diff -ruN a/arch/arm/mach-kirkwood/bubba3-gpio.c b/arch/arm/mach-kirkwood/bubba3-gpio.c --- a/arch/arm/mach-kirkwood/bubba3-gpio.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/bubba3-gpio.c 2013-11-08 01:39:48.648006378 -0700 @@ -0,0 +1,392 @@ +/* + * Excito BUBBA|3 led driver. + * + * Copyright (C) 2010 Excito Elektronik i Skåne AB + * Author: "Tor Krill" + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This driver provides an interface to the GPIO functionality on BUBBA|3 + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Mark this file for ident */ +static char* ver="0.1"; +static char* build=__DATE__ " " __TIME__; + +#define DEVNAME "bubbatwo" +#define LED_DEFAULT_FREQ 0x8000 + +/* Meta information for this module */ +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Tor Krill "); +MODULE_DESCRIPTION("BUBBA|3 led driver"); + +/* Forwards */ +static int b3_probe(struct platform_device *dev); +static int b3_remove(struct platform_device *dev); +static void b3_led_on(void); + +#define MODE_OFF 0 +#define MODE_BLINK 1 +#define MODE_LIT 2 +#define BUZZ_OFF 0 +#define BUZZ_ON 1 +#define LED_BLUE 0 +#define LED_RED 1 +#define LED_GREEN 2 +#define LED_BOOT 3 +#define LED_INSTALL LED_GREEN + +struct b3_stateinfo{ + u32 mode; + u32 freq; + u32 buzz; + u32 color; +}; + +static struct b3_stateinfo b3_data; + +static void b3_led_reset(void) +{ + gpio_set_value(B3_LED_INTERVAL,0); + udelay(1800); + gpio_set_value(B3_LED_INTERVAL,1); + udelay(10); + gpio_set_value(B3_LED_INTERVAL,0); + udelay(1800); +} + +static void b3_led_train_start(void) +{ + gpio_set_value(B3_LED_INTERVAL,1); + udelay(10); + gpio_set_value(B3_LED_INTERVAL,0); + udelay(10); + gpio_set_value(B3_LED_INTERVAL,1); + udelay(10); + gpio_set_value(B3_LED_INTERVAL,0); + udelay(1800); +} + +static void b3_led_train_end(void) +{ + gpio_set_value(B3_LED_INTERVAL,1); + udelay(10); + gpio_set_value(B3_LED_INTERVAL,0); + udelay(10); + gpio_set_value(B3_LED_INTERVAL,1); + udelay(10); + gpio_set_value(B3_LED_INTERVAL,0); + udelay(10); + gpio_set_value(B3_LED_INTERVAL,1); + udelay(10); + gpio_set_value(B3_LED_INTERVAL,0); + udelay(1800); +} + +static void b3_led_color(u32 color){ + gpio_set_value(B3_FRONT_LED_RED,0); + gpio_set_value(B3_FRONT_LED_BLUE,0); + gpio_set_value(B3_FRONT_LED_GREEN,0); + + switch(color){ + case LED_BOOT: + gpio_set_value(B3_FRONT_LED_RED,1); + gpio_set_value(B3_FRONT_LED_BLUE,1); + break; + case LED_RED: + gpio_set_value(B3_FRONT_LED_RED,1); + break; + case LED_GREEN: + gpio_set_value(B3_FRONT_LED_GREEN,1); + break; + case LED_BLUE: + default: + gpio_set_value(B3_FRONT_LED_BLUE,1); + break; + } +} + +static void b3_led_on(void) +{ + b3_led_color(b3_data.color); + + b3_led_reset(); + + b3_led_train_start(); + /* NOOP, pass through mode */ + b3_led_train_end(); + + gpio_set_value(B3_LED_INTERVAL,1); +} + +static void b3_led_off(void) +{ + gpio_set_value(B3_FRONT_LED_RED,0); + gpio_set_value(B3_FRONT_LED_BLUE,0); + gpio_set_value(B3_FRONT_LED_GREEN,0); + + b3_led_reset(); +} + +static void b3_buzz_on(void) +{ + gpio_set_value(B3_BUZZER_ENABLE,1); +} + +static void b3_buzz_off(void) +{ + gpio_set_value(B3_BUZZER_ENABLE,0); +} + + +static struct platform_device *b3_device; + +static struct platform_driver b3_driver = { + .driver = { + .name = DEVNAME, + .owner = THIS_MODULE, + }, + .probe = b3_probe, + .remove = b3_remove, +}; + +static ssize_t b3_show_ledmode(struct device *dev, struct device_attribute *attr, char *buffer) +{ + ssize_t len = 0; + switch(b3_data.mode){ + case MODE_OFF: + len = sprintf (buffer+len, "off"); + break; + case MODE_BLINK: + len = sprintf (buffer+len, "blink"); + break; + case MODE_LIT: + len = sprintf (buffer+len, "lit"); + break; + default: + len = sprintf (buffer+len, "unknown"); + } + + return len; +} + +static ssize_t b3_store_ledmode(struct device *dev, struct device_attribute *attr,const char *buffer, size_t size) +{ + + if(size<1){ + return -EINVAL; + } + /* Do a nasty shortcut here only look at first char */ + switch(buffer[0]){ + case 'o': + b3_data.mode=MODE_OFF; + b3_led_off (); + break; + case 'b': + /* For now we dont allow blink. */ + case 'l': + b3_data.mode=MODE_LIT; + b3_led_on (); + break; + default: + return -EINVAL; + } + + return size; +} + +static ssize_t b3_show_ledfreq(struct device *dev, struct device_attribute *attr, char *buffer) +{ + ssize_t len = 0; + + len = sprintf (buffer+len, "%u", b3_data.freq); + + return len; +} + +static ssize_t b3_store_ledfreq(struct device *dev, struct device_attribute *attr,const char *buffer, size_t size) +{ + + b3_data.freq = simple_strtoul(buffer,NULL,0); + + return size; +} + +static ssize_t b3_show_buzzer(struct device *dev, struct device_attribute *attr, char *buffer) +{ + ssize_t len = 0; + + len = sprintf (buffer+len, "%u", b3_data.buzz); + + return len; +} + +static ssize_t b3_store_buzzer(struct device *dev, struct device_attribute *attr,const char *buffer, size_t size) +{ + + b3_data.buzz = simple_strtoul(buffer,NULL,0); + + b3_data.buzz = (b3_data.buzz>0) ? BUZZ_ON : BUZZ_OFF; + + if(b3_data.buzz==BUZZ_ON){ + b3_buzz_on(); + }else{ + b3_buzz_off(); + } + + return size; +} + +static ssize_t b3_show_color(struct device *dev, struct device_attribute *attr, char *buffer) +{ + ssize_t len = 0; + + len = sprintf (buffer+len, "%u", b3_data.color); + + return len; +} + +static ssize_t b3_store_color(struct device *dev, struct device_attribute *attr,const char *buffer, size_t size) +{ + + b3_data.color = simple_strtoul(buffer,NULL,0); + + b3_data.color = (b3_data.color>LED_BOOT) ? LED_BOOT : b3_data.color; + + b3_led_color(b3_data.color); + + return size; +} + +static struct gpio bubba_gpios[] = { +#ifdef CONFIG_BUBBA3_INSTALL + { B3_FRONT_LED_RED, GPIOF_OUT_INIT_LOW, "Red LED"}, + { B3_FRONT_LED_BLUE, GPIOF_OUT_INIT_LOW, "Blue LED"}, + { B3_FRONT_LED_GREEN, GPIOF_OUT_INIT_HIGH, "Green LED"}, +#else + { B3_FRONT_LED_RED, GPIOF_OUT_INIT_HIGH, "Red LED"}, + { B3_FRONT_LED_BLUE, GPIOF_OUT_INIT_HIGH, "Blue LED"}, + { B3_FRONT_LED_GREEN, GPIOF_OUT_INIT_LOW, "Green LED"}, +#endif + { B3_LED_INTERVAL, GPIOF_OUT_INIT_HIGH, "LED interval"}, + { B3_BUZZER_ENABLE, GPIOF_OUT_INIT_LOW, "Buzzer"} +}; + +static int request_ioresources(void) +{ + + if(gpio_request_array(bubba_gpios, ARRAY_SIZE(bubba_gpios))<0){ + return -EINVAL; + } + + return 0; +} + +DEVICE_ATTR(ledmode, 0644, b3_show_ledmode, b3_store_ledmode); +DEVICE_ATTR(ledfreq, 0644, b3_show_ledfreq, b3_store_ledfreq); +DEVICE_ATTR(buzzer, 0644, b3_show_buzzer, b3_store_buzzer); +DEVICE_ATTR(color, 0644, b3_show_color, b3_store_color); + +static int b3_probe(struct platform_device *dev) +{ + int ret=0; + + if(request_ioresources()){ + return -EINVAL; + } + + ret = device_create_file(&b3_device->dev, &dev_attr_ledmode); + if(ret){ + return -EINVAL; + } + + ret = device_create_file(&b3_device->dev, &dev_attr_ledfreq); + if(ret){ + device_remove_file(&b3_device->dev, &dev_attr_ledmode); + return -EINVAL; + } + + ret = device_create_file(&b3_device->dev, &dev_attr_buzzer); + if(ret){ + device_remove_file(&b3_device->dev, &dev_attr_ledfreq); + device_remove_file(&b3_device->dev, &dev_attr_ledmode); + return -EINVAL; + } + + ret = device_create_file(&b3_device->dev, &dev_attr_color); + if(ret){ + device_remove_file(&b3_device->dev, &dev_attr_buzzer); + device_remove_file(&b3_device->dev, &dev_attr_ledfreq); + device_remove_file(&b3_device->dev, &dev_attr_ledmode); + return -EINVAL; + } + + b3_data.mode = MODE_LIT; + b3_data.freq = LED_DEFAULT_FREQ; + b3_data.buzz = BUZZ_OFF; +#ifdef CONFIG_BUBBA3_INSTALL + b3_data.color = LED_INSTALL; +#else + b3_data.color = LED_BOOT; +#endif + return ret; +} + +static int b3_remove(struct platform_device *dev) +{ + + device_remove_file (&b3_device->dev, &dev_attr_ledmode); + device_remove_file (&b3_device->dev, &dev_attr_ledfreq); + device_remove_file(&b3_device->dev, &dev_attr_buzzer); + device_remove_file(&b3_device->dev, &dev_attr_color); + + gpio_free_array(bubba_gpios, ARRAY_SIZE(bubba_gpios)); + return 0; +} + +static int __init bubba3_init(void){ + int result; + + if(!machine_is_bubba3()){ + return -EINVAL; + } + + + result = platform_driver_register(&b3_driver); + if (result < 0) { + printk(KERN_ERR "bubba3: Failed to register driver\n"); + return result; + } + + b3_device = platform_device_alloc(DEVNAME,-1); + platform_device_add(b3_device); + + printk(KERN_INFO "BUBBA3: driver ver %s (build %s) loaded\n",ver,build); + + return result; + +} + +static void __exit bubba3_cleanup(void){ + + platform_device_del(b3_device); + platform_driver_unregister(&b3_driver); + + printk(KERN_INFO "bubba3 driver removed\n"); + +} +/* register init and cleanup functions */ +module_init(bubba3_init); +module_exit(bubba3_cleanup); diff -ruN a/arch/arm/mach-kirkwood/bubba3-setup.c b/arch/arm/mach-kirkwood/bubba3-setup.c --- a/arch/arm/mach-kirkwood/bubba3-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/bubba3-setup.c 2013-11-08 01:39:48.648006378 -0700 @@ -0,0 +1,234 @@ +/* + * arch/arm/mach-kirkwood/bubba3-setup.c + * based on + * arch/arm/mach-kirkwood/rd88f6281-setup.c + * + * For Bubba3 miniserver from Excito + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +/***************************************************************************** + * 2048KB SPI Flash on Boot Device (Numonyx MP25P16) + ****************************************************************************/ + +static struct mtd_partition bubba3_flash_parts[] = { + { + .name = "u-boot", + .size = SZ_512K+SZ_256K, + .offset = 0, + }, + { + .name = "env", + .size = SZ_128K, + .offset = MTDPART_OFS_NXTBLK, + }, + { + .name = "data", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_NXTBLK, + }, +}; + +static const struct flash_platform_data bubba3_flash = { + .type = "m25p16", + .name = "spi_flash", + .parts = bubba3_flash_parts, + .nr_parts = ARRAY_SIZE(bubba3_flash_parts), +}; + +static struct spi_board_info __initdata bubba3_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &bubba3_flash, + .irq = -1, + .max_speed_hz = 40000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +/***************************************************************************** + * GPIO and keys + ****************************************************************************/ + +static struct gpio_keys_button bubba3_buttons[] = { + [0] = { + .code = KEY_POWER, + .gpio = B3_POWER_BUTTON, + .desc = "Power button", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data bubba3_button_data = { + .buttons = bubba3_buttons, + .nbuttons = ARRAY_SIZE(bubba3_buttons), +}; + +static struct platform_device bubba3_gpio_buttons = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &bubba3_button_data, + }, +}; + + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data bubba3_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0x08), + /* in case a hardcoded MAC address is needed uncomment next line */ + /* .mac_addr = {0x00, 0x0c, 0xc6, 0x76, 0x76, 0x2b}, */ +}; + +static struct mv643xx_eth_platform_data bubba3_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0x18), + /* in case a hardcoded MAC address is needed uncomment next line */ + /* .mac_addr = {0x00, 0x0c, 0xc6, 0x76, 0x76, 0x2c}, */ +}; + +static struct mv_sata_platform_data bubba3_sata_data = { + .n_ports = 2, +}; + +/***************************************************************************** + * Timer + ****************************************************************************/ + +static unsigned int bubba3_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_PEX_RST_OUTn, + MPP8_TW0_SDA, + MPP9_TW0_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, + MPP13_UART1_TXD, + MPP14_UART1_RXD, + MPP15_SATA0_ACTn, + MPP16_SATA1_ACTn, + MPP17_SATA0_PRESENTn, + MPP18_GPO, + MPP19_GPO, + MPP20_GE1_TXD0, + MPP21_GE1_TXD1, + MPP22_GE1_TXD2, + MPP23_GE1_TXD3, + MPP24_GE1_RXD0, + MPP25_GE1_RXD1, + MPP26_GE1_RXD2, + MPP27_GE1_RXD3, + MPP28_GPIO, + MPP29_GPIO, + MPP30_GE1_RXCTL, + MPP31_GE1_RXCLK, + MPP32_GE1_TCLKOUT, + MPP33_GE1_TXCTL, + MPP34_GPIO, + MPP35_GPIO, + MPP36_GPIO, + MPP37_GPIO, + MPP38_GPIO, + MPP39_GPIO, + MPP40_GPIO, + MPP41_GPIO, + MPP42_GPIO, + MPP43_GPIO, + MPP44_GPIO, + MPP45_GPIO, + MPP46_GPIO, + MPP47_GPIO, + MPP48_GPIO, + MPP49_GPIO, + 0 +}; + +static void __init bubba3_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + + kirkwood_mpp_conf(bubba3_mpp_config); + + kirkwood_uart0_init(); + + spi_register_board_info(bubba3_spi_slave_info, + ARRAY_SIZE(bubba3_spi_slave_info)); + kirkwood_spi_init(); + + kirkwood_i2c_init(); + + platform_device_register(&bubba3_gpio_buttons); + + /* eth0 */ + kirkwood_ge00_init(&bubba3_ge00_data); + + /* eth1 */ + if (gpio_request(28, "PHY2 reset") != 0 || + gpio_direction_input(28) != 0) // high-z + printk(KERN_ERR "can't deassert GPIO 28 (PHY2 reset)\n"); + else + kirkwood_ge01_init(&bubba3_ge01_data); + + kirkwood_sata_init(&bubba3_sata_data); + + kirkwood_ehci_init(); + +} + +static int __init bubba3_pci_init(void) +{ + if (machine_is_bubba3()) + kirkwood_pcie_init( KW_PCIE0 | KW_PCIE1 ); + + return 0; +} +subsys_initcall(bubba3_pci_init); + +MACHINE_START(BUBBA3, "BUBBA3 Kirkwood based miniserver") + /* Maintainer: Tor Krill */ + .atag_offset = 0x100, + .init_machine = bubba3_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END diff -ruN a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h --- a/arch/arm/mach-kirkwood/common.h 2013-11-03 16:41:51.000000000 -0700 +++ b/arch/arm/mach-kirkwood/common.h 2013-11-08 01:41:40.952365272 -0700 @@ -58,13 +58,6 @@ void kirkwood_restart(enum reboot_mode, const char *); void kirkwood_clk_init(void); -/* board init functions for boards not fully converted to fdt */ -#ifdef CONFIG_MACH_MV88F6281GTW_GE_DT -void mv88f6281gtw_ge_init(void); -#else -static inline void mv88f6281gtw_ge_init(void) {}; -#endif - /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); diff -ruN a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c --- a/arch/arm/mach-kirkwood/dockstar-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/dockstar-setup.c 2013-11-08 01:39:48.648006378 -0700 @@ -0,0 +1,115 @@ +/* + * arch/arm/mach-kirkwood/dockstar-setup.c + * + * Seagate FreeAgent DockStar Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition dockstar_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "pogoplug", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_32M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data dockstar_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct gpio_led dockstar_led_pins[] = { + { + .name = "status:green:health", + .default_trigger = "default-on", + .gpio = 46, + .active_low = 1, + }, + { + .name = "status:orange:fault", + .default_trigger = "none", + .gpio = 47, + .active_low = 1, + } +}; + +static struct gpio_led_platform_data dockstar_led_data = { + .leds = dockstar_led_pins, + .num_leds = ARRAY_SIZE(dockstar_led_pins), +}; + +static struct platform_device dockstar_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &dockstar_led_data, + } +}; + +static unsigned int dockstar_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP46_GPIO, /* LED Green */ + MPP47_GPIO, /* LED Orange */ + 0 +}; + +static void __init dockstar_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + + /* setup gpio pin select */ + kirkwood_mpp_conf(dockstar_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + pr_err("can't set up GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + + kirkwood_ge00_init(&dockstar_ge00_data); + + platform_device_register(&dockstar_leds); +} + +MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar") + .atag_offset = 0x100, + .init_machine = dockstar_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END diff -ruN a/arch/arm/mach-kirkwood/goflexhome-setup.c b/arch/arm/mach-kirkwood/goflexhome-setup.c --- a/arch/arm/mach-kirkwood/goflexhome-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/goflexhome-setup.c 2013-11-08 01:39:48.648006378 -0700 @@ -0,0 +1,124 @@ +/* + * arch/arm/mach-kirkwood/goflexhome-setup.c + * + * Seagate GoFlex Home Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition goflexhome_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_2M + SZ_4M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data goflexhome_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv_sata_platform_data goflexhome_sata_data = { + .n_ports = 