diff -urN a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c --- a/arch/arm/mach-kirkwood/dockstar-setup.c 2011-05-18 22:06:34.000000000 -0600 +++ b/arch/arm/mach-kirkwood/dockstar-setup.c 2011-06-14 14:53:22.000000000 -0600 @@ -19,7 +19,6 @@ #include #include #include -#include #include "common.h" #include "mpp.h" @@ -33,6 +32,10 @@ .offset = MTDPART_OFS_NXTBLK, .size = SZ_4M }, { + .name = "pogoplug", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_32M + }, { .name = "root", .offset = MTDPART_OFS_NXTBLK, .size = MTDPART_SIZ_FULL @@ -45,17 +48,17 @@ static struct gpio_led dockstar_led_pins[] = { { - .name = "dockstar:green:health", + .name = "status:green:health", .default_trigger = "default-on", .gpio = 46, .active_low = 1, }, { - .name = "dockstar:orange:misc", + .name = "status:orange:fault", .default_trigger = "none", .gpio = 47, .active_low = 1, - }, + } }; static struct gpio_led_platform_data dockstar_led_data = { @@ -73,8 +76,8 @@ static unsigned int dockstar_mpp_config[] __initdata = { MPP29_GPIO, /* USB Power Enable */ - MPP46_GPIO, /* LED green */ - MPP47_GPIO, /* LED orange */ + MPP47_GPIO, /* LED Orange */ + MPP46_GPIO, /* LED Green */ 0 }; diff -urN a/arch/arm/mach-kirkwood/goflexhome-setup.c b/arch/arm/mach-kirkwood/goflexhome-setup.c --- a/arch/arm/mach-kirkwood/goflexhome-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/goflexhome-setup.c 2011-06-14 14:54:25.000000000 -0600 @@ -0,0 +1,116 @@ +/* + * arch/arm/mach-kirkwood/goflexhome-setup.c + * + * Seagate GoFlex Home Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition goflexhome_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_2M + SZ_4M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data goflexhome_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv_sata_platform_data goflexhome_sata_data = { + .n_ports = 1, +}; + +static struct gpio_led goflexhome_led_pins[] = { + { + .name = "status:green:health", + .default_trigger = "default-on", + .gpio = 46, + .active_low = 1, + }, + { + .name = "status:orange:fault", + .default_trigger = "none", + .gpio = 47, + .active_low = 1, + } +}; + +static struct gpio_led_platform_data goflexhome_led_data = { + .leds = goflexhome_led_pins, + .num_leds = ARRAY_SIZE(goflexhome_led_pins), +}; + +static struct platform_device goflexhome_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &goflexhome_led_data, + } +}; + +static unsigned int goflexhome_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP47_GPIO, /* LED Orange */ + MPP46_GPIO, /* LED Green */ + 0 +}; + +static void __init goflexhome_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + + /* setup gpio pin select */ + kirkwood_mpp_conf(goflexhome_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(goflexhome_nand_parts), 25); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + kirkwood_ge00_init(&goflexhome_ge00_data); + kirkwood_sata_init(&goflexhome_sata_data); + + platform_device_register(&goflexhome_leds); +} + +MACHINE_START(GOFLEXHOME, "Seagate GoFlex Home") + /* Maintainer: Peter Carmichael */ + .boot_params = 0x00000100, + .init_machine = goflexhome_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END + diff -urN a/arch/arm/mach-kirkwood/goflexnet-setup.c b/arch/arm/mach-kirkwood/goflexnet-setup.c --- a/arch/arm/mach-kirkwood/goflexnet-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/goflexnet-setup.c 2011-06-14 14:54:12.000000000 -0600 @@ -0,0 +1,176 @@ +/* + * arch/arm/mach-kirkwood/goflexnet-setup.c + * + * Seagate GoFlex Net Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition goflexnet_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "pogoplug", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_32M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data goflexnet_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv_sata_platform_data goflexnet_sata_data = { + .n_ports = 2, +}; + +static struct gpio_led goflexnet_led_pins[] = { + { + .name = "status:green:health", + .default_trigger = "default-on", + .gpio = 46, // 0x4000 + .active_low = 1, + }, + { + .name = "status:orange:fault", + .default_trigger = "none", + .gpio = 47, // 0x8000 + .active_low = 1, + }, + { + .name = "status:white:left0", + .default_trigger = "none", + .gpio = 42, // 0x0400 + .active_low = 0, + }, + { + .name = "status:white:left1", + .default_trigger = "none", + .gpio = 43, // 0x0800 + .active_low = 0, + }, + { + .name = "status:white:left2", + .default_trigger = "none", + .gpio = 44, // 0x1000 + .active_low = 0, + }, + { + .name = "status:white:left3", + .default_trigger = "none", + .gpio = 45, // 0x2000 + .active_low = 0, + }, + { + .name = "status:white:right0", + .default_trigger = "none", + .gpio = 38, // 0x0040 + .active_low = 0, + }, + { + .name = "status:white:right1", + .default_trigger = "none", + .gpio = 39, // 0x0080 + .active_low = 0, + }, + { + .name = "status:white:right2", + .default_trigger = "none", + .gpio = 40, // 0x0100 + .active_low = 0, + }, + { + .name = "status:white:right3", + .default_trigger = "none", + .gpio = 41, // 0x0200 + .active_low = 0, + } +}; + +static struct gpio_led_platform_data goflexnet_led_data = { + .leds = goflexnet_led_pins, + .num_leds = ARRAY_SIZE(goflexnet_led_pins), +}; + +static struct platform_device goflexnet_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &goflexnet_led_data, + } +}; + +static unsigned int goflexnet_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP47_GPIO, /* LED Orange */ + MPP46_GPIO, /* LED Green */ + MPP45_GPIO, /* LED Left Capacity 3 */ + MPP44_GPIO, /* LED Left Capacity 2 */ + MPP43_GPIO, /* LED Left Capacity 1 */ + MPP42_GPIO, /* LED Left Capacity 0 */ + MPP41_GPIO, /* LED Right Capacity 3 */ + MPP40_GPIO, /* LED Right Capacity 2 */ + MPP39_GPIO, /* LED Right Capacity 1 */ + MPP38_GPIO, /* LED Right Capacity 0 */ + 0 +}; + +static void __init goflexnet_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + + /* setup gpio pin select */ + kirkwood_mpp_conf(goflexnet_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(goflexnet_nand_parts), 25); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + kirkwood_ge00_init(&goflexnet_ge00_data); + kirkwood_sata_init(&goflexnet_sata_data); + + platform_device_register(&goflexnet_leds); +} + +MACHINE_START(GOFLEXNET, "Seagate GoFlex Net") + /* Maintainer: Peter Carmichael */ + .boot_params = 0x00000100, + .init_machine = goflexnet_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END + diff -urN a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c --- a/arch/arm/mach-kirkwood/guruplug-setup.c 2011-05-18 22:06:34.000000000 -0600 +++ b/arch/arm/mach-kirkwood/guruplug-setup.c 2011-06-14 14:53:22.000000000 -0600 @@ -57,22 +57,24 @@ static struct gpio_led guruplug_led_pins[] = { { - .name = "guruplug:red:health", + .name = "status:red:fault", + .default_trigger = "none", .gpio = 46, .active_low = 1, }, { - .name = "guruplug:green:health", + .name = "status:green:health", + .default_trigger = "default-on", .gpio = 47, .active_low = 1, }, { - .name = "guruplug:red:wmode", + .name = "status:red:wmode", .gpio = 48, .active_low = 1, }, { - .name = "guruplug:green:wmode", + .name = "status:green:wmode", .gpio = 49, .active_low = 1, }, diff -urN a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig --- a/arch/arm/mach-kirkwood/Kconfig 2011-05-18 22:06:34.000000000 -0600 +++ b/arch/arm/mach-kirkwood/Kconfig 2011-06-14 14:53:22.000000000 -0600 @@ -64,6 +64,18 @@ Say 'Y' here if you want your kernel to support the Seagate FreeAgent DockStar. +config MACH_GOFLEXNET + bool "Seagate GoFlex Net" + help + Say 'Y' here if you want your kernel to support the + Seagate GoFlex Net. + +config MACH_GOFLEXHOME + bool "Seagate GoFlex Home" + help + Say 'Y' here if you want your kernel to support the + Seagate GoFlex Home. + config MACH_OPENRD bool diff -urN a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile --- a/arch/arm/mach-kirkwood/Makefile 2011-05-18 22:06:34.000000000 -0600 +++ b/arch/arm/mach-kirkwood/Makefile 2011-06-14 14:53:22.000000000 -0600 @@ -8,6 +8,8 @@ obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o +obj-$(CONFIG_MACH_GOFLEXNET) += goflexnet-setup.o +obj-$(CONFIG_MACH_GOFLEXHOME) += goflexhome-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o diff -urN a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c 2011-05-18 22:06:34.000000000 -0600 +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c 2011-06-14 14:53:22.000000000 -0600 @@ -64,7 +64,25 @@ .active_low = 1, }, { - .name = "plug:green:health", + .name = "status:red:misc", + .default_trigger = "none", + .gpio = 46, + .active_low = 1, + }, + { + .name = "status:red:misc", + .default_trigger = "none", + .gpio = 46, + .active_low = 1, + }, + { + .name = "status:green:health", + .default_trigger = "none", + .gpio = 48, + .active_low = 1, + }, + { + .name = "status:blue:health", .default_trigger = "default-on", .gpio = 49, .active_low = 1, @@ -87,7 +105,8 @@ static unsigned int sheevaplug_mpp_config[] __initdata = { MPP29_GPIO, /* USB Power Enable */ MPP46_GPIO, /* LED Red */ - MPP49_GPIO, /* LED */ + MPP48_GPIO, /* LED Green */ + MPP49_GPIO, /* LED Blue */ 0 }; @@ -95,7 +114,9 @@ MPP29_GPIO, /* USB Power Enable */ MPP44_GPIO, /* SD Write Protect */ MPP47_GPIO, /* SD Card Detect */ - MPP49_GPIO, /* LED Green */ + MPP46_GPIO, /* LED Red */ + MPP48_GPIO, /* LED Green */ + MPP49_GPIO, /* LED Blue */ 0 };