Merge branch 'master' of github.com:archlinuxarm/PKGBUILDs

alarm/chromium-pepper-flash/PKGBUILD

@@ -14,8 +14,7 @@ provides=("chromium-pepper-flash=${pkgver}")
 optdepends=('pulseaudio-alsa: For PulseAudio users')
 install=chromium-pepper-flash.install
 source=('license.html::http://www.google.com/chrome/intl/en/eula_text.html'
-         "http://mirror.nekinie.com/chromium-pepper-flash-armv7h/PepperFlash-${pkgver}-armv7h.tar.gz")
+         "http://archlinuxarm.org/builder/src/PepperFlash-${pkgver}-armv7h.tar.gz")
-	 # Backup (slow) mirror "https://www.dray.be/PepperFlash-${pkgver}-armv7h.tar.gz"
 md5sums=('ba19ea498f294975d320ff0b26a6cd63'
          '7631da586071874409dac066f85ca567')
 

alarm/gst-plugin-cedar/PKGBUILD

@@ -0,0 +1,29 @@
+# Contributor: Oleg Trenkin <o.trenkin@ya.ru>
+
+buildarch=4
+
+_pkgname=gst-plugin-cedar
+pkgname=${_pkgname}-sun7i
+pkgver=0.10.1
+pkgrel=1
+pkgdesc="GStreamer 0.10 plugin for Cedar h264 hardware encoding with no binary blobs"
+arch=('armv7h')
+license=('GPL2')
+url="https://github.com/ebutera/gst-plugin-cedar"
+depends=('gstreamer0.10-base')
+
+_rev=908987a
+source=("${pkgname}-${pkgver}.tar.gz::https://github.com/ebutera/${_pkgname}/tarball/${_rev}")
+md5sums=('73c5cd32e32c0e10e3bebc2c576c23fc')
+
+build() {
+  cd $srcdir/ebutera-${_pkgname}-${_rev}
+  autoreconf -fi
+  ./configure --prefix=/usr
+  make
+}
+
+package() {
+  cd $srcdir/ebutera-${_pkgname}-${_rev}
+  make DESTDIR="${pkgdir}" install
+}

alarm/macspoof/PKGBUILD

@@ -0,0 +1,23 @@
+# Maintainer Jason Plum <jplum@archlinuxarm.org>
+
+pkgname=macspoof
+pkgdesc="MAC Spoofing service"
+pkgver=0.1
+pkgrel=1
+arch=('any')
+
+url="https://wiki.archlinux.org/index.php/MAC_Address_Spoofing#Systemd_unit"
+license=('GPL2')
+
+source=('macspoof@.service'
+        'macspoof.conf.d')
+md5sums=('c830b7ee6425390005189a2a01bb84eb'
+         'b50f74e4b71d6fda819feb89ccb62bc3')
+backup=('etc/conf.d/macspoof')
+install=macspoof.install
+
+package() {
+    install -m644 -D "${srcdir}/macspoof.conf.d" "${pkgdir}/etc/conf.d/macspoof"
+    install -m644 -D "${srcdir}/macspoof@.service" "${pkgdir}/usr/lib/systemd/system/macspoof@.service"
+}
+

alarm/macspoof/macspoof.conf.d

@@ -0,0 +1,4 @@
+# macspoof@.service configuration file
+# example of setting for eth0 and wlan0
+# mac_addr_eth0=DE:AD:BE:EF:00:01
+# mac_addr_wlan0=DE:AD:BE:EF:00:02

alarm/macspoof/macspoof.install

@@ -0,0 +1,3 @@
+post_install() {
+    echo "    Be sure to edit /etc/conf.d/macspoof"
+}

alarm/macspoof/macspoof@.service

@@ -0,0 +1,13 @@
+[Unit]
+Description=MAC address change %I
+Before=dhcpcd@%i.service netctl@%1.service netctl-ifplugd@%i.service netctl-auto@%i.service
+
+[Service]
+Type=oneshot
+EnvironmentFile=/etc/conf.d/macspoof
+ExecStart=/usr/bin/ip link set dev %i down
+ExecStart=/usr/bin/ip link set dev %i address ${mac_addr_%i}
+
+
+[Install]
+WantedBy=network.target

alarm/raspberrypi-firmware/PKGBUILD

@@ -7,7 +7,7 @@ pkgname=('raspberrypi-firmware'
          'raspberrypi-firmware-emergency-kernel'
          'raspberrypi-firmware-tools'
          'raspberrypi-firmware-examples')
-pkgver=20140223
+pkgver=20140312
 pkgrel=1
 pkgdesc="Firmware files for Raspberry Pi"
 arch=('any')

aur/asterisk/PKGBUILD

@@ -3,8 +3,8 @@
 # Contributor: Maik Broemme <mbroemme@libmpq.org>
 
 pkgname=asterisk
-pkgver=12.0.0
+pkgver=12.1.0
-pkgrel=4
+pkgrel=1
 pkgdesc="A complete PBX solution"
 arch=('i686' 'x86_64')
 backup=('etc/asterisk/acl.conf'
@@ -126,7 +126,7 @@ source=(http://downloads.asterisk.org/pub/telephony/asterisk/releases/asterisk-$
 	${pkgname}.logrotated \
 	${pkgname}.tmpfile)
 install=${pkgname}.install
-sha256sums=('0efc4507d5384447011fd1148eaaae2d06f70b04c736b4c73fbb9941a9440a2b'
+sha256sums=('879bbd2bbf68ef76eb77406ba3309b8515db0a662408af991d694fbba99c0b9e'
 	'74e0b278d553499f0c648a6e3d55c0dbb11b0c6dc93a85b020a21eafadb83783'
 	'caa24cfec5c6b4f8cea385269e39557362acad7e2a552994c3bc24080e3bdd4e'
 	'673c0c55bce8068c297f9cdd389402c2d5d5a25e2cf84732cb071198bd6fa78a')

aur/cower/PKGBUILD

@@ -2,9 +2,9 @@
 
 pkgname=cower
 pkgver=11
-pkgrel=1
+pkgrel=2
 pkgdesc="A simple AUR agent with a pretentious name"
-arch=('any')
+arch=('i686' 'x86_64')
 url="http://github.com/falconindy/cower"
 license=('MIT')
 depends=('curl' 'yajl' 'pacman')
@@ -14,11 +14,17 @@ md5sums=('7e2f3c5a8bc258ee129098aca5bfda9e'
          'SKIP')
 
 build() {
-  make -C "$pkgname-$pkgver"
+  cd "$pkgname-$pkgver"
+
+  make
+  sed '/^$/q' cower.c >LICENSE
 }
 
 package() {
-  make -C "$pkgname-$pkgver" PREFIX=/usr DESTDIR="$pkgdir" install
+  cd "$pkgname-$pkgver"
+
+  make PREFIX=/usr DESTDIR="$pkgdir" install
+  install -Dm644 LICENSE "$pkgdir/usr/share/licenses/$pkgname/LICENSE"
 }
 
 # vim: ft=sh syn=sh

aur/openswan/PKGBUILD

@@ -1,7 +1,7 @@
 # Contributor: xjpvictor Huang <ke [AT] xjpvictor [DOT] info>
 pkgname=openswan
-pkgver=2.6.39
+pkgver=2.6.41
-pkgrel=2
+pkgrel=1
 pkgdesc="Open Source implementation of IPsec for the Linux operating system"
 url="http://www.openswan.org"
 license=('GPL' 'custom')
@@ -42,5 +42,5 @@ package() {
   # fix python2
   sed -i '1s|python|python2|' $pkgdir/usr/lib/openswan/verify
 }
-md5sums=('199757597f9f776d85752bb0c713b5ed'
+md5sums=('da2e8b02ecc30a408cc5766767fef84f'
          'd8b465c10838c72e31329d65011002b6')

community/caps/PKGBUILD

@@ -6,7 +6,7 @@
 #  - delete prepare function that set SSE build flags
 
 pkgname=caps
-pkgver=0.9.16
+pkgver=0.9.21
 pkgrel=1
 pkgdesc="The LADSPA C* Audio Plugin Suite"
 arch=('i686' 'x86_64')
@@ -15,7 +15,7 @@ license=('GPL3')
 groups=('ladspa-plugins')
 depends=('ladspa')
 source=("http://quitte.de/dsp/caps_$pkgver.tar.bz2")
-md5sums=('85e79596f22636b154b152efe54d05ce')
+md5sums=('8d1fb8fa5d185a348bde14c88102ffc2')
 
 build() {
   cd $pkgname-$pkgver

community/docker/PKGBUILD

@@ -4,17 +4,18 @@
 # Add patch for ARM being a supported platform.
 
