.desc		= "Eject Button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data pogoplugv4_button_data = {
+	.buttons	= pogoplugv4_button_pins,
+	.nbuttons	= ARRAY_SIZE(pogoplugv4_button_pins),
+};
+
+static struct platform_device pogoplugv4_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,   
+	.num_resources  = 0,
+	.dev		= {
+		.platform_data  = &pogoplugv4_button_data,
+	},
+};
+
+static struct gpio_led pogoplugv4_led_pins[] = {
+	{
+		.name			= "status:green:health",
+		.default_trigger	= "default-on",
+		.gpio			= 22,
+		.active_low		= 1,
+	},
+	{
+		.name			= "status:red:fault",
+		.default_trigger	= "none",
+		.gpio			= 24,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data pogoplugv4_led_data = {
+	.leds		= pogoplugv4_led_pins,
+	.num_leds	= ARRAY_SIZE(pogoplugv4_led_pins),
+};
+
+static struct platform_device pogoplugv4_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pogoplugv4_led_data,
+	}
+};
+
+static struct mvsdio_platform_data ppv4_mvsdio_data = {
+	.gpio_card_detect = 27,
+};
+
+static unsigned int ppv4_mpp_config[] __initdata = {
+	MPP27_GPIO,	/* SD card detect */
+	MPP29_GPIO,	/* Eject button */
+	MPP22_GPIO,	/* Green LED */
+	MPP24_GPIO,	/* Red LED */
+	MPP12_SD_CLK,
+	MPP13_SD_CMD,
+	MPP14_SD_D0,
+	MPP15_SD_D1,
+	MPP16_SD_D2,
+	MPP17_SD_D3,
+	0
+};
+
+static const struct flash_platform_data pogoplugv4_spi_slave_data = {
+	.type		= "m25p05-nonjedec",
+};
+
+static struct spi_board_info __initdata pogoplugv4_spi_slave_info[] = {
+	{
+		.modalias	= "m25p05-nonjedec",
+		.platform_data	= &pogoplugv4_spi_slave_data,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+static void __init pogoplugv4_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(ppv4_mpp_config);
+
+	orion_gpio_set_valid(POGOPLUGV4_GPIO_USB_VBUS, 1);
+	if (gpio_request(POGOPLUGV4_GPIO_USB_VBUS, "USB VBUS") != 0 ||
+	    gpio_direction_output(POGOPLUGV4_GPIO_USB_VBUS, 1) != 0)
+		pr_err("POGOPLUGV4: failed to setup USB VBUS GPIO\n");
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&pogoplugv4_ge00_data);
+	kirkwood_sata_init(&pogoplugv4_sata_data);
+	spi_register_board_info(pogoplugv4_spi_slave_info,
+				ARRAY_SIZE(pogoplugv4_spi_slave_info));
+	kirkwood_spi_init();
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(ppv4_nand_parts), 25);
+	kirkwood_sdio_init(&ppv4_mvsdio_data);
+	platform_device_register(&pogoplugv4_leds);
+	platform_device_register(&pogoplugv4_buttons);
+}
+
+static int __init pogoplugv4_pci_init(void)
+{
+	if (machine_is_pogoplugv4())
+		kirkwood_pcie_init(KW_PCIE0);
+
+	return 0;
+}
+subsys_initcall(pogoplugv4_pci_init);
+
+MACHINE_START(POGOPLUGV4, "Pogoplug V4")
+	/* Maintainer: Kevin Mihelich <kevin@archlinuxarm.org> */
+	.atag_offset	= 0x100,
+	.init_machine	= pogoplugv4_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time      = kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c	2013-08-29 10:47:51.000000000 -0600
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c	2013-09-06 04:59:48.975138092 -0600
@@ -43,7 +43,7 @@
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
-static struct mv_sata_platform_data sheeva_esata_sata_data = {
+static struct mv_sata_platform_data esata_sheevaplug_sata_data = {
 	.n_ports	= 2,
 };
 
@@ -51,8 +51,8 @@
 	/* unfortunately the CD signal has not been connected */
 };
 
-static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
-	.gpio_write_protect = 44, /* MPP44 used as SD write protect */
+static struct mvsdio_platform_data esata_sheevaplug_mvsdio_data = {
+	.gpio_write_protect = -1, /* (disable - does not work on 3.9+) MPP44 used as SD write protect */
 	.gpio_card_detect = 47,	  /* MPP47 used as SD card detect */
 };
 
