PKGBUILDs/alarm/uboot-odroid-n2/boot.ini

122 lines
4.7 KiB
INI
Raw Normal View History

2019-04-06 01:52:32 +00:00
ODROIDN2-UBOOT-CONFIG
# Default Console Device Setting
setenv condev "console=ttyS0,115200n8" # on both
# Auto Detection of Monitor settings based on your Screen information
setenv display_autodetect "true"
# HDMI Mode
# Resolution Configuration
# Symbol | Resolution
# ----------------------+-------------
2019-06-22 19:39:21 +00:00
# "480x272p60hz" | 480x272 Progressive 60Hz
2019-04-06 01:52:32 +00:00
# "480x320p60hz" | 480x320 Progressive 60Hz
# "480p60hz" | 720x480 Progressive 60Hz
# "576p50hz" | 720x576 Progressive 50Hz
# "720p60hz" | 1280x720 Progressive 60Hz
# "720p50hz" | 1280x720 Progressive 50Hz
# "1080p60hz" | 1920x1080 Progressive 60Hz
# "1080p50hz" | 1920x1080 Progressive 50Hz
# "1080p30hz" | 1920x1080 Progressive 30Hz
# "1080p24hz" | 1920x1080 Progressive 24Hz
# "1080i60hz" | 1920x1080 Interlaced 60Hz
# "1080i50hz" | 1920x1080 Interlaced 50Hz
# "2160p60hz" | 3840x2160 Progressive 60Hz
# "2160p50hz" | 3840x2160 Progressive 50Hz
# "2160p30hz" | 3840x2160 Progressive 30Hz
# "2160p25hz" | 3840x2160 Progressive 25Hz
# "2160p24hz" | 3840x2160 Progressive 24Hz
# "smpte24hz" | 3840x2160 Progressive 24Hz SMPTE
# "2160p60hz420" | 3840x2160 Progressive 60Hz YCbCr 4:2:0
# "2160p50hz420" | 3840x2160 Progressive 50Hz YCbCr 4:2:0
# "640x480p60hz" | 640x480 Progressive 60Hz
# "800x480p60hz" | 800x480 Progressive 60Hz
# "800x600p60hz" | 800x600 Progressive 60Hz
# "1024x600p60hz" | 1024x600 Progressive 60Hz
# "1024x768p60hz" | 1024x768 Progressive 60Hz
# "1280x800p60hz" | 1280x800 Progressive 60Hz
# "1280x1024p60hz" | 1280x1024 Progressive 60Hz
# "1360x768p60hz" | 1360x768 Progressive 60Hz
# "1440x900p60hz" | 1440x900 Progressive 60Hz
# "1600x900p60hz" | 1600x900 Progressive 60Hz
# "1600x1200p60hz" | 1600x1200 Progressive 60Hz
# "1680x1050p60hz" | 1680x1050 Progressive 60Hz
# "1920x1200p60hz" | 1920x1200 Progressive 60Hz
# "2560x1080p60hz" | 2560x1080 Progressive 60Hz
# "2560x1440p60hz" | 2560x1440 Progressive 60Hz
# "2560x1600p60hz" | 2560x1600 Progressive 60Hz
# "3440x1440p60hz" | 3440x1440 Progressive 60Hz
setenv hdmimode "1080p60hz"
2019-08-08 00:02:02 +00:00
# Monitor output
# Controls if HDMI PHY should output anything to the monitor
setenv monitor_onoff "false" # true or false
2019-04-06 01:52:32 +00:00
# Overscan percentage
# This value scales down the actual screen size by the percentage below
# valid range is 80 to 100
setenv overscan "100"
### voutmode : hdmi or dvi
setenv voutmode "hdmi"
# setenv voutmode "dvi"
# HPD enable/disable option
setenv disablehpd "false"
2019-09-15 00:55:04 +00:00
# Enable/Disable CEC
setenv cec "true"
2019-06-22 19:39:21 +00:00
# Hardkernel ODROID-VU7 support
# By default VU7 support is disabled
setenv disable_vu7 "true"
# setenv disable_vu7 "false"
2019-04-06 01:52:32 +00:00
# max cpu frequency for big core, A73 in MHz unit
# setenv max_freq_a73 "2004" # 2.004 GHz
# setenv max_freq_a73 "1992" # 1.992 GHz
# setenv max_freq_a73 "1908" # 1.908 GHz
setenv max_freq_a73 "1800" # 1.8 GHz, default value
# setenv max_freq_a73 "1704" # 1.704 GHz
# max cpu frequency for little core, A53 in MHz unit
# setenv max_freq_a53 "1992" # 1.992 GHz
setenv max_freq_a53 "1896" # 1.896 GHz, default value
# setenv max_freq_a53 "1704" # 1.704 GHz
# max cpu-cores
# Note:
# CPU's 0 and 1 are the A53 (small cores)
# CPU's 2 to 5 are the A73 (big cores)
# Lowering this value disables only the bigger cores (the last cores).
# setenv maxcpus "4"
# setenv maxcpus "5"
setenv maxcpus "6"
### Normal HDMI Monitors
if test "${display_autodetect}" = "true"; then hdmitx edid; fi
if test "${hdmimode}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi
2019-09-15 00:55:04 +00:00
if test "${cec}" = "true"; then setenv cec_enable "hdmitx=cec3f"; fi
2019-04-06 01:52:32 +00:00
2019-06-22 19:39:21 +00:00
# VU7 Settings
if test "${disable_vu7}" = "false"; then setenv hid_quirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi
2019-04-06 01:52:32 +00:00
# Boot Args
2019-09-15 00:55:04 +00:00
setenv bootargs "root=/dev/mmcblk${devno}p2 rootwait rw ${condev} ${amlogic} no_console_suspend fsck.repair=yes net.ifnames=0 elevator=noop hdmimode=${hdmimode} cvbsmode=576cvbs max_freq_a53=${max_freq_a53} max_freq_a73=${max_freq_a73} maxcpus=${maxcpus} voutmode=${voutmode} ${cmode} disablehpd=${disablehpd} cvbscable=${cvbscable} overscan=${overscan} ${hid_quirks} monitor_onoff=${monitor_onoff} logo=osd0,loaded ${cec_enable}"
2019-04-06 01:52:32 +00:00
# Set load addresses
setenv dtb_loadaddr "0x1000000"
setenv loadaddr "0x1B00000"
setenv initrd_loadaddr "0x3700000"
# Load kernel, dtb and initrd
load mmc ${devno}:1 ${loadaddr} /Image
load mmc ${devno}:1 ${dtb_loadaddr} /dtbs/amlogic/meson64_odroidn2.dtb
load mmc ${devno}:1 ${initrd_loadaddr} /initramfs-linux.uimg
fdt addr ${dtb_loadaddr}
# boot
booti ${loadaddr} ${initrd_loadaddr} ${dtb_loadaddr}