From fc5fb94bffb4d193d774ea0c206b5b1aadeb7f44 Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Fri, 15 Apr 2016 00:04:15 +0000 Subject: [PATCH] core/linux-raspberrypi to 4.4.7-2 --- core/linux-raspberrypi/PKGBUILD | 12 +-- core/linux-raspberrypi/config.txt | 128 +----------------------------- core/linux-raspberrypi/config.v6 | 4 +- core/linux-raspberrypi/config.v7 | 4 +- 4 files changed, 13 insertions(+), 135 deletions(-) diff --git a/core/linux-raspberrypi/PKGBUILD b/core/linux-raspberrypi/PKGBUILD index be71a44ec..fa0e5297c 100644 --- a/core/linux-raspberrypi/PKGBUILD +++ b/core/linux-raspberrypi/PKGBUILD @@ -7,12 +7,12 @@ buildarch=20 pkgbase=linux-raspberrypi -_commit=af9619cc3b0e8f8dc1cb2aebe4c95c86d41d90e9 +_commit=e3a6cfd26be351d586e48e960ae787463e10db4f _srcname=linux-${_commit} _kernelname=${pkgbase#linux} _desc="Raspberry Pi" pkgver=4.4.7 -pkgrel=1 +pkgrel=2 bfqver=v7r11 arch=('armv6h' 'armv7h') url="http://www.kernel.org/" @@ -29,17 +29,17 @@ source=("https://github.com/raspberrypi/linux/archive/${_commit}.tar.gz" 'cmdline.txt' 'config.v6' 'config.v7') -md5sums=('4d836f9dfc0ad16dd278dd73f7dee6aa' +md5sums=('a305046d25e6254f4b17b10abcaf6f03' 'SKIP' 'c1d7fcfe88edb658375089c0a9cc1811' '953133d5e387de2ad79ac0ae5c27cb6b' 'f0387e673975e9f2a5e05136948edece' '4a410ab9a1eefe82e158d36df02b3589' '8c3cb6d8f0609b43f09d083b4006ec5a' - '9a3c82da627b317ec79c37fd6afba569' + 'f95eb9c22c18722e30fc28a5640aeba5' '60bc3624123c183305677097bcd56212' - '9db2e56d1d3e883fcfb91dd5f5207225' - '3ea8449bd6a2d41a409833bb905a3c42') + '4c42852ae457d8e3dc47b65a3b893c96' + 'f2f6e1a6339fabadce29721e01768282') prepare() { cd "${srcdir}/${_srcname}" diff --git a/core/linux-raspberrypi/config.txt b/core/linux-raspberrypi/config.txt index 8270c9bb7..e8e83a11e 100644 --- a/core/linux-raspberrypi/config.txt +++ b/core/linux-raspberrypi/config.txt @@ -1,129 +1,3 @@ -# Uncomment some or all of these to enable the optional hardware interfaces -# Params: -# i2c_arm Set to "on" to enable the ARM's i2c interface -# (default "off") -# i2c_vc Set to "on" to enable the i2c interface -# usually reserved for the VideoCore processor -# (default "off") -# i2c_arm_baudrate Set the baudrate of the ARM's i2c interface -# (default "100000") -# i2c_vc_baudrate Set the baudrate of the VideoCore i2c interface -# (default "100000") -# i2c_baudrate An alias for i2c_arm_baudrate -# i2s Set to "on" to enable the i2s interface -# (default "off") -# spi Set to "on" to enable the spi interfaces -# (default "off") -# act_led_trigger Choose which activity the LED tracks. -# Use "heartbeat" for a nice load indicator. -# (default "mmc") -# act_led_activelow Set to "on" to invert the sense of the LED -# (default "off") -# act_led_gpio Set which GPIO to use for the activity LED -# (in case you want to connect it to an external -# device) -# (default "16" on a non-Plus board, "47" on a -# Plus or Pi 2) -# pwr_led_trigger -# pwr_led_activelow -# pwr_led_gpio -# As for act_led_*, but using the PWR LED. -# Not available on Model A/B boards. -# N.B. It is recommended to only enable those interfaces that are needed. -# Leaving all interfaces enabled can lead to unwanted behaviour (i2c_vc -# interfering with Pi Camera, I2S and SPI hogging GPIO pins, etc.) -# Note also that i2c, i2c_arm and i2c_vc are aliases for the physical -# interfaces i2c0 and i2c1. Use of the numeric variants is still possible -# but deprecated because the ARM/VC assignments differ between board -# revisions. The same board-specific mapping applies to i2c_baudrate, -# and the other i2c baudrate