diff --git a/aur/freeswitch-git/ChangeLog b/aur/freeswitch-git/ChangeLog deleted file mode 100644 index 987279aa5..000000000 --- a/aur/freeswitch-git/ChangeLog +++ /dev/null @@ -1,33 +0,0 @@ -2010-11-15 TJ Vanderpoel - - * 20101126-8 : - Added /var/spool/freeswitch/storage - -2010-10-26 TJ Vanderpoel - - * 20101026-7 : - Changed handling of configuration so that it - will not be overwritten on upgrades - - * 20101026-5 : - Removed libtool files from lib dirs - Moved primary --prefix to /var/lib/freeswitch - More symlinks to get the mod/*.so files into - /usr/lib/freeswitch where namcap wants them. - - * 20101026-4 : - Got rid of empty vars in PKGBUILD - - * 20101026-3 : - Moved ChangeLog to changelog= and out of the sources - array. - Using $srcdir instead of $startdir for install commands - - * 20101026-2 : - Added README and /usr/share/doc/freeswitch files - - * 20101026-1 : - added ChangeLog. - Tidied up the /etc/rc.d/freeswitch script and added - the 'fgstart' option to start under a supervisor such - as runit or daemontools. diff --git a/aur/freeswitch-git/PKGBUILD b/aur/freeswitch-git/PKGBUILD deleted file mode 100644 index 22e02d154..000000000 --- a/aur/freeswitch-git/PKGBUILD +++ /dev/null @@ -1,216 +0,0 @@ -plugrel=1 - -# This builds the FreeSWITCH open source telephone engine -# from the freeswitch git. It enables the following modules -# not enabled in the standard freeswitch build: -# * mod_callcenter -# * mod_xml_curl -# And disables the following standard modules: -# * mod_dialplan_asterisk -# * mod_say_ru -# You can modify this and other options in the BUILD CONFIGURATION section below - -# Built using http://wiki.archlinux.org/index.php/VCS_PKGBUILD_Guidelines -# Maintainer: TJ Vanderpoel - -# BUILD CONFIGURATION BEGINS # - -# ENABLE THIS IF YOU WANT ODBC IN THE CORE (uncomment it) -# You must have unixodbc installed or the build will fail - -#_odbc=--enable-core-odbc-support - -# SET THIS TO GET HIGHER QUALITY SOUNDFILES -# Value can be "hd-", "uhd-", or "cd-" to get 16k, 32k, or 48k sounds. -# By default we only download the 8k sounds. If you only use g711 or -# 8k codecs, leave this as-is - -_sounds="" - -# ADDED MODULES -# If you don't need/want these modules remove them from _enabled_modules -# You can add any modules here you wish to add, make sure they're not -# in _disabled_modules, though -# -# xml_int/mod_xml_curl - Remote http dialplan lookups/control -# xml_int/mod_xml_cdr - Remote http dialplan lookups/control -# applications/mod_callcenter - Inbound call queueing system -_enabled_modules=(xml_int/mod_xml_curl - xml_int/mod_xml_cdr - formats/mod_shout - applications/mod_callcenter - endpoints/mod_dingaling - applications/mod_directory - asr_tts/mod_flite) - -# DISABLED MODULES -# Remove from _disabled_modules if you want to build these -# -# say/mod_say_ru - Russian phrases -# dialplans/mod_dialplan_asterisk - Legacy dialplan -_disabled_modules=(say/mod_say_ru - dialplans/mod_dialplan_asterisk) - -# NOTE: We build --without-python due to Arch defaulting python3 as python. -# Uncomment the following to attempt building it anyway - -#_python=--with-python - -# CONCURRENT BOOTSTRAP -# Uncomment this to enable backgrounded concurrent bootstrap operations. -# You will suffer a lot of autotools scroll from this, Fair Warning. - -#_concurrent="-j" - -# BUILD CONFIGURATION ENDS # -# # -# CHANGE ANYTHING BELOW HERE AT YOUR OWN