core/linux-armv7-rc to 4.15.rc9-1

core/linux-armv7-rc/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch

@@ -1,7 +1,7 @@
-From 0b5434bba0eebdd9035b0d0184259006b4d5b8a0 Mon Sep 17 00:00:00 2001
+From 3d479a6cad6ee5f618ab002a35688ac33ef7b9ac Mon Sep 17 00:00:00 2001
 From: Willy Tarreau <w@xxxxxx>
 Date: Sun, 2 Dec 2012 19:59:28 +0100
-Subject: [PATCH 01/10] ARM: atags: add support for Marvell's u-boot
+Subject: [PATCH 1/9] ARM: atags: add support for Marvell's u-boot
 
 Marvell uses a specific atag in its u-boot which includes among other
 information the MAC addresses for up to 4 network interfaces.

core/linux-armv7-rc/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch

@@ -1,8 +1,8 @@
-From 0f02774278458184fe86e3400a128a390ca57ba8 Mon Sep 17 00:00:00 2001
+From 8ec093bead331ec76f615d82faeac4c0e9345a34 Mon Sep 17 00:00:00 2001
 From: Willy Tarreau <w@xxxxxx>
 Date: Sun, 2 Dec 2012 19:56:58 +0100
-Subject: [PATCH 02/10] ARM: atags/fdt: retrieve MAC addresses from Marvell
+Subject: [PATCH 2/9] ARM: atags/fdt: retrieve MAC addresses from Marvell boot
- boot loader
+ loader
 
 The atags are parsed and if a Marvell atag is found, up to 4 MAC
 addresses are extracted there and assigned to node aliases eth0..3

core/linux-armv7-rc/0003-SMILE-Plug-device-tree-file.patch

@@ -1,7 +1,7 @@
-From 148f1387b852abf522bbcc6b770b663d6807012b Mon Sep 17 00:00:00 2001
+From 1db539cd4527e19bd48e08e5cb608373b3ccabd0 Mon Sep 17 00:00:00 2001
 From: Kevin Mihelich <kevin@archlinuxarm.org>
 Date: Fri, 5 Sep 2014 15:41:19 -0600
-Subject: [PATCH 03/10] SMILE Plug device tree file
+Subject: [PATCH 3/9] SMILE Plug device tree file
 
 This adds a dts file for the SMILE Plug, which only differs from the Mirabox
 dts with the LED definitions.

core/linux-armv7-rc/0004-fix-mvsdio-eMMC-timing.patch

@@ -1,7 +1,7 @@
-From c018608caafda694294105dcacf4c0cba5a3b14b Mon Sep 17 00:00:00 2001
+From 854e80dbac1cb0a665dc856fdf918085d7d599ae Mon Sep 17 00:00:00 2001
 From: Kevin Mihelich <kevin@archlinuxarm.org>
 Date: Fri, 5 Sep 2014 15:43:56 -0600
-Subject: [PATCH 04/10] fix mvsdio eMMC timing
+Subject: [PATCH 4/9] fix mvsdio eMMC timing
 
 These changes from Globalscale change the MMC timing to allow the eMMC versions
 of the Mirabox and SMILE Plug to work.

core/linux-armv7-rc/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch

@@ -1,8 +1,7 @@
-From 6c29f065fb016ebe3211b12a3251aeaef7e6c46c Mon Sep 17 00:00:00 2001
+From 86bded5995f2dd4fab28d7b8d63a4caa4db107ed Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Tue, 18 Feb 2014 01:43:50 -0300
-Subject: [PATCH 05/10] net/smsc95xx: Allow mac address to be set as a
+Subject: [PATCH 5/9] net/smsc95xx: Allow mac address to be set as a parameter
- parameter
 
 ---
  drivers/net/usb/smsc95xx.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++

core/linux-armv7-rc/0006-set-default-cubietruck-led-triggers.patch

@@ -1,7 +1,7 @@
-From 3df85aa11ccdf4a43e8869ca48d2a5e76edc46f0 Mon Sep 17 00:00:00 2001
+From 4b8a8edc859c1ce4131958c798fbfad5efff90dd Mon Sep 17 00:00:00 2001
 From: Kevin Mihelich <kevin@archlinuxarm.org>
 Date: Sat, 14 Feb 2015 12:32:27 +0100
-Subject: [PATCH 06/10] set default cubietruck led triggers
+Subject: [PATCH 6/9] set default cubietruck led triggers
 
 Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
 ---

core/linux-armv7-rc/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch

@@ -1,7 +1,7 @@
-From 0ce1c4867c66f0ee470904e9090a6c3d207b0b25 Mon Sep 17 00:00:00 2001
+From f11286dd3d8513aaa1bb98f4a5eb3b167b3156a1 Mon Sep 17 00:00:00 2001
 From: Kevin Mihelich <kevin@archlinuxarm.org>
 Date: Thu, 11 Aug 2016 00:42:37 -0600
-Subject: [PATCH 07/10] exynos4412-odroid: set higher minimum buck2 regulator
+Subject: [PATCH 7/9] exynos4412-odroid: set higher minimum buck2 regulator
  voltage
 
 Set a higher minimum voltage to help reboot issue.

core/linux-armv7-rc/0008-disable-USB3-port-on-ODROID-XU.patch

@@ -1,7 +1,7 @@
-From 7de44316a3c5f6c6121101fdbc3d28f8f90224ea Mon Sep 17 00:00:00 2001
+From 7468a7c2c552024e2b243fe655b953e292cb111e Mon Sep 17 00:00:00 2001
 From: Kevin Mihelich <kevin@archlinuxarm.org>
 Date: Sat, 25 Feb 2017 19:39:51 -0700
-Subject: [PATCH 08/10] disable USB3 port on ODROID-XU
+Subject: [PATCH 8/9] disable USB3 port on ODROID-XU
 
 Ports report over-current condition and are non-operable.
 

core/linux-armv7-rc/0009-ARM-dove-enable-ethernet-on-D3Plug.patch

@@ -1,7 +1,7 @@
-From d1950bd64d45bb3e2dbca710b5aa68dbd3225ca3 Mon Sep 17 00:00:00 2001
+From ecfc4a9cba2d67cd44f9a66b0777d44dd711c498 Mon Sep 17 00:00:00 2001
 From: Kevin Mihelich <kevin@archlinuxarm.org>
 Date: Sun, 7 May 2017 13:32:25 -0600
-Subject: [PATCH 09/10] ARM: dove: enable ethernet on D3Plug
+Subject: [PATCH 9/9] ARM: dove: enable ethernet on D3Plug
 
 Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
 ---

core/linux-armv7-rc/0010-phy-work-around-phys-references-to-usb-nop-xceiv-dev.patch

@@ -1,81 +0,0 @@
-From a8a2aa5970ad5d692db580f616ce4a3a1e7a7d18 Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Fri, 12 Jan 2018 11:12:05 +0100
-Subject: [PATCH 10/10] phy: work around 'phys' references to usb-nop-xceiv
- devices
-
-Stefan Wahren reports a problem with a warning fix that was merged
-for v4.15: we had lots of device nodes with a 'phys' property pointing
-to a device node that is not compliant with the binding documented in
-Documentation/devicetree/bindings/phy/phy-bindings.txt
-
-This generally works because USB HCD drivers that support both the generic
-phy subsystem and the older usb-phy subsystem ignore most errors from
-phy_get() and related calls and then use the usb-phy driver instead.
-
-However, it turns out that making the usb-nop-xceiv device compatible with
-the generic-phy binding changes the phy_get() return code from -EINVAL to
--EPROBE_DEFER, and the dwc2 usb controller driver for bcm2835 now returns
--EPROBE_DEFER from its probe function rather than ignoring the failure,
-breaking all USB support on raspberry-pi when CONFIG_GENERIC_PHY is
-enabled. The same code is used in the dwc3 driver and the usb_add_hcd()
-function, so a reasonable assumption would be that many other platforms
-are affected as well.
-
-I have reviewed all the related patches and concluded that "usb-nop-xceiv"
-is the only USB phy that is affected by the change, and since it is by far
-the most commonly referenced phy, all the other USB phy drivers appear
-to be used in ways that are are either safe in DT (they don't use the
-'phys' property), or in the driver (they already ignore -EPROBE_DEFER
-from generic-phy when usb-phy is available).
-
-To work around the problem, this adds a special case to _of_phy_get()
-so we ignore any PHY node that is compatible with "usb-nop-xceiv",
-as we know that this can never load no matter how much we defer. In the
-future, we might implement a generic-phy driver for "usb-nop-xceiv"
-and then remove this workaround.
-
-Since we generally want older kernels to also want to work with the
-fixed devicetree files, it would be good to backport the patch into
-stable kernels as well (3.13+ are possibly affected), even though they
-don't contain any of the patches that may have caused regressions.
-
-Fixes: 014d6da6cb25 ARM: dts: bcm283x: Fix DTC warnings about missing phy-cells
-Fixes: c5bbf358b790 arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv
-Fixes: 44e5dced2ef6 arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv
-Fixes: f568f6f554b8 ARM: dts: omap: Add missing #phy-cells to usb-nop-xceiv
-Fixes: d745d5f277bf ARM: dts: imx51-zii-rdu1: Add missing #phy-cells to usb-nop-xceiv
-Fixes: 915fbe59cbf2 ARM: dts: imx: Add missing #phy-cells to usb-nop-xceiv
-Link: https://marc.info/?l=linux-usb&m=151518314314753&w=2
-Link: https://patchwork.kernel.org/patch/10158145/
-Cc: stable@vger.kernel.org
-Cc: Stefan Wahren <stefan.wahren@i2se.com>
-Cc: Felipe Balbi <balbi@kernel.org>
-Cc: Eric Anholt <eric@anholt.net>
-Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
-Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
-Acked-by: Rob Herring <robh@kernel.org>
----
- drivers/phy/phy-core.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
-index b4964b067aec..8f6e8e28996d 100644
---- a/drivers/phy/phy-core.c
-+++ b/drivers/phy/phy-core.c
-@@ -410,6 +410,10 @@ static struct phy *_of_phy_get(struct device_node *np, int index)
- 	if (ret)
- 		return ERR_PTR(-ENODEV);
- 
-+	/* This phy type handled by the usb-phy subsystem for now */
-+	if (of_device_is_compatible(args.np, "usb-nop-xceiv"))
-+		return ERR_PTR(-ENODEV);
-+
- 	mutex_lock(&phy_provider_mutex);
- 	phy_provider = of_phy_provider_lookup(args.np);
- 	if (IS_ERR(phy_provider) || !try_module_get(phy_provider->owner)) {
--- 
-2.15.0
-

