removed alarm/uboot-olinuxino

alarm/uboot-olinuxino/0001-arch-linux-arm-modifications.patch

@@ -1,168 +0,0 @@
-From ff573490833587ad9b78d56bb17ac596584e7d39 Mon Sep 17 00:00:00 2001
-From: Kevin Mihelich <kevin@archlinuxarm.org>
-Date: Sat, 31 Oct 2015 10:05:29 -0600
-Subject: [PATCH] arch linux arm modifications
-
-Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
----
- include/configs/mx23_olinuxino.h | 131 +++++++++++++++++----------------------
- 1 file changed, 58 insertions(+), 73 deletions(-)
-
-diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h
-index 7747258..7bfbd24 100644
---- a/include/configs/mx23_olinuxino.h
-+++ b/include/configs/mx23_olinuxino.h
-@@ -17,6 +17,16 @@
- 
- #define CONFIG_CMD_LED
- 
-+/* Arch Linux ARM extras */
-+#define CONFIG_IDENT_STRING " Arch Linux ARM"
-+#define CONFIG_CMD_SETEXPR
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
-+#define CONFIG_CMD_EXT4
-+#define CONFIG_CMD_FS_GENERIC
-+#define CONFIG_CMD_BOOTZ
-+#define CONFIG_SUPPORT_RAW_INITRD
-+
- /* Memory configuration */
- #define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
- #define PHYS_SDRAM_1			0x40000000	/* Base address */
-@@ -63,85 +73,60 @@
- 
- /* Extra Environment */
- #define CONFIG_EXTRA_ENV_SETTINGS \
--	"update_sd_firmware_filename=u-boot.sd\0" \
--	"update_sd_firmware="		/* Update the SD firmware partition */ \
--		"if mmc rescan ; then "	\
--		"if tftp ${update_sd_firmware_filename} ; then " \
--		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
--		"setexpr fw_sz ${fw_sz} + 1 ; "	\
--		"mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
--		"fi ; "	\
--		"fi\0" \
--	"script=boot.scr\0"	\
--	"uimage=uImage\0" \
- 	"console=ttyAMA0\0" \
--	"fdt_file=imx23-olinuxino.dtb\0" \
--	"fdt_addr=0x41000000\0" \
--	"boot_fdt=try\0" \
--	"ip_dyn=yes\0" \
--	"mmcdev=0\0" \
--	"mmcpart=2\0" \
--	"mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
-+	"fdtfile=imx23-olinuxino.dtb\0" \
-+	"fdtaddr=0x41000000\0" \
-+	"rdfile=initramfs-linux.img\0" \
-+	"rdaddr=0x42A00000\0" \
-+	"bootdir=/boot\0" \
-+	"fdtdir=/boot/dtbs\0" \
-+	"bootfile=zImage\0" \
-+	"optargs=\0" \
-+	"cmdline=\0" \
- 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
--		"root=${mmcroot}\0" \
--	"loadbootscript="  \
--		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
--	"bootscript=echo Running bootscript from mmc ...; "	\
--		"source\0" \
--	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
--	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
--	"mmcboot=echo Booting from mmc ...; " \
--		"run mmcargs; " \
--		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
--			"if run loadfdt; then " \
--				"bootm ${loadaddr} - ${fdt_addr}; " \
--			"else " \
--				"if test ${boot_fdt} = try; then " \
--					"bootm; " \
--				"else " \
--					"echo WARN: Cannot load the DT; " \
--				"fi; " \
--			"fi; " \
--		"else " \
--			"bootm; " \
--		"fi;\0" \
--	"netargs=setenv bootargs console=${console},${baudrate} " \
--		"root=/dev/nfs " \
--		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
--	"netboot=echo Booting from net ...; " \
--		"usb start; " \
--		"run netargs; "	\
--		"if test ${ip_dyn} = yes; then " \
--			"setenv get_cmd dhcp; " \
--		"else " \
--			"setenv get_cmd tftp; " \
--		"fi; " \
--		"${get_cmd} ${uimage}; " \
--		"if test ${boot_fdt} = yes; then " \
--			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
--				"bootm ${loadaddr} - ${fdt_addr}; " \
--			"else " \
--				"if test ${boot_fdt} = try; then " \
--					"bootm; " \
-+		"${optargs} " \
-+		"root=${root} " \
-+		"${cmdline}\0" \
-+	"loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+	"loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+	"loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+	"mmcboot=usb start;" \
-+		"for devtype in mmc usb; do " \
-+			"setenv devnum 0;" \
-+			"while ${devtype} dev ${devnum}; do " \
-+				"echo ${devtype} found on device ${devnum};" \
-+				"if test ${devtype} = mmc; then setenv bootpart ${devnum}:2; else setenv bootpart ${devnum}:1; fi;" \
-+				"part uuid ${devtype} ${bootpart} uuid;" \
-+				"setenv root PARTUUID=${uuid} rw rootwait fixrtc;" \
-+				"echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+				"if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+					"load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+					"env import -t ${loadaddr} ${filesize};" \
-+					"echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+					"echo Checking if uenvcmd is set ...;" \
-+					"if test -n ${uenvcmd}; then " \
-+						"echo Running uenvcmd ...;" \
-+						"run uenvcmd;" \
-+					"fi;" \
-+				"fi;" \
-+				"if run loadimage; then " \
-+					"run mmcargs;" \
-+					"if run loadfdt; then " \
-+						"if run loadrd; then " \
-+							"bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+						"else " \
-+							"bootz ${loadaddr} - ${fdtaddr};" \
-+						"fi;" \
-+					"fi;" \
- 				"else " \
--					"echo WARN: Cannot load the DT; " \
-+					"echo No kernel found;" \
- 				"fi;" \
--			"fi; " \
--		"else " \
--			"bootm; " \
--		"fi;\0"
-+				"setexpr devnum ${devnum} + 1;" \
-+			"done;" \
-+		"done;\0"
- 
- #define CONFIG_BOOTCOMMAND \
--	"mmc dev ${mmcdev}; if mmc rescan; then " \
--		"if run loadbootscript; then " \
--			"run bootscript; " \
--		"else " \
--			"if run loaduimage; then " \
--				"run mmcboot; " \
--			"else run netboot; " \
--			"fi; " \
--		"fi; " \
--	"else run netboot; fi"
-+	"run mmcboot;"
- 
- /* The rest of the configuration is shared */
- #include <configs/mxs.h>
--- 
-2.9.3
-

