linux-usbarmory: kernel, limited modules

2024-11-28 22:57:37 +00:00 · 2015-03-27 00:36:42 -04:00 · 2015-03-27 00:36:42 -04:00 · ff204f3186
commit ff204f3186
parent 4052168510
8 changed files with 3776 additions and 0 deletions
--- a/core/linux-usbarmory/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch
+++ b/core/linux-usbarmory/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch
@ -0,0 +1,51 @@
+From 7ba704a48c49367dda65d1297a4c06a1eb4e8c9c Mon Sep 17 00:00:00 2001
+From: Willy Tarreau <w@xxxxxx>
+Date: Sun, 2 Dec 2012 19:59:28 +0100
+Subject: [PATCH 1/5] ARM: atags: add support for Marvell's u-boot
+
+Marvell uses a specific atag in its u-boot which includes among other
+information the MAC addresses for up to 4 network interfaces.
+
+Signed-off-by: Willy Tarreau <w@xxxxxx>
+---
+ arch/arm/include/uapi/asm/setup.h | 17 +++++++++++++++++
+ 1 file changed, 17 insertions(+)
+
+diff --git a/arch/arm/include/uapi/asm/setup.h b/arch/arm/include/uapi/asm/setup.h
+index 979ff40..d1d0c19 100644
+--- a/arch/arm/include/uapi/asm/setup.h
+++ b/arch/arm/include/uapi/asm/setup.h
+@@ -143,6 +143,18 @@ struct tag_memclk {
+ 	__u32 fmemclk;
+ };
+ 
+/* Marvell uboot parameters */
+#define ATAG_MV_UBOOT          0x41000403
+struct tag_mv_uboot {
+	__u32 uboot_version;
+	__u32 tclk;
+	__u32 sysclk;
+	__u32 isUsbHost;
+	__u8  macAddr[4][6];
+	__u16 mtu[4];
+	__u32 nand_ecc;
+};
+
+ struct tag {
+ 	struct tag_header hdr;
+ 	union {
+@@ -165,6 +177,11 @@ struct tag {
+ 		 * DC21285 specific
+ 		 */
+ 		struct tag_memclk	memclk;
+
+		/*
+		 * Marvell specific
+		 */
+		struct tag_mv_uboot	mv_uboot;
+ 	} u;
+ };
+ 
+-- 
+2.3.0
+
--- a/core/linux-usbarmory/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch
+++ b/core/linux-usbarmory/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch
@ -0,0 +1,47 @@
+From efad5852f3be8cc444662c3a1ecf22edd38427d4 Mon Sep 17 00:00:00 2001
+From: Willy Tarreau <w@xxxxxx>
+Date: Sun, 2 Dec 2012 19:56:58 +0100
+Subject: [PATCH 2/5] ARM: atags/fdt: retrieve MAC addresses from Marvell boot
+ loader
+
+The atags are parsed and if a Marvell atag is found, up to 4 MAC
+addresses are extracted there and assigned to node aliases eth0..3
+with the name "mac-address".
+
+This was tested on my Mirabox and the two NICs had their correct
+address set.