@@ -64,7 +64,13 @@
 		.active_low		= 1,
 	},
 	{
-		.name			= "plug:green:health",
+		.name           	= "status:green:health",
+		.default_trigger    	= "none",
+		.gpio           	= 48,
+		.active_low     	= 1,
+	},
+	{
+		.name           	= "status:blue:health",
 		.default_trigger	= "default-on",
 		.gpio			= 49,
 		.active_low		= 1,
@@ -87,15 +93,18 @@
 static unsigned int sheevaplug_mpp_config[] __initdata = {
 	MPP29_GPIO,	/* USB Power Enable */
 	MPP46_GPIO,	/* LED Red */
-	MPP49_GPIO,	/* LED */
+	MPP48_GPIO,	/* LED Green */
+	MPP49_GPIO,	/* LED Blue */
 	0
 };
 
-static unsigned int sheeva_esata_mpp_config[] __initdata = {
+static unsigned int esata_sheevaplug_mpp_config[] __initdata = {
 	MPP29_GPIO,	/* USB Power Enable */
-	MPP44_GPIO,	/* SD Write Protect */
+	//MPP44_GPIO,	/* SD Write Protect */
 	MPP47_GPIO,	/* SD Card Detect */
-	MPP49_GPIO,	/* LED Green */
+	MPP46_GPIO,	/* LED Red */
+	MPP48_GPIO,	/* LED Green */
+	MPP49_GPIO,	/* LED Blue */
 	0
 };
 
@@ -108,7 +117,7 @@
 
 	/* setup gpio pin select */
 	if (machine_is_esata_sheevaplug())
-		kirkwood_mpp_conf(sheeva_esata_mpp_config);
+		kirkwood_mpp_conf(esata_sheevaplug_mpp_config);
 	else
 		kirkwood_mpp_conf(sheevaplug_mpp_config);
 
@@ -124,11 +133,11 @@
 
 	/* honor lower power consumption for plugs with out eSATA */
 	if (machine_is_esata_sheevaplug())
-		kirkwood_sata_init(&sheeva_esata_sata_data);
+		kirkwood_sata_init(&esata_sheevaplug_sata_data);
 
 	/* enable sd wp and sd cd on plugs with esata */
 	if (machine_is_esata_sheevaplug())
-		kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
+		kirkwood_sdio_init(&esata_sheevaplug_mvsdio_data);
 	else
 		kirkwood_sdio_init(&sheevaplug_mvsdio_data);
 
