From 3b9fcef493e8b0150319cb239a5457b25da410c8 Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Sat, 27 Jun 2015 22:25:15 +0000 Subject: [PATCH] core/linux-armv7 to 4.1.0-2 --- ...ags-add-support-for-Marvell-s-u-boot.patch | 6 +- ...trieve-MAC-addresses-from-Marvell-bo.patch | 6 +- .../0003-SMILE-Plug-device-tree-file.patch | 6 +- .../0004-fix-mvsdio-eMMC-timing.patch | 6 +- ...ow-mac-address-to-be-set-as-a-parame.patch | 6 +- ...SoC-Audio-Codec-Fix-errors-reported-.patch | 6 +- ...-set-default-cubietruck-led-triggers.patch | 6 +- .../linux-armv7/0008-USB-armory-support.patch | 329 ++++++++++++++++++ core/linux-armv7/PKGBUILD | 11 +- core/linux-armv7/config | 4 +- 10 files changed, 359 insertions(+), 27 deletions(-) create mode 100644 core/linux-armv7/0008-USB-armory-support.patch diff --git a/core/linux-armv7/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch b/core/linux-armv7/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch index 040cc951c..f650f7443 100644 --- a/core/linux-armv7/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch +++ b/core/linux-armv7/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch @@ -1,7 +1,7 @@ -From 4b71aa5c2f8c1384113abefee4cc04febe5944dd Mon Sep 17 00:00:00 2001 +From c3378026429b3ff9f2236fe0700db7eb7e450a46 Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Sun, 2 Dec 2012 19:59:28 +0100 -Subject: [PATCH 1/7] ARM: atags: add support for Marvell's u-boot +Subject: [PATCH 1/8] ARM: atags: add support for Marvell's u-boot Marvell uses a specific atag in its u-boot which includes among other information the MAC addresses for up to 4 network interfaces. @@ -47,5 +47,5 @@ index 979ff40..d1d0c19 100644 }; -- -2.4.3 +2.4.4 diff --git a/core/linux-armv7/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch b/core/linux-armv7/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch index 763e03307..a5732c62f 100644 --- a/core/linux-armv7/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch +++ b/core/linux-armv7/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch @@ -1,7 +1,7 @@ -From 5c2fcc45bf5f0639fc0779a368fc6708d771e03e Mon Sep 17 00:00:00 2001 +From 8e6e2743ebdc2f46f59190391db3d2f37290047f Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Sun, 2 Dec 2012 19:56:58 +0100 -Subject: [PATCH 2/7] ARM: atags/fdt: retrieve MAC addresses from Marvell boot +Subject: [PATCH 2/8] ARM: atags/fdt: retrieve MAC addresses from Marvell boot loader The atags are parsed and if a Marvell atag is found, up to 4 MAC @@ -43,5 +43,5 @@ index 9448aa0..ac7b6ae 100644 } -- -2.4.3 +2.4.4 diff --git a/core/linux-armv7/0003-SMILE-Plug-device-tree-file.patch b/core/linux-armv7/0003-SMILE-Plug-device-tree-file.patch index 658570c32..1e2edb798 100644 --- a/core/linux-armv7/0003-SMILE-Plug-device-tree-file.patch +++ b/core/linux-armv7/0003-SMILE-Plug-device-tree-file.patch @@ -1,7 +1,7 @@ -From ef219483b7217495b3307abba505067c6935dac4 Mon Sep 17 00:00:00 2001 +From 67570590136361a2bb0ed62beef15151dc1a4572 Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Fri, 5 Sep 2014 15:41:19 -0600 -Subject: [PATCH 3/7] SMILE Plug device tree file +Subject: [PATCH 3/8] SMILE Plug device tree file This adds a dts file for the SMILE Plug, which only differs from the Mirabox dts with the LED definitions. @@ -205,5 +205,5 @@ index 0000000..d01308a + }; +}; -- -2.4.3 +2.4.4 diff --git a/core/linux-armv7/0004-fix-mvsdio-eMMC-timing.patch b/core/linux-armv7/0004-fix-mvsdio-eMMC-timing.patch index 661410516..5f7d7c76b 100644 --- a/core/linux-armv7/0004-fix-mvsdio-eMMC-timing.patch +++ b/core/linux-armv7/0004-fix-mvsdio-eMMC-timing.patch @@ -1,7 +1,7 @@ -From 924f341f6e272bf3356b5f636cfa8e3e62ed02f0 Mon Sep 17 00:00:00 2001 +From 3fe82206833efc04b2625c60eb7f3ea6972d5a53 Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Fri, 5 Sep 2014 15:43:56 -0600 -Subject: [PATCH 4/7] fix mvsdio eMMC timing +Subject: [PATCH 4/8] fix mvsdio eMMC timing These changes from Globalscale change the MMC timing to allow the eMMC versions of the Mirabox and SMILE Plug to work. @@ -34,5 +34,5 @@ index a448498..14441a6 100644 host->clock = ios->clock; host->ns_per_clk = 1000000000 / (host->base_clock / (m+1)); -- -2.4.3 +2.4.4 diff --git a/core/linux-armv7/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch b/core/linux-armv7/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch index 1802f43ec..4fcc9c59d 100644 --- a/core/linux-armv7/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch +++ b/core/linux-armv7/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch @@ -1,7 +1,7 @@ -From adcfd377f7e6887ed91ea999f1dece87f6c1748b Mon Sep 17 00:00:00 2001 +From 0cca0b90853cd9e03a5c6d2018d1fb5c790dce59 Mon Sep 17 00:00:00 2001 From: popcornmix Date: Tue, 18 Feb 2014 01:43:50 -0300 -Subject: [PATCH 5/7] net/smsc95xx: Allow mac address to be set as a parameter +Subject: [PATCH 5/8] net/smsc95xx: Allow mac address to be set as a parameter --- drivers/net/usb/smsc95xx.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++ @@ -91,5 +91,5 @@ index 26423ad..e29a323 100644 if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN, dev->net->dev_addr) == 0) { -- -2.4.3 +2.4.4 diff --git a/core/linux-armv7/0006-ARM-TLV320AIC23-SoC-Audio-Codec-Fix-errors-reported-.patch b/core/linux-armv7/0006-ARM-TLV320AIC23-SoC-Audio-Codec-Fix-errors-reported-.patch index 9974ad307..30148ee70 100644 --- a/core/linux-armv7/0006-ARM-TLV320AIC23-SoC-Audio-Codec-Fix-errors-reported-.patch +++ b/core/linux-armv7/0006-ARM-TLV320AIC23-SoC-Audio-Codec-Fix-errors-reported-.patch @@ -1,7 +1,7 @@ -From fe5199f417904bf8ae27a9939cb585959f98400d Mon Sep 17 00:00:00 2001 +From 493b50d16cd287231bbe11da07f82184d80ceba2 Mon Sep 17 00:00:00 2001 From: dobatog Date: Thu, 26 Feb 2015 12:32:27 +0100 -Subject: [PATCH 6/7] ARM: TLV320AIC23 SoC Audio Codec: Fix errors reported +Subject: [PATCH 6/8] ARM: TLV320AIC23 SoC Audio Codec: Fix errors reported related to input routing signals. The following patch, based on stable v3.19, corrects the errors that are reported in the boot trace in reference to the Input Signals of the audio codec TLV320AIC23: @@ -45,5 +45,5 @@ index cc17e7e..891f3aa 100644 /* input mux */ {"Capture Source", "Line", "Line Input"}, -- -2.4.3 +2.4.4 diff --git a/core/linux-armv7/0007-set-default-cubietruck-led-triggers.patch b/core/linux-armv7/0007-set-default-cubietruck-led-triggers.patch index eda07ccb6..17d461163 100644 --- a/core/linux-armv7/0007-set-default-cubietruck-led-triggers.patch +++ b/core/linux-armv7/0007-set-default-cubietruck-led-triggers.patch @@ -1,7 +1,7 @@ -From a43e9af55ac3116a6ea2d3d0686820ee95e4839a Mon Sep 17 00:00:00 2001 +From b9c28f3bd758d09374fe35e86d5d5d4aeb7c6a0a Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Sun, 14 Jun 2015 13:20:25 -0600 -Subject: [PATCH 7/7] set default cubietruck led triggers +Subject: [PATCH 7/8] set default cubietruck led triggers Signed-off-by: Kevin Mihelich --- @@ -29,5 +29,5 @@ index 8f74a64..1161296 100644 }; -- -2.4.3 +2.4.4 diff --git a/core/linux-armv7/0008-USB-armory-support.patch b/core/linux-armv7/0008-USB-armory-support.patch new file mode 100644 index 