core/linux-armv7-rc to 4.19.rc5-1

core/linux-armv7-rc/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch

@@ -1,7 +1,7 @@
-From 6ea8686dc9fe35d8eb0db8377948f878bb5f197e Mon Sep 17 00:00:00 2001
+From 3fe3d31dfe86c2c36fe3dbf318b62c17dad74979 Mon Sep 17 00:00:00 2001
 From: Willy Tarreau <w@xxxxxx>
 Date: Sun, 2 Dec 2012 19:59:28 +0100
-Subject: [PATCH 01/13] ARM: atags: add support for Marvell's u-boot
+Subject: [PATCH 01/14] ARM: atags: add support for Marvell's u-boot
 
 Marvell uses a specific atag in its u-boot which includes among other
 information the MAC addresses for up to 4 network interfaces.
@@ -47,5 +47,5 @@ index 6b335a9ff8c8..614150b53643 100644
  };
  
 -- 
-2.18.0
+2.19.0
 

core/linux-armv7-rc/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch

@@ -1,7 +1,7 @@
-From 0b2a95fb47a6cae403fb6e7d8b46dbe30d803cf9 Mon Sep 17 00:00:00 2001
+From 0318a0c7a4f28fea65ece490b8e5ab999ea28cf0 Mon Sep 17 00:00:00 2001
 From: Willy Tarreau <w@xxxxxx>
 Date: Sun, 2 Dec 2012 19:56:58 +0100
-Subject: [PATCH 02/13] ARM: atags/fdt: retrieve MAC addresses from Marvell
+Subject: [PATCH 02/14] ARM: atags/fdt: retrieve MAC addresses from Marvell
  boot loader
 
 The atags are parsed and if a Marvell atag is found, up to 4 MAC
@@ -43,5 +43,5 @@ index 41fa7316c52b..807ed160a4b9 100644
  	}
  
 -- 
-2.18.0
+2.19.0
 

core/linux-armv7-rc/0003-SMILE-Plug-device-tree-file.patch

@@ -1,7 +1,7 @@
-From 8381475130812e6b31cf700edee0388b0167a988 Mon Sep 17 00:00:00 2001
+From aeb39caae840357c6f8746f7b357db39e289dfb0 Mon Sep 17 00:00:00 2001
 From: Kevin Mihelich <kevin@archlinuxarm.org>
 Date: Fri, 5 Sep 2014 15:41:19 -0600
-Subject: [PATCH 03/13] SMILE Plug device tree file
+Subject: [PATCH 03/14] SMILE Plug device tree file
 
 This adds a dts file for the SMILE Plug, which only differs from the Mirabox
 dts with the LED definitions.
@@ -205,5 +205,5 @@ index 000000000000..d01308ab848b
 +	};
 +};
 -- 
-2.18.0
+2.19.0
 

core/linux-armv7-rc/0004-fix-mvsdio-eMMC-timing.patch

@@ -1,7 +1,7 @@
-From abf76b3e15bc0a6e777cf7ed908fdeb586513dd2 Mon Sep 17 00:00:00 2001
+From 91fb157f637a63b837bb561de7c5e8e82a0742b7 Mon Sep 17 00:00:00 2001
 From: Kevin Mihelich <kevin@archlinuxarm.org>
 Date: Fri, 5 Sep 2014 15:43:56 -0600
-Subject: [PATCH 04/13] fix mvsdio eMMC timing
+Subject: [PATCH 04/14] fix mvsdio eMMC timing
 
 These changes from Globalscale change the MMC timing to allow the eMMC versions
 of the Mirabox and SMILE Plug to work.
@@ -34,5 +34,5 @@ index e22bbff89c8d..6b30c850ce07 100644
  		host->clock = ios->clock;
  		host->ns_per_clk = 1000000000 / (host->base_clock / (m+1));
 -- 
-2.18.0
+2.19.0
 

core/linux-armv7-rc/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch

@@ -1,7 +1,7 @@
-From 96b1b9a89f1418da53e482296fbe8b6d188bdaac Mon Sep 17 00:00:00 2001
+From 7b672000c60cd27290cf40aa35465c36ddac377e Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Tue, 18 Feb 2014 01:43:50 -0300
-Subject: [PATCH 05/13] net/smsc95xx: Allow mac address to be set as a
+Subject: [PATCH 05/14] net/smsc95xx: Allow mac address to be set as a
  parameter
 
