diff -urN a/include/configs/wandboard.h b/include/configs/wandboard.h
--- a/include/configs/wandboard.h	2013-07-25 18:18:02.185623052 -0600
+++ b/include/configs/wandboard.h	2013-07-25 18:49:02.460474904 -0600
@@ -51,7 +51,7 @@
 #define CONFIG_CMD_BMODE
 #define CONFIG_CMD_SETEXPR
 
-#define CONFIG_BOOTDELAY		5
+#define CONFIG_BOOTDELAY		1
 
 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
@@ -70,6 +70,8 @@
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FS_GENERIC
 #define CONFIG_DOS_PARTITION
 
 /* Ethernet Configuration */
@@ -102,16 +104,18 @@
 #define CONFIG_IPUV3_CLK 260000000
 
 #if defined(CONFIG_MX6DL)
-#define CONFIG_DEFAULT_FDT_FILE		"imx6dl-wandboard.dtb"
+#define CONFIG_DEFAULT_FDT_FILE		"/boot/dtbs/imx6dl-wandboard.dtb"
 #elif defined(CONFIG_MX6Q)
-#define CONFIG_DEFAULT_FDT_FILE		"imx6q-wandboard.dtb"
+#define CONFIG_DEFAULT_FDT_FILE		"/boot/dtbs/imx6q-wandboard.dtb"
 #elif defined(CONFIG_MX6S)
-#define CONFIG_DEFAULT_FDT_FILE		"imx6s-wandboard.dtb"
+#define CONFIG_DEFAULT_FDT_FILE		"/boot/dtbs/imx6s-wandboard.dtb"
 #endif
 
+#define CONFIG_IDENT_STRING " Arch Linux ARM"
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"uimage=uImage\0" \
+	"script=/boot/boot.scr\0" \
+	"uimage=/boot/uImage\0" \
 	"console=ttymxc0\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
@@ -121,7 +125,7 @@
 	"ip_dyn=yes\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+	"mmcroot=/dev/mmcblk0p1 rootwait rw\0" \
 	"update_sd_firmware_filename=u-boot.imx\0" \
 	"update_sd_firmware=" \
 		"if test ${ip_dyn} = yes; then " \
@@ -139,11 +143,11 @@
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
 	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
@@ -237,6 +241,7 @@
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_CMD_BOOTZ
+#define CONFIG_SUPPORT_RAW_INITRD
 
 #ifndef CONFIG_SYS_DCACHE_OFF
 #define CONFIG_CMD_CACHE