 pkgname=docker
-_truever=0.8.0
+_truever=0.9.0
 pkgver=${_truever%.*}
-pkgrel=1.2
+pkgrel=1
 epoch=1
 pkgdesc='Pack, ship and run any application as a lightweight container'
 arch=('x86_64')
 url='http://www.docker.io/'
 license=('Apache')
-depends=('bridge-utils' 'iproute2' 'device-mapper' 'lxc' 'sqlite' 'systemd')
+depends=('bridge-utils' 'iproute2' 'device-mapper' 'sqlite' 'systemd')
 makedepends=('git' 'go' 'btrfs-progs')
-optdepends=('btrfs-progs: btrfs backend support')
+optdepends=('btrfs-progs: btrfs backend support'
+            'lxc: lxc driver support')
 # don't strip binaries! A sha1 is used to check binary consistency.
 options=('!strip')
 install=$pkgname.install

community/libantlr3c/PKGBUILD

@@ -0,0 +1,44 @@
+# $Id$
+# Maintainer: Sergej Pupykin <pupykin.s+arch@gmail.com>
+# Contributor: Mathieu Clabaut <mathieu.clabaut@gmail.com>
+# Contributor: Artyom Smirnov <smirnoffjr@gmail.com>
+# Contributor: Alexis Robert <alexis.robert@gmail.com>
+# Maintainer: Daniel Nagy < danielnagy at gmx de>
+
+# ALARM: Kevin Mihelich <kevin@archlinuxarm.org>
+#  - configure with --disable-abiflags
+#  - patch to build with environment's CFLAGS
+
+pkgname=libantlr3c
+pkgver=3.4
+pkgrel=1
+pkgdesc="C runtime for the ANTLR parsing library"
+url="http://www.antlr.org/"
+arch=("i686" "x86_64")
+license=("BSD")
+depends=('bash')
+makedepends=()
+source=(http://www.antlr3.org/download/C/${pkgname}-${pkgver}.tar.gz
+        antlr-c-3.3-cflags.patch)
+md5sums=('08b1420129d5dccd0f4461cedf2a0d7d'
+         'f936f142053c03ec57a0be95b7b8fe0c')
+
+prepare() {
+  cd "${pkgname}-${pkgver}"
+  patch -p1 -i ../antlr-c-3.3-cflags.patch
+  autoreconf -fi
+}
+
+build() {
+  cd "${srcdir}/${pkgname}-${pkgver}"
+  [ "$CARCH" = "x86_64" ] && _cfgopt=--enable-64bit
+  [[ $CARCH =~ arm.* ]] && _cfgopt=--disable-abiflags
+  ./configure --prefix=/usr --sysconfdir=/etc ${_cfgopt}
+  make
+}
+
+package() {
+  cd "${srcdir}/${pkgname}-${pkgver}"
+  make install DESTDIR="${pkgdir}"
+  install -Dm0644 COPYING $pkgdir/usr/share/licenses/$pkgname/COPYING
+}

community/libantlr3c/antlr-c-3.3-cflags.patch

@@ -0,0 +1,14 @@
+diff -ur libantlr3c-3.3-SNAPSHOT.old//configure.ac libantlr3c-3.3-SNAPSHOT/configure.ac
+--- libantlr3c-3.3-SNAPSHOT.old//configure.ac	2011-04-03 10:40:51.277000042 +0300
++++ libantlr3c-3.3-SNAPSHOT/configure.ac	2011-04-03 10:41:22.092000042 +0300
+@@ -134,8 +134,8 @@
+  ;;
+ esac
+ 
+-CFLAGS="$CCFLAGS64 $CPPCMNTFLAGS $OPTIMFLAGS $DEBUGFLAGS $WARNFLAGS"
+-AC_MSG_RESULT([$CFLAGS])
++AM_CFLAGS="$CCFLAGS64 $CPPCMNTFLAGS $OPTIMFLAGS $DEBUGFLAGS $WARNFLAGS"
++AC_MSG_RESULT([$AM_CFLAGS])
+ AC_SUBST([OBJECT_MODE])
+ 
+ AS_IF([test "x$enable_antlrdebug" = xno], [AC_DEFINE([ANTLR3_NODEBUGGER], [1], [Define if ANTLR debugger not required])], [])

community/libvirt/PKGBUILD

@@ -6,8 +6,8 @@
 #  - remove numactl from depends, doesn't build on ARM
 
 pkgname=libvirt
-pkgver=1.2.1
+pkgver=1.2.2
-pkgrel=4
+pkgrel=1
 pkgdesc="API for controlling virtualization engines (openvz,kvm,qemu,virtualbox,xen,etc)"
 arch=('i686' 'x86_64')
 url="http://libvirt.org/"
@@ -19,7 +19,6 @@ depends=('e2fsprogs' 'gnutls' 'iptables' 'libxml2' 'parted' 'polkit' 'python2'
 makedepends=('pkgconfig' 'lvm2' 'linux-api-headers' 'dnsmasq' 'lxc')
 optdepends=('bridge-utils: for briged networking (default)'
 	    'dnsmasq: for NAT/DHCP for guests'
-	    'kvm'
 	    'openbsd-netcat: for remote management over ssh'
 	    'qemu'
 	    'radvd'
@@ -64,17 +63,15 @@ install="libvirt.install"
 source=("http://libvirt.org/sources/$pkgname-$pkgver.tar.gz"
 	libvirtd.conf.d
 	libvirtd-guests.conf.d
-	libvirt.tmpfiles.d
+	libvirt.tmpfiles.d)
-	"FS#38546.patch::http://libvirt.org/git/?p=libvirt.git;a=commitdiff_plain;h=7f0fd427413fe04963b1bcb158cf70e980ad1842")
+md5sums=('592958ad1ddce7574d8cb0a31e635acd'
-md5sums=('cce374220f67895afb6331bd2ddedbfd'
          '3ed0e24f5b5e25bf553f5427d64915e6'
          '0a96ed876ffb1fcb9dff5a9b3a609c1e'
-         '020971887442ebbf1b6949e031c8dd3f'
+         '020971887442ebbf1b6949e031c8dd3f')
-         'f579805e75956d32992c6934346ee740')
 
 prepare() {
   cd "$srcdir/$pkgname-$pkgver"
-  patch -p1 <"$srcdir/FS#38546.patch"
+#  patch -p1 <"$srcdir/FS#38546.patch"
 }
 
 build() {
@@ -111,7 +108,7 @@ package() {
 
   # systemd stuff
   install -D -m644 "$srcdir"/libvirt.tmpfiles.d "$pkgdir"/usr/lib/tmpfiles.d/libvirt.conf
-  mv "$pkgdir"/lib/* "$pkgdir"/usr/lib/
+#  mv "$pkgdir"/lib/* "$pkgdir"/usr/lib/
 
   rm -rf \
 	"$pkgdir"/var/run \

community/xbmc/PKGBUILD

@@ -16,7 +16,7 @@ _prefix=/usr
 pkgname=xbmc
 pkgver=12.3
 _codename=Frodo
-pkgrel=11
+pkgrel=12
 pkgdesc="A software media player and entertainment hub for digital media"
 arch=('i686' 'x86_64')
 url="http://xbmc.org"
@@ -41,7 +41,7 @@ source=("http://mirrors.xbmc.org/releases/source/xbmc-$pkgver.tar.gz"
 	"polkit.rules"
 	"libass.patch::https://bugs.archlinux.org/index.php?getfile=11285")
 md5sums=('7ae385ebf8e5cfcb917393235e6efbdb'
-         'b643ab67e4675c6aa88af1857f35baf2'
+         '03e9a33e15714d1fd1f2a516abea5393'
          '02f7951824ee13103344f36009c0ef2a'
          '7fd6399d2ffbdf06b724f0cc2efa0784')
 

community/xbmc/xbmc.service

@@ -1,6 +1,6 @@
 [Unit]
 Description = Starts instance of XBMC using xinit
-After = remote-fs.target
+After = systemd-user-sessions.service
 Conflicts=getty@tty7.service
 
 [Service]

community/xulrunner/PKGBUILD

@@ -8,12 +8,12 @@
 #  - set extra CFLAG for v5
 
 pkgname=xulrunner
-pkgver=27.0
+pkgver=28.0
 pkgrel=1
 pkgdesc="Mozilla Runtime Environment"
 arch=('i686' 'x86_64')
 license=('MPL' 'GPL' 'LGPL')
-depends=('gtk2' 'mozilla-common' 'nss' 'libxt' 'hunspell' 'startup-notification' 'mime-types' 'dbus-glib' 'alsa-lib' 'libevent' 'libvpx' 'python2')
+depends=('gtk2' 'mozilla-common' 'nss' 'libxt' 'hunspell' 'startup-notification' 'mime-types' 'dbus-glib' 'libpulse' 'libevent' 'libvpx' 'python2')
 makedepends=('zip' 'unzip' 'pkg-config' 'diffutils' 'yasm' 'mesa' 'autoconf2.13' 'gstreamer0.10-base')
 url="http://wiki.mozilla.org/XUL:Xul_Runner"
 source=(ftp://ftp.mozilla.org/pub/mozilla.org/xulrunner/releases/$pkgver/source/xulrunner-$pkgver.source.tar.bz2
@@ -22,8 +22,8 @@ source=(ftp://ftp.mozilla.org/pub/mozilla.org/xulrunner/releases/$pkgver/source/
         shared-libs.patch)
 options=('!emptydirs' 'staticlibs')
 replaces=('xulrunner-oss')
-sha256sums=('4f6125c053e12c4ac3317b075e289b10ce470dd90ed6fc43c4572bf1acc64981'
+sha256sums=('6eacdc549c252da57d1f51a363ad8c7e62f09ec8c796e8eb69ddb3e1008df7af'
-            '1afb707bb7bdeb1f9b7a0d5ff875255bb634c1da81cb943e823559b773908204'
+            '7fd271e467e7bc61907d61c64b8dd57be152443d0517df3f3579a0e12785e5cd'
             '23485d937035648add27a7657f6934dc5b295e886cdb0506eebd02a43d07f269'
             'e2b4a00d14f4ba69c62b3f9ef9908263fbab179ba8004197cbc67edbd916fdf1')
 

community/xulrunner/mozconfig

@@ -34,4 +34,4 @@ ac_add_options --disable-tests
 ac_add_options --disable-installer
 
