diff --git a/alarm/uboot-udoo/0001-arch-linux-arm-modifications.patch b/alarm/uboot-udoo/0001-arch-linux-arm-modifications.patch
index e0881834b..5493b41f4 100644
--- a/alarm/uboot-udoo/0001-arch-linux-arm-modifications.patch
+++ b/alarm/uboot-udoo/0001-arch-linux-arm-modifications.patch
@@ -1,292 +1,53 @@
-From fba6302e331dfc82aae917673c8beb1602660fcd Mon Sep 17 00:00:00 2001
+From 446af39a88aa7a8f63a2e484df8bb828851e47ec Mon Sep 17 00:00:00 2001
 From: Kevin Mihelich <kevin@archlinuxarm.org>
-Date: Sat, 3 Jan 2015 14:32:48 -0700
+Date: Tue, 26 Jul 2016 21:28:27 -0600
 Subject: [PATCH] arch linux arm modifications
 
 ---
- board/udoo/1066mhz_4x256mx16_dl.cfg |  58 ++++++++++++++++
- board/udoo/ddr-setup_dl.cfg         |  84 ++++++++++++++++++++++
- board/udoo/udoo-dl.cfg              |  29 ++++++++
- configs/udoo_dl_defconfig           |   3 +
- include/configs/udoo.h              | 135 ++++++++++++++++++++++--------------
- 5 files changed, 256 insertions(+), 53 deletions(-)
- create mode 100644 board/udoo/1066mhz_4x256mx16_dl.cfg
- create mode 100644 board/udoo/ddr-setup_dl.cfg
- create mode 100644 board/udoo/udoo-dl.cfg
- create mode 100644 configs/udoo_dl_defconfig
+ include/configs/udoo.h | 103 +++++++++++++++++++++++--------------------------
+ 1 file changed, 49 insertions(+), 54 deletions(-)
 