000000000..27b2f94ce --- /dev/null +++ b/core/linux-armv7/0008-USB-armory-support.patch @@ -0,0 +1,329 @@ +From 163421a4fef11bea6cf4bdb4ad9de67fb340bb90 Mon Sep 17 00:00:00 2001 +From: Kevin Mihelich +Date: Sat, 7 Mar 2015 16:51:15 -0700 +Subject: [PATCH 8/8] USB armory support + +--- + arch/arm/boot/dts/Makefile | 3 + + arch/arm/boot/dts/imx53-usbarmory-common.dtsi | 209 ++++++++++++++++++++++++++ + arch/arm/boot/dts/imx53-usbarmory-gpio.dts | 26 ++++ + arch/arm/boot/dts/imx53-usbarmory-host.dts | 18 +++ + arch/arm/boot/dts/imx53-usbarmory.dts | 18 +++ + 5 files changed, 274 insertions(+) + create mode 100644 arch/arm/boot/dts/imx53-usbarmory-common.dtsi + create mode 100644 arch/arm/boot/dts/imx53-usbarmory-gpio.dts + create mode 100644 arch/arm/boot/dts/imx53-usbarmory-host.dts + create mode 100644 arch/arm/boot/dts/imx53-usbarmory.dts + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index 2373ab3..27728dd 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -252,6 +252,9 @@ dtb-$(CONFIG_SOC_IMX53) += \ + imx53-smd.dtb \ + imx53-tx53-x03x.dtb \ + imx53-tx53-x13x.dtb \ ++ imx53-usbarmory.dtb \ ++ imx53-usbarmory-gpio.dtb \ ++ imx53-usbarmory-host.dtb \ + imx53-voipac-bsb.dtb + dtb-$(CONFIG_SOC_IMX6Q) += \ + imx6dl-aristainetos_4.dtb \ +diff --git a/arch/arm/boot/dts/imx53-usbarmory-common.dtsi b/arch/arm/boot/dts/imx53-usbarmory-common.dtsi +new file mode 100644 +index 0000000..c7cbd84 +--- /dev/null ++++ b/arch/arm/boot/dts/imx53-usbarmory-common.dtsi +@@ -0,0 +1,209 @@ ++/* ++ * USB armory MkI device tree include file ++ * http://inversepath.com/usbarmory ++ * ++ * Copyright (C) 2015, Inverse Path ++ * Andrej Rosano ++ * ++ * Licensed under GPLv2 ++ */ ++ ++#include "imx53.dtsi" ++ ++/ { ++ model = "Inverse Path USB armory"; ++ compatible = "inversepath,imx53-usbarmory", "fsl,imx53"; ++}; ++ ++/ { ++ chosen { ++ stdout-path = &uart1; ++ }; ++ ++ memory { ++ reg = <0x70000000 0x20000000>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led_pin_gpio4_27>; ++ ++ user { ++ label = "LED"; ++ gpios = <&gpio4 27 0>; ++ linux,default-trigger = "heartbeat"; ++ }; ++ }; ++ ++ soc { ++ aips@60000000 { ++ sahara: crypto@63ff8000 { ++ compatible = "fsl,imx53-sahara"; ++ reg = <0x63ff8000 0x4000>; ++ interrupts = <19 20>; ++ clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>, ++ <&clks IMX5_CLK_SAHARA_IPG_GATE>; ++ clock-names = "ipg", "ahb"; ++ }; ++ }; ++ }; ++}; ++ ++&cpu0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a8"; ++ reg = <0x0>; ++ clocks = <&clks IMX5_CLK_ARM>; ++ clock-latency = <61036>; ++ voltage-tolerance = <5>; ++ operating-points = < ++ /* kHz */ ++ 166666 850000 ++ 400000 900000 ++ 800000 1050000 ++ >; ++}; ++ ++&esdhc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_esdhc1>; ++ status = "okay"; ++}; ++ ++&iomuxc { ++ pinctrl-names = "default"; ++ ++ imx53-usbarmory { ++ pinctrl_pinheader: pinheadergrp { ++ fsl,pins = < ++ MX53_PAD_CSI0_DAT8__GPIO5_26 0xc0 ++ MX53_PAD_CSI0_DAT9__GPIO5_27 0xc0 ++ MX53_PAD_CSI0_DAT10__GPIO5_28 0xc0 ++ MX53_PAD_CSI0_DAT11__GPIO5_29 0xc0 ++ MX53_PAD_CSI0_DAT12__GPIO5_30 0xc0 ++ >; ++ }; ++ ++ led_pin_gpio4_27: led_gpio4_27@0 { ++ fsl,pins = < ++ MX53_PAD_DISP0_DAT6__GPIO4_27 0x80000000 ++ >; ++ }; ++ ++ pinctrl_esdhc1: esdhc1grp { ++ fsl,pins = < ++ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 ++ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 ++ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 ++ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 ++ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 ++ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 ++ >; ++ }; ++ ++ pinctrl_i2c1: i2c1grp { ++ fsl,pins = < ++ MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000 ++ MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000 ++ >; ++ }; ++ ++ pinctrl_uart1: uart1grp { ++ fsl,pins = < ++ MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 ++ MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4 ++ >; ++ }; ++ pinctrl_gpio5: gpio5grp { ++ fsl,pins = < ++ MX53_PAD_CSI0_DAT8__GPIO5_26 0xc0 ++ MX53_PAD_CSI0_DAT9__GPIO5_27 0xc0 ++ MX53_PAD_CSI0_DAT10__GPIO5_28 0xc0 ++ MX53_PAD_CSI0_DAT11__GPIO5_29 0xc0 ++ MX53_PAD_CSI0_DAT12__GPIO5_30 0xc0 ++ >; ++ }; ++ }; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart1>; ++ status = "okay"; ++}; ++ ++&vpu { ++ status = "okay"; ++}; ++ ++&i2c1 { ++ ltc3589: pmic@34 { ++ compatible = "lltc,ltc3589-2"; ++ reg = <0x34>; ++ ++ regulators { ++ sw1_reg: sw1 { ++ regulator-min-microvolt = <591930>; ++ regulator-max-microvolt = <1224671>; ++ lltc,fb-voltage-divider = <100000 158000>; ++ regulator-ramp-delay = <7000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw2_reg: sw2 { ++ regulator-min-microvolt = <704123>; ++ regulator-max-microvolt = <1456803>; ++ lltc,fb-voltage-divider = <180000 191000>; ++ regulator-ramp-delay = <7000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw3_reg: sw3 { ++ regulator-min-microvolt = <1341250>; ++ regulator-max-microvolt = <2775000>; ++ lltc,fb-voltage-divider = <270000 100000>; ++ regulator-ramp-delay = <7000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ bb_out_reg: bb-out { ++ regulator-min-microvolt = <3387341>; ++ regulator-max-microvolt = <3387341>; ++ lltc,fb-voltage-divider = <511000 158000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ldo1_reg: ldo1 { ++ regulator-min-microvolt = <1306329>; ++ regulator-max-microvolt = <1306329>; ++ lltc,fb-voltage-divider = <100000 158000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ ldo2_reg: ldo2 { ++ regulator-min-microvolt = <704123>; ++ regulator-max-microvolt = <1456806>; ++ lltc,fb-voltage-divider = <180000 191000>; ++ regulator-ramp-delay = <7000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ ldo3_reg: ldo3 { ++ regulator-min-microvolt = <2800000>; ++ regulator-max-microvolt = <2800000>; ++ regulator-boot-on; ++ }; ++ ++ ldo4_reg: ldo4 { ++ regulator-min-microvolt = <1200000>; ++ regulator-max-microvolt = <3200000>; ++ }; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/imx53-usbarmory-gpio.dts b/arch/arm/boot/dts/imx53-usbarmory-gpio.dts +new file mode 100644 +index 0000000..bf85ffa +--- /dev/null ++++ b/arch/arm/boot/dts/imx53-usbarmory-gpio.dts +@@ -0,0 +1,26 @@ ++/* ++ * USB armory MkI device mode device tree file ++ * http://inversepath.com/usbarmory ++ * ++ * Copyright (C) 2015, Inverse Path ++ * Andrej Rosano ++ * ++ * Licensed under GPLv2 ++ */ ++ ++/dts-v1/; ++ ++#include "imx53-usbarmory-common.dtsi" ++ ++&usbotg { ++ dr_mode = "peripheral"; ++ status = "okay"; ++}; ++ ++&iomuxc { ++ pinctrl-0 = <&pinctrl_pinheader>; ++}; ++ ++&uart1 { ++ status = "disabled"; ++}; +diff --git a/arch/arm/boot/dts/imx53-usbarmory-host.dts b/arch/arm/boot/dts/imx53-usbarmory-host.dts +new file mode 100644 +index 0000000..ea2ea45 +--- /dev/null ++++ b/arch/arm/boot/dts/imx53-usbarmory-host.dts +@@ -0,0 +1,18 @@ ++/* ++ * USB armory MkI host mode device tree file ++ * http://inversepath.com/usbarmory ++ * ++ * Copyright (C) 2015, Inverse Path ++ * Andrej Rosano ++ * ++ * Licensed under GPLv2 ++ */ ++ ++/dts-v1/; ++ ++#include "imx53-usbarmory-common.dtsi" ++ ++&usbotg { ++ dr_mode = "host"; ++ status = "okay"; ++}; +diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts +new file mode 100644 +index 0000000..902a73b +--- /dev/null ++++ b/arch/arm/boot/dts/imx53-usbarmory.dts +@@ -0,0 +1,18 @@ ++/* ++ * USB armory MkI device mode device tree file ++ * http://inversepath.com/usbarmory ++ * ++ * Copyright (C) 2015, Inverse Path ++ * Andrej Rosano ++ * ++ * Licensed under GPLv2 ++ */ ++ ++/dts-v1/; ++ ++#include "imx53-usbarmory-common.dtsi" ++ ++&usbotg { ++ dr_mode = "peripheral"; ++ status = "okay"; ++}; +-- +2.4.4 + diff --git a/core/linux-armv7/PKGBUILD b/core/linux-armv7/PKGBUILD index 81da83015..3d1a81694 100644 --- a/core/linux-armv7/PKGBUILD +++ b/core/linux-armv7/PKGBUILD @@ -8,7 +8,7 @@ _srcname=linux-4.1 _kernelname=${pkgbase#linux} _desc="ARMv7 multi-platform" pkgver=4.1.0 -pkgrel=1 +pkgrel=2 rcnrel=armv7-x0 arch=('armv7h') url="http://www.kernel.org/" @@ -27,6 +27,7 @@ source=("http://www.kernel.org/pub/linux/kernel/v4.x/${_srcname}.tar.xz" '0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch' '0006-ARM-TLV320AIC23-SoC-Audio-Codec-Fix-errors-reported-.patch' '0007-set-default-cubietruck-led-triggers.patch' + '0008-USB-armory-support.patch' 'config') md5sums=('fe9dc0f6729f36400ea81aa41d614c37' '6666a3775a8bd366bc6501ef954109d2' @@ -38,7 +39,8 @@ md5sums=('fe9dc0f6729f36400ea81aa41d614c37' '118b747e801e6ddfd898c9e356220f28' 'fa1c571243107cb76c265acacc48e05e' '6fb01f0b5cd05de3a44ebf30599eddf9' - 'f8820ca4963b2dbfc32f441bbc96dc5c') + 'be06d6059e1e52c7f33ffd08d021ddfb' + '7c666728ed21ca965ed2ddaef7579ecc') prepare() { cd "${srcdir}/${_srcname}" @@ -57,6 +59,7 @@ prepare() { git apply ../0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch git apply ../0006-ARM-TLV320AIC23-SoC-Audio-Codec-Fix-errors-reported-.patch git apply ../0007-set-default-cubietruck-led-triggers.patch + git apply ../0008-USB-armory-support.patch # AUFS patches cp -ru "${srcdir}/aufs4-standalone/Documentation" . @@ -114,7 +117,7 @@ _package() { optdepends=('crda: to set the correct wireless channels of your country') provides=('kernel26' "linux=${pkgver}" 'aufs_friendly') conflicts=('linux') - replaces=('linux-mvebu' 'linux-udoo' 'linux-sun4i' 'linux-sun5i' 'linux-sun7i') + replaces=('linux-mvebu' 'linux-udoo' 'linux-sun4i' 'linux-sun5i' 'linux-sun7i' 'linux-usbarmory') install=${pkgname}.install cd "${srcdir}/${_srcname}" @@ -161,7 +164,7 @@ _package-headers() { pkgdesc="Header files and scripts for building modules for linux kernel - ${_desc}" provides=("linux-headers=${pkgver}") conflicts=('linux-headers') - replaces=('linux-mvebu-headers' 'linux-sun4i-headers' 'linux-sun5i-headers' 'linux-sun7i-headers') + replaces=('linux-mvebu-headers' 'linux-sun4i-headers' 'linux-sun5i-headers' 'linux-sun7i-headers' 'linux-usbarmory-headers') install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}" diff --git a/core/linux-armv7/config b/core/linux-armv7/config index 72edf8937..f644cb111 100644 --- a/core/linux-armv7/config +++ b/core/linux-armv7/config @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/arm 4.1.0-1 Kernel Configuration +# Linux/arm 4.1.0-2 Kernel Configuration # CONFIG_ARM=y CONFIG_ARM_HAS_SG_CHAIN=y @@ -3790,7 +3790,7 @@ CONFIG_REGULATOR_GPIO=y # CONFIG_REGULATOR_LP3972 is not set # CONFIG_REGULATOR_LP872X is not set # CONFIG_REGULATOR_LP8755 is not set -# CONFIG_REGULATOR_LTC3589 is not set +CONFIG_REGULATOR_LTC3589=y # CONFIG_REGULATOR_MAX1586 is not set # CONFIG_REGULATOR_MAX8649 is not set # CONFIG_REGULATOR_MAX8660 is not set