removed alarm/uboot-oxnas

alarm/uboot-oxnas/PKGBUILD

@@ -1,43 +0,0 @@
-# U-Boot: PLX/Oxford Semiconductor NAS7820
-# Maintainer: Kevin Mihelich <kevin@archlinuxarm.org>
-
-buildarch=2
-
-pkgname=uboot-oxnas
-pkgver=2013.10
-pkgrel=2
-pkgdesc="U-Boot for PLX/Oxford Semiconductor NAS7820"
-arch=('arm')
-url="https://github.com/linux-sunxi/u-boot-sunxi/tree/sunxi-current"
-license=('GPL')
-_commit=a0140080d966a080fe0c7f5e3a5a84856e02a32e
-source=("https://github.com/kref/u-boot-oxnas/archive/${_commit}.tar.gz"
-        'alarm.patch'
-        'packager'
-        'flash')
-md5sums=('27d8094d90aaffcbf7527f963f498504'
-         '0633e9da16f0fd4957883b55e67900c8'
-         '9c38473d3e0168eefe38f41413bd77d8'
-         'fe2586f3eeb43b5b533e9e85175d13f9')
-
-prepare() {
-  cd u-boot-oxnas-${_commit}
-  patch -p1 -i "${srcdir}"/alarm.patch
-}
-
-build() {
-  cd u-boot-oxnas-${_commit}
-  
-  unset CFLAGS CXXFLAGS LDFLAGS
-  
-  make distclean
-  make ox820_ext4_config
-  make u-boot.{bin,img} spl/u-boot-spl.bin
-  ../packager u-boot.{bin,wrapped} || true
-}
-
-package() {
-  mkdir -p "${pkgdir}"/boot
-  cp u-boot-oxnas-${_commit}/{u-boot.{wrapped,img},spl/u-boot-spl.bin} "${pkgdir}"/boot
-  cp flash "${pkgdir}"/boot
-}

alarm/uboot-oxnas/alarm.patch

@@ -1,85 +0,0 @@
-diff -urN a/include/configs/ox820.h b/include/configs/ox820.h
---- a/include/configs/ox820.h	2014-01-03 05:19:54.000000000 -0700
-+++ b/include/configs/ox820.h	2014-01-24 19:47:31.542099246 -0700
-@@ -28,7 +28,7 @@
- #define CONFIG_SYS_DCACHE_OFF
- 
- /* clock */
--#define CONFIG_PLLA_FREQ_MHZ		800
-+#define CONFIG_PLLA_FREQ_MHZ		850
- #define CONFIG_RPSCLK			6250000
- #define CONFIG_SYS_HZ			1000
- #define CONFIG_SYS_CLK_FREQ		CONFIG_RPSCLK
-@@ -63,7 +63,7 @@
- #define NAND_ALE_ADDR_PIN		18
- #define MTDPARTS_DEFAULT		"mtdparts=41000000.nand:" \
- 						"14m(boot)," \
--                                                "-(data)"
-+						"-(data)"
- #define MTDIDS_DEFAULT			"nand0=41000000.nand"
- 
- /* net */
-@@ -179,6 +179,8 @@
- /* boot */
- #define CONFIG_IDENT_STRING		" for OXNAS"
- #define CONFIG_MACH_TYPE		MACH_TYPE_OXNAS
-+#define CONFIG_OF_SEPARATE
-+#define CONFIG_DEFAULT_DEVICE_TREE	"ox820-pogoplug-pro"
- #ifndef CONFIG_SPL_BUILD
- /* Enable devicetree support */
- #define CONFIG_OF_LIBFDT
-@@ -194,8 +196,9 @@
- /* memtest works on */
- #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE)
- #define CONFIG_SYS_AUTOLOAD		"no"
-+#define CONFIG_CMD_BOOTZ
- 
--#define CONFIG_BOOTARGS			"console=ttyS0,115200n8 root=/dev/sda2 ubi.mtd=data,512"
-+#define CONFIG_BOOTARGS			"console=ttyS0,115200n8 root=/dev/sda1 rw rootwait " MTDPARTS_DEFAULT
- #define CONFIG_BOOTCOMMAND		"run ideboot"
- #define CONFIG_BOOT_RETRY_TIME		-1
- #define CONFIG_RESET_TO_RETRY		60
-@@ -205,18 +208,26 @@
- #define CONFIG_IPADDR			192.168.0.100
- 
- #define CONFIG_EXTRA_ENV_SETTINGS	\
--	"updboot=" \
--				"bootp;" \
--				"tftp 60000000 u-boot.img;" \
--				"ide write 60000000 400 400\0" \
--	"console=" CONFIG_DEFAULT_CONSOLE \
--	"bootargs=" CONFIG_DEFAULT_CONSOLE \
--	"mtdids=" MTDIDS_DEFAULT "\0" \
--	"mtdparts=" MTDPARTS_DEFAULT "\0" \
-+	"console="      CONFIG_DEFAULT_CONSOLE \
-+	"bootargs="	CONFIG_BOOTARGS "\0" \
-+	"ideboot=" \
-+			"load ide 0:1 0x60500000 /boot/zImage;" \
-+			"load ide 0:1 0x67e26000 /boot/dtbs/ox820-pogoplug-pro.dtb;" \
-+			"bootz 0x60500000 - 0x67e26000" "\0" \
-+	"usbboot=" \
-+			"usb start;" \
-+			"load usb 0:1 0x60500000 /boot/zImage;" \
-+			"load usb 0:1 0x67e26000 /boot/dtbs/ox820-pogoplug-pro.dtb;" \
-+			"usb stop;" \
-+			"setenv bootargs " \
-+				"console=ttyS0,115200n8 " \
-+				"root=/dev/sdb1 rw rootwait " \
-+				MTDPARTS_DEFAULT ";" \
-+			"bootz 0x60500000 - 0x67e26000" "\0" \
- 	"safeboot=" \
- 			"setexpr.b keypressed '*44200005' '&' 1;" \
- 			"if test $keypressed = 0;" \
--				"then run netcon;" \
-+				"then run serialcon;" \
- 			"fi" "\0" \
- 	"serialcon=" \
- 			"echo switch to serial console;" \
-@@ -324,6 +335,7 @@
- #define CONFIG_FAT_WRITE
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_EXT4
-+#define CONFIG_CMD_FS_GENERIC
- #ifndef CONFIG_SPL_BUILD
- #define CONFIG_CMD_EXT4_WRITE
- #endif

alarm/uboot-oxnas/flash

@@ -1,35 +0,0 @@
-#!/bin/sh
-
-# uncomment line below and set to the correct disk
-#disk=/dev/sdX
-
-if [ -z "${disk}" ] ; then
-   echo "You must uncomment/set the 'disk' variable"
-   exit -1
-fi
-
-stage1File=/boot/u-boot-spl.bin
-ubootFile=/boot/u-boot.wrapped
-
-perl <<EOF | dd of="$disk" bs=512
-    print "\x00" x 0x1a4;
-    print "\x00\x5f\x01\x00";
-    print "\x00\xdf\x00\x00";
-    print "\x00\x80\x00\x00";
-    print "\x00" x (0x1b0 -0x1a4 -12 );
-    print "\x22\x80\x00\x00";
-    print "\x22\x00\x00\x00";
-    print "\x00\x80\x00\x00";
-EOF
-
-if [ -f $stage1File ];then
-        echo "Writing stage 1"
-        dd if=$stage1File    of="$disk" bs=512 seek=34
-fi
-
-if [ -f $ubootFile ];then
-        echo "Writing uboot"
-        dd if=$ubootFile     of="$disk" bs=512 seek=154
-fi
-
-sync