 # https://bugzilla.mozilla.org/show_bug.cgi?id=955876
-ac_add_options --enable-release
+#ac_add_options --enable-release

core/keyutils/PKGBUILD

@@ -6,7 +6,7 @@
 #  - must build -j1, everything must build in order
 
 pkgname=keyutils
-pkgver=1.5.8
+pkgver=1.5.9
 pkgrel=1
 pkgdesc="Linux Key Management Utilities"
 arch=('i686' 'x86_64')
@@ -16,7 +16,7 @@ depends=('glibc' 'sh')
 backup=('etc/request-key.conf')
 source=(http://people.redhat.com/~dhowells/${pkgname}/${pkgname}-${pkgver}.tar.bz2
 	request-key.conf.patch)
-md5sums=('3c7f463039b83833c12a9414c2fcb389'
+md5sums=('7f8ac985c45086b5fbcd12cecd23cf07'
          '89a819a7e4e90936b210c9d5020d296d')
 
 prepare() {

core/linux-am33x-legacy/PKGBUILD

@@ -9,8 +9,8 @@ pkgname=('linux-am33x-legacy' 'linux-headers-am33x-legacy')
 _kernelname=${pkgname#linux}
 _basekernel=3.8
 pkgver=${_basekernel}.13
-pkgrel=16
+pkgrel=17
-bonerel=40
+bonerel=41
 arch=('arm')
 url="http://www.kernel.org/"
 license=('GPL2')
@@ -24,8 +24,8 @@ source=("ftp://ftp.kernel.org/pub/linux/kernel/v3.x/linux-${_basekernel}.tar.xz"
         'aufs3-3.8.patch.xz')
 md5sums=('1c738edfc54e7c65faeb90c436104e2f'
          '412da22dabe4d7fcb78b3c14e53cd892'
-         '6f2fd139a31c62c7e718fd6a02fae008'
+         'bd2f7df63ff1d364be3cc90d92299d5b'
-         '17a28940b697d913f6d2fca230b5bacd'
+         'd2f559553a3e6c36cf6998125faa9922'
          '9d3c56a4b999c8bfbd4018089a62f662'
          'd819af0969e0726cbf9ae6be5e044a75')
 

core/linux-am33x-legacy/config

@@ -3068,7 +3068,6 @@ CONFIG_FB_SYS_FOPS=y
 CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 
@@ -3484,7 +3483,6 @@ CONFIG_USB_CYPRESS_CY7C63=m
 CONFIG_USB_CYTHERM=m
 CONFIG_USB_IDMOUSE=m
 CONFIG_USB_FTDI_ELAN=m
-# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 CONFIG_USB_LD=m
 CONFIG_USB_TRANCEVIBRATOR=m

core/linux-armv5/PKGBUILD

@@ -7,8 +7,8 @@ pkgbase=linux-armv5
 _srcname=linux-3.13
 _kernelname=${pkgbase#linux}
 _desc="ARMv5 based platforms"
-pkgver=3.13.5
+pkgver=3.13.6
-pkgrel=2
+pkgrel=1
 arch=('armv7h')
 url="http://www.kernel.org/"
 license=('GPL2')
@@ -21,7 +21,7 @@ source=("http://www.kernel.org/pub/linux/kernel/v3.x/${_srcname}.tar.xz"
         'imx23-olinuxino.patch'
         'gpio-clamp.patch')
 md5sums=('0ecbaf65c00374eb4a826c2f9f37606f'
-         '114c391a592131f1c12544e063173a45'
+         'a9b131a589a176b4c437b8ca4557b85e'
          'SKIP'
          'd277d406b1c488d7b26c0cf150afceb4'
          'c3abaa939372af7a07ae5c2196263110'
@@ -31,7 +31,7 @@ prepare() {
   cd "${srcdir}/${_srcname}"
 
   # add upstream patch
-  patch -Np1 -i "${srcdir}/patch-${pkgver}"
+  git apply "${srcdir}/patch-${pkgver}"
 
   patch -Np1 -i "${srcdir}/imx23-olinuxino.patch"
   patch -Np1 -i "${srcdir}/gpio-clamp.patch"

core/linux-armv7/PKGBUILD

@@ -7,7 +7,7 @@ pkgbase=linux-armv7
 _srcname=linux-3.13
 _kernelname=${pkgbase#linux}
 _desc="ARMv7 multi-platform"
-pkgver=3.13.5
+pkgver=3.13.6
 pkgrel=1
 rcnrel=armv7-x11
 arch=('armv7h')
@@ -25,8 +25,8 @@ source=("http://www.kernel.org/pub/linux/kernel/v3.x/${_srcname}.tar.xz"
         'mmc.patch'
         'config')
 md5sums=('0ecbaf65c00374eb4a826c2f9f37606f'
-         '114c391a592131f1c12544e063173a45'
+         'a9b131a589a176b4c437b8ca4557b85e'
-         'b4ff484a474169ec6d8aabe9763837b7'
+         '1b4a2bd6224093a770a82b87900b75b7'
          'SKIP'
          '3ad860d0d6daedc82091ea29c9730b95'
          '02cce6b8f88c4392f552b14d0bf2e71c'

core/linux-imx6-cubox-dt/PKGBUILD

@@ -15,18 +15,20 @@ _srcname=linux-linaro-stable-mx6-${_commit}
 _kernelname=${pkgname#linux}
 _basekernel=3.10
 pkgver=${_basekernel}.30
-pkgrel=2
+pkgrel=7
 arch=('arm')
 url="http://www.kernel.org/"
 license=('GPL2')
-makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc' 'uboot-mkimage' 'git' 'lzop')
+makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc' 'uboot-mkimage' 'git')
 options=('!strip')
 source=("https://github.com/solidrun/linux-linaro-stable-mx6/archive/${_commit}.tar.gz"
         'config'
-        'change-default-console-loglevel.pat')
+        'change-default-console-loglevel.pat'
+        'mxc_hdmi-dont-require-cea-mode.patch')
 md5sums=('40a7283cfa9b3519453928f787f67fe9'
-         '45a6128efb6305ab1ab7edca0779bf5f'
+         '40cddccd4c9ad68fcb98a089bde3842a'
-         '9d3c56a4b999c8bfbd4018089a62f662')
+         '9d3c56a4b999c8bfbd4018089a62f662'
+         '8dc29365fc5b0668c10f630cc5b5d82d')
 
 prepare() {
   cd "${srcdir}/${_srcname}"
@@ -43,7 +45,7 @@ prepare() {
   # remove this when a Kconfig knob is made available by upstream
   # (relevant patch sent upstream: https://lkml.org/lkml/2011/7/26/227)
   patch -Np1 -i "${srcdir}/change-default-console-loglevel.pat"
-
+  patch -Np1 -i "${srcdir}/mxc_hdmi-dont-require-cea-mode.patch"
 }
 
 build() {

core/linux-imx6-cubox-dt/config

@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/arm 3.10.30-2 Kernel Configuration
+# Linux/arm 3.10.30-7 Kernel Configuration
 #
 CONFIG_ARM=y
 CONFIG_MIGHT_HAVE_PCI=y
@@ -27,16 +27,16 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y
 #
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-ARCH"
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_HAVE_KERNEL_XZ=y
 CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
+CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_LZMA is not set
 # CONFIG_KERNEL_XZ is not set
-CONFIG_KERNEL_LZO=y
+# CONFIG_KERNEL_LZO is not set
 CONFIG_DEFAULT_HOSTNAME="(none)"
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
@@ -746,7 +746,7 @@ CONFIG_IRDA=y
 #
 # IrDA protocols
 #
-CONFIG_IRLAN=y
+# CONFIG_IRLAN is not set
 CONFIG_IRCOMM=y
 CONFIG_IRDA_ULTRA=y
 
@@ -1240,7 +1240,42 @@ CONFIG_PATA_IMX=y
 #
 # CONFIG_ATA_GENERIC is not set
 # CONFIG_PATA_LEGACY is not set
-# CONFIG_MD is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=y
+CONFIG_BCACHE=y
+# CONFIG_BCACHE_DEBUG is not set
+# CONFIG_BCACHE_EDEBUG is not set
+# CONFIG_BCACHE_CLOSURES_DEBUG is not set
+CONFIG_BLK_DEV_DM_BUILTIN=y
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=y
+CONFIG_DM_BIO_PRISON=y
+CONFIG_DM_PERSISTENT_DATA=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_THIN_PROVISIONING=y
+CONFIG_DM_DEBUG_BLOCK_STACK_TRACING=y
+# CONFIG_DM_CACHE is not set
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=y
+# CONFIG_DM_LOG_USERSPACE is not set
+CONFIG_DM_ZERO=y
+CONFIG_DM_MULTIPATH=y
+CONFIG_DM_MULTIPATH_QL=y
+CONFIG_DM_MULTIPATH_ST=y
+CONFIG_DM_DELAY=y
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=y
+CONFIG_DM_VERITY=y
 # CONFIG_TARGET_CORE is not set
 # CONFIG_FUSION is not set
 