RISK! # -# # - -pkgname=freeswitch-git -_gitname="freeswitch" -pkgver=1.5.0.186.g9650476 -pkgver(){ - cd "$srcdir/$_gitname" - git describe | sed 's/-/./g;s/^v//' -} -epoch=1 -pkgrel=1 -pkgdesc="Open Source soft switch (telephony engine) built from a specific, stable git commit tag" -arch=('i686' 'x86_64') -url="http://freeswitch.org" -license=('MPL') -depends=("util-linux-ng" 'lua') -makedepends=('git' 'libjpeg' 'curl') -optdepends=('unixodbc: for odbc support in the core' - 'python: for some contrib scripts') -provides=('freeswitch') -conflicts=('freeswitch') -install=freeswitch.install -source=('freeswitch.conf.d' 'freeswitch.rc.conf' 'README.freeswitch' 'run.freeswitch' 'run_log.freeswitch' 'conf_log.freeswitch' "$_gitname::git://git.freeswitch.org/freeswitch.git" ) -changelog='ChangeLog' - - -enable_module() { - _fs_mod=$1 - sed -i -e "s|^#${_fs_mod}|${_fs_mod}|" modules.conf -} - -disable_module() { - _fs_mod=$1 - sed -i -e "s|^${_fs_mod}|#${_fs_mod}|" modules.conf -} - -build() { - cd "$srcdir/$_gitname" - - # BUILD BEGINS - msg "Bootstrapping..." - ./bootstrap.sh ${_concurrent} > /dev/null - msg "Bootstrap Complete" - - # MODULE ENABLE/DISABLE - for _mod in ${_enabled_modules[@]};do - msg "Enabling $_mod" - enable_module $_mod - done - - for _mod in ${_disabled_modules[@]};do - msg "Disabling $_mod" - disable_module $_mod - done - - msg "Module Configuration Complete, Stop Now with Ctrl-C if the above is not correct" - sleep 5 - - # CONFIGURE - ./configure --prefix=/var/lib/freeswitch ${_python:---without-python} \ - --bindir=/usr/bin --sbindir=/usr/sbin --localstatedir=/var \ - --sysconfdir=/etc/freeswitch --datarootdir=/usr/share \ - --libexecdir=/usr/lib/freeswitch --libdir=/usr/lib/freeswitch \ - --includedir=/usr/include/freeswitch ${_odbc} \ - --with-recordingsdir=/var/spool/freeswitch/recordings \ - --with-dbdir=/var/spool/freeswitch/db \ - --with-pkgconfigdir=/usr/lib/pkgconfig \ - --with-logfiledir=/var/log/freeswitch \ - --with-modinstdir=/usr/lib/freeswitch/mod \ - --with-rundir=/run/freeswitch - - # COMPILE - make -j1 -} - -enable_mod_xml() { - _fs_mod=$(basename $1) - - if [ "x$(grep $_fs_mod $pkgdir/etc/freeswitch/autoload_configs/modules.conf.xml)" == "x" ];then - msg "Adding missing module ${_fs_mod} to modules.conf.xml" - sed -i -e "s|^\(\s*\)|\t\t<\!-- added by archlinux package -->\n\t\t\n\1|" \ - "$pkgdir/etc/freeswitch/autoload_configs/modules.conf.xml" - else - msg "Enabling module ${_fs_mod} in modules.conf.xml" - sed -i -e "s|^\(\s*\)<\!--\s*\(\)\s*-->|\1\2|" \ - "$pkgdir/etc/freeswitch/autoload_configs/modules.conf.xml" - fi - -} - -disable_mod_xml() { - _fs_mod=$(basename $1) - msg "Disabling module ${_fs_mod} in modules.conf.xml" - sed -i -e "s|^\(\s*\)\(\)|\1<\!-- \2 -->|" \ - "$pkgdir/etc/freeswitch/autoload_configs/modules.conf.xml" -} - -package() { - cd "$srcdir/$_gitname" - make DESTDIR="$pkgdir/" install - make DESTDIR="$pkgdir/" ${_sounds}moh-install - make DESTDIR="$pkgdir/" ${_sounds}sounds-install - - cd "$pkgdir" # MUY IMPORTANT, $PWD is $pkgdir from here on out - # Mangle freeswitch's installed dirs into a more compliant structure, - # leaving symlinks in their place so freeswitch doesn't notice. - ln -s /var/log/freeswitch var/lib/freeswitch/log - ln -s /var/spool/freeswitch/db var/lib/freeswitch/db - ln -s /var/spool/freeswitch/recordings var/lib/freeswitch/recordings - install -D -m 0755 -d var/spool/freeswitch/storage && \ - ln -s /var/spool/freeswitch/storage var/lib/freeswitch/storage - rm usr/lib/freeswitch/mod/*.la 2>/dev/null|| true - rm usr/lib/freeswitch/*.la 2>/dev/null || true - ln -s /usr/lib/freeswitch/mod var/lib/freeswitch/mod - install -D "$srcdir/freeswitch.rc.conf" etc/rc.d/freeswitch - install -D -m 0644 "$srcdir/freeswitch.conf.d" etc/conf.d/freeswitch - install -D -m 0644 "$srcdir/README.freeswitch" usr/share/doc/freeswitch/README - cp -a "$srcdir/${_gitname}-build/docs" usr/share/doc/freeswitch - install -D -m 0755 -d usr/share/doc/freeswitch/support-d - cp -a "$srcdir/${_gitname}-build/support-d" usr/share/doc/freeswitch/ - install -D -m 0755 -d usr/share/doc/freeswitch/scripts - cp -a "$srcdir/${_gitname}-build/scripts" usr/share/doc/freeswitch/ - # Copy upstream confs - install -D -m 0755 -d usr/share/doc/freeswitch/examples/conf.default - install -D -m 0755 -d usr/share/doc/freeswitch/examples/conf.archlinux - ln -s /etc/freeswitch var/lib/freeswitch/conf - cp -a etc/freeswitch/* usr/share/doc/freeswitch/examples/conf.default/ - - for _mod in ${_enabled_modules[@]};do - enable_mod_xml $_mod - done - - for _mod in ${_disabled_modules[@]};do - disable_mod_xml $_mod - done - - mv etc/freeswitch/* usr/share/doc/freeswitch/examples/conf.archlinux/ - rmdir etc/freeswitch - install -D -m0755 -d usr/share/freeswitch/conf - install -D -m 0755 "$srcdir/run.freeswitch" etc/sv/freeswitch/run - install -D -m 0755 "$srcdir/run_log.freeswitch" etc/sv/freeswitch/log/run - install -D -m 0644 "$srcdir/conf_log.freeswitch" etc/sv/freeswitch/log/conf -} -md5sums=('f674b302edeb1895bbefcaf7bb8510ca' - '9952aa0f114ee890ebd1170b7264e907' - 'bfa0c6c70c8173bc78fd228bd42a98ef' - '4126dcbe4e1e4f689230a0fe40edcb68' - 'e9f0bdde366bca6fd29a9202818f3591' - 'e6411d793501c29ec4afd6d54018de1b' 'SKIP') diff --git a/aur/freeswitch-git/README.freeswitch b/aur/freeswitch-git/README.freeswitch deleted file mode 100644 index 2dfed8669..000000000 --- a/aur/freeswitch-git/README.freeswitch +++ /dev/null @@ -1,228 +0,0 @@ -== USAGE == - -Start the freeswitch daemon with /etc/rc.d/freeswitch. -Add 'freeswitch' to DAEMONS in /etc/rc.conf and it will start at boot time. -All configuration is done in /etc/freeswitch/. -/usr/bin/fs_cli will bring up the console to freeswitch once it's running. - -== SUPPORT == - -See http://wiki.freeswitch.org for up-to-date configuration documentation. -Official (paid) support available through http://freeswitch.org or -consulting at freeswitch dot org. -#freeswitch on Freenode IRC network. - -== DESCRIPTION == - -From http://freeswitch.org: - -Welcome To FreeSWITCH -The World's First Cross-Platform Scalable FREE Multi-Protocol Soft Switch - -FreeSWITCH is a scalable open source cross-platform telephony platform designed to route and -interconnect popular communication protocols using audio, video, text or any other form of media. -It was created in 2006 to fill the void left by proprietary commercial solutions. FreeSWITCH also -provides a stable telephony platform on which many telephony applications can be developed using -a wide range of free tools. - -FreeSWITCH was originally designed and implemented by Anthony Minessale with the help of Brian West -and Michael Jerris. All 3 are former developers of the popular Asterisk open source PBX. The project -was initiated to focus on several design goals including modularity, cross-platform