 ---
@@ -92,5 +92,5 @@ index 06b4d290784d..3be3b5a4a176 100644
  
  	/* maybe the boot loader passed the MAC address in devicetree */
 -- 
-2.18.0
+2.19.0
 

core/linux-armv7-rc/0006-set-default-cubietruck-led-triggers.patch

@@ -1,7 +1,7 @@
-From 1160370454aa52b104daf90f268ed60272c854ab Mon Sep 17 00:00:00 2001
+From 9554ee43557caf3307c4d02363edad337b57183b Mon Sep 17 00:00:00 2001
 From: Kevin Mihelich <kevin@archlinuxarm.org>
 Date: Sat, 14 Feb 2015 12:32:27 +0100
-Subject: [PATCH 06/13] set default cubietruck led triggers
+Subject: [PATCH 06/14] set default cubietruck led triggers
 
 Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
 ---
@@ -29,5 +29,5 @@ index 5649161de1d7..2be64a886555 100644
  	};
  
 -- 
-2.18.0
+2.19.0
 

core/linux-armv7-rc/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch

@@ -1,7 +1,7 @@
-From 572a7b93f66d79062d93e7c6fd28ddf140a1c14c Mon Sep 17 00:00:00 2001
+From f25e2b18b4773c9419f2308d16e8d119384ac3cf Mon Sep 17 00:00:00 2001
 From: Kevin Mihelich <kevin@archlinuxarm.org>
 Date: Thu, 11 Aug 2016 00:42:37 -0600
-Subject: [PATCH 07/13] exynos4412-odroid: set higher minimum buck2 regulator
+Subject: [PATCH 07/14] exynos4412-odroid: set higher minimum buck2 regulator
  voltage
 
 Set a higher minimum voltage to help reboot issue.
@@ -26,5 +26,5 @@ index a09e46c9dbc0..d8117a820812 100644
  				regulator-always-on;
  				regulator-boot-on;
 -- 
-2.18.0
+2.19.0
 

core/linux-armv7-rc/0008-ARM-dove-enable-ethernet-on-D3Plug.patch

@@ -1,7 +1,7 @@
-From 46ca7d062b22205db04f07e947d3349552f1bcd7 Mon Sep 17 00:00:00 2001
+From e1ab434c1ed6331c1bf91060053a48929bfb2f63 Mon Sep 17 00:00:00 2001
 From: Kevin Mihelich <kevin@archlinuxarm.org>
 Date: Sun, 7 May 2017 13:32:25 -0600
-Subject: [PATCH 08/13] ARM: dove: enable ethernet on D3Plug
+Subject: [PATCH 08/14] ARM: dove: enable ethernet on D3Plug
 
 Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
 ---
@@ -27,5 +27,5 @@ index 826026c28f90..a4c9963e1261 100644
  /* Samsung M8G2F eMMC */
  &sdio0 {
 -- 
-2.18.0
+2.19.0
 

core/linux-armv7-rc/0009-power-add-power-sequence-library.patch

@@ -1,7 +1,7 @@
-From a87c1bebbd061ee80fb1b979c2e257a742bc6a83 Mon Sep 17 00:00:00 2001
+From 95b35165973f831017aad76240a29f9e3cc7bedd Mon Sep 17 00:00:00 2001
 From: Peter Chen <peter.chen@nxp.com>
 Date: Wed, 21 Jun 2017 14:42:03 +0800
-Subject: [PATCH 09/13] power: add power sequence library
+Subject: [PATCH 09/14] power: add power sequence library
 
 We have an well-known problem that the device needs to do some power
 sequence before it can be recognized by related host, the typical
@@ -109,10 +109,10 @@ index 000000000000..554608e5f3b6
 +.. kernel-doc:: drivers/power/pwrseq/core.c
 +   :export:
 diff --git a/MAINTAINERS b/MAINTAINERS
-index a5b256b25905..61f64089db76 100644
+index 02a39617ec82..5b42de98ef9d 100644
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -11605,6 +11605,15 @@ F:	drivers/firmware/psci*.c
+@@ -11622,6 +11622,15 @@ F:	drivers/firmware/psci*.c
  F:	include/linux/psci.h
  F:	include/uapi/linux/psci.h
  
@@ -786,5 +786,5 @@ index 000000000000..c5b278f5f2ae
 +
 +#endif  /* __LINUX_PWRSEQ_H */
 -- 
-2.18.0
+2.19.0
 

core/linux-armv7-rc/0010-usb-core-add-power-sequence-handling-for-USB-devices.patch