diff -ruN a/arch/arm/mach-kirkwood/topkick-setup.c b/arch/arm/mach-kirkwood/topkick-setup.c
--- a/arch/arm/mach-kirkwood/topkick-setup.c	1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/topkick-setup.c	2013-09-06 04:59:48.975138092 -0600
@@ -0,0 +1,165 @@
+/*
+ * arch/arm/mach-kirkwood/topkick-setup.c
+ *
+ * USI Topkick Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition topkick_nand_parts[] = {
+	{
+		.name	= "u-boot",
+		.offset	= 0,
+		.size	= 0x180000
+	}, {
+		.name	= "u-boot-env",
+		.offset	= 0x180000,
+		.size	= 128 * 1024
+	}, {
+		.name	= "uImage",
+		.offset	= 2 * 1024 * 1024,
+		.size	= 6 * 1024 * 1024
+	}, {
+		.name	= "rootfs",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data topkick_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data topkick_sata_data = {
+	.n_ports	= 1,
+};
+
+static struct mvsdio_platform_data topkick_mvsdio_data = {
+	.gpio_card_detect = 47, /* MPP47 used as SD card detect */
+};
+
+
+static struct gpio_led topkick_led_pins[] = {
+	{
+		.name			= "status:blue:disk",
+		.default_trigger	= "none",
+		.gpio			= 21,
+		.active_low		= 1,
+	},
+	{
+		.name			= "status:red:fault",
+		.default_trigger	= "none",
+		.gpio			= 37,
+		.active_low		= 1,
+	},
+	{
+		.name			= "status:blue:health",
+		.default_trigger	= "default-on",
+		.gpio			= 38,
+		.active_low		= 1,
+	},
+	{
+		.name			= "status:green:misc",
+		.default_trigger	= "none",
+		.gpio			= 39,
+		.active_low		= 1,
+	},
+	{
+		.name			= "status:orange:misc",
+		.default_trigger	= "none",
+		.gpio			= 48,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data topkick_led_data = {
+	.leds		= topkick_led_pins,
+	.num_leds	= ARRAY_SIZE(topkick_led_pins),
+};
+
+static struct platform_device topkick_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &topkick_led_data,
+	}
+};
+
+static unsigned int topkick_mpp_config[] __initdata = {
+	MPP12_SD_CLK,	/* SDIO Clock */
+	MPP13_SD_CMD,	/* SDIO Cmd */
+	MPP14_SD_D0,	/* SDIO Data 0 */
+	MPP15_SD_D1,	/* SDIO Data 1 */
+	MPP16_SD_D2,	/* SDIO Data 2 */
+	MPP17_SD_D3,	/* SDIO Data 3 */
+	MPP21_GPIO,	/* LED Blue SATA */
+	MPP35_GPIO,	/* USB Power Enable */
+	MPP36_GPIO,	/* SATA Power Enable */
+	MPP37_GPIO,	/* LED Red  System */
+	MPP38_GPIO,	/* LED Blue System */
+	MPP39_GPIO,	/* LED Green Misc/WiFi */
+	MPP43_GPIO,	/* WOL Eth WOL */
+	MPP44_GPIO,	/* SW GW Mode */
+	MPP45_GPIO,	/* SW AP Mode */
+	MPP46_GPIO,	/* SW Power Off */
+	MPP47_GPIO,	/* SDIO Detect */
+	MPP48_GPIO,	/* LED Orange Misc/WiFi */
+	0
+};
+
+static void __init topkick_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	/* setup gpio pin select */
+	kirkwood_mpp_conf(topkick_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(topkick_nand_parts), 40);
+
+	if (gpio_request(35, "USB Power Enable") != 0 ||
+	    gpio_direction_output(35, 1) != 0)
+		printk(KERN_ERR "can't set up GPIO 35 (USB Power Enable)\n");
+	if (gpio_request(36, "SATA Power Enable") != 0 ||
+	    gpio_direction_output(36, 1) != 0)
+		printk(KERN_ERR "can't set up GPIO 36 (SATA Power Enable)\n");
+	kirkwood_ge00_init(&topkick_ge00_data);
+	kirkwood_ehci_init();
+	kirkwood_sata_init(&topkick_sata_data);
+	kirkwood_sdio_init(&topkick_mvsdio_data);
+
+	platform_device_register(&topkick_leds);
+}
+
+MACHINE_START(TOPKICK, "USI Topkick")
+	/* Maintainer: Mike Brown <mbrown@archlinuxarm.org> */
+	.atag_offset	= 0x100,
+	.init_machine	= topkick_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.init_time      = kirkwood_timer_init,
+	.restart	= kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
--- a/arch/arm/plat-orion/common.c	2013-08-29 10:47:51.000000000 -0600
+++ b/arch/arm/plat-orion/common.c	2013-09-06 04:59:48.995141858 -0600
@@ -256,7 +256,9 @@
 /*****************************************************************************
  * GE00
  ****************************************************************************/
-struct mv643xx_eth_shared_platform_data orion_ge00_shared_data;
+struct mv643xx_eth_shared_platform_data orion_ge00_shared_data = {
+	.tx_csum_limit	= 1600,
+};
 
 static struct resource orion_ge00_shared_resources[] = {
 	{
diff -ruN a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
--- a/drivers/ata/sata_mv.c	2013-08-29 10:47:51.000000000 -0600
+++ b/drivers/ata/sata_mv.c	2013-09-06 04:59:49.025146634 -0600
@@ -71,6 +71,7 @@
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
 #include <linux/libata.h>
+#include <linux/leds.h>
 
 #define DRV_NAME	"sata_mv"
 #define DRV_VERSION	"1.28"
@@ -1156,6 +1157,8 @@
 {
 	int want_ncq = (protocol == ATA_PROT_NCQ);
 
+	ledtrig_ide_activity();
+
 	if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
 		int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0);
 		if (want_ncq != using_ncq)
diff -ruN a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
--- a/drivers/hwmon/Kconfig	2013-08-29 10:47:51.000000000 -0600
+++ b/drivers/hwmon/Kconfig	2013-09-06 04:59:49.045149344 -0600
@@ -1528,6 +1528,19 @@
         help
           Support for the A/D converter on MC13783 and MC13892 PMIC.
 
