PKGBUILDs/core/linux-aarch64-rc/0004-Revert-arm64-dts-qcom-Collapse-usb-support-into-one-.patch

From 0c9149a1813b56d043fa3db8f8591f0b2677ee50 Mon Sep 17 00:00:00 2001
From: Kevin Mihelich <kevin@archlinuxarm.org>
Date: Thu, 17 Aug 2017 21:18:11 -0600
Subject: [PATCH 4/4] Revert "arm64: dts: qcom: Collapse usb support into one
 node"

This reverts commit ed75d6a969056cc8f5dd2df3af6c75b792b9116b.
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 34 ++++++++---------
 arch/arm64/boot/dts/qcom/msm8916.dtsi     | 62 ++++++++++++++++---------------
 2 files changed, 49 insertions(+), 47 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index bd310ac1967a..f326f4fb4d72 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -215,16 +215,22 @@
 		usb@78d9000 {
 			extcon = <&usb_id>, <&usb_id>;
 			status = "okay";
-			adp-disable;
-			hnp-disable;
-			srp-disable;
-			ulpi {
-				phy {
-					v1p8-supply = <&pm8916_l7>;
-					v3p3-supply = <&pm8916_l13>;
-					extcon = <&usb_id>;
-				};
-			};
+		};
+
+		ehci@78d9000 {
+			status = "okay";
+		};
+
+		phy@78d9000 {
+			v1p8-supply = <&pm8916_l7>;
+			v3p3-supply = <&pm8916_l13>;
+			vddcx-supply = <&pm8916_s1>;
+			extcon = <&usb_id>, <&usb_id>;
+			dr_mode = "otg";
+			status = "okay";
+			switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_sw_sel_pm>;
 		};
 
 		lpass@07708000 {
@@ -342,14 +348,6 @@
 		pinctrl-0 = <&usb_id_default>;
 	};
 
-	usb-switch {
-		compatible = "toshiba,tc7usb40mu";
-		switch-gpios = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
-		extcon = <&usb_id>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb_sw_sel_pm>;
-	};
-
 	hdmi-out {
 		compatible = "hdmi-connector";
 		type = "a";
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 039991f80831..17691abea608 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -546,40 +546,44 @@
 			status = "disabled";
 		};
 
-		otg: usb@78d9000 {
+		usb_dev: usb@78d9000 {
 			compatible = "qcom,ci-hdrc";
-			reg = <0x78d9000 0x200>,
-			      <0x78d9200 0x200>;
+			reg = <0x78d9000 0x400>;
+			dr_mode = "peripheral";
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			usb-phy = <&usb_otg>;
+			status = "disabled";
+		};
+
+		usb_host: ehci@78d9000 {
+			compatible = "qcom,ehci-host";
+			reg = <0x78d9000 0x400>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			usb-phy = <&usb_otg>;
+			status = "disabled";
+		};
+
+		usb_otg: phy@78d9000 {
+			compatible = "qcom,usb-otg-snps";
+			reg = <0x78d9000 0x400>;
 			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+
+			qcom,vdd-levels = <500000 1000000 1320000>;
+			qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
+			dr_mode = "peripheral";
+			qcom,otg-control = <2>; // PMIC
+			qcom,manual-pullup;
+
 			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
-				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
-			clock-names = "iface", "core";
-			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
-			assigned-clock-rates = <80000000>;
-			resets = <&gcc GCC_USB_HS_BCR>;
-			reset-names = "core";
-			phy_type = "ulpi";
-			dr_mode = "otg";
-			ahb-burst-config = <0>;
-			phy-names = "usb-phy";
-			phys = <&usb_hs_phy>;
-			status = "disabled";
-			#reset-cells = <1>;
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "iface", "core", "sleep";
 
-			ulpi {
-				usb_hs_phy: phy {
-					compatible = "qcom,usb-hs-phy-msm8916",
-						     "qcom,usb-hs-phy";
-					#phy-cells = <0>;
-					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
-					clock-names = "ref", "sleep";
-					resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
-					reset-names = "phy", "por";
-					qcom,init-seq = /bits/ 8 <0x0 0x44
-						0x1 0x6b 0x2 0x24 0x3 0x13>;
-				};
-			};
+			resets = <&gcc GCC_USB2A_PHY_BCR>,
+				 <&gcc GCC_USB_HS_BCR>;
+			reset-names = "phy", "link";
+			status = "disabled";
 		};
 
 		intc: interrupt-controller@b000000 {
-- 
2.14.1