-diff --git a/board/udoo/1066mhz_4x256mx16_dl.cfg b/board/udoo/1066mhz_4x256mx16_dl.cfg
-new file mode 100644
-index 0000000..e37c9f9
---- /dev/null
-+++ b/board/udoo/1066mhz_4x256mx16_dl.cfg
-@@ -0,0 +1,58 @@
-+/*
-+ * Copyright (C) 2013 Seco USA Inc
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+
-+DATA 4, MX6_MMDC_P0_MDPDC,	0x0002002D
-+DATA 4, MX6_MMDC_P0_MDOTC,	0x00333040
-+
-+DATA 4, MX6_MMDC_P0_MDCFG0,	0x3F4352F3
-+DATA 4, MX6_MMDC_P0_MDCFG1,	0xB66D8B63
-+DATA 4, MX6_MMDC_P0_MDCFG2,	0x01FF00DB
-+
-+DATA 4, MX6_MMDC_P0_MDMISC,	0x00001740
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x00008000
-+DATA 4, MX6_MMDC_P0_MDRWD,	0x000026D2
-+
-+
-+DATA 4, MX6_MMDC_P0_MDOR,	0x00431023
-+DATA 4, MX6_MMDC_P0_MDASP,	0x00000027
-+DATA 4, MX6_MMDC_P0_MDCTL,	0x831A0000
-+
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x02008032
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x00008033
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x00048031
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x05208030
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x04008040
-+
-+DATA 4, MX6_MMDC_P0_MPZQHWCTRL,	0xa1390003
-+DATA 4, MX6_MMDC_P1_MPZQHWCTRL,	0xa1390003
-+
-+DATA 4, MX6_MMDC_P0_MDREF,	0x00007800
-+
-+DATA 4, MX6_MMDC_P0_MPODTCTRL,	0x00022227
-+DATA 4, MX6_MMDC_P1_MPODTCTRL,	0x00022227
-+
-+DATA 4, MX6_MMDC_P0_MPDGCTRL0,	0x425C0251
-+DATA 4, MX6_MMDC_P0_MPDGCTRL1,	0x021B021E
-+DATA 4, MX6_MMDC_P1_MPDGCTRL0,	0x021B021E
-+DATA 4, MX6_MMDC_P1_MPDGCTRL1,	0x01730200
-+
-+DATA 4, MX6_MMDC_P0_MPRDDLCTL,	0x45474C45
-+DATA 4, MX6_MMDC_P1_MPRDDLCTL,	0x44464744
-+DATA 4, MX6_MMDC_P0_MPWRDLCTL,	0x3F3F3336
-+DATA 4, MX6_MMDC_P1_MPWRDLCTL,	0x32383630
-+
-+DATA 4, MX6_MMDC_P0_MPWLDECTRL0,	0x002F0038
-+DATA 4, MX6_MMDC_P0_MPWLDECTRL1,	0x001F001F
-+DATA 4, MX6_MMDC_P1_MPWLDECTRL0,	0x001F001F
-+DATA 4, MX6_MMDC_P1_MPWLDECTRL1,	0x001F001F
-+
-+DATA 4, MX6_MMDC_P0_MPMUR0,	0x00000000
-+DATA 4, MX6_MMDC_P1_MPMUR0,	0x00000000
-+
-+DATA 4, MX6_MMDC_P0_MDPDC,	0x0002556D
-+DATA 4, MX6_MMDC_P0_MAPSR,	0x00011006
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x00000000
-diff --git a/board/udoo/ddr-setup_dl.cfg b/board/udoo/ddr-setup_dl.cfg
-new file mode 100644
-index 0000000..487570e
---- /dev/null
-+++ b/board/udoo/ddr-setup_dl.cfg
-@@ -0,0 +1,84 @@
-+/*
-+ * Copyright (C) 2013 Seco USA Inc
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ *
-+ * Device Configuration Data (DCD)
-+ *
-+ * Each entry must have the format:
-+ * Addr-type           Address        Value
-+ *
-+ * where:
-+ *      Addr-type register length (1,2 or 4 bytes)
-+ *      Address   absolute address of the register
-+ *      value     value to be stored in the register
-+ */
-+
-+/*
-+ * DDR3 settings
-+ * MX6Q    ddr is limited to 1066 Mhz	currently 1056 MHz(528 MHz clock),
-+ *	   memory bus width: 64 bits	x16/x32/x64
-+ * MX6DL   ddr is limited to 800 MHz(400 MHz clock)
-+ *	   memory bus width: 64 bits	x16/x32/x64
-+ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock)
-+ *	   memory bus width: 32 bits	x16/x32
-+ */
-+DATA 4, MX6_IOM_DRAM_SDQS0,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS1,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS2,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS3,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS4,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS5,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS6,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS7,	0x00000028
-+
-+DATA 4, MX6_IOM_GRP_B0DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B1DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B2DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B3DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B4DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B5DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B6DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B7DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_ADDDS,	0x00000028
