alarm/uboot-beaglebone to 2017.07-1

This commit is contained in:
Kevin Mihelich 2017-09-02 20:54:53 +00:00
parent 933aa69f99
commit 446c10a6dd
6 changed files with 93 additions and 242 deletions

View file

@ -1,29 +1,27 @@
From d9630c16380114a8b6f6e48a43c72786c5cbadbd Mon Sep 17 00:00:00 2001
From 02714f8c47a6500209907afcc6faf8823e55c0ca Mon Sep 17 00:00:00 2001
From: Kevin Mihelich <kevin@archlinuxarm.org>
Date: Sun, 7 Jun 2015 16:37:53 -0600
Date: Mon, 14 Aug 2017 18:37:05 -0600
Subject: [PATCH] arch linux arm modifications
Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
---
configs/am335x_evm_defconfig | 3 +-
include/configs/am335x_evm.h | 167 ++++++++++++++++++-------------------------
2 files changed, 70 insertions(+), 100 deletions(-)
configs/am335x_boneblack_defconfig | 1 -
include/configs/am335x_evm.h | 8 +++++---
2 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig
index 968d041..3406926 100644
--- a/configs/am335x_evm_defconfig
+++ b/configs/am335x_evm_defconfig
@@ -1,7 +1,6 @@
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/am335x_boneblack_defconfig b/configs/am335x_boneblack_defconfig
index 3d86c1b34e..b8a72e57df 100644
--- a/configs/am335x_boneblack_defconfig
+++ b/configs/am335x_boneblack_defconfig
@@ -5,7 +5,6 @@ CONFIG_AM33XX=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_STACK_R_ADDR=0x82000000
-CONFIG_SYS_EXTRA_OPTIONS="NAND"
-CONFIG_CONS_INDEX=1
+CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
CONFIG_ARM=y
CONFIG_TARGET_AM335X_EVM=y
CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index a87059c..e68e848 100644
index 0c6d2880da..9afc46411d 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -17,6 +17,7 @@
@ -33,216 +31,29 @@ index a87059c..e68e848 100644
+#define CONFIG_ENV_IS_NOWHERE
#ifndef CONFIG_SPL_BUILD
#ifndef CONFIG_FIT
@@ -45,6 +46,9 @@
/* Enhance our eMMC support / experience. */
#define CONFIG_CMD_GPT
#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_PART
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_SETEXPR
# define CONFIG_TIMESTAMP
@@ -76,10 +77,7 @@
#ifdef CONFIG_NAND
#define NANDARGS \
@@ -70,110 +74,79 @@
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
- "boot_fdt=try\0" \
- "bootpart=0:2\0" \
+ "bootpart=0:1\0" \
"bootdir=/boot\0" \
+ "fdtdir=/boot/dtbs\0" \
"bootfile=zImage\0" \
"fdtfile=undefined\0" \
+ "rdfile=initramfs-linux.img\0" \
"console=ttyO0,115200n8\0" \
"partitions=" \
"uuid_disk=${uuid_gpt_disk};" \
"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
"optargs=\0" \
- "mmcdev=0\0" \
- "mmcroot=/dev/mmcblk0p2 ro\0" \
- "mmcrootfstype=ext4 rootwait\0" \
- "rootpath=/export/rootfs\0" \
- "nfsopts=nolock\0" \
- "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
- "::off\0" \
- "ramroot=/dev/ram0 rw\0" \
- "ramrootfstype=ext2\0" \
+ "cape_disable=\0" \
+ "cape_enable=\0" \
+ "cmdline=\0" \
"mmcargs=setenv bootargs console=${console} " \
"${optargs} " \
- "root=${mmcroot} " \
- "rootfstype=${mmcrootfstype}\0" \
- "spiroot=/dev/mtdblock4 rw\0" \
- "spirootfstype=jffs2\0" \
- "spisrcaddr=0xe0000\0" \
- "spiimgsize=0x362000\0" \
- "spibusno=0\0" \
- "spiargs=setenv bootargs console=${console} " \
- "${optargs} " \
- "root=${spiroot} " \
- "rootfstype=${spirootfstype}\0" \
- "netargs=setenv bootargs console=${console} " \
- "${optargs} " \
- "root=/dev/nfs " \
- "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
- "ip=dhcp\0" \
- "bootenv=uEnv.txt\0" \
- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
- "source ${loadaddr}\0" \
- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
- "importbootenv=echo Importing environment from mmc ...; " \
- "env import -t -r $loadaddr $filesize\0" \
- "ramargs=setenv bootargs console=${console} " \
- "${optargs} " \
- "root=${ramroot} " \
- "rootfstype=${ramrootfstype}\0" \
- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
- "mmcloados=run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootz ${loadaddr} - ${fdtaddr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
