diff -urN a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c --- a/arch/arm/mach-kirkwood/dockstar-setup.c 2011-10-24 01:10:05.000000000 -0600 +++ b/arch/arm/mach-kirkwood/dockstar-setup.c 2012-01-14 03:32:44.000000000 -0700 @@ -19,7 +19,6 @@ #include #include #include -#include #include "common.h" #include "mpp.h" @@ -33,6 +32,10 @@ .offset = MTDPART_OFS_NXTBLK, .size = SZ_4M }, { + .name = "pogoplug", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_32M + }, { .name = "root", .offset = MTDPART_OFS_NXTBLK, .size = MTDPART_SIZ_FULL @@ -45,17 +48,17 @@ static struct gpio_led dockstar_led_pins[] = { { - .name = "dockstar:green:health", + .name = "status:green:health", .default_trigger = "default-on", .gpio = 46, .active_low = 1, }, { - .name = "dockstar:orange:misc", + .name = "status:orange:fault", .default_trigger = "none", .gpio = 47, .active_low = 1, - }, + } }; static struct gpio_led_platform_data dockstar_led_data = { @@ -73,8 +76,8 @@ static unsigned int dockstar_mpp_config[] __initdata = { MPP29_GPIO, /* USB Power Enable */ - MPP46_GPIO, /* LED green */ - MPP47_GPIO, /* LED orange */ + MPP47_GPIO, /* LED Orange */ + MPP46_GPIO, /* LED Green */ 0 }; diff -urN a/arch/arm/mach-kirkwood/goflexhome-setup.c b/arch/arm/mach-kirkwood/goflexhome-setup.c --- a/arch/arm/mach-kirkwood/goflexhome-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/goflexhome-setup.c 2012-01-14 03:32:44.000000000 -0700 @@ -0,0 +1,123 @@ +/* + * arch/arm/mach-kirkwood/goflexhome-setup.c + * + * Seagate GoFlex Home Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition goflexhome_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_2M + SZ_4M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data goflexhome_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv_sata_platform_data goflexhome_sata_data = { + .n_ports = 1, +}; + +static struct gpio_led goflexhome_led_pins[] = { + { + .name = "status:green:health", + .default_trigger = "default-on", + .gpio = 46, + .active_low = 1, + }, + { + .name = "status:orange:fault", + .default_trigger = "none", + .gpio = 47, + .active_low = 1, + }, + { + .name = "status:white:misc", + .default_trigger = "none", + .gpio = 40, + .active_low = 0, + } +}; + +static struct gpio_led_platform_data goflexhome_led_data = { + .leds = goflexhome_led_pins, + .num_leds = ARRAY_SIZE(goflexhome_led_pins), +}; + +static struct platform_device goflexhome_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &goflexhome_led_data, + } +}; + +static unsigned int goflexhome_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP47_GPIO, /* LED Orange */ + MPP46_GPIO, /* LED Green */ + MPP40_GPIO, /* LED White */ + 0 +}; + +static void __init goflexhome_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + + /* setup gpio pin select */ + kirkwood_mpp_conf(goflexhome_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(goflexhome_nand_parts), 25); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + kirkwood_ge00_init(&goflexhome_ge00_data); + kirkwood_sata_init(&goflexhome_sata_data); + + platform_device_register(&goflexhome_leds); +} + +MACHINE_START(GOFLEXHOME, "Seagate GoFlex Home") + /* Maintainer: Peter Carmichael */ + .boot_params = 0x00000100, + .init_machine = goflexhome_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END + diff -urN a/arch/arm/mach-kirkwood/goflexnet-setup.c b/arch/arm/mach-kirkwood/goflexnet-setup.c --- a/arch/arm/mach-kirkwood/goflexnet-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/goflexnet-setup.c 2012-01-14 03:32:44.000000000 -0700 @@ -0,0 +1,176 @@ +/* + * arch/arm/mach-kirkwood/goflexnet-setup.c + * + * Seagate GoFlex Net Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition goflexnet_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "pogoplug", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_32M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data goflexnet_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv_sata_platform_data goflexnet_sata_data = { + .n_ports = 2, +}; + +static struct gpio_led goflexnet_led_pins[] = { + { + .name = "status:green:health", + .default_trigger = "default-on", + .gpio = 46, // 0x4000 + .active_low = 1, + }, + { + .name = "status:orange:fault", + .default_trigger = "none", + .gpio = 47, // 0x8000 + .active_low = 1, + }, + { + .name = "status:white:left0", + .default_trigger = "none", + .gpio = 42, // 0x0400 + .active_low = 0, + }, + { + .name = "status:white:left1", + .default_trigger = "none", + .gpio = 43, // 0x0800 + .active_low = 0, + }, + { + .name = "status:white:left2", + .default_trigger = "none", + .gpio = 44, // 0x1000 + .active_low = 0, + }, + { + .name = "status:white:left3", + .default_trigger = "none", + .gpio = 45, // 0x2000 + .active_low = 0, + }, + { + .name = "status:white:right0", + .default_trigger = "none", + .gpio = 38, // 0x0040 + .active_low = 0, + }, + { + .name = "status:white:right1", + .default_trigger = "none", + .gpio = 39, // 0x0080 + .active_low = 0, + }, + { + .name = "status:white:right2", + .default_trigger = "none", + .gpio = 40, // 0x0100 + .active_low = 0, + }, + { + .name = "status:white:right3", + .default_trigger = "none", + .gpio = 41, // 0x0200 + .active_low = 0, + } +}; + +static struct gpio_led_platform_data goflexnet_led_data = { + .leds = goflexnet_led_pins, + .num_leds = ARRAY_SIZE(goflexnet_led_pins), +}; + +static struct platform_device goflexnet_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &goflexnet_led_data, + } +}; + +static unsigned int goflexnet_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP47_GPIO, /* LED Orange */ + MPP46_GPIO, /* LED Green */ + MPP45_GPIO, /* LED Left Capacity 3 */ + MPP44_GPIO, /* LED Left Capacity 2 */ + MPP43_GPIO, /* LED Left Capacity 1 */ + MPP42_GPIO, /* LED Left Capacity 0 */ + MPP41_GPIO, /* LED Right Capacity 3 */ + MPP40_GPIO, /* LED Right Capacity 2 */ + MPP39_GPIO, /* LED Right Capacity 1 */ + MPP38_GPIO, /* LED Right Capacity 0 */ + 0 +}; + +static void __init goflexnet_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + + /* setup gpio pin select */ + kirkwood_mpp_conf(goflexnet_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(goflexnet_nand_parts), 25); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + kirkwood_ge00_init(&goflexnet_ge00_data); + kirkwood_sata_init(&goflexnet_sata_data); + + platform_device_register(&goflexnet_leds); +} + +MACHINE_START(GOFLEXNET, "Seagate GoFlex Net") + /* Maintainer: Peter Carmichael */ + .boot_params = 0x00000100, + .init_machine = goflexnet_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END + diff -urN a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c --- a/arch/arm/mach-kirkwood/guruplug-setup.c 2011-10-24 01:10:05.000000000 -0600 +++ b/arch/arm/mach-kirkwood/guruplug-setup.c 2012-01-14 03:32:44.000000000 -0700 @@ -57,22 +57,24 @@ static struct gpio_led guruplug_led_pins[] = { { - .name = "guruplug:red:health", + .name = "status:red:fault", + .default_trigger = "none", .gpio = 46, .active_low = 1, }, { - .name = "guruplug:green:health", + .name = "status:green:health", + .default_trigger = "default-on", .gpio = 47, .active_low = 1, }, { - .name = "guruplug:red:wmode", + .name = "status:red:wmode", .gpio = 