diff --git a/core/kernel26/GoFlex-Home.patch b/core/kernel26/GoFlex-Home.patch
new file mode 100644
index 000000000..d6466361a
--- /dev/null
+++ b/core/kernel26/GoFlex-Home.patch
@@ -0,0 +1,175 @@
+From 9b63dc5b3e497c917c4afed15d8425aa413784e1 Mon Sep 17 00:00:00 2001
+From: Peter Carmichael <peterjncarm@ovi.com>
+Date: Mon, 7 Feb 2011 00:40:17 +0000
+Subject: [PATCH] Support for GoFlex Home under its own ID
+
+---
+ arch/arm/mach-kirkwood/Kconfig            |    6 ++
+ arch/arm/mach-kirkwood/Makefile           |    1 +
+ arch/arm/mach-kirkwood/goflexhome-setup.c |  115 +++++++++++++++++++++++++++++
+ arch/arm/tools/mach-types                 |    1 +
+ 4 files changed, 123 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/mach-kirkwood/goflexhome-setup.c
+
+diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
+index f17c5d8..dc3cc54 100644
+--- a/arch/arm/mach-kirkwood/Kconfig
++++ b/arch/arm/mach-kirkwood/Kconfig
+@@ -70,6 +70,12 @@ config MACH_GOFLEXNET
+           Say 'Y' here if you want your kernel to support the
+           Seagate GoFlex Net.
+ 
++config MACH_GOFLEXHOME
++        bool "Seagate GoFlex Home"
++        help
++          Say 'Y' here if you want your kernel to support the
++          Seagate GoFlex Home.
++
+ config MACH_OPENRD
+         bool
+ 
+diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
+index 1a15f9f..48951cb 100644
+--- a/arch/arm/mach-kirkwood/Makefile
++++ b/arch/arm/mach-kirkwood/Makefile
+@@ -9,6 +9,7 @@ obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
+ obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
+ obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
+ obj-$(CONFIG_MACH_GOFLEXNET)		+= goflexnet-setup.o
++obj-$(CONFIG_MACH_GOFLEXHOME)		+= goflexhome-setup.o
+ obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
+ obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
+ obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
+diff --git a/arch/arm/mach-kirkwood/goflexhome-setup.c b/arch/arm/mach-kirkwood/goflexhome-setup.c
+new file mode 100644
+index 0000000..54fe8e3
+--- /dev/null
++++ b/arch/arm/mach-kirkwood/goflexhome-setup.c
+@@ -0,0 +1,115 @@
++/*
++ * arch/arm/mach-kirkwood/goflexhome-setup.c
++ *
++ * Seagate GoFlex Home Setup
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/ata_platform.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mv643xx_eth.h>
++#include <linux/gpio.h>
++#include <linux/leds.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <mach/kirkwood.h>
++#include "common.h"
++#include "mpp.h"
++
++static struct mtd_partition goflexhome_nand_parts[] = {
++	{
++		.name = "u-boot",
++		.offset = 0,
++		.size = SZ_1M
++	}, {
++		.name = "uImage",
++		.offset = MTDPART_OFS_NXTBLK,
++		.size = SZ_2M + SZ_4M
++	}, {
++		.name = "root",
++		.offset = MTDPART_OFS_NXTBLK,
++		.size = MTDPART_SIZ_FULL
++	},
++};
++
++static struct mv643xx_eth_platform_data goflexhome_ge00_data = {
++	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
++};
++
++static struct mv_sata_platform_data goflexhome_sata_data = {
++	.n_ports	= 1,
++};
++
++static struct gpio_led goflexhome_led_pins[] = {
++	{
++		.name			= "status:green:health",
++		.default_trigger	= "default-on",
++		.gpio			= 46,
++		.active_low		= 1,
++	},
++	{
++		.name			= "status:orange:fault",
++		.default_trigger	= "none",
++		.gpio			= 47,
++		.active_low		= 1,
++	}
++};
++
++static struct gpio_led_platform_data goflexhome_led_data = {
++	.leds		= goflexhome_led_pins,
++	.num_leds	= ARRAY_SIZE(goflexhome_led_pins),
++};
++
++static struct platform_device goflexhome_leds = {
++	.name	= "leds-gpio",
++	.id	= -1,
++	.dev	= {
++		.platform_data	= &goflexhome_led_data,
++	}
++};
++
++static unsigned int goflexhome_mpp_config[] __initdata = {
++	MPP29_GPIO,	/* USB Power Enable */
++	MPP47_GPIO,	/* LED Orange */
++	MPP46_GPIO,	/* LED Green */
++	0
++};
++
++static void __init goflexhome_init(void)
++{
++	/*
++	 * Basic setup. Needs to be called early.
++	 */
++	kirkwood_init();
++
++	/* setup gpio pin select */
++	kirkwood_mpp_conf(goflexhome_mpp_config);
++
++	kirkwood_uart0_init();
++	kirkwood_nand_init(ARRAY_AND_SIZE(goflexhome_nand_parts), 25);
++
++	if (gpio_request(29, "USB Power Enable") != 0 ||
++	    gpio_direction_output(29, 1) != 0)
++		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
++	kirkwood_ehci_init();
++	kirkwood_ge00_init(&goflexhome_ge00_data);
++	kirkwood_sata_init(&goflexhome_sata_data);
++
++	platform_device_register(&goflexhome_leds);
++}
++
++MACHINE_START(GOFLEXHOME, "Seagate GoFlex Home")
++	/* Maintainer: Peter Carmichael <peterjncarm@ovi.com> */
++	.boot_params	= 0x00000100,
++	.init_machine	= goflexhome_init,
++	.map_io		= kirkwood_map_io,
++	.init_irq	= kirkwood_init_irq,
++	.timer		= &kirkwood_timer,
++MACHINE_END
++
+diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
+index 2fea897..8f68f5b 100644
+--- a/arch/arm/tools/mach-types
++++ b/arch/arm/tools/mach-types
+@@ -3219,3 +3219,4 @@ pivicc			MACH_PIVICC		PIVICC			3235
+ pcm048			MACH_PCM048		PCM048			3236
+ dds			MACH_DDS		DDS			3237
+ chalten_xa1		MACH_CHALTEN_XA1	CHALTEN_XA1		3238
++goflexhome		MACH_GOFLEXHOME 	GOFLEXHOME		3338
+-- 
+1.5.6.5
+