- "mmcboot=mmc dev ${mmcdev}; " \
- "if mmc rescan; then " \
- "echo SD/MMC found on device ${mmcdev};" \
- "if run loadbootscript; then " \
- "run bootscript;" \
- "else " \
- "if run loadbootenv; then " \
- "echo Loaded environment from ${bootenv};" \
- "run importbootenv;" \
+ "${cape_disable} " \
+ "${cape_enable} " \
+ "root=${root} " \
+ "${cmdline}\0" \
+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
+ "mmcboot=usb start;" \
+ "for devtype in mmc usb; do " \
+ "for devnum in 0 1; do " \
+ "if ${devtype} dev ${devnum}; then " \
+ "echo ${devtype} found on device ${devnum};" \
+ "setenv bootpart ${devnum}:1;" \
+ "part uuid ${devtype} ${bootpart} uuid;" \
+ "setenv root PARTUUID=${uuid} rw rootwait fixrtc;" \
+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
+ "gpio set 54;" \
+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
+ "env import -t ${loadaddr} ${filesize};" \
+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
+ "if test -n ${cape}; then " \
+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtbase}-${cape}.dtb; then " \
+ "setenv fdtfile ${fdtbase}-${cape}.dtb; " \
+ "fi; " \
+ "echo using: $fdtfile...; " \
+ "fi; " \
+ "echo Checking if uenvcmd is set ...;" \
+ "if test -n ${uenvcmd}; then " \
+ "echo Running uenvcmd ...;" \
+ "run uenvcmd;" \
+ "fi;" \
+ "fi;" \
+ "gpio set 55;" \
+ "if run loadimage; then " \
+ "run mmcargs;" \
+ "if run loadfdt; then " \
+ "gpio set 56;" \
+ "if run loadrd; then " \
+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
+ "else " \
+ "bootz ${loadaddr} - ${fdtaddr};" \
+ "fi;" \
+ "fi;" \
+ "else " \
+ "echo No kernel found;" \
+ "fi;" \
+ "gpio clear 54; gpio clear 55;" \
+ "setexpr devnum ${devnum} + 1;" \
"fi;" \
- "if test -n $uenvcmd; then " \
- "echo Running uenvcmd ...;" \
- "run uenvcmd;" \
- "fi;" \
- "if run loadimage; then " \
- "run mmcloados;" \
- "fi;" \
- "fi ;" \
- "fi;\0" \
- "spiboot=echo Booting from spi ...; " \
- "run spiargs; " \
- "sf probe ${spibusno}:0; " \
- "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
- "bootz ${loadaddr}\0" \
- "netboot=echo Booting from network ...; " \
- "setenv autoload no; " \
- "dhcp; " \
- "tftp ${loadaddr} ${bootfile}; " \
- "tftp ${fdtaddr} ${fdtfile}; " \
- "run netargs; " \
- "bootz ${loadaddr} - ${fdtaddr}\0" \
- "ramboot=echo Booting from ramdisk ...; " \
- "run ramargs; " \
- "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
+ "done;" \
+ "done;\0" \
"findfdt="\
"if test $board_name = A335BONE; then " \
- "setenv fdtfile am335x-bone.dtb; fi; " \
+ "setenv fdtfile am335x-bone.dtb; setenv fdtbase am335x-bone; fi; " \
"if test $board_name = A335BNLT; then " \
- "setenv fdtfile am335x-boneblack.dtb; fi; " \
+ "setenv fdtfile am335x-boneblack.dtb; setenv fdtbase am335x-boneblack; setenv umsmedia 1; fi; " \
"if test $board_name = A33515BB; then " \
"setenv fdtfile am335x-evm.dtb; fi; " \
"if test $board_name = A335X_SK; then " \
@@ -185,12 +158,11 @@
#endif
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
- func(LEGACY_MMC, legacy_mmc, 0) \
func(MMC, mmc, 1) \
- func(LEGACY_MMC, legacy_mmc, 1) \
- func(NAND, nand, 0) \
func(PXE, pxe, na) \
func(DHCP, dhcp, na)
#define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
- "run mmcboot;" \
- "setenv mmcdev 1; " \
- "setenv bootpart 1:2; " \
+ "gpio set 53;" \
+ "run findfdt;" \
"run mmcboot;" \
- "run nandboot;"
+ "gpio clear 54; gpio clear 55;" \
+ "gpio set 56"
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
@@ -329,9 +301,8 @@
#endif
#ifdef CONFIG_MUSB_GADGET
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
/* USB TI's IDs */
#define CONFIG_G_DNL_VENDOR_NUM 0x0451
@@ -87,6 +85,10 @@
"if test ${boot_fit} -eq 1; then " \
"run update_to_fit;" \
"fi;" \
+ "gpio clear 54; " \
+ "gpio clear 55; " \
+ "gpio clear 56; " \
+ "gpio set 53; " \
"run findfdt; " \
"run init_console; " \
"run envboot; " \
--
2.4.2
2.14.1