+
+Signed-off-by: Willy Tarreau <w@xxxxxx>
+---
+ arch/arm/boot/compressed/atags_to_fdt.c | 8 +++++++-
+ 1 file changed, 7 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
+index 9448aa0..ac7b6ae 100644
+--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
+@@ -18,7 +18,7 @@ static int node_offset(void *fdt, const char *node_path)
+ }
+ 
+ static int setprop(void *fdt, const char *node_path, const char *property,
+-		   uint32_t *val_array, int size)
+		   void *val_array, int size)
+ {
+ 	int offset = node_offset(fdt, node_path);
+ 	if (offset < 0)
+@@ -179,6 +179,12 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
+ 					initrd_start);
+ 			setprop_cell(fdt, "/chosen", "linux,initrd-end",
+ 					initrd_start + initrd_size);
+		} else if (atag->hdr.tag == ATAG_MV_UBOOT) {
+			/* This ATAG provides up to 4 MAC addresses */
+			setprop(fdt, "eth0", "mac-address", atag->u.mv_uboot.macAddr[0], 6);
+			setprop(fdt, "eth1", "mac-address", atag->u.mv_uboot.macAddr[1], 6);
+			setprop(fdt, "eth2", "mac-address", atag->u.mv_uboot.macAddr[2], 6);
+			setprop(fdt, "eth3", "mac-address", atag->u.mv_uboot.macAddr[3], 6);
+ 		}
+ 	}
+ 
+-- 
+2.3.0
+
--- a/core/linux-usbarmory/0003-SMILE-Plug-device-tree-file.patch
+++ b/core/linux-usbarmory/0003-SMILE-Plug-device-tree-file.patch
@ -0,0 +1,209 @@
+From 9a1d31f61b309e8a4ebc6a4c85154f20b94af3e2 Mon Sep 17 00:00:00 2001
+From: Kevin Mihelich <kevin@archlinuxarm.org>
+Date: Fri, 5 Sep 2014 15:41:19 -0600
+Subject: [PATCH 3/5] SMILE Plug device tree file
+
+This adds a dts file for the SMILE Plug, which only differs from the Mirabox
+dts with the LED definitions.
+
+Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
+---
+ arch/arm/boot/dts/Makefile                 |   1 +
+ arch/arm/boot/dts/armada-370-smileplug.dts | 173 +++++++++++++++++++++++++++++
+ 2 files changed, 174 insertions(+)
+ create mode 100644 arch/arm/boot/dts/armada-370-smileplug.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 91bd5bd..22618d7 100644
+--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
+@@ -527,6 +527,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
+ dtb-$(CONFIG_MACH_ARMADA_370) += \
+ 	armada-370-db.dtb \
+ 	armada-370-mirabox.dtb \
+	armada-370-smileplug.dtb \
+ 	armada-370-netgear-rn102.dtb \
+ 	armada-370-netgear-rn104.dtb \
+ 	armada-370-rd.dtb \
+diff --git a/arch/arm/boot/dts/armada-370-smileplug.dts b/arch/arm/boot/dts/armada-370-smileplug.dts
+new file mode 100644
+index 0000000..d01308a
+--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-smileplug.dts
+@@ -0,0 +1,173 @@
+/*
+ * Device Tree file for Marvell SMILE Plug
+ *
+ * Kevin Mihelich <kevin@archlinuxarm.org>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "Marvell SMILE Plug";
+	compatible = "marvell,smileplug", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Internal mini-PCIe connector */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected on the PCB to a USB 3.0 XHCI controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			timer@20300 {
+				clock-frequency = <600000000>;
+				status = "okay";
+			};
+
+			gpio_leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&smile_led_pins>;
+
+				red_eyes_led {
+					label = "smileplug:red:eyes";
+					gpios = <&gpio1 31 0>;
+					default-state = "off";
+				};
+
+				green_eyes_led {
+					label = "smileplug:green:eyes";
+					gpios = <&gpio2 0 0>;
+					linux,default-trigger = "default-on";
+				};
+
+				red_smile_led {
+					label = "smileplug:red:smile";
+					gpios = <&gpio1 15 0>;
+					default-state = "off";
+				};
+
+				green_smile_led {
+					label = "smileplug:green:smile";
+					gpios = <&gpio1 27 0>;
+					linux,default-trigger = "default-on";
+				};
+			};
+
+			mdio {
+				pinctrl-0 = <&mdio_pins>;
+				pinctrl-names = "default";
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins3>;
+				pinctrl-names = "default";
+				status = "okay";
+				/*
+				 * No CD or WP GPIOs: SDIO interface used for