1, +}; + +static struct gpio_led goflexhome_led_pins[] = { + { + .name = "status:green:health", + .default_trigger = "default-on", + .gpio = 46, + .active_low = 1, + }, + { + .name = "status:orange:fault", + .default_trigger = "none", + .gpio = 47, + .active_low = 1, + }, + { + .name = "status:white:misc", + .default_trigger = "ide-disk", + .gpio = 40, + .active_low = 0, + } +}; + +static struct gpio_led_platform_data goflexhome_led_data = { + .leds = goflexhome_led_pins, + .num_leds = ARRAY_SIZE(goflexhome_led_pins), +}; + +static struct platform_device goflexhome_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &goflexhome_led_data, + } +}; + +static unsigned int goflexhome_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP47_GPIO, /* LED Orange */ + MPP46_GPIO, /* LED Green */ + MPP40_GPIO, /* LED White */ + 0 +}; + +static void __init goflexhome_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + + /* setup gpio pin select */ + kirkwood_mpp_conf(goflexhome_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(goflexhome_nand_parts), 40); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + kirkwood_ge00_init(&goflexhome_ge00_data); + kirkwood_sata_init(&goflexhome_sata_data); + + platform_device_register(&goflexhome_leds); +} + +MACHINE_START(GOFLEXHOME, "Seagate GoFlex Home") + /* Maintainer: Peter Carmichael */ + .atag_offset = 0x100, + .init_machine = goflexhome_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END + diff -ruN a/arch/arm/mach-kirkwood/goflexnet-setup.c b/arch/arm/mach-kirkwood/goflexnet-setup.c --- a/arch/arm/mach-kirkwood/goflexnet-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/goflexnet-setup.c 2013-11-08 01:39:48.658006766 -0700 @@ -0,0 +1,177 @@ +/* + * arch/arm/mach-kirkwood/goflexnet-setup.c + * + * Seagate GoFlex Net Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition goflexnet_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "pogoplug", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_32M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data goflexnet_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv_sata_platform_data goflexnet_sata_data = { + .n_ports = 2, +}; + +static struct gpio_led goflexnet_led_pins[] = { + { + .name = "status:green:health", + .default_trigger = "default-on", + .gpio = 46, // 0x4000 + .active_low = 1, + }, + { + .name = "status:orange:fault", + .default_trigger = "none", + .gpio = 47, // 0x8000 + .active_low = 1, + }, + { + .name = "status:white:left0", + .default_trigger = "none", + .gpio = 42, // 0x0400 + .active_low = 0, + }, + { + .name = "status:white:left1", + .default_trigger = "none", + .gpio = 43, // 0x0800 + .active_low = 0, + }, + { + .name = "status:white:left2", + .default_trigger = "none", + .gpio = 44, // 0x1000 + .active_low = 0, + }, + { + .name = "status:white:left3", + .default_trigger = "none", + .gpio = 45, // 0x2000 + .active_low = 0, + }, + { + .name = "status:white:right0", + .default_trigger = "none", + .gpio = 38, // 0x0040 + .active_low = 0, + }, + { + .name = "status:white:right1", + .default_trigger = "none", + .gpio = 39, // 0x0080 + .active_low = 0, + }, + { + .name = "status:white:right2", + .default_trigger = "none", + .gpio = 40, // 0x0100 + .active_low = 0, + }, + { + .name = "status:white:right3", + .default_trigger = "none", + .gpio = 41, // 0x0200 + .active_low = 0, + } +}; + +static struct gpio_led_platform_data goflexnet_led_data = { + .leds = goflexnet_led_pins, + .num_leds = ARRAY_SIZE(goflexnet_led_pins), +}; + +static struct platform_device goflexnet_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &goflexnet_led_data, + } +}; + +static unsigned int goflexnet_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP47_GPIO, /* LED Orange */ + MPP46_GPIO, /* LED Green */ + MPP45_GPIO, /* LED Left Capacity 3 */ + MPP44_GPIO, /* LED Left Capacity 2 */ + MPP43_GPIO, /* LED Left Capacity 1 */ + MPP42_GPIO, /* LED Left Capacity 0 */ + MPP41_GPIO, /* LED Right Capacity 3 */ + MPP40_GPIO, /* LED Right Capacity 2 */ + MPP39_GPIO, /* LED Right Capacity 1 */ + MPP38_GPIO, /* LED Right Capacity 0 */ + 0 +}; + +static void __init goflexnet_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + + /* setup gpio pin select */ + kirkwood_mpp_conf(goflexnet_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(goflexnet_nand_parts), 40); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + kirkwood_ge00_init(&goflexnet_ge00_data); + kirkwood_sata_init(&goflexnet_sata_data); + + platform_device_register(&goflexnet_leds); +} + +MACHINE_START(GOFLEXNET, "Seagate GoFlex Net") + /* Maintainer: Peter Carmichael */ + .atag_offset = 0x100, + .init_machine = goflexnet_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END + diff -ruN a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c --- a/arch/arm/mach-kirkwood/guruplug-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/guruplug-setup.c 2013-11-08 01:39:48.658006766 -0700 @@ -0,0 +1,228 @@ +/* + * arch/arm/mach-kirkwood/guruplug-setup.c + * + * Marvell GuruPlug Reference Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition dreamplug_partitions[] = { + { + .name = "u-boot", + .size = SZ_512K, + .offset = 0, + }, { + .name = "u-boot env", + .size = SZ_64K, + .offset = SZ_512K + SZ_512K, + }, +}; + +static const struct flash_platform_data dreamplug_spi_slave_data = { + .type = "mx25l1606e", + .name = "spi_flash", + .parts = dreamplug_partitions, + .nr_parts = ARRAY_SIZE(dreamplug_partitions), +}; + +static struct spi_board_info __initdata dreamplug_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &dreamplug_spi_slave_data, + .irq = -1, + .max_speed_hz = 50000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct mtd_partition guruplug_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data guruplug_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data guruplug_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv_sata_platform_data guruplug_sata_data = { + .n_ports = 1, +}; + +static struct mvsdio_platform_data guruplug_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ + .gpio_card_detect = -1, + .gpio_write_protect = -1, +}; + +static struct gpio_led guruplug_led_pins[] = { + { + .name = "status:red:fault", + .default_trigger = "none", + .gpio = 46, + .active_low = 1, + }, + { + .name = "status:green:health", + .default_trigger = "default-on", + .gpio = 47, + .active_low = 1, + }, + { + .name = "status:red:wmode", + .gpio = 48, + .active_low = 1, + }, + { + .name = "status:green:wmode", + .gpio = 49, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data guruplug_led_data = { + .leds = guruplug_led_pins, + .num_leds = ARRAY_SIZE(guruplug_led_pins), +}; + +static struct platform_device guruplug_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &guruplug_led_data, + } +}; + +static struct gpio_led dreamplug_led_pins[] = { + { + .name = "status:blue:bt", + .gpio = 47, + .active_low = 1, + }, + { + .name = "status:green:wifi", + .gpio = 48, + .active_low = 1, + }, + { + .name = "status:blue:ap", + .gpio = 49, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data dreamplug_led_data = { + .leds = dreamplug_led_pins, + .num_leds = ARRAY_SIZE(dreamplug_led_pins), +}; + +static unsigned int dreamplug_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP47_GPIO, /* Bluetooth LED */ + MPP48_GPIO, /* Wifi LED */ + MPP49_GPIO, /* Wifi AP LED */ + 0 +}; + + +static unsigned int guruplug_mpp_config[] __initdata = { + MPP46_GPIO, /* M_RLED */ + MPP47_GPIO, /* M_GLED */ + MPP48_GPIO, /* B_RLED */ + MPP49_GPIO, /* B_GLED */ + 0 +}; + +static void __init guruplug_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + + if (machine_is_guruplug()) { + kirkwood_mpp_conf(guruplug_mpp_config); + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25); + } + + if (machine_is_dreamplug()) { + kirkwood_mpp_conf(dreamplug_mpp_config); + kirkwood_uart0_init(); + spi_register_board_info(dreamplug_spi_slave_info, + ARRAY_SIZE(dreamplug_spi_slave_info)); + kirkwood_spi_init(); + guruplug_leds.dev.platform_data = &dreamplug_led_data; + } + + kirkwood_ehci_init(); + kirkwood_ge00_init(&guruplug_ge00_data); + kirkwood_ge01_init(&guruplug_ge01_data); + kirkwood_sata_init(&guruplug_sata_data); + kirkwood_sdio_init(&guruplug_mvsdio_data); + + platform_device_register(&guruplug_leds); +} + +#ifdef