View file

@ -4,38 +4,45 @@
buildarch=4
pkgname=uboot-beaglebone
pkgver=2015.04
pkgver=2017.07
pkgrel=1
pkgdesc="U-Boot for Beaglebone and Beaglebone Black"
arch=('armv7h')
url="http://git.denx.de/u-boot.git/"
makedepends=('git' 'bc')
makedepends=('bc' 'dtc' 'git')
license=('GPL')
install=${pkgname}.install
source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
backup=('boot/boot.txt' 'boot/boot.scr')
source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver/rc/-rc}.tar.bz2"
'0001-arch-linux-arm-modifications.patch'
'uEnv.txt')
md5sums=('570bdc2c47270c2a98ca60ff6c5c74cd'
'b09551195d8c45ab7c0ec5df8d66e522'
'ccb79775b81654e16fca18825c7f2506')
'boot.txt'
'mkscr')
md5sums=('b74741e7a9ad1cf9a5bfa87302b80f2b'
'a0bc17acb85fc3f04f74f6a87453ac97'
'd9fd8313c6e8b6d217676a69c3813a95'
'021623a04afd29ac3f368977140cfbfd')
prepare() {
cd u-boot-${pkgver}
cd u-boot-${pkgver/rc/-rc}
git apply ../0001-arch-linux-arm-modifications.patch
}
build() {
cd u-boot-${pkgver}
cd u-boot-${pkgver/rc/-rc}
unset CFLAGS CXXFLAGS LDFLAGS
make distclean
make am335x_evm_config
make
make am335x_boneblack_defconfig
echo 'CONFIG_IDENT_STRING=" Arch Linux ARM"' >> .config
make EXTRAVERSION=-${pkgrel}
}
package() {
cd u-boot-${pkgver}
cd u-boot-${pkgver/rc/-rc}
mkdir -p "${pkgdir}"/boot
cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot
cp MLO u-boot.img "${pkgdir}"/boot
tools/mkimage -A arm -O linux -T script -C none -n "U-Boot boot script" -d ../boot.txt "${pkgdir}"/boot/boot.scr
cp ../{boot.txt,mkscr} "${pkgdir}"/boot
}

View file

@ -0,0 +1,21 @@
# After modifying, run ./mkscr
if test -n ${distro_bootpart}; then setenv bootpart ${distro_bootpart}; else setenv bootpart 1; fi
part uuid ${devtype} ${devnum}:${bootpart} uuid
setenv bootargs "console=tty0 console=${console} root=PARTUUID=${uuid} rw rootwait"
if load ${devtype} ${devnum}:${bootpart} ${kernel_addr_r} /boot/zImage; then
gpio set 54
echo fdt: ${fdtfile}
if load ${devtype} ${devnum}:${bootpart} ${fdt_addr_r} /boot/dtbs/${fdtfile}; then
gpio set 55
if load ${devtype} ${devnum}:${bootpart} ${ramdisk_addr_r} /boot/initramfs-linux.img; then
gpio set 56
bootz ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr_r};
else
gpio set 56
bootz ${kernel_addr_r} - ${fdt_addr_r};
fi;
fi;
fi

9
alarm/uboot-beaglebone/mkscr Executable file
View file

@ -0,0 +1,9 @@
#!/bin/bash
if [[ ! -x /usr/bin/mkimage ]]; then
echo "mkimage not found. Please install uboot-tools:"
echo " pacman -S uboot-tools"
exit 1
fi
mkimage -A arm -O linux -T script -C none -n "U-Boot boot script" -d boot.txt boot.scr

View file

@ -1 +0,0 @@
optargs=coherent_pool=1M

View file

@ -29,4 +29,8 @@ post_install() {
post_upgrade() {
flash_uboot
if (( $(vercmp $2 2017.07-1) < 0 )); then
echo ' >>> Note: uEnv.txt is no longer sourced. Make any customizations within /boot/boot.txt'
echo ' and run ./mkscr within /boot to convert it to the boot.scr file.'
fi
}