+config SENSORS_NSA3XX
+	tristate "ZyXEL NSA3xx fan speed and temperature sensors"
+	depends on (MACH_NSA310 || MACH_NSA320) && GENERIC_GPIO
+	help
+	  If you say yes here you get support for hardware monitoring
+	  for the ZyXEL NSA3XX Media Servers.
+
+	  The sensor data is taken from a Holtek HT46R065 microcontroller
+	  connected to GPIO lines.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nsa3xx-hwmon.
+
 if ACPI
 
 comment "ACPI drivers"
diff -ruN a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
--- a/drivers/hwmon/Makefile	2013-08-29 10:47:51.000000000 -0600
+++ b/drivers/hwmon/Makefile	2013-09-06 04:59:49.075154509 -0600
@@ -107,6 +107,7 @@
 obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o
 obj-$(CONFIG_SENSORS_MAX6697)	+= max6697.o
 obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
+obj-$(CONFIG_SENSORS_NSA3XX)	+= nsa3xx-hwmon.o
 obj-$(CONFIG_SENSORS_MCP3021)	+= mcp3021.o
 obj-$(CONFIG_SENSORS_NCT6775)	+= nct6775.o
 obj-$(CONFIG_SENSORS_NTC_THERMISTOR)	+= ntc_thermistor.o
diff -ruN a/drivers/hwmon/nsa3xx-hwmon.c b/drivers/hwmon/nsa3xx-hwmon.c
--- a/drivers/hwmon/nsa3xx-hwmon.c	1969-12-31 17:00:00.000000000 -0700
+++ b/drivers/hwmon/nsa3xx-hwmon.c	2013-09-06 04:59:49.075154509 -0600
@@ -0,0 +1,251 @@
+/*
+ * drivers/hwmon/nsa3xx-hwmon.c
+ *
+ * ZyXEL NSA3xx Media Servers
+ * hardware monitoring
+ *
+ * Copyright (C) 2012 Peter Schildmann <linux@schildmann.info>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/nsa3xx-hwmon.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <asm/delay.h>
+
+#define MAGIC_NUMBER 0x55
+
+struct nsa3xx_hwmon {
+	struct platform_device	*pdev;
+	struct device		*classdev;
+	struct mutex		update_lock;	/* lock GPIO operations */
+	unsigned long		last_updated;	/* jiffies */
+	unsigned long		mcu_data;
+};
+
+enum nsa3xx_inputs {
+	NSA3XX_FAN = 1,
+	NSA3XX_TEMP = 0,
+};
+
+static const char *nsa3xx_input_names[] = {
+	[NSA3XX_FAN] = "Chassis Fan",
+	[NSA3XX_TEMP] = "System Temperature",
+};
+
+static unsigned long nsa3xx_hwmon_update(struct device *dev)
+{
+	int i;
+	unsigned long mcu_data;
+	struct nsa3xx_hwmon *hwmon = dev_get_drvdata(dev);
+	struct nsa3xx_hwmon_platform_data *pdata = hwmon->pdev->dev.platform_data;
+
+	mutex_lock(&hwmon->update_lock);
+
+	mcu_data = hwmon->mcu_data;
+
+	if (time_after(jiffies, hwmon->last_updated + (3 * HZ)) || mcu_data == 0) {
+		dev_dbg(dev, "Reading MCU data\n");
+
+		gpio_set_value(pdata->act_pin, 0);
+		msleep(100);
+
+		for (i = 31; i >= 0; i--) {
+			gpio_set_value(pdata->clk_pin, 0);
+			udelay(100);
+
+			gpio_set_value(pdata->clk_pin, 1);
+			udelay(100);
+
+			mcu_data |= gpio_get_value(pdata->data_pin) ? (1 << i) : 0;
+		}
+
+		gpio_set_value(pdata->act_pin, 1);
+
+		if ((mcu_data & 0xff000000) != (MAGIC_NUMBER << 24)) {
+			dev_err(dev, "Failed to read MCU data\n");
+			mcu_data = 0;
+		}
+
+		hwmon->mcu_data = mcu_data;
+		hwmon->last_updated = jiffies;
+	}
+
+	mutex_unlock(&hwmon->update_lock);
+
+	return mcu_data;
+}
+
+static ssize_t show_name(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "nsa3xx\n");
+}
+
+static ssize_t show_label(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	int channel = to_sensor_dev_attr(attr)->index;
+	return sprintf(buf, "%s\n", nsa3xx_input_names[channel]);
+}
+
+static ssize_t show_value(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	int channel = to_sensor_dev_attr(attr)->index;
+	unsigned long mcu_data = nsa3xx_hwmon_update(dev);
+	unsigned long value = 0;
+	switch(channel) {
+	case NSA3XX_TEMP:
