core/linux-am33x: include SPI userspace support for beaglebone headers, build in framebuffer support, remove unused ethernet modules

core/linux-am33x/ARM-omap-am33x-BeagleBone-userspace-SPI-support.patch

@@ -0,0 +1,51 @@
+--- arch.orig/arm/mach-omap2/board-am335xevm.c	2012-02-18 10:43:40.000000000 -0500
++++ arch/arm/mach-omap2/board-am335xevm.c	2012-02-18 10:43:29.000000000 -0500
+@@ -1518,6 +1518,16 @@
+ 	},
+ };
+ 
++static struct spi_board_info bone_am335x_slave_info[] = {
++       {
++               .modalias      = "spidev",
++               .irq           = -1,
++               .max_speed_hz  = 12000000,
++               .bus_num       = 2,
++               .chip_select   = 0,
++       },
++};
++
+ static void evm_nand_init(int evm_id, int profile)
+ {
+ 	setup_pin_mux(nand_pin_mux);
+@@ -2061,6 +2071,15 @@
+ 	return;
+ }
+ 
++/* setup beaglebone spi1 */
++static void bone_spi1_init(int evm_id, int profile)
++{
++       setup_pin_mux(spi1_pin_mux);
++       spi_register_board_info(bone_am335x_slave_info,
++                       ARRAY_SIZE(bone_am335x_slave_info));
++       return;
++}
++
+ 
+ static int beaglebone_phy_fixup(struct phy_device *phydev)
+ {
+@@ -2216,6 +2235,7 @@
+ 	{i2c2_init,	DEV_ON_BASEBOARD, PROFILE_NONE},
+ 	{mmc0_init,	DEV_ON_BASEBOARD, PROFILE_NONE},
+ 	{boneleds_init,	DEV_ON_BASEBOARD, PROFILE_ALL},
++	{bone_spi1_init, DEV_ON_BASEBOARD, PROFILE_NONE},
+ 	{NULL, 0, 0},
+ };
+ 
+@@ -2228,6 +2248,7 @@
+ 	{i2c2_init,	DEV_ON_BASEBOARD, PROFILE_NONE},
+ 	{mmc0_init,	DEV_ON_BASEBOARD, PROFILE_NONE},
+ 	{boneleds_init,	DEV_ON_BASEBOARD, PROFILE_ALL},
++	{bone_spi1_init, DEV_ON_BASEBOARD, PROFILE_NONE},
+ 	{NULL, 0, 0},
+ };
+

core/linux-am33x/PKGBUILD

@@ -12,16 +12,19 @@ pkgname=('linux-am33x' 'linux-headers-am33x')
 _kernelname=${pkgname#linux}
 _basekernel="am33x"
 pkgver=3.2
-pkgrel=alarm2
+pkgrel=alarm3
 arch=('armv7h')
 url="http://www.kernel.org/"
 license=('GPL2')
 makedepends=('xmlto' 'docbook-xsl' 'uboot-mkimage' 'git')
 options=('!strip')
 source=( "config"
-	"https://github.com/koenkooi/linux/zipball/beaglebone-3.2")
+	"https://github.com/koenkooi/linux/zipball/beaglebone-3.2"
-md5sums=('e68d149a9262bdd985f99a470f6fc903'
+	"ARM-omap-am33x-BeagleBone-userspace-SPI-support.patch")
-         '82e2e714e34cfc6ddbfc628cdc7a4b1e')
+md5sums=('aaa1ddae7405b431948942d5b67c3869'
+         '82e2e714e34cfc6ddbfc628cdc7a4b1e'
+         '9d3e650dba24c16b6fa62c5ce0669d09')
+
 
 
 build() {
@@ -34,6 +37,8 @@ build() {
 
 	cd $srcdir/linux  
 	
+	patch -Np0 -i "${srcdir}/ARM-omap-am33x-BeagleBone-userspace-SPI-support.patch"
+
 	make prepare
 
 	make ${MAKEFLAGS} uImage modules
@@ -188,3 +193,51 @@ package_linux-headers-am33x() {
   rm -rf "${pkgdir}"/usr/src/linux-${_kernver}/arch/{alpha,arm26,avr32,blackfin,cris,frv,h8300,ia64,m32r,m68k,m68knommu,mips,microblaze,mn10300,parisc,powerpc,ppc,s390,sh,sh64,sparc,sparc64,um,v850,x86,xtensa}
 }
 