support, -scalability and stability. Today, many more developers and users contribute to the project on a daily -basis. - -We support various communication technologies such as Skype, SIP, H.323 and GoogleTalk making it easy -to interface with other open source PBX systems such as sipXecs, Call Weaver, Bayonne, YATE or -Asterisk. - -FreeSWITCH supports many advanced SIP features such as presence/BLF/SLA as well as TCP TLS and sRTP. -It also can be used as a transparent proxy with and without media in the path to act as a SBC -(session border controller) and proxy T.38 and other end to end protocols. - -FreeSWITCH supports both wide and narrow band codecs making it an ideal solution to bridge legacy -devices to the future. The voice channels and the conference bridge module all can operate at 8, 12, -16, 24, 32 or 48 kilohertz and can bridge channels of different rates. The G.729 codec is also -available under a commercial license. - -FreeSWITCH builds natively and runs standalone on several operating systems including Windows, -Mac OS X, Linux, BSD and Solaris on both 32 and 64 bit platforms. - -FreeSWITCH supports FAX, both over audio and T.38, and can gateway between the two. - -Our developers are heavily involved in open source and have donated code and other resources to other -telephony projects including openSER, sipXecs, The Asterisk Open Source PBX and Call Weaver. - -== FEATURES == - -From http://wiki.freeswitch.org/wiki/Specsheet: - -Possible Uses - - * Rating & Routing Server - * Transcoding B2BUA - * IVR & Announcement Server - * Conference Server - * Voicemail Server - * SBC (Session Border Controller) - * Basic Topology Hiding Session Border Controller - * Zaptel, Sangoma, Rhino, PIKA Hardware Support (Analog and PRI), and Khomp Brazilian telephony hardware manufacturer - * Fax server - * T.38 gateway, termination, and origination mode - * T.30 to T.38 and T.38 to T.30 gateway - See also: mod_spandsp - And, of course, a PBX - -Features - - * Centralized User/Domain Directory (directory.xml) - * Nano Second CDR granularity - * Call recording (In Stereo caller/callee left/right) - * High Performance Multi-Threaded Core engine - * Configuration via cURL to your HTTP server (mod_xml_curl). - * XML Config files for easy parsing. - * Protocol Agnostic - * ZRTP support for transparent RTP based key exchange and encryption - * Configurable RFC 2833 Payload type - * Inband DTMF generation and detection. - * Software based Conference (no hardware requirement) - * Wideband Conferencing - * Media / No Media modes - * Proper ENUM/ISN dialing built in - * Detailed CDR in XML - * Radius CDR - * Subscription server - * Shared Line Appearances - * Bridged Line Appearances - * Enterprise/Carrier grade Eventing Engine. (XML Events, Name Value Events, Multicast Events) - * Loadable File formats and streaming - * Stream to and play from Shoutcast and Icecast - * Multi-lingual Speech Phrase Interface - * ASR/TTS support (native and via MRCP) - * Basic IP/PBX features - * Automated Attendant - * Custom Ring Back Tones (early_media) - * XML-RPC support - * Multiple format CDRs supported - * SQL Engine provides session persistence - * Thread Isolation - * Parallel Hunting - * Serial Hunting - * Mozilla Public License - * Support - * Paid support available - * Free support via IRC & E-mail - * Many supported codecs - * CELT (32 kHz ahd 48 kHz) - * G.722.1 (wideband) - * G.722.1C (wideband 32 kHz) - * G.722 (wideband) - * G.711 - * G.726 (16k, 24k, 32k, 48k) AAL2 and RFC 3551 - * G.723.1 (passthrough) - * G.729AB (Requires a license unless using passthrough) - * AMR (passthrough) - * iLBC - * Speex (narrow and wideband) - * LPC-10 - * DVI4 (ADPCM) 8 kHz and 16 kHz - * SILK - * Video Codecs (passthrough): - * Theora - * H.261 - * H.263 - * H.264 - * MP4 - * More Codec Information: http://wiki.freeswitch.org/wiki/Codecs - * Live Migration of calls from one FreeSWITCH box to another. See - http://wiki.freeswitch.org/wiki/Freeswitch_HA - -Applications - - * Voicemail - * Multitenancy - Enterprise/Carrier configuration - * Time of Day Greetings - * Urgent Message Tagging - * E-mail Delivery - * Playback and Rerecord messages before delivery. - * Keys are templates so you can rearrange to fit your needs. - * Callback support from inside voicemail. - * Podcast of Voicemail (RSS) - * Message Waiting Indicator (MWI) - * Support for Queues (via mod_fifo or mod_callcenter) - * Parking (via mod_fifo) - * Conference - * Software based Conferencing without any hardware requirements. - * Wideband conferences. - * Multiple on-demand or scheduled conferences with entry/exit announcements - * Play files into the conference or a single member. - * Relationships - * TTS integration - * Transfers - * Outbound Calling - * Configurable Key Lay - * Volume, Gain and Energy level per call. - * Bridge to Conference transition - * Multi Party outbound dialing. - * Inbound Call Center Queues - * RSS Reader - * Fax endpoint, gateway and passthrough mode. - * T.30 (G.711) Audio Fax (via mod_spandsp) formerly known as mod_fax. - * T.38 faxing (gateway, endpoint and passthrough) - -Protocols - - * SIP - * UDP, TCP, SCTP and TLS transports for full SIP compliance. - * IPv6 Support - * SIP Session timers - * RTP Timers - * RFC 3263 (SRV and NAPTR) - * SRTP via SDES (Works with Polycom, Snom, Linksys and Grandstream) - * Blind SIP Registration - * STUN Support - * Jitter buffer - * NAT Support - * Distributed SIP registrations - * Late Codec Negotiation - * Multiple SIP registrations per user account. - * Multitenancy - Multiple SIP UAs - * SIP Reinvites. - * Can act as an SBC (Session Border Controller) - * Manage Presence - * SIP/SIMPLE (can gateway to other chat protocols) - * SIP Multicast Paging support for Linksys and Snom - * Intercom/AutoAnswer support. - * Call features like Call Hold (Re-INVITE), Blind Transfer (REFER), Call Forward (302), etc. - * Jingle - * Interop with Google Talk, Google Voice, and Telepathy - * H.323 with mod_opal (opalvoip.org) - * mod_h323 - H.323 Endpoint module based on the h323plus library. - * mod_skinny - Skinny Call Control Protocol (SCCP) - -Languages - - * JavaScript (Using the SpiderMonkey JavaScript engine.) - * ODBC Support from inside your JavaScript - * Extendable modules for JavaScript - * Tone Generation - * Python - * Perl - * Lua - -Cross Platform - - * Builds native on Windows in MSVC - * Builds on Mac OS X, Linux, Solaris and *BSD. - * Minimum/Recommended System Requirements - - * 32-bit OS (64-bit recommended) - * 512MB RAM (1GB recommended) - * 50MB of Disk Space - * System requirements depend on your deployment needs. We recommend you plan for 50% duty cycle. - -Performance - - * Tested under load for over 100 hours - * 10,000,000+ calls - * At rates exceeding 50 CPS - * Performance will vary