@@ -1252,19 +1287,21 @@ CONFIG_PATA_IMX=y
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
 CONFIG_NET_CORE=y
-# CONFIG_BONDING is not set
+CONFIG_BONDING=y
-# CONFIG_DUMMY is not set
+CONFIG_DUMMY=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_NET_FC is not set
 CONFIG_MII=y
 # CONFIG_NET_TEAM is not set
-# CONFIG_MACVLAN is not set
+CONFIG_MACVLAN=y
-# CONFIG_VXLAN is not set
+CONFIG_MACVTAP=y
-# CONFIG_NETCONSOLE is not set
+CONFIG_VXLAN=y
-# CONFIG_NETPOLL is not set
+CONFIG_NETCONSOLE=y
-# CONFIG_NET_POLL_CONTROLLER is not set
+CONFIG_NETPOLL=y
-# CONFIG_TUN is not set
+# CONFIG_NETPOLL_TRAP is not set
-# CONFIG_VETH is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=y
+CONFIG_VETH=y
 # CONFIG_ARCNET is not set
 
 #
@@ -1408,10 +1445,10 @@ CONFIG_AT803X_PHY=y
 # CONFIG_CICADA_PHY is not set
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
+CONFIG_BROADCOM_PHY=y
 # CONFIG_BCM87XX_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
+CONFIG_REALTEK_PHY=y
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
@@ -1432,9 +1469,37 @@ CONFIG_AT803X_PHY=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_RTL8152 is not set
-# CONFIG_USB_USBNET is not set
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_AX88179_178A=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_CDC_NCM=y
+# CONFIG_USB_NET_CDC_MBIM is not set
+# CONFIG_USB_NET_DM9601 is not set
+CONFIG_USB_NET_SMSC75XX=y
+CONFIG_USB_NET_SMSC95XX=y
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_USB_NET_CX82310_ETH is not set
+# CONFIG_USB_NET_KALMIA is not set
+# CONFIG_USB_NET_QMI_WWAN is not set
 # CONFIG_USB_HSO is not set
-# CONFIG_USB_IPHETH is not set
+# CONFIG_USB_NET_INT51X1 is not set
+CONFIG_USB_IPHETH=y
+# CONFIG_USB_SIERRA_NET is not set
+# CONFIG_USB_VL600 is not set
 CONFIG_WLAN=y
 # CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_ATMEL is not set
@@ -1465,17 +1530,38 @@ CONFIG_ATH6KL_SDIO=m
 # CONFIG_ATH6KL_DEBUG is not set
 # CONFIG_AR5523 is not set
 # CONFIG_WIL6210 is not set
-# CONFIG_B43 is not set
+CONFIG_B43=m
-# CONFIG_B43LEGACY is not set
+CONFIG_B43_SSB=y
-CONFIG_BRCMUTIL=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+CONFIG_B43LEGACY_DEBUG=y
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
 # CONFIG_BRCMSMAC is not set
-CONFIG_BRCMFMAC=y
+CONFIG_BRCMFMAC=m
 CONFIG_BRCMFMAC_SDIO=y
-# CONFIG_BRCMFMAC_USB is not set
+CONFIG_BRCMFMAC_USB=y
 # CONFIG_BRCM_TRACING is not set
 # CONFIG_BRCMDBG is not set
 CONFIG_HOSTAP=y
-# CONFIG_HOSTAP_FIRMWARE is not set
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 # CONFIG_HOSTAP_PLX is not set
 # CONFIG_HOSTAP_PCI is not set
 # CONFIG_IPW2100 is not set
@@ -1506,7 +1592,15 @@ CONFIG_RT2X00_LIB_FIRMWARE=y
 CONFIG_RT2X00_LIB_CRYPTO=y
 CONFIG_RT2X00_LIB_LEDS=y
 # CONFIG_RT2X00_DEBUG is not set
-# CONFIG_RTLWIFI is not set
+CONFIG_RTLWIFI=m
+CONFIG_RTLWIFI_DEBUG=y
+CONFIG_RTL8192CE=m
+# CONFIG_RTL8192SE is not set
+# CONFIG_RTL8192DE is not set
+# CONFIG_RTL8723AE is not set
+# CONFIG_RTL8188EE is not set
+CONFIG_RTL8192CU=m
+CONFIG_RTL8192C_COMMON=m
 # CONFIG_WL_TI is not set
 # CONFIG_ZD1211RW is not set
 # CONFIG_MWIFIEX is not set
@@ -1536,7 +1630,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=m
+# CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
@@ -2064,7 +2158,19 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Sonics Silicon Backplane
 #
-# CONFIG_SSB is not set
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+# CONFIG_SSB_DRIVER_GPIO is not set
 CONFIG_BCMA_POSSIBLE=y
 
 #
@@ -2985,6 +3091,7 @@ CONFIG_USB_EHCI_PCI=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_IMX21_HCD is not set
+# CONFIG_USB_HCD_SSB is not set
 # CONFIG_USB_MUSB_HDRC is not set
 # CONFIG_USB_RENESAS_USBHS is not set
 
@@ -3033,7 +3140,76 @@ CONFIG_USB_CHIPIDEA_HOST=y
 #
 # USB port drivers
 #
-# CONFIG_USB_SERIAL is not set
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KLSI=m
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_METRO is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
+# CONFIG_USB_SERIAL_XSENS_MT is not set
+# CONFIG_USB_SERIAL_ZIO is not set
+# CONFIG_USB_SERIAL_WISHBONE is not set
+# CONFIG_USB_SERIAL_ZTE is not set
+# CONFIG_USB_SERIAL_SSU100 is not set
+CONFIG_USB_SERIAL_QT2=m
+# CONFIG_USB_SERIAL_DEBUG is not set
 
 #
 # USB Miscellaneous drivers
@@ -3058,7 +3234,7 @@ CONFIG_USB_CHIPIDEA_HOST=y
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_YUREX is not set
-# CONFIG_USB_EZUSB_FX2 is not set
+CONFIG_USB_EZUSB_FX2=m
 # CONFIG_USB_HSIC_USB3503 is not set
 CONFIG_USB_PHY=y
 # CONFIG_NOP_USB_XCEIV is not set
@@ -3379,6 +3555,7 @@ CONFIG_STAGING=y
 # CONFIG_TRANZPORT is not set
 # CONFIG_IDE_PHISON is not set
 # CONFIG_LINE6_USB is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
 # CONFIG_VT6655 is not set
 # CONFIG_VT6656 is not set
 # CONFIG_DX_SEP is not set
@@ -3595,6 +3772,7 @@ CONFIG_NFS_V4=y
 CONFIG_NFS_SWAP=y
 CONFIG_NFS_V4_1=y
 CONFIG_PNFS_FILE_LAYOUT=m
+CONFIG_PNFS_BLOCK=m
 CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
 CONFIG_ROOT_NFS=y
 CONFIG_NFS_USE_LEGACY_DNS=y
@@ -3708,6 +3886,7 @@ CONFIG_HAVE_DEBUG_KMEMLEAK=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_ATOMIC_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
@@ -3751,6 +3930,7 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_ASYNC_RAID6_TEST is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -3777,6 +3957,11 @@ CONFIG_SECURITYFS=y
 CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_DEFAULT_SECURITY=""
 CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
 CONFIG_CRYPTO=y
 
 #

core/linux-imx6-cubox-dt/mxc_hdmi-dont-require-cea-mode.patch

@@ -0,0 +1,25 @@
+This fixes problems with DVI monitors connected to the HDMI port
+via a DVI <-> HDMI cable. With dvi monitors, the list of CEA modes
+is always zero, preventing modes higher than 1024x768 to be used.
+This patch disables the CEA mode check.
+
+Upstream-Status: Pending
+
+diff --git a/drivers/video/mxc/mxc_hdmi.c b/drivers/video/mxc/mxc_hdmi.c
+index 544f352..fa67128 100644
+--- a/drivers/video/mxc/mxc_hdmi.c
++++ b/drivers/video/mxc/mxc_hdmi.c
+@@ -1804,10 +1804,10 @@ static void mxc_hdmi_edid_rebuild_modelist(struct mxc_hdmi *hdmi)
+ 		 */
+ 		mode = &hdmi->fbi->monspecs.modedb[i];
+ 
+-		if (!(mode->vmode & FB_VMODE_INTERLACED) &&
+-				(mxc_edid_mode_to_vic(mode) != 0)) {
++		if (!(mode->vmode & FB_VMODE_INTERLACED)) {
++			int vic = mxc_edid_mode_to_vic(mode);
+ 
+-			dev_dbg(&hdmi->pdev->dev, "Added mode %d:", i);
++			dev_dbg(&hdmi->pdev->dev, "%s: Added mode %d(VIC %u):", __func__, i, vic);
+ 			dev_dbg(&hdmi->pdev->dev,
+ 				"xres = %d, yres = %d, freq = %d, vmode = %d, flag = %d\n",
+ 				hdmi->fbi->monspecs.modedb[i].xres,

core/linux-kirkwood/PKGBUILD

@@ -7,7 +7,7 @@ buildarch=2
 pkgbase=linux-kirkwood
 _kernelname=${pkgbase#linux}
 _desc="Marvell Kirkwood"
-pkgver=3.13.5
+pkgver=3.13.6
 pkgrel=1
 cryptodev_commit=57b5544de80db85c8955499831fdaa30829db77a
 bfqver=v7r2
@@ -33,8 +33,8 @@ source=("ftp://ftp.kernel.org/pub/linux/kernel/v3.x/linux-${pkgver}.tar.xz"
         "http://algo.ing.unimo.it/people/paolo/disk_sched/patches/${pkgver:0:4}.0-${bfqver}/0002-block-introduce-the-BFQ-${bfqver}-I-O-sched-for-${pkgver:0:4}.patch"
         "http://algo.ing.unimo.it/people/paolo/disk_sched/patches/${pkgver:0:4}.0-${bfqver}/0003-block-bfq-add-Early-Queue-Merge-EQM-to-BFQ-${bfqver}-for-${pkgver:0:4}.0.patch")
 