+md5sums=('8c5ed69028a0940fc0e34ae83e4e0b9a'
+         '82e2e714e34cfc6ddbfc628cdc7a4b1e'
+         '9d7de2020d65428e20de731a80e010cf')
+md5sums=('8c5ed69028a0940fc0e34ae83e4e0b9a'
+         '82e2e714e34cfc6ddbfc628cdc7a4b1e'
+         '29079b6aceaf679167dfd7723da2ecf2')
+md5sums=('8c5ed69028a0940fc0e34ae83e4e0b9a'
+         '82e2e714e34cfc6ddbfc628cdc7a4b1e'
+         'd74cfdb0db143a5262d483314cfd8095')
+md5sums=('8c5ed69028a0940fc0e34ae83e4e0b9a'
+         '82e2e714e34cfc6ddbfc628cdc7a4b1e'
+         '3d28f52fd1270a4f09081fcc2b94ac82')
+md5sums=('8c5ed69028a0940fc0e34ae83e4e0b9a'
+         '82e2e714e34cfc6ddbfc628cdc7a4b1e'
+         '0ffe80b6348788cbaec66c5c74603383')
+md5sums=('8c5ed69028a0940fc0e34ae83e4e0b9a'
+         '82e2e714e34cfc6ddbfc628cdc7a4b1e'
+         '2aabc1d6bee3fe7065bb3ae42b4a80b2')
+md5sums=('8c5ed69028a0940fc0e34ae83e4e0b9a'
+         '82e2e714e34cfc6ddbfc628cdc7a4b1e'
+         'e930c237d3a1fcf7980c5f90a1d9b101')
+md5sums=('8c5ed69028a0940fc0e34ae83e4e0b9a'
+         '82e2e714e34cfc6ddbfc628cdc7a4b1e'
+         'e930c237d3a1fcf7980c5f90a1d9b101')
+md5sums=('8c5ed69028a0940fc0e34ae83e4e0b9a'
+         '82e2e714e34cfc6ddbfc628cdc7a4b1e'
+         'd439794edf6c3959d1af35936d85daf6')
+md5sums=('8c5ed69028a0940fc0e34ae83e4e0b9a'
+         '82e2e714e34cfc6ddbfc628cdc7a4b1e'
+         '432ce5b07ca7543ad3aed5776b46c21d')
+md5sums=('8c5ed69028a0940fc0e34ae83e4e0b9a'
+         '82e2e714e34cfc6ddbfc628cdc7a4b1e'
+         '432ce5b07ca7543ad3aed5776b46c21d')
+md5sums=('8c5ed69028a0940fc0e34ae83e4e0b9a'
+         '82e2e714e34cfc6ddbfc628cdc7a4b1e'
+         '72a3f68d7adf184a9334d730c8f7cb04')
+md5sums=('8c5ed69028a0940fc0e34ae83e4e0b9a'
+         '82e2e714e34cfc6ddbfc628cdc7a4b1e'
+         '72a3f68d7adf184a9334d730c8f7cb04')
+md5sums=('8c5ed69028a0940fc0e34ae83e4e0b9a'
+         '82e2e714e34cfc6ddbfc628cdc7a4b1e'
+         '2cdaa0146ca61e917ad8e30f4aada1bd')
+md5sums=('1b14c9b76364e84a23ccfa03ac1022dc'
+         '82e2e714e34cfc6ddbfc628cdc7a4b1e'
+         '18f543164ad6a73c87ee599b961c201d')
+md5sums=('a233566f6240421ad31c01e47140e39b'
+         '82e2e714e34cfc6ddbfc628cdc7a4b1e'
+         '18f543164ad6a73c87ee599b961c201d')