-+
-+DATA 4, MX6_IOM_GRP_CTLDS,	0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_DQM0,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM1,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM2,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM3,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM4,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM5,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM6,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM7,	0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_CAS,	0x00000028
-+DATA 4, MX6_IOM_DRAM_RAS,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDCLK_0,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDCLK_1,	0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_RESET,	0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_SDODT0,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDODT1,	0x00000028
-+
-+/* (differential input) */
-+DATA 4, MX6_IOM_DDRMODE_CTL,	0x00020000
-+/* (differential input) */
-+DATA 4, MX6_IOM_GRP_DDRMODE,	0x00020000
-+/* disable ddr pullups */
-+DATA 4, MX6_IOM_GRP_DDRPKE,	0x00000000
-+DATA 4, MX6_IOM_DRAM_SDBA2,	0x00000000
-+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
-+DATA 4, MX6_IOM_GRP_DDR_TYPE,	0x000C0000
-+
-+/* Read data DQ Byte0-3 delay */
-+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL,	0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL,	0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL,	0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL,	0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL,	0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL,	0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL,	0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL,	0x33333333
-diff --git a/board/udoo/udoo-dl.cfg b/board/udoo/udoo-dl.cfg
-new file mode 100644
-index 0000000..46953c1
---- /dev/null
-+++ b/board/udoo/udoo-dl.cfg
-@@ -0,0 +1,29 @@
-+/*
-+ * Copyright (C) 2013 Boundary Devices
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ *
-+ * Refer doc/README.imximage for more details about how-to configure
-+ * and create imximage boot image
-+ *
-+ * The syntax is taken as close as possible with the kwbimage
-+ */
-+
-+/* image version */
-+IMAGE_VERSION 2
-+
-+/*
-+ * Boot Device : one of
-+ * spi, sd (the board has no nand neither onenand)
-+ */
-+BOOT_FROM      sd
-+
-+#define __ASSEMBLY__
-+#include <config.h>
-+#include "asm/arch/mx6-ddr.h"
-+#include "asm/arch/iomux.h"
-+#include "asm/arch/crm_regs.h"
-+
-+#include "ddr-setup_dl.cfg"
-+#include "1066mhz_4x256mx16_dl.cfg"
-+#include "clocks.cfg"
-diff --git a/configs/udoo_dl_defconfig b/configs/udoo_dl_defconfig
-new file mode 100644
-index 0000000..5dc9016
---- /dev/null
-+++ b/configs/udoo_dl_defconfig
-@@ -0,0 +1,3 @@
-+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/udoo/udoo-dl.cfg,MX6DL,DDR_MB=1024"
-+CONFIG_ARM=y
-+CONFIG_TARGET_UDOO=y
 diff --git a/include/configs/udoo.h b/include/configs/udoo.h
-index 700e9c1..7fdce0f 100644
+index fba78d0..b96f490 100644
 --- a/include/configs/udoo.h
 +++ b/include/configs/udoo.h
-@@ -78,7 +78,7 @@
- #define CONFIG_CMD_BMODE
- #define CONFIG_CMD_SETEXPR
- 
--#define CONFIG_BOOTDELAY		3
-+#define CONFIG_BOOTDELAY		1
- 
- #define CONFIG_SYS_MEMTEST_START	0x10000000
- #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
-@@ -96,60 +96,97 @@
- #define CONFIG_BOUNCE_BUFFER
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_FAT
-+#define CONFIG_CMD_EXT4
-+#define CONFIG_CMD_FS_GENERIC
- #define CONFIG_DOS_PARTITION
+@@ -18,6 +18,8 @@
+ #define MACH_TYPE_UDOO		4800
+ #define CONFIG_MACH_TYPE	MACH_TYPE_UDOO
  