@@ -1,7 +1,7 @@
-From fce0a6cc938622413cf166231fde1beb586acf3e Mon Sep 17 00:00:00 2001
+From cdc5187421ccf419dc0effb8dbaffb6eb1964174 Mon Sep 17 00:00:00 2001
 From: Peter Chen <peter.chen@nxp.com>
 Date: Wed, 21 Jun 2017 14:42:05 +0800
-Subject: [PATCH 10/13] usb: core: add power sequence handling for USB devices
+Subject: [PATCH 10/14] usb: core: add power sequence handling for USB devices
 
 Some hard-wired USB devices need to do power sequence to let the
 device work normally, the typical power sequence like: enable USB
@@ -162,5 +162,5 @@ index 4accfb63f7dc..abe71c5e84cb 100644
  
  /**
 -- 
-2.18.0
+2.19.0
 

core/linux-armv7-rc/0011-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch

@@ -1,7 +1,7 @@
-From 84920ea6544dd79a0d5fd1cdb2ee54e91bc657c4 Mon Sep 17 00:00:00 2001
+From 94f4eacc527eb42f8601680b98ff5ee82eaa31e5 Mon Sep 17 00:00:00 2001
 From: Joshua Clayton <stillcompiling@gmail.com>
 Date: Wed, 21 Jun 2017 14:42:06 +0800
-Subject: [PATCH 11/13] ARM: dts: imx6qdl: Enable usb node children with <reg>
+Subject: [PATCH 11/14] ARM: dts: imx6qdl: Enable usb node children with <reg>
 
 Give usb nodes #address and #size attributes, so that a child node
 representing a permanently connected device such as an onboard hub may
@@ -45,5 +45,5 @@ index 61d2d26afbf4..bb67b1e6bc91 100644
  				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
  				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 -- 
-2.18.0
+2.19.0
 

core/linux-armv7-rc/0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch

@@ -1,7 +1,7 @@
-From 6dc233c33d2fd13deea2ff6f469a941f65ed9bcf Mon Sep 17 00:00:00 2001
+From 19ac8e8f7c88d8e622f7eb6195b82bf3dd5c4558 Mon Sep 17 00:00:00 2001
 From: Peter Chen <peter.chen@nxp.com>
 Date: Wed, 21 Jun 2017 14:42:07 +0800
-Subject: [PATCH 12/13] ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB
+Subject: [PATCH 12/14] ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB
  property
 
 The current dts describes USB HUB's property at USB controller's
@@ -76,5 +76,5 @@ index 4f27861bbb32..dead14b0d4bf 100644
  
  &usdhc3 {
 -- 
-2.18.0
+2.19.0
 

core/linux-armv7-rc/0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch

@@ -1,7 +1,7 @@
-From 3c8593ae4e13a0eff55883dc4e2d99044050ca23 Mon Sep 17 00:00:00 2001
+From 1493af9612c94615a73c09a75f2bfaeabb2df0f0 Mon Sep 17 00:00:00 2001
 From: Joshua Clayton <stillcompiling@gmail.com>
 Date: Wed, 21 Jun 2017 14:42:08 +0800
-Subject: [PATCH 13/13] ARM: dts: imx6q-evi: Fix onboard hub reset line
+Subject: [PATCH 13/14] ARM: dts: imx6q-evi: Fix onboard hub reset line
 
 Previously the onboard hub was made to work by treating its
 reset gpio as a regulator enable.
@@ -70,5 +70,5 @@ index fcd257bc5ac3..d32fa81bba95 100644
  		>;
  	};
 -- 
-2.18.0
+2.19.0
 