48, .active_low = 1, }, { - .name = "guruplug:green:wmode", + .name = "status:green:wmode", .gpio = 49, .active_low = 1, }, diff -urN a/arch/arm/mach-kirkwood/iconnect-setup.c b/arch/arm/mach-kirkwood/iconnect-setup.c --- a/arch/arm/mach-kirkwood/iconnect-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/iconnect-setup.c 2012-01-14 03:32:44.000000000 -0700 @@ -0,0 +1,203 @@ +/* + * arch/arm/mach-kirkwood/iconnect-setup.c + * + * Iomega iConnect Wireless + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition iconnect_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_1M + SZ_2M + }, { + .name = "rootfs", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_32M, + }, { + .name = "data", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data iconnect_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(11), +}; + +static struct gpio_led iconnect_led_pins[] = { + { + .name = "iconnect:led_level", + .default_trigger = "default-on", + .gpio = 41, + }, + { + .name = "iconnect:blue:power", + .default_trigger = "default-on", + .gpio = 42, + }, + { + .name = "iconnect:red:power", + .gpio = 43, + }, + { + .name = "iconnect:blue:usb1", + .gpio = 44, + }, + { + .name = "iconnect:blue:usb2", + .gpio = 45, + }, + { + .name = "iconnect:blue:usb3", + .gpio = 46, + }, + { + .name = "iconnect:blue:usb4", + .gpio = 47, + }, + { + .name = "iconnect:blue:otb", + .gpio = 48, + }, +}; + +static struct gpio_led_platform_data iconnect_led_data = { + .leds = iconnect_led_pins, + .num_leds = ARRAY_SIZE(iconnect_led_pins), +}; + +static struct platform_device iconnect_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &iconnect_led_data, + } +}; + +#define ICONNECT_GPIO_KEY_RESET 12 +#define ICONNECT_GPIO_KEY_OTB 35 + +#define ICONNECT_SW_RESET 0x00 +#define ICONNECT_SW_OTB 0x01 + +static struct gpio_keys_button iconnect_buttons[] = { + { + .type = EV_SW, + .code = ICONNECT_SW_RESET, + .gpio = ICONNECT_GPIO_KEY_RESET, + .desc = "Reset Button", + .active_low = 1, + .debounce_interval = 100, + }, + { + .type = EV_SW, + .code = ICONNECT_SW_OTB, + .gpio = ICONNECT_GPIO_KEY_OTB, + .desc = "OTB Button", + .active_low = 1, + .debounce_interval = 100, + }, +}; + +static struct gpio_keys_platform_data iconnect_button_data = { + .buttons = iconnect_buttons, + .nbuttons = ARRAY_SIZE(iconnect_buttons), +}; + +static struct platform_device iconnect_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &iconnect_button_data, + }, +}; + +static unsigned int iconnect_mpp_config[] __initdata = { + MPP12_GPIO, /*Input for reset button*/ + MPP35_GPIO, /*Input for OTB button*/ + MPP41_GPIO, + MPP42_GPIO, + MPP43_GPIO, + MPP44_GPIO, + MPP45_GPIO, + MPP46_GPIO, + MPP47_GPIO, + MPP48_GPIO, + 0 +}; + +static struct i2c_board_info __initdata iconnect_i2c_rtc = { + I2C_BOARD_INFO("lm63", 0x4c), +}; + +static void __init iconnect_init(void) +{ + u32 dev, rev; + + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(iconnect_mpp_config); + + kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25); + kirkwood_ehci_init(); + + kirkwood_ge00_init(&iconnect_ge00_data); + kirkwood_pcie_id(&dev, &rev); + + kirkwood_uart0_init(); + + platform_device_register(&iconnect_leds); + platform_device_register(&iconnect_button_device); + + kirkwood_i2c_init(); + i2c_register_board_info(0, &iconnect_i2c_rtc, 1); + +} + +static int __init iconnect_pci_init(void) +{ + if (machine_is_iconnect()) + kirkwood_pcie_init(KW_PCIE0); + + return 0; +} +subsys_initcall(iconnect_pci_init); + + +MACHINE_START(ICONNECT, "Iomega iConnect Wireless") + .boot_params = 0x00000100, + .init_machine = iconnect_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END diff -urN a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig --- a/arch/arm/mach-kirkwood/Kconfig 2011-10-24 01:10:05.000000000 -0600 +++ b/arch/arm/mach-kirkwood/Kconfig 2012-01-14 04:04:19.000000000 -0700 @@ -64,6 +64,31 @@ Say 'Y' here if you want your kernel to support the Seagate FreeAgent DockStar. +config MACH_GOFLEXNET + bool "Seagate GoFlex Net" + help + Say 'Y' here if you want your kernel to support the + Seagate GoFlex Net. + +config MACH_GOFLEXHOME + bool "Seagate GoFlex Home" + help + Say 'Y' here if you want your kernel to support the + Seagate GoFlex Home. + +config MACH_ICONNECT + bool "Iomega iConnect Wireless" + help + Say 'Y' here if you want your kernel to support the + Iomega iConnect Wireless. Overrides Marvell RD-88F6281 + Reference Board. + +config MACH_POGOPLUGV4 + bool "Pogoplug Series 4" + help + Say 'Y' here if you want your kernel to support the + Pogoplug Series 4. + config MACH_OPENRD bool diff -urN a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile --- a/arch/arm/mach-kirkwood/Makefile 2011-10-24 01:10:05.000000000 -0600 +++ b/arch/arm/mach-kirkwood/Makefile 2012-01-14 03:36:39.000000000 -0700 @@ -8,6 +8,10 @@ obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o +obj-$(CONFIG_MACH_GOFLEXNET) += goflexnet-setup.o +obj-$(CONFIG_MACH_GOFLEXHOME) += goflexhome-setup.o +obj-$(CONFIG_MACH_ICONNECT) += iconnect-setup.o +obj-$(CONFIG_MACH_POGOPLUGV4) += pogoplugv4-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o diff -urN a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h --- a/arch/arm/mach-kirkwood/mpp.h 2011-10-24 01:10:05.000000000 -0600 +++ b/arch/arm/mach-kirkwood/mpp.h 2012-01-14 03:32:44.000000000 -0700 @@ -102,6 +102,7 @@ #define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 ) #define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 1, 1, 1, 1, 1 ) #define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 ) #define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 ) #define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 ) diff -urN a/arch/arm/mach-kirkwood/pogoplugv4-setup.c b/arch/arm/mach-kirkwood/pogoplugv4-setup.c --- a/arch/arm/mach-kirkwood/pogoplugv4-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/pogoplugv4-setup.c 2012-01-14 04:34:06.000000000 -0700 @@ -0,0 +1,194 @@ +/* + * arch/arm/mach-kirkwood/pogoplugv4-setup.c + * + * Pogoplug Series 4 Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +#define POGOPLUGV4_GPIO_USB_VBUS 10 + +static struct mtd_partition ppv4_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = 2 * SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = 3 * SZ_1M + }, { + .name = "uImage2", + .offset = MTDPART_OFS_NXTBLK, + .size = 3 * SZ_1M + }, { + .name = "failsafe", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_8M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data pogoplugv4_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv_sata_platform_data pogoplugv4_sata_data = { + .n_ports = 1, +}; + +static struct gpio_keys_button pogoplugv4_button_pins[] = { + { + .code = KEY_EJECTCD, + .gpio = 29, + .desc = "Eject Button", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data pogoplugv4_button_data = { + .buttons = pogoplugv4_button_pins, + .nbuttons = ARRAY_SIZE(pogoplugv4_button_pins), +}; + +static struct platform_device pogoplugv4_buttons = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &pogoplugv4_button_data, + }, +}; + +static struct gpio_led pogoplugv4_led_pins[] = { + { + .name = "status:green:health", + .default_trigger = "default-on", + .gpio = 22, + .active_low = 1, + }, + { + .name = "status:red:fault", + .default_trigger = "none", + .gpio = 24, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data pogoplugv4_led_data = { + .leds = pogoplugv4_led_pins, + .num_leds = ARRAY_SIZE(pogoplugv4_led_pins), +}; + +static struct platform_device pogoplugv4_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &pogoplugv4_led_data, + } +}; + +static struct mvsdio_platform_data ppv4_mvsdio_data = { + .gpio_card_detect = 27, +}; + +static unsigned int ppv4_mpp_config[] __initdata = { + MPP27_GPIO, /* SD card detect */ + MPP29_GPIO, /* Eject button */ + MPP22_GPIO, /* Green LED */ + MPP24_GPIO, /* Red LED */ + MPP12_SD_CLK, + MPP13_SD_CMD, + MPP14_SD_D0, + MPP15_SD_D1, + MPP16_SD_D2, + MPP17_SD_D3, + 0 +}; + +static const struct flash_platform_data pogoplugv4_spi_slave_data = { + .type = "m25p05-nonjedec", +}; + +static struct spi_board_info __initdata pogoplugv4_spi_slave_info[] = { + { + .modalias = "m25p05-nonjedec", + .platform_data = &pogoplugv4_spi_slave_data, + .irq = -1, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static void __init pogoplugv4_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(ppv4_mpp_config); + + orion_gpio_set_valid(POGOPLUGV4_GPIO_USB_VBUS, 1); + if (gpio_request(POGOPLUGV4_GPIO_USB_VBUS, "USB VBUS") != 0 || + gpio_direction_output(POGOPLUGV4_GPIO_USB_VBUS, 1) != 0) + pr_err("POGOPLUGV4: failed to setup USB VBUS GPIO\n"); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&pogoplugv4_ge00_data); + kirkwood_sata_init(&pogoplugv4_sata_data); + spi_register_board_info(pogoplugv4_spi_slave_info, + ARRAY_SIZE(pogoplugv4_spi_slave_info)); + kirkwood_spi_init(); + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(ppv4_nand_parts), 25); + kirkwood_sdio_init(&ppv4_mvsdio_data); + platform_device_register(&pogoplugv4_leds); + platform_device_register(&pogoplugv4_buttons); +} + +static int __init pogoplugv4_pci_init(void) +{ + if (machine_is_pogoplugv4()) + kirkwood_pcie_init(KW_PCIE0); + + return 0; +} +subsys_initcall(pogoplugv4_pci_init); + +MACHINE_START(POGOPLUGV4, "Pogoplug V4") + /* Maintainer: Kevin Mihelich */ + .boot_params = 0x00000100, + .init_machine = pogoplugv4_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END diff -urN a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c 2011-10-24 01:10:05.000000000 -0600 +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c 2012-01-14 03:32:44.000000000 -0700 @@ -64,7 +64,13 @@ .active_low = 1, }, { - .name = "plug:green:health", + .name = "status:green:health", + .default_trigger = "none", + .gpio = 48, + .active_low = 1, + }, + { + .name = "status:blue:health", .default_trigger = "default-on", .gpio = 49, .active_low = 1, @@ -87,7 +93,8 @@ static unsigned int sheevaplug_mpp_config[] __initdata = { MPP29_GPIO, /* USB Power Enable */ MPP46_GPIO, /* LED Red */ - MPP49_GPIO, /* LED */ + MPP48_GPIO, /* LED Green */ + MPP49_GPIO, /* LED Blue */ 0 }; @@ -95,7 +102,9 @@ MPP29_GPIO, /* USB Power Enable */ MPP44_GPIO, /* SD Write Protect */ MPP47_GPIO, /* SD Card Detect */ - MPP49_GPIO, /* LED Green */ + MPP46_GPIO, /* LED Red */ + MPP48_GPIO, /* LED Green */ + MPP49_GPIO, /* LED Blue */ 0 }; diff -urN a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types --- a/arch/arm/tools/mach-types 2011-10-24 01:10:05.000000000 -0600 +++ b/arch/arm/tools/mach-types 2012-01-14 03:41:57.000000000 -0700 @@ -1113,3 +1113,4 @@ thales_adc MACH_THALES_ADC THALES_ADC 3492 ubisys_p9d_evp MACH_UBISYS_P9D_EVP UBISYS_P9D_EVP 3493 atdgp318 MACH_ATDGP318 ATDGP318 3494 +pogoplugv4 MACH_POGOPLUGV4 POGOPLUGV4 3960