 +#define CONFIG_IDENT_STRING " Arch Linux ARM"
 +
-+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
-+#define CONFIG_DEFAULT_FDT_FILE		"imx6dl-udoo.dtb"
-+#elif defined(CONFIG_MX6Q)
- #define CONFIG_DEFAULT_FDT_FILE		"imx6q-udoo.dtb"
-+#endif
+ /* Size of malloc() pool */
+ #define CONFIG_SYS_MALLOC_LEN		(2 * SZ_1M)
+ 
+@@ -63,7 +65,6 @@
+ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  
  #define CONFIG_EXTRA_ENV_SETTINGS \
 -	"script=boot.scr\0" \
--	"image=zImage\0" \
--	"console=ttymxc1\0" \
-+	"bootfile=zImage\0" \
-+	"bootdir=/boot\0" \
-+	"console=ttymxc1,115200\0" \
+ 	"image=zImage\0" \
+ 	"console=ttymxc1\0" \
  	"splashpos=m,m\0" \
- 	"fdt_high=0xffffffff\0" \
+@@ -71,47 +72,50 @@
+ 	"initrd_high=0xffffffff\0" \
+ 	"fdt_file=undefined\0" \
+ 	"fdt_addr=0x18000000\0" \
+-	"boot_fdt=try\0" \
 +	"rdaddr=0x12A00000\0" \
 +	"rdfile=initramfs-linux.img\0" \
- 	"initrd_high=0xffffffff\0" \
--	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
--	"fdt_addr=0x18000000\0" \
--	"boot_fdt=try\0" \
-+	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
-+	"fdtdir=/boot/dtbs\0" \
-+	"fdtaddr=0x18000000\0" \
- 	"ip_dyn=yes\0" \
 +	"optargs=\0" \
 +	"video=\0" \
+ 	"ip_dyn=yes\0" \
  	"mmcdev=0\0" \
--	"mmcpart=1\0" \
+ 	"mmcpart=1\0" \
 -	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 -	"update_sd_firmware_filename=u-boot.imx\0" \
 -	"update_sd_firmware=" \
 -		"if test ${ip_dyn} = yes; then " \
 -			"setenv get_cmd dhcp; " \
-+	"mmcroot=/dev/mmcblk0p1 rw rootwait\0" \
-+	"mmcargs=setenv bootargs console=${console} " \
-+		"${optargs} " \
-+		"root=${mmcroot} " \
-+		"video=${video}\0" \
-+	"videoargs=" \
-+		"setenv nextcon 0; " \
-+		"if hdmidet; then " \
-+			"setenv bootargs ${bootargs} " \
-+				"video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
-+					"if=RGB24; " \
-+			"setenv fbmem fbmem=28M; " \
-+			"setexpr nextcon ${nextcon} + 1; " \
- 		"else " \
+-		"else " \
 -			"setenv get_cmd tftp; " \
-+			"echo - no HDMI monitor;" \
- 		"fi; " \
+-		"fi; " \
 -		"if mmc dev ${mmcdev}; then "	\
 -			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
 -				"setexpr fw_sz ${filesize} / 0x200; " \
@@ -294,43 +55,32 @@ index 700e9c1..7fdce0f 100644
 -				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 -			"fi; "	\
 -		"fi\0" \
--	"mmcargs=setenv bootargs console=${console},${baudrate} " \
++	"mmcroot=/dev/mmcblk0p1 rootwait rw\0" \
+ 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 -		"root=${mmcroot}\0" \
 -	"loadbootscript=" \
--		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+-		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 -	"bootscript=echo Running bootscript from mmc ...; " \
 -		"source\0" \
--	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
--	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+-	"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+-	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 -	"mmcboot=echo Booting from mmc ...; " \
 -		"run mmcargs; " \
 -		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 -			"if run loadfdt; then " \
 -				"bootz ${loadaddr} - ${fdt_addr}; " \
-+		"i2c dev 1; " \
-+		"if i2c probe 0x10; then " \
-+			"setenv bootargs ${bootargs} " \
-+				"video=mxcfb${nextcon}:dev=lcd,800x480@60," \
-+					"if=RGB666; " \
-+			"if test 0 -eq ${nextcon}; then " \
-+				"setenv fbmem fbmem=10M; " \
- 			"else " \
+-			"else " \
 -				"if test ${boot_fdt} = try; then " \
 -					"bootz; " \
 -				"else " \
 -					"echo WARN: Cannot load the DT; " \
 -				"fi; " \
-+				"setenv fbmem ${fbmem},10M; " \
- 			"fi; " \
-+			"setexpr nextcon ${nextcon} + 1; " \
- 		"else " \
--			"bootz; " \
-+			"echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
-+		"fi; " \
-+		"setenv bootargs ${bootargs} ${fbmem}\0" \
-+	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+	"loadrd=load mmc ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+	"loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
++		"${optargs} " \
++		"root=${mmcroot} " \
++		"video=${video}\0" \
++	"loadimage=echo Loading /boot/${image}..; load mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${image}\0" \
++	"loadfdt=echo Loading /boot/dtbs/${fdt_file}..; load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/dtbs/${fdt_file}\0" \
++	"loadrd=load mmc ${bootpart} ${rdaddr} /boot/${rdfile}\0" \
 +	"mmcboot=mmc dev ${mmcdev}; " \
 +		"if mmc rescan; then " \
 +			"echo SD/MMC found on device ${mmcdev};" \
@@ -345,14 +95,16 @@ index 700e9c1..7fdce0f 100644
 +					"echo Running uenvcmd ...;" \
 +					"run uenvcmd;" \
 +				"fi;" \
-+			"fi; " \
+ 			"fi; " \
+-		"else " \
+-			"bootz; " \
 +			"if run loadimage; then " \
 +				"if run loadfdt; then " \
 +					"run mmcargs;" \
 +					"if run loadrd; then " \
-+						"bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
++						"bootz ${loadaddr} ${rdaddr}:${filesize} ${fdt_addr};" \
 +					"else " \
-+						"bootz ${loadaddr} - ${fdtaddr};" \
++						"bootz ${loadaddr} - ${fdt_addr};" \
 +					"fi;" \
 +				"else " \
 +					"echo Kernel found, but no device tree found;" \
@@ -363,24 +115,27 @@ index 700e9c1..7fdce0f 100644
  		"fi;\0" \
  	"netargs=setenv bootargs console=${console},${baudrate} " \
  		"root=/dev/nfs " \
-@@ -161,10 +198,10 @@
+@@ -137,26 +141,17 @@
  		"else " \
- 			"setenv get_cmd tftp; " \
- 		"fi; " \
--		"${get_cmd} ${image}; " \
-+		"${get_cmd} ${bootfile}; " \
- 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
--			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
--				"bootz ${loadaddr} - ${fdt_addr}; " \
-+			"if ${get_cmd} ${fdtaddr} ${fdtfile}; then " \
-+				"bootz ${loadaddr} - ${fdtaddr}; " \
- 			"else " \
- 				"if test ${boot_fdt} = try; then " \
- 					"bootz; " \
-@@ -177,16 +214,7 @@
- 		"fi;\0"
+ 			"bootz; " \
+ 		"fi;\0" \
+-		"findfdt=" \
+-			"if test $board_rev = MX6Q ; then " \
+-				"setenv fdt_file imx6q-udoo.dtb; fi; " \
+-			"if test $board_rev = MX6DL ; then " \
+-				"setenv fdt_file imx6dl-udoo.dtb; fi; " \
+-			"if test $fdt_file = undefined; then " \
+-				"echo WARNING: Could not determine dtb to use; fi; \0"
++	"findfdt=" \
++		"if test $board_rev = MX6Q ; then " \
++			"setenv fdt_file imx6q-udoo.dtb; fi; " \
++		"if test $board_rev = MX6DL ; then " \
++			"setenv fdt_file imx6dl-udoo.dtb; fi; " \
++		"if test $fdt_file = undefined; then " \
++			"echo WARNING: Could not determine dtb to use; fi; \0"
  