+				 * Wifi/Bluetooth chip
+				 */
+				 broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pca9505: pca9505@25 {
+					compatible = "nxp,pca9505";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x25>;
+				};
+			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x400000>;
+				};
+				partition@400000 {
+					label = "Linux";
+					reg = <0x400000 0x400000>;
+				};
+				partition@800000 {
+					label = "Filesystem";
+					reg = <0x800000 0x3f800000>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	smile_led_pins: smile-led-pins {
+		marvell,pins = "mpp63", "mpp64", "mpp47", "mpp59";
+		marvell,function = "gpio";
+	};
+};
+-- 
+2.3.0
+
--- a/core/linux-usbarmory/0004-fix-mvsdio-eMMC-timing.patch
+++ b/core/linux-usbarmory/0004-fix-mvsdio-eMMC-timing.patch
@ -0,0 +1,38 @@
+From 29195baa48fe67ae6c0731edc5c64dee9aaf4851 Mon Sep 17 00:00:00 2001
+From: Kevin Mihelich <kevin@archlinuxarm.org>
+Date: Fri, 5 Sep 2014 15:43:56 -0600
+Subject: [PATCH 4/5] fix mvsdio eMMC timing
+
+These changes from Globalscale change the MMC timing to allow the eMMC versions
+of the Mirabox and SMILE Plug to work.
+
+Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
+---
+ drivers/mmc/host/mvsdio.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
+index 4f8618f..ab95bb7 100644
+--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
+@@ -97,7 +97,7 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data)
+ 	tmout_index = fls(tmout - 1) - 12;
+ 	if (tmout_index < 0)
+ 		tmout_index = 0;
+-	if (tmout_index > MVSD_HOST_CTRL_TMOUT_MAX)
+//	if (tmout_index > MVSD_HOST_CTRL_TMOUT_MAX)	//by steven, try to setup the timeout to maximum value
+ 		tmout_index = MVSD_HOST_CTRL_TMOUT_MAX;
+ 
+ 	dev_dbg(host->dev, "data %s at 0x%08x: blocks=%d blksz=%d tmout=%u (%d)\n",
+@@ -619,6 +619,8 @@ static void mvsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+ 		u32 m = DIV_ROUND_UP(host->base_clock, ios->clock) - 1;
+ 		if (m > MVSD_BASE_DIV_MAX)
+ 			m = MVSD_BASE_DIV_MAX;
+		if(ios->clock==50000000 )	//by steven
+			m=1;
+ 		mvsd_write(MVSD_CLK_DIV, m);
+ 		host->clock = ios->clock;
+ 		host->ns_per_clk = 1000000000 / (host->base_clock / (m+1));
+-- 
+2.3.0
+
--- a/core/linux-usbarmory/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch
+++ b/core/linux-usbarmory/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch
@ -0,0 +1,95 @@
+From 5d0fb467e28aeff79590ddcbe69219f4fc2b8fdf Mon Sep 17 00:00:00 2001
+From: popcornmix <popcornmix@gmail.com>
+Date: Tue, 18 Feb 2014 01:43:50 -0300
+Subject: [PATCH 5/5] net/smsc95xx: Allow mac address to be set as a parameter
+
+---
+ drivers/net/usb/smsc95xx.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 56 insertions(+)
+
+diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
+index 26423ad..e29a323 100644
+--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
+@@ -59,6 +59,7 @@
+ #define SUSPEND_SUSPEND3		(0x08)
+ #define SUSPEND_ALLMODES		(SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
+ 					 SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
+#define MAC_ADDR_LEN                    (6)
+ 
+ struct smsc95xx_priv {
+ 	u32 mac_cr;
+@@ -74,6 +75,10 @@ static bool turbo_mode = true;
+ module_param(turbo_mode, bool, 0644);
+ MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
+ 
+static char *macaddr = ":";
+module_param(macaddr, charp, 0);
+MODULE_PARM_DESC(macaddr, "MAC address");
+
+ static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index,
+ 					    u32 *data, int in_pm)
+ {
+@@ -763,8 +768,59 @@ static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+ 	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+ }
+ 
+/* Check the macaddr module parameter for a MAC address */
+static int smsc95xx_is_macaddr_param(struct usbnet *dev, u8 *dev_mac)
+{
+       int i, j, got_num, num;
+       u8 mtbl[MAC_ADDR_LEN];
+
+       if (macaddr[0] == ':')
+               return 0;
+
+       i = 0;
+       j = 0;
+       num = 0;
+       got_num = 0;