alarm/uboot-olinuxino/PKGBUILD

@@ -1,42 +0,0 @@
-# U-Boot for i.MX233-OLinuXino
-# Maintainer: Kevin Mihelich <kevin@archlinuxarm.org>
-# Contributor: Kiril Zyapkov <kiril.zyapkov@gmail.com>
-
-buildarch=2
-
-pkgname=uboot-olinuxino
-pkgdesc="U-Boot for i.MX233-OLinuXino"
-pkgver=2016.07
-pkgrel=1
-arch=('arm')
-license=('GPL')
-makedepends=('git' 'bc')
-install=$pkgname.install
-options=('!strip')
-backup=('boot/uEnv.txt')
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
-        '0001-arch-linux-arm-modifications.patch'
-        'uEnv.txt')
-md5sums=('425a3fa610a7d972e5092a0e92276c70'
-         '8a8fa0c90fc6898ac4de7d8fad52723f'
-         'd41d8cd98f00b204e9800998ecf8427e')
-
-prepare() {
-  cd "$srcdir/u-boot-${pkgver}"
-  git apply ../0001-arch-linux-arm-modifications.patch
-}
-
-build() {
-  cd "$srcdir/u-boot-${pkgver}"
-
-  unset LDFLAGS CFLAGS CXXFLAGS
-
-  make distclean
-  make mx23_olinuxino_config
-  make u-boot.sb
-}
-
-package() {
-  mkdir -p "${pkgdir}/boot"
-  cp "${srcdir}/u-boot-${pkgver}"/u-boot.sb "${srcdir}"/uEnv.txt "${pkgdir}/boot"
-}

alarm/uboot-olinuxino/uboot-olinuxino.install

@@ -1,22 +0,0 @@
-flash_uboot() {
-  echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0p1."
-  echo "Do you want to do this now? [y|N]"
-  read -r shouldwe
-  if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
-    dd if=/boot/u-boot.sb of=/dev/mmcblk0p1 bs=512 seek=4
-  else
-    echo "You can do this later by running:"
-    echo "# dd if=/boot/u-boot.sb of=/dev/mmcblk0p1 bs=512 seek=4"
-  fi
-}
-
-## arg 1:  the new package version
-post_install() {
-  flash_uboot
-}
-
-## arg 1:  the new package version
-## arg 2:  the old package version
-post_upgrade() {
-  flash_uboot
-}