PKGBUILDs/alarm/uboot-pandaboard/0001-arch-linux-arm-modifications.patch

From cbc2e3d0a3cfb4982061a1b2a02483b3c189ffb2 Mon Sep 17 00:00:00 2001
From: Kevin Mihelich <kevin@archlinuxarm.org>
Date: Sat, 22 Nov 2014 22:55:40 -0700
Subject: [PATCH] arch linux arm modifications

Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
---
 include/configs/ti_omap4_common.h | 36 +++++++++++++++++++++++++-----------
 1 file changed, 25 insertions(+), 11 deletions(-)

diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index b0f199e..21343a8 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -46,7 +46,6 @@
  * the timings to use or use pre-determined timings (based on using the
  * dynamic method.  Default to the static timing infomation.
  */
-#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
 #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
 #define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
 #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
@@ -82,6 +81,10 @@
 #undef CONFIG_CMD_NET
 #undef CONFIG_CMD_NFS
 
+/* Arch Linux ARM extras */
+#define CONFIG_IDENT_STRING " Arch Linux ARM"
+#define CONFIG_SUPPORT_RAW_INITRD
+
 /*
  * Environment setup
  */
@@ -89,29 +92,35 @@
 	DEFAULT_LINUX_BOOT_ENV \
 	"console=ttyO2,115200n8\0" \
 	"fdtfile=undefined\0" \
-	"bootpart=0:2\0" \
+	"bootpart=0:1\0" \
 	"bootdir=/boot\0" \
+	"fdtdir=/boot/dtbs\0" \
 	"bootfile=zImage\0" \
+	"rdfile=initramfs-linux.img\0" \
 	"usbtty=cdc_acm\0" \
 	"vram=16M\0" \
 	"mmcdev=0\0" \
-	"mmcroot=/dev/mmcblk0p2 rw\0" \
-	"mmcrootfstype=ext3 rootwait\0" \
+	"optargs=\0" \
+	"mmcroot=/dev/mmcblk0p1 rw rootwait\0" \
 	"mmcargs=setenv bootargs console=${console} " \
 		"vram=${vram} " \
 		"root=${mmcroot} " \
-		"rootfstype=${mmcrootfstype}\0" \
-	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+		"${optargs}\0" \
+	"loadbootscript=load mmc ${bootpart} ${loadaddr} ${bootdir}/boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
 		"source ${loadaddr}\0" \
-	"loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
+	"loadbootenv=load mmc ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt\0" \
 	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
 		"env import -t ${loadaddr} ${filesize}\0" \
 	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-	"loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \
+	"loaduimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/uImage\0" \
+	"loadrd=load mmc ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
 	"mmcboot=echo Booting from mmc${mmcdev} ...; " \
 		"run mmcargs; " \
 		"bootz ${loadaddr} - ${fdtaddr}\0" \
+	"rdboot=echo Booting from mmc${mmcdev} ...; " \
+		"run mmcargs; " \
+		"bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
 	"uimageboot=echo Booting from mmc${mmcdev} ...; " \
 		"run mmcargs; " \
 		"bootm ${loadaddr}\0" \
@@ -128,7 +137,7 @@
 			"setenv fdtfile omap4-duovero-parlor.dtb; fi;" \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine device tree to use; fi; \0" \
-	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
 
 #define CONFIG_BOOTCOMMAND \
 	"run findfdt; " \
@@ -146,8 +155,13 @@
 			"fi;" \
 		"fi;" \
 		"if run loadimage; then " \
-			"run loadfdt;" \
-			"run mmcboot; " \
+			"if run loadfdt; then " \
+				"if run loadrd; then " \
+					"run rdboot; "\
+				"else " \
+					"run mmcboot; " \
+				"fi;" \
+			"fi;" \
 		"fi; " \
 		"if run loaduimage; then " \
 			"run uimageboot;" \
-- 
2.1.3