-md5sums=('b9fa20262a7ecbbc3277aa2ee10412da'
+md5sums=('445aa27da818617409982f42902a6e41'
-         '1c87cbbc3355eb8741143b4595d0bb5e'
+         'adf8b4afb532b04cbd027a768ca2970f'
          '94cd91273bffe330fc8bc4cb2dd4ce9b'
          'SKIP'
          '65d5a4f313310bb2a732d022d51ea7e7'

core/linux-kirkwood/archlinuxarm.patch

@@ -4241,20 +4241,6 @@ diff -ruN a/arch/arm/mach-kirkwood/topkick-setup.c b/arch/arm/mach-kirkwood/topk
 +	.init_time      = kirkwood_timer_init,
 +	.restart	= kirkwood_restart,
 +MACHINE_END
-diff -ruN a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
---- a/arch/arm/plat-orion/common.c	2013-11-03 16:41:51.000000000 -0700
-+++ b/arch/arm/plat-orion/common.c	2013-11-08 01:39:48.788011812 -0700
-@@ -256,7 +256,9 @@
- /*****************************************************************************
-  * GE00
-  ****************************************************************************/
--struct mv643xx_eth_shared_platform_data orion_ge00_shared_data;
-+struct mv643xx_eth_shared_platform_data orion_ge00_shared_data = {
-+	.tx_csum_limit	= 1600,
-+};
- 
- static struct resource orion_ge00_shared_resources[] = {
- 	{
 diff -ruN a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
 --- a/drivers/ata/sata_mv.c	2013-11-03 16:41:51.000000000 -0700
 +++ b/drivers/ata/sata_mv.c	2013-11-08 01:39:48.868014917 -0700

core/linux-raspberrypi-latest/PKGBUILD

@@ -1,14 +1,15 @@
 # Maintainer: Dave Higham <pepedog@archlinuxarm.org>
 # Maintainer: Kevin Mihelich <kevin@archlinuxarm.org>
+# Maintainer: Oleg Rakhmanov <orakhmanov [at] gmail [dot] com>
 
 buildarch=18
 
 pkgbase=linux-raspberrypi-latest
-_commit=6a6b2b8d733a6359bbc2591e4b7377f333ddca82
+_commit=da28f2fa9ad9bb3fb3507e1c497b1d091cc54426
 _srcname=linux-${_commit}
 _kernelname=${pkgbase#linux}
 _desc="Raspberry Pi"
-pkgver=3.13.5
+pkgver=3.13.6
 pkgrel=1
 bfqver=v7r2
 uksmver="0.1.2.2"
@@ -32,7 +33,7 @@ source=("https://github.com/raspberrypi/linux/archive/${_commit}.tar.gz"
         "http://algo.ing.unimo.it/people/paolo/disk_sched/patches/${pkgver:0:4}.0-${bfqver}/0002-block-introduce-the-BFQ-${bfqver}-I-O-sched-for-${pkgver:0:4}.patch"
         "http://algo.ing.unimo.it/people/paolo/disk_sched/patches/${pkgver:0:4}.0-${bfqver}/0003-block-bfq-add-Early-Queue-Merge-EQM-to-BFQ-${bfqver}-for-${pkgver:0:4}.0.patch")
 
-md5sums=('0157c0303ae265e27c05ebc9e135245c'
+md5sums=('46fa850f6bbbf682a63e6e087bdda76c'
          'a61ef92d5aee828cf7b4fac1ff95108c'
          'c0d63f4d42fd334bf31e4f749d4694f3'
          '9335d1263fd426215db69841a380ea26'

core/linux-raspberrypi/PKGBUILD

@@ -4,11 +4,11 @@
 buildarch=18
 
 pkgbase=linux-raspberrypi
-_commit=4f27bd0d364ba6cb15a924c072300c18f28d7572
+_commit=a1baeb25b631e0c9ff696368d40da07dd0cf3fa4
 _srcname=linux-${_commit}
 _kernelname=${pkgbase#linux}
 _desc="Raspberry Pi"
-pkgver=3.10.32
+pkgver=3.10.33
 pkgrel=1
 arch=('arm armv6h')
 url="http://www.kernel.org/"
@@ -24,7 +24,7 @@ source=("https://github.com/raspberrypi/linux/archive/${_commit}.tar.gz"
         "git://git.code.sf.net/p/aufs/aufs3-standalone#branch=aufs${pkgver%.*}.x"
 	'rasclock-PCF2127.patch::http://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/patch/?id=18cb6368f0b0fc6a28bd49ee547b4f655db97fc3')
 
-md5sums=('878f9956297bf3aae1a1026a5e015c46'
+md5sums=('a4b99861de69fd3d69874644be337cf8'
          'faaeeb04891e260b3384d30a836ef2f2'
          '9d3c56a4b999c8bfbd4018089a62f662'
          '9335d1263fd426215db69841a380ea26'

extra/calligra/PKGBUILD

@@ -23,7 +23,7 @@ pkgname=('calligra-braindump'
          'calligra-stage'
          'calligra-words')
 pkgver=2.8.0
-pkgrel=1
+pkgrel=2
 arch=('i686' 'x86_64')
 url='http://www.calligra-suite.org/'
 license=('FDL1.2' 'GPL2' 'LGPL')
@@ -52,7 +52,8 @@ build() {
     -DCMAKE_BUILD_TYPE=Release \
     -DCMAKE_INSTALL_PREFIX=/usr \
     -DCMAKE_INSTALL_LIBDIR=lib \
-    -DBUILD_active=OFF
+    -DBUILD_active=OFF \
+    -DWITH_Soprano=OFF
   make
 }
 

extra/chromium/PKGBUILD

@@ -22,7 +22,7 @@
 buildarch=4
 
 pkgname=chromium
-pkgver=33.0.1750.146
+pkgver=33.0.1750.149
 pkgrel=1
 pkgdesc="The open-source project behind Google Chrome, an attempt at creating a safer, faster, and more stable browser"
 arch=('armv6h' 'armv7h')
@@ -47,7 +47,7 @@ source=(https://commondatastorage.googleapis.com/chromium-browser-official/$pkgn
         arm-webrtc-fix.patch
         skia.patch
         v6-ffmpeg.patch)
-sha256sums=('d5b0e7a0f086aac200493fe4e5849ca84e9e21f7770c5d5830060da9fc2c4a74'
+sha256sums=('165f6d3dd4cf936faf615f743baf2e668a259f970ceed654d2f73b390dad3084'
             '09bfac44104f4ccda4c228053f689c947b3e97da9a4ab6fa34ce061ee83d0322'
             '478340d5760a9bd6c549e19b1b5d1c5b4933ebf5f8cfb2b3e2d70d07443fe232'
             'a1145e83d775101b28dcdceb3ca076fc7e9a4b9f69a1a2236d0c97ad39afb3d3'

extra/gst-plugins-bad/PKGBUILD

@@ -6,7 +6,7 @@
 
 pkgname=gst-plugins-bad
 pkgver=1.2.3
-pkgrel=1
+pkgrel=2
 pkgdesc="GStreamer Multimedia Framework Bad Plugins"
 arch=('i686' 'x86_64')
 license=('LGPL')

extra/gstreamer0.10-bad/PKGBUILD

@@ -7,7 +7,7 @@
 pkgbase=gstreamer0.10-bad
 pkgname=('gstreamer0.10-bad' 'gstreamer0.10-bad-plugins')
 pkgver=0.10.23
-pkgrel=7
+pkgrel=8
 arch=('i686' 'x86_64')
 license=('LGPL' 'GPL')
 makedepends=('pkgconfig' 'gstreamer0.10-base>=0.10.36' 'xvidcore' 'libdca' 'bzip2' 'libdc1394' 'neon' 'faac' 'musicbrainz' 'faad2' 'libmms' 'libcdaudio' 'libmpcdec' 'mjpegtools' 'libdvdnav' 'libmodplug' 'jasper' 'liblrdf' 'libofa' 'soundtouch' 'libvdpau' 'schroedinger' 'libass' 'libvpx' 'gsm' 'libgme' 'rtmpdump' 'libsndfile' 'librsvg' 'wildmidi' 'opus' 'git' 'spandsp' 'celt')

extra/kdebindings-python/PKGBUILD

@@ -8,7 +8,7 @@ pkgbase=kdebindings-python
 pkgname=('kdebindings-python'
          'kdebindings-python2'
          'kdebindings-python-common')
-pkgver=4.12.2
+pkgver=4.12.3
 pkgrel=1
 url='https://projects.kde.org/projects/kde/kdebindings/pykde4'
 arch=('i686' 'x86_64')
@@ -18,7 +18,7 @@ makedepends=('cmake' 'automoc4' 'boost' 'kdepim-runtime' 'python2-pyqt4'
              'python-pyqt4' 'qscintilla' 'python2-sip' 'python-sip' 'mesa')
 source=("http://download.kde.org/stable/${pkgver}/src/pykde4-${pkgver}.tar.xz"
         "pykde4-4.10.0-arm-sip.patch")
-sha1sums=('11d0b3c11d02c3b0cb4006b2e004195697a2f598'
+sha1sums=('6e5cab25aee404469d6875d067bf2ad3382e4a1a'
           'f0798d25767768006d5f674049e51b2e39f9f4eb')
 