+       while (j < MAC_ADDR_LEN) {
+               if (macaddr[i] && macaddr[i] != ':') {
+                       got_num++;
+                       if ('0' <= macaddr[i] && macaddr[i] <= '9')
+                               num = num * 16 + macaddr[i] - '0';
+                       else if ('A' <= macaddr[i] && macaddr[i] <= 'F')
+                               num = num * 16 + 10 + macaddr[i] - 'A';
+                       else if ('a' <= macaddr[i] && macaddr[i] <= 'f')
+                               num = num * 16 + 10 + macaddr[i] - 'a';
+                       else
+                               break;
+                       i++;
+               } else if (got_num == 2) {
+                       mtbl[j++] = (u8) num;
+                       num = 0;
+                       got_num = 0;
+                       i++;
+               } else {
+                       break;
+               }
+       }
+
+       if (j == MAC_ADDR_LEN) {
+               netif_dbg(dev, ifup, dev->net, "Overriding MAC address with: "
+               "%02x:%02x:%02x:%02x:%02x:%02x\n", mtbl[0], mtbl[1], mtbl[2],
+                                               mtbl[3], mtbl[4], mtbl[5]);
+               for (i = 0; i < MAC_ADDR_LEN; i++)
+                       dev_mac[i] = mtbl[i];
+               return 1;
+       } else {
+               return 0;
+       }
+}
+
+ static void smsc95xx_init_mac_address(struct usbnet *dev)
+ {
+       /* Check module parameters */
+       if (smsc95xx_is_macaddr_param(dev, dev->net->dev_addr))
+               return;
+
+ 	/* try reading mac address from EEPROM */
+ 	if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
+ 			dev->net->dev_addr) == 0) {
+-- 
+2.3.0
+
--- a/core/linux-usbarmory/PKGBUILD
+++ b/core/linux-usbarmory/PKGBUILD
@ -0,0 +1,281 @@
+# USB Armory limited kernel
+# Maintainer: Kevin Mihelich <kevin@archlinuxarm.org>
+# Maintainer: Jason Plum <jplum@archlinuxarm.org>
+
+buildarch=4
+
+pkgbase=linux-usbarmory
+_srcname=linux-3.19
+_kernelname=${pkgbase#linux}
+_desc="ARMv7 USB armory"
+pkgver=3.19.1
+pkgrel=1
+rcnrel=armv7-x3
+arch=('armv7h')
+url="http://www.kernel.org/"
+license=('GPL2')
+makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc' 'git' 'uboot-tools')
+options=('!strip')
+source=("http://www.kernel.org/pub/linux/kernel/v3.x/${_srcname}.tar.xz"
+        #"http://www.kernel.org/pub/linux/kernel/v3.x/patch-${pkgver}.xz"
+        "http://rcn-ee.net/deb/sid-armhf/v${pkgver}-${rcnrel}/patch-${pkgver%.0}-${rcnrel}.diff.gz"
+        "git://git.code.sf.net/p/aufs/aufs3-standalone#branch=aufs${pkgver%.*}"
+        #"git://git.code.sf.net/p/aufs/aufs3-standalone#branch=aufs3.x-rcN"
+        '0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch'
+        '0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch'
+        '0003-SMILE-Plug-device-tree-file.patch'
+        '0004-fix-mvsdio-eMMC-timing.patch'
+        '0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch'
+        'config')
+md5sums=('d3fc8316d4d4d04b65cbc2d70799e763'
+         '0f085618a0d85d406320e8bbba7fbec1'
+         'SKIP'
+         '98931609e0e5c0beb3dbaabfb669b872'
+         'b7aa41223a0eff197ab905d9791e4ec4'
+         'd71cd90ee737afc07708fae7e449d651'
+         '950087add736d74afacd54bcfe8908d9'
+         'd6ef79617d7e59e841f4f3d65501a6d8'
+         '47604e349d7809f0c71f54de1ecb66df')
+
+prepare() {
+  cd "${srcdir}/${_srcname}"
+
+  # add upstream patch
+  #git apply --whitespace=nowarn ../patch-${pkgver}
+
+  # RCN patch
+  git apply ../patch-${pkgver%.0}-${rcnrel}.diff
+
+  # ALARM patches
+  git apply ../0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch
+  git apply ../0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch
+  git apply ../0003-SMILE-Plug-device-tree-file.patch
+  git apply ../0004-fix-mvsdio-eMMC-timing.patch
+  git apply ../0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch
+
+  # AUFS patches
+  cp -ru "${srcdir}/aufs3-standalone/Documentation" .