parameters. - -#device_tree_param=i2c_arm=on -#device_tree_param=i2c_vc=on -#device_tree_param=i2s=on -#device_tree_param=spi=on -#device_tree_param=act_led_trigger=mmc - -# -# See /boot/overlays/README for a detailed list and description of additional -# overlays and their configuration options. -# - -# Uncomment if you get no picture on HDMI for a default "safe" mode -#hdmi_safe=1 - -# Uncomment this if your display has a black border of unused pixels visible -# and your display can output without overscan -#disable_overscan=1 - -# Uncomment the following to adjust overscan. Use positive numbers if console -# goes off screen, and negative if there is too much border -#overscan_left=16 -#overscan_right=16 -#overscan_top=16 -#overscan_bottom=16 - -# Uncomment to force a console size. By default it will be display's size minus -# overscan. -#framebuffer_width=1280 -#framebuffer_height=720 - -# Uncomment if hdmi display is not detected and composite is being output -#hdmi_force_hotplug=1 - -# Uncomment to force a specific HDMI mode (this will force VGA) -#hdmi_group=1 -#hdmi_mode=1 - -# Uncomment to force a HDMI mode rather than DVI. This can make audio work in -# DMT (computer monitor) modes -#hdmi_drive=2 - -# Uncomment to set monitor mode to DMT -#hdmi_group=2 - -# Uncomment to increase signal to HDMI, if you have interference, blanking, or -# no display -#config_hdmi_boost=4 - -# Uncomment for composite PAL -#sdtv_mode=2 - -# Uncomment to overclock the ARM core. 700 MHz is the default. -#arm_freq=800 - -# for more options see http://elinux.org/RPi_config.txt - -## Some over clocking settings, governor already set to ondemand - -##None -#arm_freq=700 -#core_freq=250 -#sdram_freq=400 -#over_voltage=0 - -##Modest -#arm_freq=800 -#core_freq=300 -#sdram_freq=400 -#over_voltage=0 - -##Medium -#arm_freq=900 -#core_freq=333 -#sdram_freq=450 -#over_voltage=2 - -##High -#arm_freq=950 -#core_freq=450 -#sdram_freq=450 -#over_voltage=6 - -##Turbo -#arm_freq=1000 -#core_freq=500 -#sdram_freq=500 -#over_voltage=6 +# See /boot/overlays/README for all available options gpu_mem=64 diff --git a/core/linux-raspberrypi/config.v6 b/core/linux-raspberrypi/config.v6 index 845e7edd7..ce75af61b 100644 --- a/core/linux-raspberrypi/config.v6 +++ b/core/linux-raspberrypi/config.v6 @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/arm 4.4.6-1 Kernel Configuration +# Linux/arm 4.4.7-2 Kernel Configuration # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -3472,6 +3472,8 @@ CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m CONFIG_SND_BCM2708_SOC_RPI_DAC=m CONFIG_SND_BCM2708_SOC_RPI_PROTO=m +CONFIG_SND_BCM2708_SOC_BOOMBERRY_DAC=m +CONFIG_SND_BCM2708_SOC_BOOMBERRY_DIGI=m CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m CONFIG_SND_BCM2708_SOC_RASPIDAC3=m # CONFIG_SND_DESIGNWARE_I2S is not set diff --git a/core/linux-raspberrypi/config.v7 b/core/linux-raspberrypi/config.v7 index abda5f1d9..e3164c915 100644 --- a/core/linux-raspberrypi/config.v7 +++ b/core/linux-raspberrypi/config.v7 @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/arm 4.4.6-1 Kernel Configuration +# Linux/arm 4.4.7-2 Kernel Configuration # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -3569,6 +3569,8 @@ CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m CONFIG_SND_BCM2708_SOC_RPI_DAC=m CONFIG_SND_BCM2708_SOC_RPI_PROTO=m +CONFIG_SND_BCM2708_SOC_BOOMBERRY_DAC=m +CONFIG_SND_BCM2708_SOC_BOOMBERRY_DIGI=m CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m CONFIG_SND_BCM2708_SOC_RASPIDAC3=m # CONFIG_SND_DESIGNWARE_I2S is not set