core/linux-am33x/config

@@ -35,7 +35,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-alarm3"
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_LZMA=y
@@ -138,6 +138,7 @@ CONFIG_HAVE_DMA_API_DEBUG=y
 #
 # GCOV-based kernel profiling
 #
+# CONFIG_GCOV_KERNEL is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -1030,35 +1031,24 @@ CONFIG_MII=y
 # CAIF transport drivers
 #
 CONFIG_ETHERNET=y
-CONFIG_NET_VENDOR_BROADCOM=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_B44 is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
-CONFIG_NET_VENDOR_CHELSIO=y
 # CONFIG_DM9000 is not set
 # CONFIG_DNET is not set
-CONFIG_NET_VENDOR_FARADAY=y
+# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_FTMAC100 is not set
+# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_FTGMAC100 is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
-CONFIG_NET_VENDOR_INTEL=y
+# CONFIG_NET_VENDOR_MICREL is not set
-CONFIG_NET_VENDOR_I825XX=y
+# CONFIG_NET_VENDOR_MICROCHIP is not set
-CONFIG_NET_VENDOR_MARVELL=y
+# CONFIG_NET_VENDOR_NATSEMI is not set
-CONFIG_NET_VENDOR_MICREL=y
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NET_VENDOR_MICROCHIP=y
-# CONFIG_ENC28J60 is not set
-CONFIG_NET_VENDOR_NATSEMI=y
-CONFIG_NET_VENDOR_8390=y
-# CONFIG_AX88796 is not set
 # CONFIG_ETHOC is not set
-CONFIG_NET_VENDOR_SEEQ=y
+# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_SEEQ8005 is not set
 CONFIG_NET_VENDOR_SMSC=y
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
 # CONFIG_SMSC911X_ARCH_HOOKS is not set
-CONFIG_NET_VENDOR_STMICRO=y
+# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_STMMAC_ETH is not set
 CONFIG_NET_VENDOR_TI=y
 # CONFIG_TI_DAVINCI_EMAC is not set
 CONFIG_TI_DAVINCI_MDIO=y
@@ -1121,7 +1111,7 @@ CONFIG_USB_NET_CDC_SUBSET=y
 # CONFIG_USB_NET_KALMIA is not set
 # CONFIG_USB_HSO is not set
 # CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_IPHETH is not set
+CONFIG_USB_IPHETH=m
 # CONFIG_USB_SIERRA_NET is not set
 # CONFIG_USB_VL600 is not set
 CONFIG_WLAN=y
@@ -1631,19 +1621,22 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_DRM=m
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=m
+CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_IMAGEBLIT=m
+CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_BOTH_ENDIAN=y
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
 # CONFIG_FB_WMT_GE_ROPS is not set
 CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
@@ -1656,16 +1649,43 @@ CONFIG_FB_TILEBLITTING=y
 # Frame buffer hardware drivers
 #
 # CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_SMSCUFX is not set
+CONFIG_FB_SMSCUFX=m
 CONFIG_FB_UDL=m
 CONFIG_FB_DA8XX=m
 CONFIG_FB_DA8XX_CONSISTENT_DMA_SIZE=4
-# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_VIRTUAL=m
-# CONFIG_FB_METRONOME is not set
+CONFIG_FB_METRONOME=m
-# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_BROADSHEET=m
-CONFIG_FB_ST7735=m
+CONFIG_FB_ST7735=y
-# CONFIG_FB_OMAP is not set
+CONFIG_FB_OMAP_BOOTLOADER_INIT=y
-# CONFIG_OMAP2_DSS is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=m
+CONFIG_OMAP2_VRAM_SIZE=0
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
+CONFIG_OMAP2_DSS_DPI=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+# CONFIG_OMAP2_DSS_SDI is not set
+# CONFIG_OMAP2_DSS_DSI is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
+CONFIG_FB_OMAP2=m
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC_DPI=m
+CONFIG_PANEL_DVI=m
+CONFIG_PANEL_LGPHILIPS_LB035Q02=m
+CONFIG_PANEL_SHARP_LS037V7DW01=m
+CONFIG_PANEL_NEC_NL8048HL11_01B=m
+CONFIG_PANEL_PICODLP=m
+CONFIG_PANEL_TPO_TD043MTEA1=m
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_LCD_L4F00242T03 is not set
@@ -1696,7 +1716,7 @@ CONFIG_DISPLAY_SUPPORT=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
@@ -1949,6 +1969,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_YUREX is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
 CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
 # CONFIG_USB_FUSB300 is not set
@@ -2164,7 +2185,9 @@ CONFIG_EXT4_FS_XATTR=y
 CONFIG_EXT4_FS_SECURITY=y
 # CONFIG_EXT4_DEBUG is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -2360,15 +2383,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_HARDLOCKUP_DETECTOR is not set
 # CONFIG_SPARSE_RCU_POINTER is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_FRAME_POINTER=y
+# CONFIG_LKDTM is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -2379,6 +2403,7 @@ CONFIG_RING_BUFFER=y
 CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_ATOMIC64_SELFTEST is not set
 # CONFIG_SAMPLES is not set
@@ -2462,13 +2487,13 @@ CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_CRC32C=y
 # CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 # CONFIG_CRYPTO_RMD128 is not set
 # CONFIG_CRYPTO_RMD160 is not set
 # CONFIG_CRYPTO_RMD256 is not set
 # CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
+CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
@@ -2506,7 +2531,9 @@ CONFIG_CRYPTO_LZO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_USER_API_HASH is not set
 # CONFIG_CRYPTO_USER_API_SKCIPHER is not set
-# CONFIG_CRYPTO_HW is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_OMAP_SHAM=y
+CONFIG_CRYPTO_DEV_OMAP_AES=y
 # CONFIG_BINARY_PRINTF is not set
 
 #

core/linux-am33x/linux-am33x.install

@@ -2,7 +2,7 @@
 # arg 2:  the old package version
 
 KERNEL_NAME=-am33x
-KERNEL_VERSION=3.2.0
+KERNEL_VERSION=3.2.0alarm3
 
 post_install () {
   # updating module dependencies