+  cp -ru "${srcdir}/aufs3-standalone/fs" .
+  cp -ru "${srcdir}/aufs3-standalone/include/uapi/linux/aufs_type.h" ./include/linux
+  cp -ru "${srcdir}/aufs3-standalone/include/uapi/linux/aufs_type.h" ./include/uapi/linux
+
+  git apply ../aufs3-standalone/aufs3-kbuild.patch
+  git apply ../aufs3-standalone/aufs3-base.patch
+  git apply ../aufs3-standalone/aufs3-mmap.patch
+  git apply ../aufs3-standalone/aufs3-standalone.patch
+
+  cat "${srcdir}/config" > ./.config
+
+  # add pkgrel to extraversion
+  sed -ri "s|^(EXTRAVERSION =)(.*)|\1 \2-${pkgrel}|" Makefile
+
+  # don't run depmod on 'make install'. We'll do this ourselves in packaging
+  sed -i '2iexit 0' scripts/depmod.sh
+}
+
+build() {
+  cd "${srcdir}/${_srcname}"
+
+  # get kernel version
+  make prepare
+
+  # load configuration
+  # Configure the kernel. Replace the line below with one of your choice.
+  #make menuconfig # CLI menu for configuration
+  #make nconfig # new CLI menu for configuration
+  #make xconfig # X-based configuration
+  #make oldconfig # using old config from previous kernel version
+  # ... or manually edit .config
+
+  # Copy back our configuration (use with new kernel version)
+  #cp ./.config ../${pkgbase}.config
+
+  ####################
+  # stop here
+  # this is useful to configure the kernel
+  #msg "Stopping build"
+  #return 1
+  ####################
+
+  #yes "" | make config
+
+  # build!
+  make ${MAKEFLAGS} zImage modules dtbs
+}
+
+_package() {
+  pkgdesc="The Linux Kernel and modules - ${_desc}"
+  depends=('coreutils' 'linux-firmware' 'kmod' 'mkinitcpio>=0.7')
+  optdepends=('crda: to set the correct wireless channels of your country')
+  provides=('kernel26' "linux=${pkgver}" 'aufs_friendly')
+  conflicts=('linux')
+  replaces=('linux-mvebu' 'linux-udoo')
+  install=${pkgname}.install
+
+  cd "${srcdir}/${_srcname}"
+
+  KARCH=arm
+
+  # get kernel version
+  _kernver="$(make kernelrelease)"
+  _basekernel=${_kernver%%-*}
+  _basekernel=${_basekernel%.*}
+
+  mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot/dtbs}
+  make INSTALL_MOD_PATH="${pkgdir}" modules_install
+  cp arch/$KARCH/boot/zImage "${pkgdir}/boot/zImage"
+  cp arch/$KARCH/boot/dts/*.dtb "${pkgdir}/boot/dtbs"
+
+  # set correct depmod command for install
+  sed \
+    -e  "s/KERNEL_NAME=.*/KERNEL_NAME=${_kernelname}/g" \
+    -e  "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/g" \
+    -i "${startdir}/${pkgname}.install"
+
+  # remove build and source links
+  rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build}
+  # remove the firmware
+  rm -rf "${pkgdir}/lib/firmware"
+  # gzip -9 all modules to save 100MB of space
+  find "${pkgdir}" -name '*.ko' |xargs -P 2 -n 1 gzip -9
+  # make room for external modules
+  ln -s "../extramodules-${_basekernel}-${_kernelname:-ARCH}" "${pkgdir}/lib/modules/${_kernver}/extramodules"
+  # add real version for building modules and running depmod from post_install/upgrade
+  mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}-${_kernelname:-ARCH}"
+  echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}-${_kernelname:-ARCH}/version"
+
+  # Now we call depmod...