  #define CONFIG_BOOTCOMMAND \
+ 	   "run findfdt; " \
 -	   "mmc dev ${mmcdev}; if mmc rescan; then " \
 -		   "if run loadbootscript; then " \
 -			   "run bootscript; " \
@@ -391,18 +146,10 @@ index 700e9c1..7fdce0f 100644
 -			   "fi; " \
 -		   "fi; " \
 -	   "else run netboot; fi"
-+	"run mmcboot;"
++	   "run mmcboot; "
  
- /* Miscellaneous configurable options */
- #define CONFIG_SYS_LONGHELP
-@@ -228,6 +256,7 @@
- 
- #define CONFIG_OF_LIBFDT
- #define CONFIG_CMD_BOOTZ
-+#define CONFIG_SUPPORT_RAW_INITRD
- 
- #ifndef CONFIG_SYS_DCACHE_OFF
- #define CONFIG_CMD_CACHE
+ /* Print Buffer Size */
+ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 -- 
-2.2.1
+2.10.0
 
diff --git a/alarm/uboot-udoo/PKGBUILD b/alarm/uboot-udoo/PKGBUILD
index 0f3d253d3..6fad7a607 100644
--- a/alarm/uboot-udoo/PKGBUILD
+++ b/alarm/uboot-udoo/PKGBUILD
@@ -3,53 +3,40 @@
 
