core/linux-raspberrypi/config

Add cpu gov, config options, and USB nik naks

core/linux-raspberrypi/config

@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/arm 3.2.27-2 Kernel Configuration
+# Linux/arm 3.2.27-5 Kernel Configuration
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -17,10 +17,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_FIQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 # CONFIG_ARM_PATCH_PHYS_VIRT is not set
 CONFIG_NEED_MACH_MEMORY_H=y
@@ -395,6 +397,29 @@ CONFIG_ATAGS_PROC=y
 #
 # CPU Power Management
 #
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+
+#
+# ARM CPU frequency scaling drivers
+#
+CONFIG_ARM_BCM2835_CPUFREQ=y
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_IDLE_GOV_MENU=y
@@ -475,8 +500,21 @@ CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
 CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=m
@@ -974,7 +1012,8 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_DRBD is not set
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
@@ -1277,9 +1316,6 @@ CONFIG_RT2X00_LIB_FIRMWARE=y
 CONFIG_RT2X00_LIB_CRYPTO=y
 CONFIG_RT2X00_LIB_LEDS=y
 # CONFIG_RT2X00_DEBUG is not set
-CONFIG_RTL8192CU=m
-CONFIG_RTLWIFI=m
-CONFIG_RTL8192C_COMMON=m
 CONFIG_WL1251=m
 # CONFIG_WL1251_SPI is not set
 # CONFIG_WL1251_SDIO is not set
@@ -1289,6 +1325,7 @@ CONFIG_ZD1211RW=m
 # CONFIG_ZD1211RW_DEBUG is not set
 CONFIG_MWIFIEX=m
 CONFIG_MWIFIEX_SDIO=m
+CONFIG_RTL8192CU=m
 
 #
 # WiMAX Wireless Broadband devices
@@ -1671,7 +1708,7 @@ CONFIG_IR_SONY_DECODER=m
 CONFIG_IR_RC5_SZ_DECODER=m
 CONFIG_IR_MCE_KBD_DECODER=m
 CONFIG_IR_LIRC_CODEC=m
-# CONFIG_RC_ATI_REMOTE is not set
+CONFIG_RC_ATI_REMOTE=m
 CONFIG_IR_IMON=m
 CONFIG_IR_MCEUSB=m
 CONFIG_IR_REDRAT3=m
@@ -2691,7 +2728,9 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
+CONFIG_NFS_V4_1=y
+CONFIG_PNFS_FILE_LAYOUT=y
+CONFIG_PNFS_BLOCK=m
 CONFIG_ROOT_NFS=y
 CONFIG_NFS_FSCACHE=y
 CONFIG_NFS_USE_LEGACY_DNS=y
@@ -2707,6 +2746,7 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BACKCHANNEL=y
 # CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
@@ -3045,5 +3085,6 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
+CONFIG_LRU_CACHE=m
 CONFIG_AVERAGE=y
 # CONFIG_CORDIC is not set