+  depmod -b "$pkgdir" -F System.map "$_kernver"
+
+  # move module tree /lib -> /usr/lib
+  mkdir -p "${pkgdir}/usr"
+  mv "$pkgdir/lib" "$pkgdir/usr"
+}
+
+_package-headers() {
+  pkgdesc="Header files and scripts for building modules for linux kernel - ${_desc}"
+  provides=("linux-headers=${pkgver}")
+  conflicts=('linux-headers')
+  replaces=('linux-mvebu-headers')
+
+  install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}"
+
+  cd "${srcdir}/${_srcname}"
+  install -D -m644 Makefile \
+    "${pkgdir}/usr/lib/modules/${_kernver}/build/Makefile"
+  install -D -m644 kernel/Makefile \
+    "${pkgdir}/usr/lib/modules/${_kernver}/build/kernel/Makefile"
+  install -D -m644 .config \
+    "${pkgdir}/usr/lib/modules/${_kernver}/build/.config"
+
+  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include"
+
+  for i in acpi asm-generic config crypto drm generated keys linux math-emu \
+    media net pcmcia scsi sound trace uapi video xen; do
+    cp -a include/${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/include/"
+  done
+
+  # copy arch includes for external modules
+  mkdir -p ${pkgdir}/usr/lib/modules/${_kernver}/build/arch/$KARCH
+  cp -a arch/$KARCH/include ${pkgdir}/usr/lib/modules/${_kernver}/build/arch/$KARCH/
+  mkdir -p ${pkgdir}/usr/lib/modules/${_kernver}/build/arch/$KARCH/mach-omap2
+  cp -a arch/$KARCH/mach-omap2/include ${pkgdir}/usr/lib/modules/${_kernver}/build/arch/$KARCH/mach-omap2/
+  mkdir -p ${pkgdir}/usr/lib/modules/${_kernver}/build/arch/$KARCH/mach-mvebu
+  cp -a arch/$KARCH/mach-mvebu/include ${pkgdir}/usr/lib/modules/${_kernver}/build/arch/$KARCH/mach-mvebu/
+  mkdir -p ${pkgdir}/usr/lib/modules/${_kernver}/build/arch/$KARCH/plat-omap
+  cp -a arch/$KARCH/plat-omap/include ${pkgdir}/usr/lib/modules/${_kernver}/build/arch/$KARCH/plat-omap/
+
+  # copy files necessary for later builds, like nvidia and vmware
+  cp Module.symvers "${pkgdir}/usr/lib/modules/${_kernver}/build"
+  cp -a scripts "${pkgdir}/usr/lib/modules/${_kernver}/build"
+
+  # fix permissions on scripts dir
+  chmod og-w -R "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts"
+  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/.tmp_versions"
+
+  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel"
+
+  cp arch/${KARCH}/Makefile "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
+
+  cp arch/${KARCH}/kernel/asm-offsets.s "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel/"
+
+  # add docbook makefile
+  install -D -m644 Documentation/DocBook/Makefile \
+    "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"
+
+  # add dm headers
+  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"
+  cp drivers/md/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"
+
+  # add inotify.h
+  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux"
+  cp include/linux/inotify.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux/"
+
+  # add wireless headers
+  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"
+  cp net/mac80211/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"
+
+  # add dvb headers for external modules
+  # in reference to:
+  # http://bugs.archlinux.org/task/9912
+  #mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core"
+  #cp drivers/media/dvb-core/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core/"
+  # and...
