PKGBUILDs/core/binutils/binutils-2.24-strings-all-default.patch

diff -cpr ../binutils-2.24.orig/binutils/config.in binutils/config.in
*** ../binutils-2.24.orig/binutils/config.in	2014-10-31 11:50:20.455222877 +0000
--- binutils/config.in	2014-10-31 11:59:05.021241036 +0000
***************
*** 18,23 ****
--- 18,26 ----
  /* Should ar and ranlib use -D behavior by default? */
  #undef DEFAULT_AR_DETERMINISTIC
  
+ /* Should strings use -a behavior by default? */
+ #undef DEFAULT_STRINGS_ALL
+ 
  /* Define to 1 if translation of program messages to the user's native
     language is requested. */
  #undef ENABLE_NLS
diff -cpr ../binutils-2.24.orig/binutils/configure binutils/configure
*** ../binutils-2.24.orig/binutils/configure	2014-10-31 11:50:20.590223736 +0000
--- binutils/configure	2014-10-31 12:01:46.570102643 +0000
*************** with_gnu_ld
*** 772,777 ****
--- 772,778 ----
  enable_libtool_lock
  enable_targets
  enable_deterministic_archives
+ enable_default_strings_all
  enable_werror
  enable_build_warnings
  enable_nls
*************** Optional Features:
*** 1421,1426 ****
--- 1422,1429 ----
    --enable-targets        alternative target configurations
    --enable-deterministic-archives
                            ar and ranlib default to -D behavior
+   --disable-default-strings-all
+                           strings defaults to --data behavior
    --enable-werror         treat compile warnings as errors
    --enable-build-warnings enable build-time compiler warnings
    --disable-nls           do not use Native Language Support
*************** cat >>confdefs.h <<_ACEOF
*** 11615,11620 ****
--- 11594,11618 ----
  _ACEOF
  
  
+ # Check whether --enable-default-strings-all was given.
+ if test "${enable_default_strings_all+set}" = set; then :
+   enableval=$enable_default_strings_all;
+ if test "${enableval}" = no; then
+   default_strings_all=0
+ else
+   default_strings_all=1
+ fi
+ else
+   default_strings_all=1
+ fi
+ 
+ 
+ 
+ cat >>confdefs.h <<_ACEOF
+ #define DEFAULT_STRINGS_ALL $default_strings_all
+ _ACEOF
+ 
+ 
  
  GCC_WARN_CFLAGS="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
diff -cpr ../binutils-2.24.orig/binutils/configure.in binutils/configure.in
*** ../binutils-2.24.orig/binutils/configure.in	2014-10-31 11:50:20.430222717 +0000
--- binutils/configure.in	2014-10-31 12:00:48.092790946 +0000
*************** fi], [default_ar_deterministic=0])
*** 57,62 ****
--- 57,74 ----
  AC_DEFINE_UNQUOTED(DEFAULT_AR_DETERMINISTIC, $default_ar_deterministic,
  		   [Should ar and ranlib use -D behavior by default?])
  
+ AC_ARG_ENABLE(default-strings-all,
+ [AS_HELP_STRING([--disable-default-strings-all],
+ 		[strings defaults to --data behavior])], [
+ if test "${enableval}" = no; then
+   default_strings_all=0
+ else
+   default_strings_all=1
+ fi], [default_strings_all=1])
+ 
+ AC_DEFINE_UNQUOTED(DEFAULT_STRINGS_ALL, $default_strings_all,
+ 		   [Should strings use -a behavior by default?])
+ 
  AM_BINUTILS_WARNINGS
  
  AC_CONFIG_HEADERS(config.h:config.in)
diff -cpr ../binutils-2.24.orig/binutils/doc/binutils.texi binutils/doc/binutils.texi
*** ../binutils-2.24.orig/binutils/doc/binutils.texi	2014-10-31 11:50:20.579223666 +0000
--- binutils/doc/binutils.texi	2014-10-31 11:59:23.052339164 +0000
*************** strings [@option{-afovV}] [@option{-}@va
*** 2653,2667 ****
  
  @c man begin DESCRIPTION strings
  
! For each @var{file} given, @sc{gnu} @command{strings} prints the printable
! character sequences that are at least 4 characters long (or the number
! given with the options below) and are followed by an unprintable
! character.  By default, it only prints the strings from the initialized
! and loaded sections of object files; for other types of files, it prints
! the strings from the whole file.
  