core/linux-armv7-rc/0014-usb-dwc2-disable-power_down-on-rockchip-devices.patch

@@ -0,0 +1,44 @@
+From b3da2b98cf8ebab28279669f5cfab83b505b918f Mon Sep 17 00:00:00 2001
+From: Hal Emmerich <hal@halemmerich.com>
+Date: Thu, 19 Jul 2018 21:48:08 -0500
+Subject: [PATCH 14/14] usb: dwc2: disable power_down on rockchip devices
+
+ The bug would let the usb controller enter partial power down,
+ which was formally known as hibernate, upon boot if nothing was plugged
+ in to the port. Partial power down couldn't be exited properly, so any
+ usb devices plugged in after boot would not be usable.
+
+ Before the name change, params.hibernation was false by default, so
+ _dwc2_hcd_suspend() would skip entering hibernation. With the
+ rename, _dwc2_hcd_suspend() was changed to use  params.power_down
+ to decide whether or not to enter partial power down.
+
+ Since params.power_down is non-zero by default, it needs to be set
+ to 0 for rockchip devices to restore functionality.
+
+ This bug was reported in the linux-usb thread:
+ REGRESSION: usb: dwc2: USB device not seen after boot
+
+ The commit that caused this regression is:
+ 6d23ee9caa6790aea047f9aca7f3c03cb8d96eb6
+
+Signed-off-by: Hal Emmerich <hal@halemmerich.com>
+---
+ drivers/usb/dwc2/params.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
+index bf7052e037d6..09292dc977e4 100644
+--- a/drivers/usb/dwc2/params.c
++++ b/drivers/usb/dwc2/params.c
+@@ -81,6 +81,7 @@ static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg)
+ 	p->host_perio_tx_fifo_size = 256;
+ 	p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
+ 		GAHBCFG_HBSTLEN_SHIFT;
++	p->power_down = 0;
+ }
+ 
+ static void dwc2_set_ltq_params(struct dwc2_hsotg *hsotg)
+-- 
+2.19.0
+

core/linux-armv7-rc/PKGBUILD

@@ -4,7 +4,7 @@
 buildarch=4
 
 _rcver=4.19
-_rcrel=4
+_rcrel=5
 _rcnrel=armv7-x1
 
 pkgbase=linux-armv7-rc
@@ -33,27 +33,29 @@ source=("https://git.kernel.org/torvalds/t/${_srcname}.tar.gz"
         '0011-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch'
         '0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch'
         '0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch'
+        '0014-usb-dwc2-disable-power_down-on-rockchip-devices.patch'
         'config'
         'kernel.its'
         'kernel.keyblock'
         'kernel_data_key.vbprivk'
         'linux.preset'
         '99-linux.hook')
-md5sums=('9ec996e158431e07b6a0da072a7b636c'
+md5sums=('5a3109e96d992abf0771de7327a412b5'
-         '5b9c39e069e4ded0bd65fbe8c8a35297'
+         'b83ff4d0bb7b9bcb52bbec06a38504b4'
-         'e006cc9c6c38207cee7c8e7a7344d445'
+         'b12466afb3d0b5265e4f3eb286197be7'
-         'fb0b2320b6303eec8018eedb5f18697b'
+         '256bbae12b94f732f69cca9297ff96de'
-         '1d2f258cde46197de614583998caecc8'
+         '3b1720b2334c4efb16e0da002734a00e'
-         '245dba8b6a1e7982b8213a448b77facf'
+         '7ccb756e46aa9a61a2ffdf0549f0edc3'
-         '2a4918f32075b69b790ddf3ccc026a27'
+         'fcbf4fef50ca6cbd2b360a3603cde764'
-         '5b9bd510403b18f5441d972e2e3cb12a'
+         '6f5d1259ca3c23ed24c8c23f7a9af93f'
-         '9a4c64547f4a928cf7a6eff34140eb00'
+         'fc30a0f23a9f185baf3bd02cb55609b4'
-         '41ca0b9b3b51c96c5d7c664ffdf801e2'
+         '4169c9ea2f1f0511fd242df1021fadfc'
-         '151a35f6362e0ba0b2302817a6f8d780'
+         '2028de0c679e6926a311d6805d767824'
-         'a1cb2662e0d0478bf3d89666912e9408'
+         'f868d4a5d828f56e018a7c28256081bd'
-         'cf42944b8f43808da0169ceb527a62ce'
+         '1d400b52890fb0d08911e4a4b25bfec5'
-         '34cb78e69877d11c4d6de608b9224b18'
+         '18ebf11f2ad87660c62eea3c49258efa'
-         'aa9f3877d2b523bffa06ec337bb823e4'
+         'c7652c4ef9ef6f5204cff75ee2304ad8'
+         'd90174a3bcbf777d907413b92b7ad1b6'
          'e919f9d0b5184bb61e2dc405efb4bac5'
          '4f2379ed84258050edb858ee8d281678'
          '61c5ff73c136ed07a7aadbf58db3d96a'
@@ -82,6 +84,7 @@ prepare() {
   git apply ../0011-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch
   git apply ../0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch
   git apply ../0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch
+  git apply ../0014-usb-dwc2-disable-power_down-on-rockchip-devices.patch
 
   cat "${srcdir}/config" > ./.config