+  # http://bugs.archlinux.org/task/11194
+  #mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"
+  #cp include/config/dvb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"
+
+  # add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
+  # in reference to:
+  # http://bugs.archlinux.org/task/13146
+  #mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
+  #cp drivers/media/dvb-frontends/lgdt330x.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
+  #mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"
+  #cp drivers/media/i2c/msp3400-driver.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"
+
+  # add dvb headers
+  # in reference to:
+  # http://bugs.archlinux.org/task/20402
+  #mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb"
+  #cp drivers/media/usb/dvb-usb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb/"
+  #mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends"
+  #cp drivers/media/dvb-frontends/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
+  #mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners"
+  #cp drivers/media/tuners/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners/"
+
+  # add xfs and shmem for aufs building
+  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs"
+  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/mm"
+
+  # copy in Kconfig files
+  for i in $(find . -name "Kconfig*"); do
+    mkdir -p "${pkgdir}"/usr/lib/modules/${_kernver}/build/`echo ${i} | sed 's|/Kconfig.*||'`
+    cp ${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/${i}"
+  done
+
+  chown -R root.root "${pkgdir}/usr/lib/modules/${_kernver}/build"
+  find "${pkgdir}/usr/lib/modules/${_kernver}/build" -type d -exec chmod 755 {} \;
+
+  # strip scripts directory
+  find "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do
+    case "$(file -bi "${binary}")" in
+      *application/x-sharedlib*) # Libraries (.so)
+        /usr/bin/strip ${STRIP_SHARED} "${binary}";;
+      *application/x-archive*) # Libraries (.a)
+        /usr/bin/strip ${STRIP_STATIC} "${binary}";;
+      *application/x-executable*) # Binaries
+        /usr/bin/strip ${STRIP_BINARIES} "${binary}";;
+    esac
+  done
+
+  # remove unneeded architectures
+  rm -rf "${pkgdir}"/usr/lib/modules/${_kernver}/build/arch/{alpha,arc,arm26,arm64,avr32,blackfin,c6x,cris,frv,h8300,hexagon,ia64,m32r,m68k,m68knommu,metag,mips,microblaze,mn10300,openrisc,parisc,powerpc,ppc,s390,score,sh,sh64,sparc,sparc64,tile,unicore32,um,v850,x86,xtensa}
+}
+
+
+pkgname=("${pkgbase}" "${pkgbase}-headers")
+for _p in ${pkgname[@]}; do
+  eval "package_${_p}() {
+    _package${_p#${pkgbase}}
+  }"
+done
--- a/core/linux-usbarmory/config
+++ b/core/linux-usbarmory/config
--- a/core/linux-usbarmory/linux-usbarmory.install
+++ b/core/linux-usbarmory/linux-usbarmory.install
@ -0,0 +1,19 @@
+# arg 1:  the new package version
+# arg 2:  the old package version
+
+KERNEL_NAME=-usbarmory
+KERNEL_VERSION=3.14.0-1-ARCH
+
+post_install () {
+  # updating module dependencies
+  echo ">>> Updating module dependencies. Please wait ..."
+  depmod ${KERNEL_VERSION}
+
+  echo "NOTE: Using this kernel requires an updated U-Boot!"
+}
+
+post_upgrade() {
+  # updating module dependencies
+  echo ">>> Updating module dependencies. Please wait ..."
+  depmod ${KERNEL_VERSION}
+}