 prepare() {

extra/kdeedu-analitza/PKGBUILD

@@ -5,7 +5,7 @@
 #  - patch and cmake define to disable opengl for ARM
 
 pkgname=kdeedu-analitza
-pkgver=4.12.2
+pkgver=4.12.3
 pkgrel=1
 pkgdesc="A library to add mathematical features to your program"
 url="https://projects.kde.org/projects/kde/kdeedu/analitza"
@@ -16,7 +16,7 @@ depends=('kdebase-runtime')
 makedepends=('cmake' 'automoc4' 'glu')
 source=("http://download.kde.org/stable/${pkgver}/src/analitza-${pkgver}.tar.xz"
         'analitza-4.10.1-opengl_optional.patch')
-sha1sums=('7d06a5bb421ef5a2b5083a9f71bdc985746eee9b'
+sha1sums=('c241f01f7fc5e96df273331eb17f2c90f8a8ffee'
           '1b3a522acf87ed3dee51af4290a841645bf98a32')
 
 prepare() {

extra/kdeedu-kalgebra/PKGBUILD

@@ -5,7 +5,7 @@
 #  - patch and cmake define to disable opengl for ARM
 
 pkgname=kdeedu-kalgebra
-pkgver=4.12.2
+pkgver=4.12.3
 pkgrel=1
 pkgdesc="Graph Calculator"
 url="http://kde.org/applications/education/kalgebra/"
@@ -17,7 +17,7 @@ makedepends=('cmake' 'automoc4' 'glu')
 install=${pkgname}.install
 source=("http://download.kde.org/stable/${pkgver}/src/kalgebra-${pkgver}.tar.xz"
         "kalgebra-opengl_optional.patch")
-sha1sums=('d883a5c0388860a10bfa5b8df13797d688f571b5'
+sha1sums=('18867c9f6f81ef2e8953092072fa9949cca70a15'
           'ae1b75e5192f8519517134447b481421112a6dd7')
 
 build() {

extra/kdelibs/PKGBUILD

@@ -6,7 +6,7 @@
 #  - patch to fix unclickable plasmoid buttons on ARM
 
 pkgname=kdelibs
-pkgver=4.12.2
+pkgver=4.12.3
 pkgrel=1
 pkgdesc="KDE Core Libraries"
 arch=('i686' 'x86_64')
@@ -22,7 +22,7 @@ install=${pkgname}.install
 source=("http://download.kde.org/stable/${pkgver}/src/${pkgname}-${pkgver}.tar.xz"
         'kde-applications-menu.patch' 'archlinux-menu.patch' 'qt4.patch'
         'arm-coronaoffscreen-input-fixes.diff')
-sha1sums=('05e324af3752953ca637c2a51d989155f9f6bb8a'
+sha1sums=('57a9685d9c05f9304b0037f578bc13ca3371e74d'
           '86ee8c8660f19de8141ac99cd6943964d97a1ed7'
           '63a850ab4196b9d06934f2b4a13acd9f7739bc67'
           'ed1f57ee661e5c7440efcaba7e51d2554709701c'

extra/libpng/PKGBUILD

@@ -8,8 +8,8 @@
 #  - added --enable-arm-neon=no to configure
 
 pkgname=libpng
-pkgver=1.6.9
+pkgver=1.6.10
-_apngver=1.6.9
+_apngver=1.6.10
 pkgrel=1
 pkgdesc="A collection of routines used to create PNG format graphics files"
 arch=('i686' 'x86_64')
@@ -19,9 +19,9 @@ depends=('zlib' 'sh')
 options=('!libtool')
 source=(http://downloads.sourceforge.net/sourceforge/$pkgname/$pkgname-$pkgver.tar.xz{,.asc}
         http://downloads.sourceforge.net/sourceforge/libpng-apng/libpng-$_apngver-apng.patch.gz)
-md5sums=('14e037c5c9f1db16844760285ad5c2d6'
+md5sums=('5f414b20f683b1d96b163c89e3eff768'
          'SKIP'
-         'd784762a28f6a6c697a162873807f479')
+         '3404257f66d4a118b26ccc3fc4788810')
 
 prepare() {
   cd $pkgname-$pkgver

extra/mediastreamer/PKGBUILD

@@ -8,8 +8,8 @@
 #  - add --disable-strict to configure to remove -Werror
 
 pkgname=mediastreamer
-pkgver=2.9.0
+pkgver=2.10.0
-pkgrel=4
+pkgrel=2
 pkgdesc="A library written in C that allows you to create and run audio and video streams"
 arch=('i686' 'x86_64')
 url="http://www.linphone.org/"
@@ -17,9 +17,8 @@ license=('GPL')
 depends=('ortp' 'ffmpeg' 'libxv' 'libupnp')
 # xxd from Vim is needed to build
 makedepends=('intltool' 'vim')
-options=('!libtool')
 source=("http://download-mirror.savannah.gnu.org/releases/linphone/${pkgname}/${pkgname}-${pkgver}.tar.gz"{,.sig})
-md5sums=('f2ea0fe731a363749a81b6eaac22a62c'
+md5sums=('5a4e7545e212068534b56fdf41c961e9'
          'SKIP')
 
 build() {

extra/mesa/PKGBUILD

@@ -9,17 +9,17 @@
 
 pkgbase=mesa
 pkgname=('mesa' 'mesa-libgl')
-pkgver=10.0.3
+pkgver=10.1.0
-pkgrel=1
+pkgrel=2
 arch=('i686' 'x86_64')
-makedepends=('python2' 'libxml2' 'libx11' 'glproto' 'libdrm' 'dri2proto' 'libxxf86vm' 'libxdamage'
+makedepends=('python2' 'libxml2' 'libx11' 'glproto' 'libdrm' 'dri2proto' 'dri3proto' 'presentproto' 
-             'libvdpau' 'wayland' 'elfutils' 'llvm' 'systemd')
+             'libxshmfence' 'libxxf86vm'  'libxdamage' 'libvdpau' 'wayland' 'elfutils' 'llvm' 'systemd')
 url="http://mesa3d.sourceforge.net"
 license=('custom')
 options=('!libtool')
-source=(ftp://ftp.freedesktop.org/pub/mesa/${pkgver}/MesaLib-${pkgver}.tar.bz2
+source=(ftp://ftp.freedesktop.org/pub/mesa/10.1/MesaLib-${pkgver}.tar.bz2
         LICENSE)
-md5sums=('5f9f463ef08129f6762106b434910adb'
+md5sums=('3ec43f79dbcd9aa2a4a27bf1f51655b6'
          '5c65a0fe315dd347e09b1f2826a1df5a')
 
 build() {
@@ -46,7 +46,8 @@ build() {
     --enable-gles1 \
     --enable-gles2 \
     --enable-texture-float \
-    --enable-xa
+    --enable-xa \
+    --enable-dri3
     # --help
 
   make
@@ -58,17 +59,20 @@ build() {
 
 package_mesa() {
   pkgdesc="an open-source implementation of the OpenGL specification"
-  depends=('libdrm' 'libvdpau' 'wayland' 'libxxf86vm' 'libxdamage' 'systemd' 'elfutils' 'llvm-libs')
+  depends=('libdrm' 'libvdpau' 'wayland' 'libxxf86vm' 'libxdamage' 'libxshmfence' 'systemd' 'elfutils' 'llvm-libs')
   optdepends=('opengl-man-pages: for the OpenGL API man pages')
   provides=('libglapi' 'osmesa' 'libgbm' 'libgles' 'libegl' 'khrplatform-devel')
   conflicts=('libglapi' 'osmesa' 'libgbm')
   replaces=('libglapi' 'osmesa' 'libgbm' 'libgles' 'libegl' 'khrplatform-devel')
 
   mv -v ${srcdir}/fakeinstall/* ${pkgdir}
-  # rename libgl.so to not conflict with blobs - may break gl.pc ?
+  # rename libgl/EGL/glesv*.so to not conflict with blobs - may break .pc files ?
   mv ${pkgdir}/usr/lib/libGL.so.1.2.0 		${pkgdir}/usr/lib/mesa-libGL.so.1.2.0
-  ln -s mesa-libGL.so.1.2.0 ${pkgdir}/usr/lib/mesa-libGL.so.1
+  mv ${pkgdir}/usr/lib/libEGL.so.1.0.0 		${pkgdir}/usr/lib/mesa-libEGL.so.1.0.0
-  rm ${pkgdir}/usr/lib/libGL.so{,.1}
+  mv ${pkgdir}/usr/lib/libGLESv1_CM.so.1.1.0 	${pkgdir}/usr/lib/mesa-libGLESv1_CM.so.1.1.0
+  mv ${pkgdir}/usr/lib/libGLESv2.so.2.0.0 	${pkgdir}/usr/lib/mesa-libGLESv2.so.2.0.0
+
+  rm ${pkgdir}/usr/lib/lib{GL,EGL,GLESv1_CM,GLESv2}.so*
 