+		value = (mcu_data & 0xffff) * 100;
+		break;
+	case NSA3XX_FAN:
+		value = ((mcu_data & 0xff0000) >> 16) * 100;
+		break;
+	}
+	return sprintf(buf, "%lu\n", value);
+}
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL, NSA3XX_TEMP);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_value, NULL, NSA3XX_TEMP);
+static SENSOR_DEVICE_ATTR(fan1_label, S_IRUGO, show_label, NULL, NSA3XX_FAN);
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_value, NULL, NSA3XX_FAN);
+
+static struct attribute *nsa3xx_attributes[] = {
+	&dev_attr_name.attr,
+	&sensor_dev_attr_temp1_label.dev_attr.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_label.dev_attr.attr,
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group nsa3xx_attr_group = {
+	.attrs	= nsa3xx_attributes,
+};
+
+static int nsa3xx_hwmon_request_gpios(struct nsa3xx_hwmon_platform_data *pdata)
+{
+	int ret;
+
+	if ((ret = gpio_request(pdata->act_pin, "act pin")))
+		return ret;
+
+	if ((ret = gpio_request(pdata->clk_pin, "clk pin")))
+		return ret;
+
+	if ((ret = gpio_request(pdata->data_pin, "data pin")))
+		return ret;
+
+	if ((ret = gpio_direction_output(pdata->act_pin, 1)))
+		return ret;
+
+	if ((ret = gpio_direction_output(pdata->clk_pin, 1)))
+		return ret;
+
+	if ((ret = gpio_direction_input(pdata->data_pin)))
+		return ret;
+
+	return 0;
+}
+
+static void nsa3xx_hwmon_free_gpios(struct nsa3xx_hwmon_platform_data *pdata)
+{
+	gpio_free(pdata->act_pin);
+	gpio_free(pdata->clk_pin);
+	gpio_free(pdata->data_pin);
+}
+
+static int nsa3xx_hwmon_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct nsa3xx_hwmon *hwmon;
+	struct nsa3xx_hwmon_platform_data *pdata = pdev->dev.platform_data;
+
+	hwmon = kzalloc(sizeof(struct nsa3xx_hwmon), GFP_KERNEL);
+	if (!hwmon)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, hwmon);
+	hwmon->pdev = pdev;
+	hwmon->mcu_data = 0;
+	mutex_init(&hwmon->update_lock);
+
+	ret = sysfs_create_group(&pdev->dev.kobj, &nsa3xx_attr_group);
+	if (ret)
+		goto err;
+
+	hwmon->classdev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(hwmon->classdev)) {
+		ret = PTR_ERR(hwmon->classdev);
+		goto err_sysfs;
+	}
+
+	ret = nsa3xx_hwmon_request_gpios(pdata);
+	if (ret)
+		goto err_free_gpio;
+
+	dev_info(&pdev->dev, "initialized\n");
+
+	return 0;
+
+err_free_gpio:
+	nsa3xx_hwmon_free_gpios(pdata);
+	hwmon_device_unregister(hwmon->classdev);
+err_sysfs:
+	sysfs_remove_group(&pdev->dev.kobj, &nsa3xx_attr_group);
+err:
+	platform_set_drvdata(pdev, NULL);
+	kfree(hwmon);
+	return ret;
+}
+
+static int nsa3xx_hwmon_remove(struct platform_device *pdev)
+{
+	struct nsa3xx_hwmon *hwmon = platform_get_drvdata(pdev);
+
+	nsa3xx_hwmon_free_gpios(pdev->dev.platform_data);
+	hwmon_device_unregister(hwmon->classdev);
+	sysfs_remove_group(&pdev->dev.kobj, &nsa3xx_attr_group);
+	platform_set_drvdata(pdev, NULL);
+	kfree(hwmon);
+
+	return 0;
+}
+
+static struct platform_driver nsa3xx_hwmon_driver = {
+	.probe = nsa3xx_hwmon_probe,
+	.remove = nsa3xx_hwmon_remove,
+	.driver = {
+		.name = "nsa3xx-hwmon",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(nsa3xx_hwmon_driver);
+
+MODULE_AUTHOR("Peter Schildmann <linux@schildmann.info>");
+MODULE_DESCRIPTION("NSA3XX Hardware Monitoring");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:nsa3xx-hwmon");
diff -ruN a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
--- a/drivers/leds/trigger/Kconfig	2013-08-29 10:47:51.000000000 -0600
+++ b/drivers/leds/trigger/Kconfig	2013-09-06 04:59:49.105159319 -0600
@@ -35,7 +35,6 @@
 