! @command{strings} is mainly useful for determining the contents of non-text
! files.
  
  @c man end
  
--- 2653,2676 ----
  
  @c man begin DESCRIPTION strings
  
! For each @var{file} given, @sc{gnu} @command{strings} prints the
! printable character sequences that are at least 4 characters long (or
! the number given with the options below) and are followed by an
! unprintable character.
! 
! Depending upon how the strings program was configured it will default
! to either displaying all the printable sequences that it can find in
! each file, or only those sequences that are in loadable, initialized
! data sections.  If the file type in unrecognizable, or if strings is
! reading from stdin then it will always display all of the printable
! sequences that it can find.
! 
! For backwards compatibility any file that occurs after a command line
! option of just @option{-} will also be scanned in full, regardless of
! the presence of any @option{-d} option. 
  
! @command{strings} is mainly useful for determining the contents of
! non-text files.
  
  @c man end
  
*************** files.
*** 2671,2678 ****
  @item -a
  @itemx --all
  @itemx -
! Do not scan only the initialized and loaded sections of object files;
! scan the whole files.
  
  @item -f
  @itemx --print-file-name
--- 2680,2704 ----
  @item -a
  @itemx --all
  @itemx -
! Scan the whole file, regardless of what sections it contains or
! whether those sections are loaded or initialized.  Normally this is
! the default behaviour, but strings can be configured so that the
! @option{-d} is the default instead.
! 
! The @option{-} option is position dependent and forces strings to
! perform full scans of any file that is mentioned after the @option{-}
! on the command line, even if the @option{-d} option has been
! specified.
! 
! @item -d
! @itemx --data
! Only print strings from initialized, loaded data sections in the
! file.  This may reduce the amount of garbage in the output, but it
! also exposes the strings program to any security flaws that may be
! present in the BFD library used to scan and load sections.  Strings
! can be configured so that this option is the default behaviour.  In
! such cases the @option{-a} option can be used to avoid using the BFD
! library and instead just print all of the strings found in the file.
  
  @item -f
  @itemx --print-file-name
diff -cpr ../binutils-2.24.orig/binutils/NEWS binutils/NEWS
*** ../binutils-2.24.orig/binutils/NEWS	2014-10-31 11:50:20.338222131 +0000
--- binutils/NEWS	2014-10-31 11:59:52.315493579 +0000
***************
*** 1,5 ****
--- 1,10 ----
  -*- text -*-
  
+ * Add --data option to strings to only print strings in loadable, initialized
+   data sections.  Change the default behaviour to be --all, but add a new
+   configure time option of --disable-default-strings-all to restore the old
+   default behaviour.
+ 
  Changes in 2.24:
  
  * Objcopy now supports wildcard characters in command line options that take
diff -cpr ../binutils-2.24.orig/binutils/strings.c binutils/strings.c
*** ../binutils-2.24.orig/binutils/strings.c	2014-10-31 11:50:20.464222934 +0000
--- binutils/strings.c	2014-10-31 12:01:33.901035485 +0000
***************
*** 23,29 ****
     Options:
     --all
     -a
!    -		Do not scan only the initialized data section of object files.
  
     --print-file-name
     -f		Print the name of the file before each string.
--- 23,32 ----
     Options:
     --all
     -a
!    -		Scan each file in its entirety.
! 
!    --data
!    -d		Scan only the initialized data section(s) of object files.
  