depending on application. You will need to test for your particular situation. diff --git a/aur/freeswitch-git/conf_log.freeswitch b/aur/freeswitch-git/conf_log.freeswitch deleted file mode 100644 index fadc84e10..000000000 --- a/aur/freeswitch-git/conf_log.freeswitch +++ /dev/null @@ -1 +0,0 @@ -USERGROUP=freeswitch:daemon diff --git a/aur/freeswitch-git/freeswitch.conf.d b/aur/freeswitch-git/freeswitch.conf.d deleted file mode 100644 index fd012baf0..000000000 --- a/aur/freeswitch-git/freeswitch.conf.d +++ /dev/null @@ -1,3 +0,0 @@ -# options to start freeswitch with -# We default to -nonat, if you need nat, remove it -FREESWITCH_OPTS="-nonat" diff --git a/aur/freeswitch-git/freeswitch.install b/aur/freeswitch-git/freeswitch.install deleted file mode 100644 index 369958383..000000000 --- a/aur/freeswitch-git/freeswitch.install +++ /dev/null @@ -1,52 +0,0 @@ -pre_install() { - getent group freeswitch > /dev/null - if [ $? -ne 0 ];then - echo 'Adding group freeswitch' - groupadd -r freeswitch - fi - id freeswitch > /dev/null - if [ $? -ne 0 ];then - echo 'Adding user freeswitch' - useradd -r freeswitch -g freeswitch - fi -} - -post_install() { - echo "FreeSWITCH is installed!" - echo "<<>> You MUST change the default_password in /etc/freeswitch/vars.xml - Failure to do so will leave your default extension 1000 vulnerable" - echo "FreeSWITCH's default configuration is available in - /usr/share/doc/freeswitch/examples/conf.default, with this package's modified - version in /usr/share/doc/freeswitch/examples/conf.archlinux" - post_upgrade -} - -post_upgrade() { - if [ -d /etc/freeswitch -a ! -L /etc/freeswitch ];then - echo "Moving your old configs (/etc/freeswitch) to /usr/share/freeswitch/conf/local" - mv /etc/freeswitch /usr/share/freeswitch/conf/local - ln -s /usr/share/freeswitch/conf/local /etc/freeswitch - fi - [ -d /usr/share/freeswitch/conf/pbx ] || cp -a /usr/share/doc/freeswitch/examples/conf.archlinux/ /usr/share/freeswitch/conf/pbx - chown -R freeswitch:freeswitch /usr/share/freeswitch/conf/pbx - if [ ! -L /etc/freeswitch ];then - echo "Linking /usr/share/freeswitch/conf/pbx to /etc/freeswitch" - ln -s /usr/share/freeswitch/conf/pbx /etc/freeswitch - fi - chown -R freeswitch:freeswitch /var/{run,spool,log}/freeswitch - chown -R freeswitch:freeswitch /etc/sv/freeswitch - echo "The running configuration directory is symlinked as /etc/freeswitch" - echo - echo "FreeSWITCH can be started with rc.d freeswitch start or /etc/sv/freeswitch/run" - echo "To start on boot add freeswitch to /etc/rc.conf or supervise the /etc/sv/freeswitch directory" -} - -post_remove() { - rm /etc/freeswitch - echo "Not removing /usr/share/freeswitch/conf/ config directories!! If you do not want to keep them, rm -rf them away" - userdel freeswitch - getent group freeswitch &> /dev/null && groupdel freeswitch - true -} - -# vim:set ts=2 sw=2 et: diff --git a/aur/freeswitch-git/freeswitch.rc.conf b/aur/freeswitch-git/freeswitch.rc.conf deleted file mode 100644 index 614f5c3c5..000000000 --- a/aur/freeswitch-git/freeswitch.rc.conf +++ /dev/null @@ -1,78 +0,0 @@ -#!