 buildarch=4
 
-pkgbase=uboot-udoo
-pkgname=('uboot-udoo-dual' 'uboot-udoo-quad')
-pkgver=2015.01
+pkgname=uboot-udoo
+pkgver=2016.09
 pkgrel=1
+pkgdesc="U-Boot for UDOO Dual and Quad"
 arch=('armv7h')
 url="http://git.denx.de/u-boot.git/"
+makedepends=('bc' 'dtc' 'git')
+replaces=('uboot-udoo-dual' 'uboot-udoo-quad')
 license=('GPL')
-makedepends=('git' 'bc')
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
+install=${pkgname}.install
+source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver/rc/-rc}.tar.bz2"
         '0001-arch-linux-arm-modifications.patch')
-md5sums=('7f08dc9e98a71652bd6968888ed6ec95'
-         '85e269e9211ea5ed2d9ccc7bb8c8d5d7')
+md5sums=('2e69dda70eb28f8042d2f9fbeb1feaa1'
+         '6165211bb53ee947ce58a22828984b5e')
 
 prepare() {
-  cd u-boot-${pkgver}
+  cd u-boot-${pkgver/rc/-rc}
 
   git apply ../0001-arch-linux-arm-modifications.patch
 }
 
 build() {
-  cd u-boot-${pkgver}
+  cd u-boot-${pkgver/rc/-rc}
   
   unset CFLAGS CXXFLAGS LDFLAGS
   
-  mkdir bins
-  for i in dl quad; do
-    make distclean
-    make udoo_${i}_config
-    make
-    mv u-boot.imx bins/u-boot-${i}.imx
-  done
+  make distclean
+  make udoo_defconfig
+  make EXTRAVERSION=-${pkgrel}
 }
 
-package_uboot-udoo-dual() {
-  pkgdesc="U-Boot for UDOO Dual"
-  conflicts=('uboot-udoo-quad')
-  install=${pkgbase}.install
+package_uboot-udoo() {
+  cd u-boot-${pkgver/rc/-rc}
 
   mkdir -p "${pkgdir}"/boot
-  cp u-boot-${pkgver}/bins/u-boot-dl.imx "${pkgdir}"/boot/u-boot.imx
-}
-
-package_uboot-udoo-quad() {
-  pkgdesc="U-Boot for UDOO Quad"
-  conflicts=('uboot-udoo-dual')
-  install=${pkgbase}.install
-
-  mkdir -p "${pkgdir}"/boot
-  cp u-boot-${pkgver}/bins/u-boot-quad.imx "${pkgdir}"/boot/u-boot.imx
+  cp SPL u-boot.img "${pkgdir}"/boot
 }
diff --git a/alarm/uboot-udoo/uboot-udoo.install b/alarm/uboot-udoo/uboot-udoo.install
index c74dc9766..2f6348530 100644
--- a/alarm/uboot-udoo/uboot-udoo.install
+++ b/alarm/uboot-udoo/uboot-udoo.install
@@ -3,21 +3,20 @@ flash_uboot() {
   echo "Do you want to do this now? [y|N]"
   read -r shouldwe
   if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
-    dd if=/boot/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2
+    dd if=/boot/SPL of=/dev/mmcblk0 seek=1 bs=1k
+    dd if=/boot/u-boot.img of=/dev/mmcblk0 seek=69 bs=1k
     sync
   else
     echo "You can do this later by running:"
-    echo "# dd if=/boot/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2"
+    echo "# dd if=/boot/SPL of=/dev/mmcblk0 seek=1 bs=1k"
+    echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 seek=69 bs=1k"
   fi
 }
 
-## arg 1:  the new package version
 post_install() {
   flash_uboot
 }
 
-## arg 1:  the new package version
-## arg 2:  the old package version
 post_upgrade() {
   flash_uboot
 }