   install -m755 -d "${pkgdir}/usr/share/licenses/mesa"
   install -m644 "${srcdir}/LICENSE" "${pkgdir}/usr/share/licenses/mesa/"
@@ -87,6 +91,15 @@ package_mesa-libgl() {
   ln -s mesa-libGL.so.1.2.0 	    ${pkgdir}/usr/lib/libGL.so
   ln -s mesa-libGL.so.1.2.0         ${pkgdir}/usr/lib/libGL.so.1
   ln -s mesa-libGL.so.1.2.0         ${pkgdir}/usr/lib/libGL.so.1.2.0
+  ln -s mesa-libEGL.so.1.0.0        ${pkgdir}/usr/lib/libEGL.so
+  ln -s mesa-libEGL.so.1.0.0        ${pkgdir}/usr/lib/libEGL.so.1
+  ln -s mesa-libEGL.so.1.0.0        ${pkgdir}/usr/lib/libEGL.so.1.0.0
+  ln -s mesa-libGLESv1_CM.so.1.1.0  ${pkgdir}/usr/lib/libGLESv1_CM.so
+  ln -s mesa-libGLESv1_CM.so.1.1.0  ${pkgdir}/usr/lib/libGLESv1_CM.so.1
+  ln -s mesa-libGLESv1_CM.so.1.1.0  ${pkgdir}/usr/lib/libGLESv1_CM.so.1.1.0
+  ln -s mesa-libGLESv2.so.2.0.0     ${pkgdir}/usr/lib/libGLESv2.so
+  ln -s mesa-libGLESv2.so.2.0.0     ${pkgdir}/usr/lib/libGLESv2.so.2
+  ln -s mesa-libGLESv2.so.2.0.0     ${pkgdir}/usr/lib/libGLESv2.so.2.0.0
 
   install -m755 -d "${pkgdir}/usr/share/licenses/mesa-libgl"
   install -m644 "${srcdir}/LICENSE" "${pkgdir}/usr/share/licenses/mesa-libgl/"

extra/mono/PKGBUILD

@@ -7,8 +7,8 @@
 #    and using autogen.sh to rebuild for configure.in changes.
 
 pkgname=mono
-pkgver=3.2.3
+pkgver=3.2.8
-pkgrel=2
+pkgrel=1
 pkgdesc="Free implementation of the .NET platform including runtime and compiler"
 arch=(i686 x86_64)
 license=('GPL' 'LGPL2.1' 'MPL' 'custom:MITX11')
@@ -20,13 +20,13 @@ conflicts=('monodoc')
 source=(http://download.mono-project.com/sources/mono/${pkgname}-${pkgver}.tar.bz2
         mono.binfmt.d
 	sgen_fix.patch)
-md5sums=('a66c6309fad071e21f77f4c6b67a0f10'
+md5sums=('1075f99bd8a69890af9e30309728e684'
          'b9ef8a65fea497acf176cca16c1e2402'
          '8a700b94bff7a913f920e95890d2fb4c')
 
 build() {
   cd "${srcdir}/${pkgname}-${pkgver}"
-  patch -p1 < ../sgen_fix.patch
+
   # build mono
   if [ "$CARCH" = "armv7h" -o "$CARCH" = "armv6h" ]; then
     #Disabling alarm patch, arm support might be in now.
@@ -36,10 +36,10 @@ build() {
     sed -i 's/AM_PROG_CC_STDC/AC_PROG_CC/' configure.in
     sed -i 's/AUTOMAKE_OPTIONS = cygnus//' runtime/Makefile.am
     ./autogen.sh --prefix=/usr --sysconfdir=/etc \
-                 --with-fpu=VFP --bindir=/usr/bin --sbindir=/usr/bin --disable-static
+                 --with-fpu=VFP --bindir=/usr/bin --sbindir=/usr/bin --disable-static --disable-quiet-build  --disable-system-aot
   else
     sed -i 's/armv6=yes/armv6=no/' configure
-    ./configure --prefix=/usr --sysconfdir=/etc --bindir=/usr/bin --sbindir=/usr/bin --with-fpu=NONE --disable-static
+    ./configure --prefix=/usr --sysconfdir=/etc --bindir=/usr/bin --sbindir=/usr/bin --with-fpu=NONE --disable-static --disable-quiet-build  --disable-system-aot
   fi
   make
 

extra/net-snmp/PKGBUILD

@@ -7,7 +7,7 @@
 
 pkgname=net-snmp
 pkgver=5.7.2.1
-pkgrel=1
+pkgrel=2
 pkgdesc="A suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6"
 arch=('i686' 'x86_64')
 url="http://www.net-snmp.org/"
@@ -20,7 +20,7 @@ optdepends=('perl-term-readkey: for snmpcheck application'
 options=('!emptydirs' '!makeflags')
 source=(http://downloads.sourceforge.net/${pkgname}/${pkgname}-${pkgver}.tar.gz{,.asc}
         snmpd.service snmptrapd.service libnl32.patch ifmib.patch)
-sha1sums=('ea5b8952ca482eceac8cb1f3ffbac50e13c0a5b0'
+sha1sums=('815d4e5520a1ed96a27def33e7534b4190599f0f'
           'SKIP'
           '84e32c54d32e6b608747054e04a3ddfe6d6638cc'
           '0244e91c7baa0abebfb5c0560e8ce04c966c5992'
@@ -29,10 +29,12 @@ sha1sums=('ea5b8952ca482eceac8cb1f3ffbac50e13c0a5b0'
 
 prepare() {
   cd ${pkgname}-${pkgver}
-  make PERL_ARCHLIB=/usr/lib/perl5/core_perl PERL_INC=/usr/lib/perl5/core_perl/CORE distclean
+  #make PERL_ARCHLIB=/usr/lib/perl5/core_perl PERL_INC=/usr/lib/perl5/core_perl/CORE distclean
+
   # http://sourceforge.net/tracker/index.php?func=detail&aid=3250304&group_id=12694&atid=112694
   patch -Np1 -i "$srcdir/libnl32.patch"
   patch -Np1 -i "$srcdir/ifmib.patch"
+
   autoreconf -f -i
 }
 

extra/python/PKGBUILD

@@ -1,5 +1,6 @@
-# $Id: PKGBUILD 169007 2012-10-17 10:19:56Z allan $
+# $Id$
 # Maintainer: Angel Velasquez <angvp@archlinux.org>
+# Maintainer: Felix Yan <felixonmars@gmail.com>
 # Contributor: Stéphane Gaudreault <stephane@archlinux.org>
 # Contributor: Allan McRae <allan@archlinux.org>
 # Contributor: Jason Chu <jason@archlinux.org>
@@ -9,7 +10,7 @@
 #  - removed --with-valgrind from configure line
 
 pkgname=python
-pkgver=3.3.4
+pkgver=3.3.5
 pkgrel=1
 _pybasever=3.3
 pkgdesc="Next generation of the python high-level scripting language"
@@ -17,13 +18,16 @@ arch=('i686' 'x86_64')
 license=('custom')
 url="http://www.python.org/"
 depends=('expat' 'bzip2' 'gdbm' 'openssl' 'libffi' 'zlib')
-makedepends=('tk>=8.6.0' 'sqlite' 'bluez-libs')
+makedepends=('tk>=8.6.0' 'sqlite' 'bluez-libs' 'mpdecimal')
-optdepends=('tk: for tkinter' 'sqlite')
+optdepends=('sqlite'
+            'mpdecimal: for decimal'
+            'xz: for lzma'
+            'tk: for tkinter')
 options=('!makeflags')
 provides=('python3')
 replaces=('python3')
 source=(http://www.python.org/ftp/python/${pkgver%rc*}/Python-${pkgver}.tar.xz)
-sha1sums=('2c9586eeb4b6e45e9ebc28372c0856c709d9a522')
+sha1sums=('6683b26dd2cfd23af852abfcf1aedf25bbd44839')
 
 prepare() {
   cd "${srcdir}/Python-${pkgver}"
@@ -36,6 +40,7 @@ prepare() {
   rm -r Modules/expat
   rm -r Modules/zlib
   rm -r Modules/_ctypes/{darwin,libffi}*
+  rm -r Modules/_decimal/libmpdec
 }
 
 build() {
@@ -48,7 +53,8 @@ build() {
               --enable-ipv6 \
               --with-system-expat \
               --with-dbmliborder=gdbm:ndbm \
-              --with-system-ffi
+              --with-system-ffi \
+              --with-system-libmpdec
 
   make
 }

extra/qtcreator/PKGBUILD

@@ -10,8 +10,8 @@
 #  - patch to upgrade included botan version so it builds on ARM
 
 pkgname=qtcreator
-pkgver=3.0.1
+pkgver=3.1.0beta1
-_pkgver=3.0.1
+_pkgver=v3.1.0-beta1
 pkgrel=1
 pkgdesc='Lightweight, cross-platform integrated development environment'
 arch=('i686' 'x86_64')
@@ -29,7 +29,7 @@ optdepends=('qt5-doc: for the integrated Qt documentation'
             'bzr: for bazaar support'
             'valgrind: for analyze support')
 install=qtcreator.install
-source=("git://gitorious.org/qt-creator/qt-creator.git#tag=v${_pkgver}"
+source=("git://gitorious.org/qt-creator/qt-creator.git#tag=${_pkgver}"
         "git://gitorious.org/qt-labs/qbs.git"
         'qtcreator.desktop'
         'botan-upgrade.patch')