     --print-file-name
     -f		Print the name of the file before each string.
*************** static int encoding_bytes;
*** 107,112 ****
--- 110,116 ----
  static struct option long_options[] =
  {
    {"all", no_argument, NULL, 'a'},
+   {"data", no_argument, NULL, 'd'},
    {"print-file-name", no_argument, NULL, 'f'},
    {"bytes", required_argument, NULL, 'n'},
    {"radix", required_argument, NULL, 't'},
*************** typedef struct
*** 128,134 ****
  
  static void strings_a_section (bfd *, asection *, void *);
  static bfd_boolean strings_object_file (const char *);
! static bfd_boolean strings_file (char *file);
  static void print_strings (const char *, FILE *, file_ptr, int, int, char *);
  static void usage (FILE *, int);
  static long get_char (FILE *, file_ptr *, int *, char **);
--- 132,138 ----
  
  static void strings_a_section (bfd *, asection *, void *);
  static bfd_boolean strings_object_file (const char *);
! static bfd_boolean strings_file (char *);
  static void print_strings (const char *, FILE *, file_ptr, int, int, char *);
  static void usage (FILE *, int);
  static long get_char (FILE *, file_ptr *, int *, char **);
*************** main (int argc, char **argv)
*** 158,168 ****
    string_min = 4;
    print_addresses = FALSE;
    print_filenames = FALSE;
!   datasection_only = TRUE;
    target = NULL;
    encoding = 's';
  
!   while ((optc = getopt_long (argc, argv, "afhHn:ot:e:T:Vv0123456789",
  			      long_options, (int *) 0)) != EOF)
      {
        switch (optc)
--- 162,175 ----
    string_min = 4;
    print_addresses = FALSE;
    print_filenames = FALSE;
!   if (DEFAULT_STRINGS_ALL)
!     datasection_only = FALSE;
!   else
!     datasection_only = TRUE;
    target = NULL;
    encoding = 's';
  
!   while ((optc = getopt_long (argc, argv, "adfhHn:ot:e:T:Vv0123456789",
  			      long_options, (int *) 0)) != EOF)
      {
        switch (optc)
*************** main (int argc, char **argv)
*** 171,176 ****
--- 178,187 ----
  	  datasection_only = FALSE;
  	  break;
  
+ 	case 'd':
+ 	  datasection_only = TRUE;
+ 	  break;
+ 
  	case 'f':
  	  print_filenames = TRUE;
  	  break;
*************** usage (FILE *stream, int status)
*** 635,642 ****
  {
    fprintf (stream, _("Usage: %s [option(s)] [file(s)]\n"), program_name);
    fprintf (stream, _(" Display printable strings in [file(s)] (stdin by default)\n"));
!   fprintf (stream, _(" The options are:\n\
    -a - --all                Scan the entire file, not just the data section\n\
    -f --print-file-name      Print the name of the file before each string\n\
    -n --bytes=[number]       Locate & print any NUL-terminated sequence of at\n\
    -<number>                   least [number] characters (default 4).\n\
--- 646,663 ----
  {
    fprintf (stream, _("Usage: %s [option(s)] [file(s)]\n"), program_name);
    fprintf (stream, _(" Display printable strings in [file(s)] (stdin by default)\n"));
!   fprintf (stream, _(" The options are:\n"));
! 
!   if (DEFAULT_STRINGS_ALL)
!     fprintf (stream, _("\
!   -a - --all                Scan the entire file, not just the data section [default]\n\
!   -d --data                 Only scan the data sections in the file\n"));
!   else
!     fprintf (stream, _("\
    -a - --all                Scan the entire file, not just the data section\n\
+   -d --data                 Only scan the data sections in the file [default]\n"));
+ 
+   fprintf (stream, _("\
    -f --print-file-name      Print the name of the file before each string\n\
    -n --bytes=[number]       Locate & print any NUL-terminated sequence of at\n\
    -<number>                   least [number] characters (default 4).\n\

Only in binutils: strings.c.rej