core/linux-armv7-rc/PKGBUILD

@@ -4,7 +4,7 @@
 buildarch=4
 
 _rcver=4.15
-_rcrel=8
+_rcrel=9
 _rcnrel=armv7-x0
 
 pkgbase=linux-armv7-rc
@@ -29,26 +29,24 @@ source=("https://git.kernel.org/torvalds/t/${_srcname}.tar.gz"
         '0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch'
         '0008-disable-USB3-port-on-ODROID-XU.patch'
         '0009-ARM-dove-enable-ethernet-on-D3Plug.patch'
-        '0010-phy-work-around-phys-references-to-usb-nop-xceiv-dev.patch'
         'config'
         'kernel.its'
         'kernel.keyblock'
         'kernel_data_key.vbprivk'
         'linux.preset'
         '99-linux.hook')
-md5sums=('ad8277e87079747f0e352f1fba151d38'
+md5sums=('e2fab4831e54e1a188a68d431e63f540'
-         '51d94dedeccf5cd50b730f7a74095508'
+         'a4e873983a34620a0bfef176699182bd'
-         '13e49c73b6f8ada432b295ee3942cfbc'
+         '7fe0862ef33a0c05a7cfc586a4f1dfe1'
-         'd7c27c5fb5af85b5f964cc4e62b498b2'
+         '6a4f027a2558741fa932b2bbc0de27eb'
-         '3f3c1b782f6f39bed4b56b63e84436bd'
+         'd5759bba814aaf3fe0ec4d230cca28e9'
-         'db48b4221f89e01c745b8a556bec4a4d'
+         '2bb3aff035d47e86654c4e17cf8b220a'
-         '35f0c38a1a6705aec91907422fea125b'
+         '1681a4a5f47477ab6e02b0f17021482f'
-         'fbcc64d159c6d385cc9bea9d8517c816'
+         '13878f989bf23cf92ec3136121948fa4'
-         'd8ef99d2fbab82b3f611ac168f2ee079'
+         '3ae78bd2c88a5beaf85d3f9ff53289d0'
-         '61fa5c2852492dc079e20da535e59811'
+         'd7aee2b9e035fbc7e8ed2142251cba05'
-         '04a7206ed51c3359154f5acaff0b95f4'
+         'ce8d5eed57e2841ae3021dd375b9ca8a'
-         '732d220643981cbcd77b8f499667a517'
+         'd4a71f37c2df33af10c4e5a206a0f6e1'
-         '6dba81bd6483c3d06e2a594b60fe4589'
          '4f2379ed84258050edb858ee8d281678'
          '61c5ff73c136ed07a7aadbf58db3d96a'
          '584777ae88bce2c5659960151b64c7d8'
@@ -72,7 +70,6 @@ prepare() {
   git apply ../0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch
   git apply ../0008-disable-USB3-port-on-ODROID-XU.patch
   git apply ../0009-ARM-dove-enable-ethernet-on-D3Plug.patch
-  git apply ../0010-phy-work-around-phys-references-to-usb-nop-xceiv-dev.patch
 
   cat "${srcdir}/config" > ./.config