/bin/bash - -daemon_name=freeswitch - -. /etc/rc.conf -. /etc/rc.d/functions -. /etc/conf.d/$daemon_name -get_pid() { - pidof -o %PPID $daemon_name -} -rundir=/run/freeswitch -[ -d $rundir ] || mkdir $rundir -chown freeswitch $rundir - -case "$1" in - fgstart) - stat_busy "Starting $daemon_name daemon in the foreground" - stat_done - ulimit -s 240 - exec su -c "/usr/bin/freeswitch $FREESWITCH_OPTS -nf" freeswitch - ;; - start) - stat_busy "Starting $daemon_name daemon" - - PID=$(get_pid) - if [ -z "$PID" ]; then - [ -f $rundir/$daemon_name.pid ] && rm -f $rundir/$daemon_name.pid - # RUN - ulimit -s 240 - su -c "/usr/bin/freeswitch $FREESWITCH_OPTS" freeswitch - # - if [ $? -gt 0 ]; then - stat_fail - exit 1 - else - echo $(get_pid) > $rundir/$daemon_name.pid - add_daemon $daemon_name - stat_done - fi - else - stat_fail - exit 1 - fi - ;; - - stop) - stat_busy "Stopping $daemon_name daemon" - PID=$(get_pid) - # KILL - [ ! -z "$PID" ] && kill $PID &> /dev/null - # - if [ $? -gt 0 ]; then - stat_fail - exit 1 - else - rm -f $rundir/$daemon_name.pid &> /dev/null - rm_daemon $daemon_name - stat_done - fi - ;; - - restart) - $0 stop - sleep 3 - $0 start - ;; - - status) - stat_busy "Checking $daemon_name status"; - ck_status $daemon_name - fs_cli -x 'status' - ;; - - *) - echo "usage: $0 {start|stop|restart|status|fgstart}" -esac - -exit 0 diff --git a/aur/freeswitch-git/run.freeswitch b/aur/freeswitch-git/run.freeswitch deleted file mode 100755 index d6898797f..000000000 --- a/aur/freeswitch-git/run.freeswitch +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh -e -. /etc/conf.d/freeswitch -[ -d /run/freeswitch ] || mkdir /run/freeswitch -chown freeswitch /run/freeswitch -ulimit -c unlimited # The maximum size of core files created. -ulimit -d unlimited # The maximum size of a process's data segment. -ulimit -f unlimited # The maximum size of files created by the shell (default option) -ulimit -i unlimited # The maximum number of pending signals -ulimit -n 999999 # The maximum number of open file descriptors. -ulimit -q unlimited # The maximum POSIX message queue size -ulimit -u unlimited # The maximum number of processes available to a single user. -ulimit -v unlimited # The maximum amount of virtual memory available to the process. -ulimit -x unlimited # ??? -ulimit -l unlimited # The maximum size that may be locked into memory. -ulimit -s 240 # The maximum stack size -ulimit -a # All current limits are reported. -echo "Starting Freeswitch with ${FREESWITCH_OPTS}" -exec chpst -u freeswitch:daemon /usr/bin/freeswitch -u freeswitch -g daemon -nf -nc ${FREESWITCH_OPTS} 2>&1 - diff --git a/aur/freeswitch-git/run_log.freeswitch b/aur/freeswitch-git/run_log.freeswitch deleted file mode 100755 index a8ca52c32..000000000 --- a/aur/freeswitch-git/run_log.freeswitch +++ /dev/null @@ -1,29 +0,0 @@ -#!/bin/sh -e -if [ $0 != "./run" ];then - echo "This script meant to be linked as ./run in a service/log directory only!" - exit 1 -fi -logdir=$(basename $(pwd)) -if [ "$logdir" != "log" ];then - echo "This script meant to be run from a service/log directory only!" - exit 1 -fi -if [ -w /var/log ];then - if [ -f ./conf ];then - source ./conf - fi - user_group=${USERGROUP:-daemon:adm} - service=$(basename $(dirname $(pwd))) - [ -d "/var/log/$service" ] || mkdir -p "/var/log/$service" - [ -L ./main ] || [ -d ./main ] || ln -s "/var/log/$service" ./main - [ -L ./current ] || ln -s main/current - usergroup=$(stat -c "%U:%G" "/var/log/$service") - if [ "$usergroup" != "$user_group" ];then - chown -R $user_group "/var/log/$service" - fi - echo Logging as $user_group to /var/log/$service - exec chpst -u $user_group svlogd -t ./main -else - echo Logging in $PWD - exec svlogd -t ./ -fi