extra/ruby/0001-Fix-installing-gem-from-file-without-dependencies.patch

@@ -1,84 +0,0 @@
-From f5bbf838c8b13369a61c6756355305388df5824f Mon Sep 17 00:00:00 2001
-From: Tim Moore <tmoore@incrementalism.net>
-Date: Tue, 31 Dec 2013 17:39:45 +1100
-Subject: [PATCH] Fix installing gem from file without dependencies.
-
-Commit 9437ccc fixed the ability to install remote gems that was accidentally
-broken by d97fba1, but in the process accidentally broke installing from local
-files.
-
-This also changes the order to check for local first, to avoid unnecessary
-network requests in the case where the gem is local.
-
-Closes #760.
----
- lib/rubygems/commands/install_command.rb           | 20 ++++++++++++--------
- test/rubygems/test_gem_commands_install_command.rb | 14 ++++++++++++++
- 2 files changed, 26 insertions(+), 8 deletions(-)
-
-diff --git a/lib/rubygems/commands/install_command.rb b/lib/rubygems/commands/install_command.rb
-index 4485eb1..8219eef 100644
---- a/lib/rubygems/commands/install_command.rb
-+++ b/lib/rubygems/commands/install_command.rb
-@@ -228,7 +228,18 @@ to write the specification by hand.  For example:
-   def install_gem_without_dependencies name, req # :nodoc:
-     gem = nil
- 
--    if remote? then
-+    if local? then
-+      if name =~ /\.gem$/ and File.file? name then
-+        source = Gem::Source::SpecificFile.new name
-+        spec = source.spec
-+      else
-+        source = Gem::Source::Local.new
-+        spec = source.find_gem name, req
-+      end
-+      gem = source.download spec if spec
-+    end
-+
-+    if remote? and not gem then
-       dependency = Gem::Dependency.new name, req
-       dependency.prerelease = options[:prerelease]
- 
-@@ -236,13 +247,6 @@ to write the specification by hand.  For example:
-       gem = fetcher.download_to_cache dependency
-     end
- 
--    if local? and not gem then
--      source = Gem::Source::Local.new
--      spec = source.find_gem name, req
--
--      gem = source.download spec
--    end
--
-     inst = Gem::Installer.new gem, options
-     inst.install
- 
-diff --git a/test/rubygems/test_gem_commands_install_command.rb b/test/rubygems/test_gem_commands_install_command.rb
-index 76ea6b4..a5917c0 100644
---- a/test/rubygems/test_gem_commands_install_command.rb
-+++ b/test/rubygems/test_gem_commands_install_command.rb
-@@ -560,6 +560,20 @@ ERROR:  Possible alternatives: non_existent_with_hint
-     assert_equal %w[a-2], @cmd.installed_specs.map { |spec| spec.full_name }
-   end
- 
-+  def test_install_gem_ignore_dependencies_specific_file
-+    spec = quick_spec 'a', 2
-+
-+    util_build_gem spec
-+
-+    FileUtils.mv spec.cache_file, @tempdir
-+
-+    @cmd.options[:ignore_dependencies] = true
-+
-+    @cmd.install_gem File.join(@tempdir, spec.file_name), nil
-+
-+    assert_equal %w[a-2], @cmd.installed_specs.map { |spec| spec.full_name }
-+  end
-+
-   def test_parses_requirement_from_gemname
-     spec_fetcher do |fetcher|
-       fetcher.gem 'a', 2
--- 
-1.8.5.2
-

extra/ruby/0001-Fix-undeclared-identifier-error-by-using-the-actual-.patch

@@ -0,0 +1,26 @@
+From 4c4da3fc650a3595ecc06f49072f1ffae07db706 Mon Sep 17 00:00:00 2001
+From: Thomas Dziedzic <gostrc@gmail.com>
+Date: Sat, 1 Mar 2014 21:41:28 -0800
+Subject: [PATCH] Fix undeclared identifier error by using the actual type of
+ rl_pre_input_hook
+
+---
+ ext/readline/readline.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/ext/readline/readline.c b/ext/readline/readline.c
+index 659adb9..7bc0eed 100644
+--- a/ext/readline/readline.c
++++ b/ext/readline/readline.c
+@@ -1974,7 +1974,7 @@ Init_readline()
+ 
+     rl_attempted_completion_function = readline_attempted_completion_function;
+ #if defined(HAVE_RL_PRE_INPUT_HOOK)
+-    rl_pre_input_hook = (Function *)readline_pre_input_hook;
++    rl_pre_input_hook = (rl_hook_func_t *)readline_pre_input_hook;
+ #endif
+ #ifdef HAVE_RL_CATCH_SIGNALS
+     rl_catch_signals = 0;
+-- 
+1.9.0
+

extra/ruby/PKGBUILD

@@ -8,8 +8,8 @@
 #  - patch to fix running ruby on v5 (#705)
 
 pkgname=('ruby' 'ruby-docs')
-pkgver=2.1.0
+pkgver=2.1.1
-pkgrel=2.1
+pkgrel=1
 arch=('i686' 'x86_64')
 url='http://www.ruby-lang.org/en/'
 license=('BSD' 'custom')
@@ -18,25 +18,21 @@ license=('BSD' 'custom')
 # wait for upstream to start supporting tk 8.6
 makedepends=('gdbm' 'openssl' 'libffi' 'doxygen' 'graphviz' 'libyaml') # 'tk'
 options=('!emptydirs' '!makeflags' 'staticlibs')
-source=("http://cache.ruby-lang.org/pub/ruby/ruby-${pkgver}.tar.bz2"
+source=("http://cache.ruby-lang.org/pub/ruby/${pkgver:0:3}/ruby-${pkgver}.tar.bz2"
         'gemrc'
-        '0001-Fix-installing-gem-from-file-without-dependencies.patch'
+        '0001-Fix-undeclared-identifier-error-by-using-the-actual-.patch'
-        'changeset_r45225.diff'
         '0002-Use-only-unsigned-long-for-rb_serial_t.patch')
 md5sums=('1546eeb763ac7754365664be763a1e8f'
          '6fb8e7a09955e0f64be3158fb4a27e7a'
-         '61a1507f260866805fc6451c14733b25'
+         '0496e962e0ce11507b7577a8eb93af58'
-         '64839e135447accd2e0568c563e12d23'
          'f6f9c200c5e9afc4d5b21575da4821a2')
 
 build() {
   cd ruby-${pkgver}
 
-  # fixes https://github.com/rubygems/rubygems/issues/760
+  # readline 6.3 doesn't define Function anymore
-  patch -Np1 -i ${srcdir}/0001-Fix-installing-gem-from-file-without-dependencies.patch
+  # https://bugs.ruby-lang.org/issues/9578
-
+  patch -Np1 -i ${srcdir}/0001-Fix-undeclared-identifier-error-by-using-the-actual-.patch
-  # fixes https://bugs.ruby-lang.org/issues/9578
-  patch -Np0 -i ../changeset_r45225.diff
 
   # fixes https://bugs.ruby-lang.org/issues/9507
   [[ $CARCH == 'arm' ]] && patch -Np1 -i ../0002-Use-only-unsigned-long-for-rb_serial_t.patch

extra/ruby/changeset_r45225.diff

@@ -1,13 +0,0 @@
-Index: ext/readline/readline.c
-===================================================================
---- ext/readline/readline.c	(revision 45224)
-+++ ext/readline/readline.c	(revision 45225)
-@@ -1974,7 +1974,7 @@
- 
-     rl_attempted_completion_function = readline_attempted_completion_function;
- #if defined(HAVE_RL_PRE_INPUT_HOOK)
--    rl_pre_input_hook = (Function *)readline_pre_input_hook;
-+    rl_pre_input_hook = (rl_hook_func_t *)readline_pre_input_hook;
- #endif
- #ifdef HAVE_RL_CATCH_SIGNALS
-     rl_catch_signals = 0;

extra/texlive-bin/PKGBUILD

@@ -9,7 +9,7 @@
 
 pkgname=texlive-bin
 pkgver=2013.30973
-pkgrel=7
+pkgrel=8
 pkgdesc="TeX Live binaries"
 license=('GPL')
 arch=('i686' 'x86_64')

extra/webkitgtk/PKGBUILD

@@ -3,12 +3,12 @@
 
 # ALARM: Kevin Mihelich <kevin@archlinuxarm.org>
 #  - re-enabled --disable-silent-rules, needed for v5 and v6 to build
-#  - use --disable-jit for v5, uses incompatible ARM assembly
+#  - use --disable-jit to solve segfaults
 
 pkgbase=webkitgtk
 pkgname=(webkitgtk webkitgtk2)
 pkgver=2.2.5
-pkgrel=2
+pkgrel=2.1
 pkgdesc="GTK+ Web content engine library"
 arch=(i686 x86_64)
 url="http://webkitgtk.org/"
@@ -28,12 +28,10 @@ _build() (
   _ver="$1"; shift
   cd build-${_ver}
 
-  [[ $CARCH == 'arm' ]] && CONFIG='--disable-jit'
-
   ../$pkgbase-$pkgver/configure --prefix=/usr \
     --libexecdir=/usr/lib/webkit${_ver} \
-    --enable-introspection \
+    --enable-introspection --disable-jit \
-    "$@" $CONFIG
+    "$@"
 
   # https://bugzilla.gnome.org/show_bug.cgi?id=655517
   sed -i 's/ -shared / -Wl,-O1,--as-needed\0/g' libtool