 config LEDS_TRIGGER_IDE_DISK
 	bool "LED IDE Disk Trigger"
-	depends on IDE_GD_ATA
 	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be controlled by IDE disk activity.
diff -ruN a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
--- a/drivers/mmc/core/core.c	2013-08-29 10:47:51.000000000 -0600
+++ b/drivers/mmc/core/core.c	2013-09-06 04:59:49.115160531 -0600
@@ -785,7 +785,7 @@
 			 */
 			limit_us = 3000000;
 		else
-			limit_us = 100000;
+			limit_us = 200000;
 
 		/*
 		 * SDHC cards always use these fixed values.
diff -ruN a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
--- a/drivers/mmc/core/sd.c	2013-08-29 10:47:51.000000000 -0600
+++ b/drivers/mmc/core/sd.c	2013-09-06 04:59:49.125161658 -0600
@@ -355,6 +355,15 @@
 		return -ENOMEM;
 	}
 
+	/*
+	 * Some SDHC cards, notably those with a Sandisk SD controller
+	 * (also found in Kingston products) need a bit of slack
+	 * before successfully handling the SWITCH command.  So far,
+	 * cards identifying themselves as "SD04G" and "SD08G" are
+	 * affected
+	 */
+	udelay(100);
+
 	err = mmc_sd_switch(card, 1, 0, 1, status);
 	if (err)
 		goto out;
diff -ruN a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
--- a/drivers/mmc/host/mvsdio.c	2013-08-29 10:47:51.000000000 -0600
+++ b/drivers/mmc/host/mvsdio.c	2013-09-06 04:59:49.145163157 -0600
@@ -25,6 +25,7 @@
 #include <linux/of_irq.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/slot-gpio.h>
+#include <linux/mmc/sd.h>
 #include <linux/pinctrl/consumer.h>
 
 #include <asm/sizes.h>
@@ -148,6 +149,7 @@
 
 	dev_dbg(host->dev, "cmd %d (hw state 0x%04x)\n",
 		cmd->opcode, mvsd_read(MVSD_HW_STATE));
+	if (cmd->opcode == SD_SWITCH) mdelay(1); /* Voodoo */
 
 	cmdreg = MVSD_CMD_INDEX(cmd->opcode);
 
diff -ruN a/include/linux/bubba3.h b/include/linux/bubba3.h
--- a/include/linux/bubba3.h	1969-12-31 17:00:00.000000000 -0700
+++ b/include/linux/bubba3.h	2013-09-06 04:59:49.155164153 -0600
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2010
+ * Excito elektronik i Skåne AB <www.excito.com>
+ * by: Tor Krill <tor@excito.com>
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __BUBBA3_H
+#define __BUBBA3_H
+
+/*
+ * GPIO definitions
+ */
+#define B3_LED_INTERVAL		(37)
+#define B3_FRONT_LED_GREEN	(38)
+#define B3_POWER_BUTTON		(39)
+#define B3_BUZZER_ENABLE	(40)
+#define B3_FRONT_LED_RED	(41)
+#define B3_FRONT_LED_BLUE	(42)
+#define B3_HW_ID0		(43)
+#define B3_HW_ID1		(44)
+#define B3_HW_ID2		(45)
+#define B3_BUZ_4KHZ		(46)
+
+#endif
diff -ruN a/include/linux/nsa3xx-hwmon.h b/include/linux/nsa3xx-hwmon.h
--- a/include/linux/nsa3xx-hwmon.h	1969-12-31 17:00:00.000000000 -0700
+++ b/include/linux/nsa3xx-hwmon.h	2013-09-06 04:59:49.155164153 -0600
@@ -0,0 +1,21 @@
+/*
+ * include/linux/nsa3xx.hwmon.h
+ *
+ * Platform data structure for ZyXEL NSA3xx hwmon driver
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __LINUX_NSA3XX_HWMON_H
+#define __LINUX_NSA3XX_HWMON_H
+
+struct nsa3xx_hwmon_platform_data {
+	/* GPIO pins */
+	unsigned act_pin;
+	unsigned clk_pin;
+	unsigned data_pin;
+};
+
+#endif /* __LINUX_NSA3XX_HWMON_H */