CONFIG_MACH_GURUPLUG +MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board") + /* Maintainer: Siddarth Gore */ + .atag_offset = 0x100, + .init_machine = guruplug_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_DREAMPLUG +MACHINE_START(DREAMPLUG, "Marvell DreamPlug Reference Board") + /* Maintainer: ? */ + .atag_offset = 0x100, + .init_machine = guruplug_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END +#endif diff -ruN a/arch/arm/mach-kirkwood/iconnect-setup.c b/arch/arm/mach-kirkwood/iconnect-setup.c --- a/arch/arm/mach-kirkwood/iconnect-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/iconnect-setup.c 2013-11-08 01:39:48.658006766 -0700 @@ -0,0 +1,204 @@ +/* + * arch/arm/mach-kirkwood/iconnect-setup.c + * + * Iomega iConnect Wireless + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition iconnect_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_1M + SZ_2M + }, { + .name = "rootfs", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_32M, + }, { + .name = "data", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data iconnect_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(11), +}; + +static struct gpio_led iconnect_led_pins[] = { + { + .name = "iconnect:led_level", + .default_trigger = "default-on", + .gpio = 41, + }, + { + .name = "iconnect:blue:power", + .default_trigger = "default-on", + .gpio = 42, + }, + { + .name = "iconnect:red:power", + .gpio = 43, + }, + { + .name = "iconnect:blue:usb1", + .gpio = 44, + }, + { + .name = "iconnect:blue:usb2", + .gpio = 45, + }, + { + .name = "iconnect:blue:usb3", + .gpio = 46, + }, + { + .name = "iconnect:blue:usb4", + .gpio = 47, + }, + { + .name = "iconnect:blue:otb", + .gpio = 48, + }, +}; + +static struct gpio_led_platform_data iconnect_led_data = { + .leds = iconnect_led_pins, + .num_leds = ARRAY_SIZE(iconnect_led_pins), +}; + +static struct platform_device iconnect_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &iconnect_led_data, + } +}; + +#define ICONNECT_GPIO_KEY_RESET 12 +#define ICONNECT_GPIO_KEY_OTB 35 + +#define ICONNECT_SW_RESET 0x00 +#define ICONNECT_SW_OTB 0x01 + +static struct gpio_keys_button iconnect_buttons[] = { + { + .type = EV_SW, + .code = ICONNECT_SW_RESET, + .gpio = ICONNECT_GPIO_KEY_RESET, + .desc = "Reset Button", + .active_low = 1, + .debounce_interval = 100, + }, + { + .type = EV_SW, + .code = ICONNECT_SW_OTB, + .gpio = ICONNECT_GPIO_KEY_OTB, + .desc = "OTB Button", + .active_low = 1, + .debounce_interval = 100, + }, +}; + +static struct gpio_keys_platform_data iconnect_button_data = { + .buttons = iconnect_buttons, + .nbuttons = ARRAY_SIZE(iconnect_buttons), +}; + +static struct platform_device iconnect_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &iconnect_button_data, + }, +}; + +static unsigned int iconnect_mpp_config[] __initdata = { + MPP12_GPIO, /*Input for reset button*/ + MPP35_GPIO, /*Input for OTB button*/ + MPP41_GPIO, + MPP42_GPIO, + MPP43_GPIO, + MPP44_GPIO, + MPP45_GPIO, + MPP46_GPIO, + MPP47_GPIO, + MPP48_GPIO, + 0 +}; + +static struct i2c_board_info __initdata iconnect_i2c_rtc = { + I2C_BOARD_INFO("lm63", 0x4c), +}; + +static void __init iconnect_init(void) +{ + u32 dev, rev; + + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(iconnect_mpp_config); + + kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 40); + kirkwood_ehci_init(); + + kirkwood_ge00_init(&iconnect_ge00_data); + kirkwood_pcie_id(&dev, &rev); + + kirkwood_uart0_init(); + + platform_device_register(&iconnect_leds); + platform_device_register(&iconnect_button_device); + + kirkwood_i2c_init(); + i2c_register_board_info(0, &iconnect_i2c_rtc, 1); + +} + +static int __init iconnect_pci_init(void) +{ + if (machine_is_iconnect()) + kirkwood_pcie_init(KW_PCIE0); + + return 0; +} +subsys_initcall(iconnect_pci_init); + + +MACHINE_START(ICONNECT, "Iomega iConnect Wireless") + .atag_offset = 0x100, + .init_machine = iconnect_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END diff -ruN a/arch/arm/mach-kirkwood/ionics-stratus-setup.c b/arch/arm/mach-kirkwood/ionics-stratus-setup.c --- a/arch/arm/mach-kirkwood/ionics-stratus-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/ionics-stratus-setup.c 2013-11-08 01:39:48.658006766 -0700 @@ -0,0 +1,137 @@ +/* + * arch/arm/mach-kirkwood/ionics-stratus-setup.c + * + * Ionics Stratus Board Setup arcNumber 4184 + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition ionics_stratus_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data ionics_stratus_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mvsdio_platform_data ionics_stratus_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +static struct gpio_led ionics_stratus_led_pins[] = { + { + .name = "status:green:led1", + .default_trigger = "none", + .gpio = 44, + .active_low = 1, + }, + { + .name = "status:green:led2", + .default_trigger = "none", + .gpio = 40, + .active_low = 1, + }, + { + .name = "status:green:led3", + .default_trigger = "default-on", + .gpio = 36, + .active_low = 1, + }, + { + .name = "status:green:led4", + .default_trigger = "default-on", + .gpio = 39, + .active_low = 1, + }, + +}; + +static struct gpio_led_platform_data ionics_stratus_led_data = { + .leds = ionics_stratus_led_pins, + .num_leds = ARRAY_SIZE(ionics_stratus_led_pins), +}; + +static struct platform_device ionics_stratus_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &ionics_stratus_led_data, + } +}; + +static unsigned int ionics_stratus_mpp_config[] __initdata = { + MPP21_GPIO, /* USB PORT 1 Pw Enable */ + MPP32_GPIO, /* USB PORT 2 Pw Enable */ + MPP48_GPIO, /* WIFI Power Down */ + MPP49_GPIO, /* WIFI Host Wakeup */ + MPP42_GPIO, /* WIFI MAC Wakeup */ + MPP44_GPIO, /* LED 1 */ + MPP40_GPIO, /* LED 2 */ + MPP36_GPIO, /* LED 3 */ + MPP39_GPIO, /* LED 4 */ + MPP23_GPIO, /* BTN 1 */ + MPP37_GPIO, /* BTN 2 */ + MPP38_GPIO, /* BTN 3 */ + 0 +}; + +static void __init ionics_stratus_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + + /* setup gpio pin select */ + kirkwood_mpp_conf(ionics_stratus_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(ionics_stratus_nand_parts), 25); + + kirkwood_ehci_init(); + + kirkwood_ge00_init(&ionics_stratus_ge00_data); + kirkwood_sdio_init(&ionics_stratus_mvsdio_data); + + platform_device_register(&ionics_stratus_leds); +} + +MACHINE_START(IONICS_STRATUS, "Ionics Plug Computer Plus - Stratus") + /* Maintainer: Mike Brown */ + .atag_offset = 0x100, + .init_machine = ionics_stratus_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END diff -ruN a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig --- a/arch/arm/mach-kirkwood/Kconfig 2013-11-03 16:41:51.000000000 -0700 +++ b/arch/arm/mach-kirkwood/Kconfig 2013-11-08 01:39:48.688007930 -0700 @@ -12,6 +12,48 @@ Say 'Y' here if you want your kernel to support the LaCie d2 Network v2 NAS. +config MACH_DOCKSTAR + bool "Seagate FreeAgent DockStar" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + Seagate FreeAgent DockStar. + +config MACH_ESATA_SHEEVAPLUG + bool "Marvell eSATA SheevaPlug Reference Board" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + Marvell eSATA SheevaPlug Reference Board. + +config MACH_GURUPLUG + bool "Marvell GuruPlug Reference Board" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + Marvell GuruPlug Reference Board. + +config MACH_DREAMPLUG + bool "Marvell DreamPlug Reference Board" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + Marvell DreamPlug Reference Board. + +config MACH_INETSPACE_V2 + bool "LaCie Internet Space v2 NAS Board" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + LaCie Internet Space v2 NAS. + +config MACH_MV88F6281GTW_GE + bool "Marvell 88F6281 GTW GE Board" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + Marvell 88F6281 GTW GE Board. + config MACH_NET2BIG_V2 bool "LaCie 2Big Network v2 NAS Board" select KIRKWOOD_LEGACY @@ -26,6 +68,20 @@ Say 'Y' here if you want your kernel to support the LaCie 5Big Network v2 NAS. +config MACH_NETSPACE_MAX_V2 + bool "LaCie Network Space Max v2 NAS Board" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + LaCie Network Space Max v2 NAS. + +config MACH_NETSPACE_V2 + bool "LaCie Network Space v2 NAS Board" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + LaCie Network Space v2 NAS. + config MACH_OPENRD select KIRKWOOD_LEGACY bool @@ -51,6 +107,13 @@ Say 'Y' here if you want your kernel to support the Marvell OpenRD Ultimate Board. +config MACH_BUBBA3 + bool "Bubba3 miniserver" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + Bubba3 miniserver. + config MACH_RD88F6192_NAS bool "Marvell RD-88F6192-NAS Reference Board" select KIRKWOOD_LEGACY @@ -65,6 +128,13 @@ Say 'Y' here if you want your kernel to support the Marvell RD-88F6281 Reference Board. +config MACH_SHEEVAPLUG + bool "Marvell SheevaPlug Reference Board" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + Marvell SheevaPlug Reference Board. + config MACH_T5325 bool "HP t5325 Thin Client" select KIRKWOOD_LEGACY @@ -88,6 +158,83 @@ QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS devices. +config MACH_GOFLEXNET + bool "Seagate GoFlex Net" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + Seagate GoFlex Net. + +config MACH_GOFLEXHOME + bool "Seagate GoFlex Home" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + Seagate GoFlex Home. + +config MACH_ICONNECT + bool "Iomega iConnect Wireless" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + Iomega iConnect Wireless. + +config MACH_POGOPLUGV4 + bool "Pogoplug Series 4" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + Pogoplug Series 4. + +config MACH_POGO_E02 + bool "CE Pogoplug E02" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + CloudEngines Pogoplug e02. + +config MACH_NAS6210 + bool "RaidSonic ICY BOX IB-NAS6210" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + RaidSonic ICY BOX IB-NAS6210 device. + +config MACH_TOPKICK + bool "USI Topkick" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + USI Topkick. + +config MACH_IONICS_STRATUS + bool "Ionics Stratus" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + Ionics Stratus. + +config MACH_NSA310 + bool "ZyXEL NSA310 1-Bay Power Media Server" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + ZyXEL NSA310. + +config MACH_NSA320 + bool "ZyXEL NSA320 2-Bay Power Media Server" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + ZyXel NSA320. + +config MACH_NSA325 + bool "ZyXEL NSA325 2-Bay Power Media Server" + select KIRKWOOD_LEGACY + help + Say 'Y' here if you want your kernel to support the + ZyXel NSA325. + comment "Device tree entries" config ARCH_KIRKWOOD_DT diff -ruN a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile --- a/arch/arm/mach-kirkwood/Makefile 2013-11-03 16:41:51.000000000 -0700 +++ b/arch/arm/mach-kirkwood/Makefile 2013-11-08 01:39:48.698008319 -0700 @@ -1,14 +1,35 @@ obj-y += common.o pcie.o obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o +obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o +obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o +obj-$(CONFIG_MACH_DREAMPLUG) += guruplug-setup.o +obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o +obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o +obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_T5325) += t5325-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o +obj-$(CONFIG_MACH_GOFLEXNET) += goflexnet-setup.o +obj-$(CONFIG_MACH_GOFLEXHOME) += goflexhome-setup.o +obj-$(CONFIG_MACH_ICONNECT) += iconnect-setup.o +obj-$(CONFIG_MACH_POGOPLUGV4) += pogoplugv4-setup.o +obj-$(CONFIG_MACH_POGO_E02) += pogo_e02-setup.o +obj-$(CONFIG_MACH_NAS6210) += nas6210-setup.o +obj-$(CONFIG_MACH_TOPKICK) += topkick-setup.o +obj-$(CONFIG_MACH_IONICS_STRATUS) += ionics-stratus-setup.o +obj-$(CONFIG_MACH_BUBBA3) += bubba3-setup.o bubba3-gpio.o +obj-$(CONFIG_MACH_NSA310) += nsa310-setup.o +obj-$(CONFIG_MACH_NSA320) += nsa320-setup.o +obj-$(CONFIG_MACH_NSA325) += nsa325-setup.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o obj-$(CONFIG_MACH_MV88F6281GTW_GE_DT) += board-mv88f6281gtw_ge.o diff -ruN a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c --- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c 2013-11-08 01:39:48.698008319 -0700 @@ -0,0 +1,172 @@ +/* + * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c + * + * Marvell 88F6281 GTW GE Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_NONE, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, +}; + +static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = { + .port_names[0] = "lan1", + .port_names[1] = "lan2", + .port_names[2] = "lan3", + .port_names[3] = "lan4", + .port_names[4] = "wan", + .port_names[5] = "cpu", +}; + +static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = { + .nr_chips = 1, + .chip = &mv88f6281gtw_ge_switch_chip_data, +}; + +static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = { + .type = "mx25l12805d", +}; + +static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &mv88f6281gtw_ge_spi_slave_data, + .irq = -1, + .max_speed_hz = 50000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = { + { + .code = KEY_RESTART, + .gpio = 47, + .desc = "SWR Button", + .active_low = 1, + }, { + .code = KEY_WPS_BUTTON, + .gpio = 46, + .desc = "WPS Button", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = { + .buttons = mv88f6281gtw_ge_button_pins, + .nbuttons = ARRAY_SIZE(mv88f6281gtw_ge_button_pins), +}; + +static struct platform_device mv88f6281gtw_ge_buttons = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &mv88f6281gtw_ge_button_data, + }, +}; + +static struct gpio_led mv88f6281gtw_ge_led_pins[] = { + { + .name = "gtw:green:Status", + .gpio = 20, + .active_low = 0, + }, { + .name = "gtw:red:Status", + .gpio = 21, + .active_low = 0, + }, { + .name = "gtw:green:USB", + .gpio = 12, + .active_low = 0, + }, +}; + +static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = { + .leds = mv88f6281gtw_ge_led_pins, + .num_leds = ARRAY_SIZE(mv88f6281gtw_ge_led_pins), +}; + +static struct platform_device mv88f6281gtw_ge_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &mv88f6281gtw_ge_led_data, + }, +}; + +static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = { + MPP12_GPO, /* Status#_USB pin */ + MPP20_GPIO, /* Status#_GLED pin */ + MPP21_GPIO, /* Status#_RLED pin */ + MPP46_GPIO, /* WPS_Switch pin */ + MPP47_GPIO, /* SW_Init pin */ + 0 +}; + +static void __init mv88f6281gtw_ge_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data); + kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ); + spi_register_board_info(mv88f6281gtw_ge_spi_slave_info, + ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info)); + kirkwood_spi_init(); + kirkwood_uart0_init(); + platform_device_register(&mv88f6281gtw_ge_leds); + platform_device_register(&mv88f6281gtw_ge_buttons); +} + +static int __init mv88f6281gtw_ge_pci_init(void) +{ + if (machine_is_mv88f6281gtw_ge()) + kirkwood_pcie_init(KW_PCIE0); + + return 0; +} +subsys_initcall(mv88f6281gtw_ge_pci_init); + +MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board") + /* Maintainer: Lennert Buytenhek */ + .atag_offset = 0x100, + .init_machine = mv88f6281gtw_ge_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END diff -ruN a/arch/arm/mach-kirkwood/nas6210-setup.c b/arch/arm/mach-kirkwood/nas6210-setup.c --- a/arch/arm/mach-kirkwood/nas6210-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/nas6210-setup.c 2013-11-08 01:39:48.708008707 -0700 @@ -0,0 +1,186 @@ +/* + * arch/arm/mach-kirkwood/nas6210-setup.c + * + * Raidsonic ICYBOX NAS6210 Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +#define NAS6210_GPIO_POWER_OFF 24 + +static struct mtd_partition nas6210_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = 6*SZ_1M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data nas6210_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static struct mv_sata_platform_data nas6210_sata_data = { + .n_ports = 2, +}; + +static struct gpio_led nas6210_led_pins[] = { + { + .name = "status:green:power", + .default_trigger = "default-on", + .gpio = 25, + .active_low = 0, + }, + { + .name = "status:red:power", + .default_trigger = "none", + .gpio = 22, + .active_low = 0, + }, + { + .name = "status:red:usb_copy", + .default_trigger = "none", + .gpio = 27, + .active_low = 0, + }, +}; + +static struct gpio_led_platform_data nas6210_led_data = { + .leds = nas6210_led_pins, + .num_leds = ARRAY_SIZE(nas6210_led_pins), +}; + +static struct platform_device nas6210_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &nas6210_led_data, + } +}; + +static struct gpio_keys_button nas6210_buttons[] = { + { + .code = KEY_COPY, + .gpio = 29, + .desc = "USB Copy", + .active_low = 1, + }, + { + .code = KEY_RESTART, + .gpio = 28, + .desc = "Reset", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data nas6210_button_data = { + .buttons = nas6210_buttons, + .nbuttons = ARRAY_SIZE(nas6210_buttons), +}; + +static struct platform_device nas6210_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &nas6210_button_data, + } +}; + +static unsigned int nas6210_mpp_config[] __initdata = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP22_GPIO, /* Power LED red */ + MPP24_GPIO, /* Power off device */ + MPP25_GPIO, /* Power LED green */ + MPP27_GPIO, /* USB transfer LED */ + MPP28_GPIO, /* Reset button */ + MPP29_GPIO, /* USB Copy button */ + 0 +}; + +static void nas6210_power_off(void) +{ + gpio_set_value(NAS6210_GPIO_POWER_OFF, 1); +} + +static void __init nas6210_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(nas6210_mpp_config); + + kirkwood_nand_init(ARRAY_AND_SIZE(nas6210_nand_parts), 25); + kirkwood_ehci_init(); + kirkwood_ge00_init(&nas6210_ge00_data); + kirkwood_sata_init(&nas6210_sata_data); + kirkwood_uart0_init(); + platform_device_register(&nas6210_leds); + platform_device_register(&nas6210_button_device); + if (gpio_request(NAS6210_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(NAS6210_GPIO_POWER_OFF, 0) == 0) + pm_power_off = nas6210_power_off; + else + pr_err("nas6210: failed to configure power-off GPIO\n"); +} + +static int __init nas6210_pci_init(void) +{ + if (machine_is_nas6210()) { + u32 dev, rev; + + kirkwood_pcie_id(&dev, &rev); + if (dev == MV88F6282_DEV_ID) + kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0); + else + kirkwood_pcie_init(KW_PCIE0); + } + + return 0; +} +subsys_initcall(nas6210_pci_init); + +MACHINE_START(NAS6210, "RaidSonic ICY BOX IB-NAS6210") + /* Maintainer: */ + .atag_offset = 0x100, + .init_machine = nas6210_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END diff -ruN a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c 2013-11-08 01:39:48.708008707 -0700 @@ -0,0 +1,293 @@ +/* + * arch/arm/mach-kirkwood/netspace_v2-setup.c + * + * LaCie Network Space v2 board setup + * + * Copyright (C) 2009 Simon Guinot + * Copyright (C) 2009 Benoît Canet + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" +#include "lacie_v2-common.h" + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data netspace_v2_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ + +static struct mv_sata_platform_data netspace_v2_sata_data = { + .n_ports = 2, +}; + +/***************************************************************************** + * GPIO keys + ****************************************************************************/ + +#define NETSPACE_V2_PUSH_BUTTON 32 + +static struct gpio_keys_button netspace_v2_buttons[] = { + [0] = { + .code = KEY_POWER, + .gpio = NETSPACE_V2_PUSH_BUTTON, + .desc = "Power push button", + .active_low = 0, + }, +}; + +static struct gpio_keys_platform_data netspace_v2_button_data = { + .buttons = netspace_v2_buttons, + .nbuttons = ARRAY_SIZE(netspace_v2_buttons), +}; + +static struct platform_device netspace_v2_gpio_buttons = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &netspace_v2_button_data, + }, +}; + +/***************************************************************************** + * GPIO LEDs + ****************************************************************************/ + +#define NETSPACE_V2_GPIO_RED_LED 12 + +static struct gpio_led netspace_v2_gpio_led_pins[] = { + { + .name = "ns_v2:red:fail", + .gpio = NETSPACE_V2_GPIO_RED_LED, + }, +}; + +static struct gpio_led_platform_data netspace_v2_gpio_leds_data = { + .num_leds = ARRAY_SIZE(netspace_v2_gpio_led_pins), + .leds = netspace_v2_gpio_led_pins, +}; + +static struct platform_device netspace_v2_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &netspace_v2_gpio_leds_data, + }, +}; + +/***************************************************************************** + * Dual-GPIO CPLD LEDs + ****************************************************************************/ + +#define NETSPACE_V2_GPIO_BLUE_LED_SLOW 29 +#define NETSPACE_V2_GPIO_BLUE_LED_CMD 30 + +static struct ns2_led netspace_v2_led_pins[] = { + { + .name = "ns_v2:blue:sata", + .cmd = NETSPACE_V2_GPIO_BLUE_LED_CMD, + .slow = NETSPACE_V2_GPIO_BLUE_LED_SLOW, + }, +}; + +static struct ns2_led_platform_data netspace_v2_leds_data = { + .num_leds = ARRAY_SIZE(netspace_v2_led_pins), + .leds = netspace_v2_led_pins, +}; + +static struct platform_device netspace_v2_leds = { + .name = "leds-ns2", + .id = -1, + .dev = { + .platform_data = &netspace_v2_leds_data, + }, +}; + +/***************************************************************************** + * GPIO fan + ****************************************************************************/ + +/* Designed for fan 40x40x16: ADDA AD0412LB-D50 6000rpm@12v */ +static struct gpio_fan_speed netspace_max_v2_fan_speed[] = { + { 0, 0 }, + { 1500, 15 }, + { 1700, 14 }, + { 1800, 13 }, + { 2100, 12 }, + { 3100, 11 }, + { 3300, 10 }, + { 4300, 9 }, + { 5500, 8 }, +}; + +static unsigned netspace_max_v2_fan_ctrl[] = { 22, 7, 33, 23 }; + +static struct gpio_fan_alarm netspace_max_v2_fan_alarm = { + .gpio = 25, + .active_low = 1, +}; + +static struct gpio_fan_platform_data netspace_max_v2_fan_data = { + .num_ctrl = ARRAY_SIZE(netspace_max_v2_fan_ctrl), + .ctrl = netspace_max_v2_fan_ctrl, + .alarm = &netspace_max_v2_fan_alarm, + .num_speed = ARRAY_SIZE(netspace_max_v2_fan_speed), + .speed = netspace_max_v2_fan_speed, +}; + +static struct platform_device netspace_max_v2_gpio_fan = { + .name = "gpio-fan", + .id = -1, + .dev = { + .platform_data = &netspace_max_v2_fan_data, + }, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static unsigned int netspace_v2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Fan speed (bit 1) */ + MPP8_TW0_SDA, + MPP9_TW0_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, /* Red led */ + MPP14_GPIO, /* USB fuse */ + MPP16_GPIO, /* SATA 0 power */ + MPP17_GPIO, /* SATA 1 power */ + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_SATA1_ACTn, + MPP21_SATA0_ACTn, + MPP22_GPIO, /* Fan speed (bit 0) */ + MPP23_GPIO, /* Fan power */ + MPP24_GPIO, /* USB mode select */ + MPP25_GPIO, /* Fan rotation fail */ + MPP26_GPIO, /* USB device vbus */ + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* Blue led (slow register) */ + MPP30_GPIO, /* Blue led (command register) */ + MPP31_GPIO, /* Board power off */ + MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ + MPP33_GPO, /* Fan speed (bit 2) */ + 0 +}; + +#define NETSPACE_V2_GPIO_POWER_OFF 31 + +static void netspace_v2_power_off(void) +{ + gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1); +} + +static void __init netspace_v2_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(netspace_v2_mpp_config); + + if (machine_is_netspace_max_v2()) + lacie_v2_hdd_power_init(2); + else + lacie_v2_hdd_power_init(1); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&netspace_v2_ge00_data); + kirkwood_sata_init(&netspace_v2_sata_data); + kirkwood_uart0_init(); + lacie_v2_register_flash(); + lacie_v2_register_i2c_devices(); + + platform_device_register(&netspace_v2_leds); + platform_device_register(&netspace_v2_gpio_leds); + platform_device_register(&netspace_v2_gpio_buttons); + if (machine_is_netspace_max_v2()) + platform_device_register(&netspace_max_v2_gpio_fan); + + if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0) + pm_power_off = netspace_v2_power_off; + else + pr_err("netspace_v2: failed to configure power-off GPIO\n"); +} + +#ifdef CONFIG_MACH_NETSPACE_V2 +MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") + .atag_offset = 0x100, + .init_machine = netspace_v2_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_INETSPACE_V2 +MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2") + .atag_offset = 0x100, + .init_machine = netspace_v2_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_NETSPACE_MAX_V2 +MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2") + .atag_offset = 0x100, + .init_machine = netspace_v2_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END +#endif diff -ruN a/arch/arm/mach-kirkwood/nsa310-setup.c b/arch/arm/mach-kirkwood/nsa310-setup.c --- a/arch/arm/mach-kirkwood/nsa310-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/nsa310-setup.c 2013-11-08 01:39:48.708008707 -0700 @@ -0,0 +1,359 @@ +/* + * arch/arm/mach-kirkwood/nsa310-setup.c + * + * Zyxel NSA-310 Setup, by AA666 and Peeter123 + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" +#include +#include + +static void nsa310_timerfunc(unsigned long data); +static DEFINE_TIMER(timer, nsa310_timerfunc, 0, 0); + +static struct mtd_partition nsa310_nand_parts[] = { + { + .name = "uboot", + .offset = 0, + .size = 0x100000, + .mask_flags = MTD_WRITEABLE + }, { + .name = "uboot_env", + .offset = MTDPART_OFS_NXTBLK, + .size = 0x80000 + }, { + .name = "key_store", + .offset = MTDPART_OFS_NXTBLK, + .size = 0x80000 + }, { + .name = "info", + .offset = MTDPART_OFS_NXTBLK, + .size = 0x80000 + }, { + .name = "etc", + .offset = MTDPART_OFS_NXTBLK, + .size = 0xA00000 + }, { + .name = "kernel_1", + .offset = MTDPART_OFS_NXTBLK, + .size = 0xA00000 + }, { + .name = "rootfs1", + .offset = MTDPART_OFS_NXTBLK, + .size = 0x2FC0000 + }, { + .name = "kernel_2", + .offset = MTDPART_OFS_NXTBLK, + .size = 0xA00000 + }, { + .name = "rootfs2", + .offset = MTDPART_OFS_NXTBLK, + .size = 0x2FC0000 + }, +}; + +static struct i2c_board_info __initdata nsa310_i2c_rtc = { + I2C_BOARD_INFO("pcf8563", 0x51), +}; + +static struct mv643xx_eth_platform_data nsa310_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, +}; + +static struct mv_sata_platform_data nsa310_sata_data = { + .n_ports = 2, +}; + +static unsigned int nsa310_mpp_config[] __initdata = { + MPP36_GPIO, // Reset button + MPP37_GPIO, // Copy button + MPP46_GPIO, // Power button + + MPP48_GPIO, // Power Off + MPP21_GPIO, // USB Power Off + + MPP28_GPIO, // Sys LED Green + MPP29_GPIO, // Sys LED Yellow + MPP41_GPIO, // SATA1 LED Green + MPP42_GPIO, // SATA1 LED Red + MPP12_GPO, // SATA2 LED Green + MPP13_GPIO, // SATA2 LED Red + MPP39_GPIO, // Copy LED Green + MPP40_GPIO, // Copy LED Red + MPP15_GPIO, // USB LED Green + + MPP14_GPIO, // MCU Data + MPP16_GPIO, // MCU Clk + MPP17_GPIO, // MCU Act + + MPP38_GPIO, // VID B0 + MPP45_GPIO, // VID B1 + + MPP44_GPIO, // Buzzer + MPP43_GPIO, // HTP + + MPP47_GPIO, // Power Resume Data + MPP49_GPIO, // Power Resume Clock + + 0 +}; + +static struct gpio_led nsa310_gpio_led[] = { + { + .name = "nsa310:green:System", + .default_trigger = "timer", + .gpio = 28, + .active_low = 0, + + }, + { + .name = "nsa310:red:System", + .default_trigger = "none", + .gpio = 29, + .active_low = 0, + }, + { + .name = "nsa310:green:SATA1", + .default_trigger = "none", + .gpio = 41, + .active_low = 0, + }, + { + .name = "nsa310:red:SATA1", + .default_trigger = "sata-disk", + .gpio = 42, + .active_low = 0, + }, + { + .name = "nsa310:green:SATA2", + .default_trigger = "none", + .gpio = 12, + .active_low = 0, + }, + { + .name = "nsa310:red:SATA2", + .default_trigger = "none", + .gpio = 13, + .active_low = 0, + }, + { + .name = "nsa310:green:USB", + .default_trigger = "none", + .gpio = 15, + .active_low = 0, + }, + { + .name = "nsa310:green:Copy", + .default_trigger = "none", + .gpio = 39, + .active_low = 0, + }, + { + .name = "nsa310:red:Copy", + .default_trigger = "none", + .gpio = 40, + .active_low = 0, + }, +}; + + +static int nsa310_gpio_blink_set(unsigned gpio, int state, + unsigned long *delay_on, unsigned long *delay_off) +{ + +// Use hardware acceleration +// if (delay_on && delay_off && !*delay_on && !*delay_off) +// *delay_on = *delay_off = 100; + + switch(state) { + case GPIO_LED_NO_BLINK_LOW: + case GPIO_LED_NO_BLINK_HIGH: + orion_gpio_set_blink(gpio, 0); + gpio_set_value(gpio, state); + break; + case GPIO_LED_BLINK: + orion_gpio_set_blink(gpio, 1); + break; + } + return 0; +} + + +static struct gpio_led_platform_data nsa310_led_data = { + .leds = nsa310_gpio_led, + .num_leds = ARRAY_SIZE(nsa310_gpio_led), + .gpio_blink_set = nsa310_gpio_blink_set, +}; + +static struct platform_device nsa310_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { .platform_data = &nsa310_led_data, } +}; + +static struct gpio_keys_button nsa310_gpio_keys_button[] = { + { + .code = KEY_POWER, + .type = EV_KEY, + .gpio = 46, + .desc = "Power Button", + .active_low = 0, + .debounce_interval = 1000, + }, + { + .code = KEY_COPY, + .type = EV_KEY, + .gpio = 37, + .desc = "USB Copy", + .active_low = 1, + .debounce_interval = 1000, + }, + { + .code = KEY_OPTION, + .type = EV_KEY, + .gpio = 36, + .desc = "Reset", + .active_low = 1, + .debounce_interval = 1000, + }, +}; + +static struct gpio_keys_platform_data nsa310_keys_data = { + .buttons = nsa310_gpio_keys_button, + .nbuttons = ARRAY_SIZE(nsa310_gpio_keys_button), +}; + + +static struct platform_device nsa310_buttons = { + .name = "gpio-keys", + .id = -1, + .dev = { .platform_data = &nsa310_keys_data, } +}; + +static void nsa310_power_off(void) +{ +// +//don't work with sysfs + printk(KERN_INFO "Activating power off GPIO pin...\n"); + gpio_set_value(48, 1); + +// If machine goes to restart, uncomment next lines for infinite loop +/* printk(KERN_INFO "System halted, please turn off power manually\n"); + gpio_set_value(28, 0); + do { + mdelay(1000); + } while(1); +*/ +} + +static void nsa310_timerfunc(unsigned long data) +{ +// Activate USB Power + if (gpio_request(21, "USB Power") != 0 || gpio_direction_output(21, 1) != 0) + printk(KERN_ERR "failed to setup USB power GPIO\n"); + else + printk(KERN_INFO "USB power enabled\n"); + gpio_free(21); +} + +static void __init nsa310_init(void) +{ + u32 dev, rev; + + kirkwood_init(); + + kirkwood_mpp_conf(nsa310_mpp_config); + kirkwood_nand_init(ARRAY_AND_SIZE(nsa310_nand_parts), 25); + kirkwood_ge00_init(&nsa310_ge00_data); + kirkwood_pcie_id(&dev, &rev); + + kirkwood_sata_init(&nsa310_sata_data); + kirkwood_uart0_init(); + kirkwood_i2c_init(); + i2c_register_board_info(0, &nsa310_i2c_rtc, 1); + + platform_device_register(&nsa310_leds); + platform_device_register(&nsa310_buttons); + + kirkwood_ehci_init(); +// USB Power delay for 20 sec + timer.function = nsa310_timerfunc; + timer.data = 0; + timer.expires = jiffies + msecs_to_jiffies(20000); + add_timer(&timer); + + +/* Power resume control */ + gpio_request(49, "Power-clk"); + gpio_direction_output(49, 1); + gpio_request(47, "Power-data"); +// Clear power resume +// gpio_direction_output(47, 0); +// Set power resume + gpio_direction_output(47, 1); + udelay(1000); +// gpio_direction_output(49, 0); + gpio_set_value(49, 0); +// release GPIO? +//test + gpio_free(47); + gpio_free(49); + printk(KERN_INFO "Power resume enabled\n"); + + +// Activate Power-off GPIO + if (gpio_request(48, "Power-off") == 0 && gpio_direction_output(48, 0) == 0) { +// gpio_free(48); + pm_power_off = nsa310_power_off; + printk(KERN_INFO "Power-off GPIO enabled\n"); + } else + printk(KERN_ERR "failed to configure Power-off GPIO\n"); + +}; + +static int __init nsa310_pci_init(void) +{ + if (machine_is_nsa310()) + kirkwood_pcie_init(KW_PCIE0); + return 0; +} + +subsys_initcall(nsa310_pci_init); + +MACHINE_START(NSA310, "Zyxel NSA-310") + .atag_offset = 0x100, + .init_machine = nsa310_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END diff -ruN a/arch/arm/mach-kirkwood/nsa320-setup.c b/arch/arm/mach-kirkwood/nsa320-setup.c --- a/arch/arm/mach-kirkwood/nsa320-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/nsa320-setup.c 2013-11-08 01:39:48.718009095 -0700 @@ -0,0 +1,305 @@ +/* + * arch/arm/mach-kirkwood/nsa320-setup.c + * + * ZyXEL NSA320 2-Bay Power Media Server Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition nsa320_nand_parts[] = { + { + .name = "uboot", + .offset = 0, + .size = SZ_1M, + .mask_flags = MTD_WRITEABLE + }, { + .name = "uboot_env", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_512K + }, { + .name = "key_store", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_512K + }, { + .name = "info", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_512K + }, { + .name = "etc", + .offset = MTDPART_OFS_NXTBLK, + .size = 10 * SZ_1M + }, { + .name = "kernel_1", + .offset = MTDPART_OFS_NXTBLK, + .size = 10 * SZ_1M + }, { + .name = "rootfs1", + .offset = MTDPART_OFS_NXTBLK, + .size = 48 * SZ_1M - SZ_256K + }, { + .name = "kernel_2", + .offset = MTDPART_OFS_NXTBLK, + .size = 10 * SZ_1M + }, { + .name = "rootfs2", + .offset = MTDPART_OFS_NXTBLK, + .size = 48 * SZ_1M - SZ_256K + }, +}; + +static struct i2c_board_info __initdata nsa320_i2c_rtc = { + I2C_BOARD_INFO("pcf8563", 0x51), +}; + +static struct mv643xx_eth_platform_data nsa320_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv_sata_platform_data nsa320_sata_data = { + .n_ports = 2, +}; + +static struct gpio_keys_button nsa320_button_pins[] = { + { + .code = KEY_RESTART, + .gpio = 36, + .desc = "Reset", + .active_low = 1, + .debounce_interval = 1000, + }, { + .code = KEY_COPY, + .gpio = 37, + .desc = "Copy", + .active_low = 1, + .debounce_interval = 1000, + }, { + .code = KEY_POWER, + .gpio = 46, + .desc = "Power", + .active_low = 0, + .debounce_interval = 1000, + }, +}; + +static struct gpio_keys_platform_data nsa320_button_data = { + .buttons = nsa320_button_pins, + .nbuttons = ARRAY_SIZE(nsa320_button_pins), +}; + +static struct platform_device nsa320_buttons = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &nsa320_button_data, + }, +}; + +static struct gpio_led nsa320_led_pins[] = { + { + .name = "nsa320:green:hdd2", + .default_trigger = "ide-disk", + .gpio = 12, + .active_low = 0, + }, { + .name = "nsa320:red:hdd2", + .default_trigger = "default-off", + .gpio = 13, + .active_low = 0, + }, { + .name = "nsa320:green:usb", + .default_trigger = "default-off", + .gpio = 15, + .active_low = 0, + }, { + .name = "nsa320:green:sys", + .default_trigger = "default-off", + .gpio = 28, + .active_low = 0, + }, { + .name = "nsa320:orange:sys", + .default_trigger = "default-on", + .gpio = 29, + .active_low = 0, + }, { + .name = "nsa320:green:copy", + .default_trigger = "default-off", + .gpio = 39, + .active_low = 0, + }, { + .name = "nsa320:red:copy", + .default_trigger = "default-off", + .gpio = 40, + .active_low = 0, + }, { + .name = "nsa320:green:hdd1", + .default_trigger = "ide-disk", + .gpio = 41, + .active_low = 0, + }, { + .name = "nsa320:red:hdd1", + .default_trigger = "default-off", + .gpio = 42, + .active_low = 0, + }, +}; + +static int nsa320_gpio_blink_set(unsigned gpio, int state, + unsigned long *delay_on, unsigned long *delay_off) +{ + switch(state) { + case GPIO_LED_NO_BLINK_LOW: + case GPIO_LED_NO_BLINK_HIGH: + orion_gpio_set_blink(gpio, 0); + gpio_set_value(gpio, state); + break; + case GPIO_LED_BLINK: + orion_gpio_set_blink(gpio, 1); + break; + } + return 0; +} + +static struct gpio_led_platform_data nsa320_led_data = { + .leds = nsa320_led_pins, + .num_leds = ARRAY_SIZE(nsa320_led_pins), + .gpio_blink_set = nsa320_gpio_blink_set, +}; + +static struct platform_device nsa320_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &nsa320_led_data, + }, +}; + +static struct nsa3xx_hwmon_platform_data nsa320_hwmon_data = { + /* GPIOs connected to Holtek HT46R065 MCU */ + .act_pin = 17, + .clk_pin = 16, + .data_pin = 14, +}; + +static struct platform_device nsa320_hwmon = { + .name = "nsa3xx-hwmon", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &nsa320_hwmon_data, + }, +}; + +static unsigned int nsa320_mpp_config[] __initdata = { + MPP8_TW0_SDA, /* PCF8563 RTC chip */ + MPP9_TW0_SCK, /* connected to TWSI */ + MPP12_GPO, /* HDD2 LED (green) */ + MPP13_GPIO, /* HDD2 LED (red) */ + MPP14_GPIO, /* MCU DATA pin (in) */ + MPP15_GPIO, /* USB LED (green) */ + MPP16_GPIO, /* MCU CLK pin (out) */ + MPP17_GPIO, /* MCU ACT pin (out) */ + MPP21_GPIO, /* USB power */ + MPP28_GPIO, /* SYS LED (green) */ + MPP29_GPIO, /* SYS LED (orange) */ + MPP36_GPIO, /* reset button */ + MPP37_GPIO, /* copy button */ + MPP38_GPIO, /* VID B0 */ + MPP39_GPIO, /* COPY LED (green) */ + MPP40_GPIO, /* COPY LED (red) */ + MPP41_GPIO, /* HDD1 LED (green) */ + MPP42_GPIO, /* HDD1 LED (red) */ + MPP43_GPIO, /* HTP pin */ + MPP44_GPIO, /* buzzer */ + MPP45_GPIO, /* VID B1 */ + MPP46_GPIO, /* power button */ + MPP47_GPIO, /* power resume data */ + MPP48_GPIO, /* power off */ + MPP49_GPIO, /* power resume clock */ + 0 +}; + +#define NSA320_GPIO_USB_POWER 21 +#define NSA320_GPIO_POWER_OFF 48 + +static void nsa320_power_off(void) +{ + gpio_set_value(NSA320_GPIO_POWER_OFF, 1); +} + +static int __initdata usb_power = 1; /* default "on" */ + +static int __init nsa320_usb_power(char *str) +{ + usb_power = strncmp(str, "off", 3) ? 1 : 0; + return 1; +} +/* Parse boot_command_line string nsa320_usb_power=on|off */ +__setup("nsa320_usb_power=", nsa320_usb_power); + +static void __init nsa320_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + + kirkwood_mpp_conf(nsa320_mpp_config); + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(nsa320_nand_parts), 40); + kirkwood_ge00_init(&nsa320_ge00_data); + kirkwood_sata_init(&nsa320_sata_data); + + platform_device_register(&nsa320_leds); + platform_device_register(&nsa320_buttons); + platform_device_register(&nsa320_hwmon); + + kirkwood_i2c_init(); + i2c_register_board_info(0, &nsa320_i2c_rtc, 1); + + if (gpio_request(NSA320_GPIO_USB_POWER, "USB Power Enable") || + gpio_direction_output(NSA320_GPIO_USB_POWER, usb_power)) + pr_err("nsa320: failed to configure USB power enable GPIO\n"); + gpio_free(NSA320_GPIO_USB_POWER); + + kirkwood_ehci_init(); + + if (gpio_request(NSA320_GPIO_POWER_OFF, "power-off") || + gpio_direction_output(NSA320_GPIO_POWER_OFF, 0)) + pr_err("nsa320: failed to configure power-off GPIO\n"); + else + pm_power_off = nsa320_power_off; +} + +MACHINE_START(NSA320, "ZyXEL NSA320 2-Bay Power Media Server") + /* Maintainer: Peter Schildmann */ + .atag_offset = 0x100, + .init_machine = nsa320_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END diff -ruN a/arch/arm/mach-kirkwood/nsa325-setup.c b/arch/arm/mach-kirkwood/nsa325-setup.c --- a/arch/arm/mach-kirkwood/nsa325-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/nsa325-setup.c 2013-11-08 01:39:48.718009095 -0700 @@ -0,0 +1,359 @@ +/* + * arch/arm/mach-kirkwood/nsa325-setup.c + * + * ZyXEL NSA325 2-Bay Power Media Server Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition nsa325_nand_parts[] = { + { + .name = "uboot", + .offset = 0, + .size = SZ_1M, + .mask_flags = MTD_WRITEABLE + }, { + .name = "uboot_env", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_512K + }, { + .name = "key_store", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_512K + }, { + .name = "info", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_512K + }, { + .name = "etc", + .offset = MTDPART_OFS_NXTBLK, + .size = 10 * SZ_1M + }, { + .name = "kernel_1", + .offset = MTDPART_OFS_NXTBLK, + .size = 10 * SZ_1M + }, { + .name = "rootfs1", + .offset = MTDPART_OFS_NXTBLK, + .size = 48 * SZ_1M - SZ_256K + }, { + .name = "kernel_2", + .offset = MTDPART_OFS_NXTBLK, + .size = 10 * SZ_1M + }, { + .name = "rootfs2", + .offset = MTDPART_OFS_NXTBLK, + .size = 48 * SZ_1M - SZ_256K + }, +}; + +static struct i2c_board_info __initdata nsa325_i2c_rtc = { + I2C_BOARD_INFO("pcf8563", 0x51), +}; + +static struct mv643xx_eth_platform_data nsa325_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv_sata_platform_data nsa325_sata_data = { + .n_ports = 2, +}; + +static struct gpio_keys_button nsa325_button_pins[] = { + { + .code = KEY_RESTART, + .gpio = 36, + .desc = "Reset", + .active_low = 1, + .debounce_interval = 1000, + }, { + .code = KEY_COPY, + .gpio = 37, + .desc = "Copy", + .active_low = 1, + .debounce_interval = 1000, + }, { + .code = KEY_POWER, + .gpio = 46, + .desc = "Power", + .active_low = 0, + .debounce_interval = 1000, + }, +}; + +static struct gpio_keys_platform_data nsa325_button_data = { + .buttons = nsa325_button_pins, + .nbuttons = ARRAY_SIZE(nsa325_button_pins), +}; + +static struct platform_device nsa325_buttons = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &nsa325_button_data, + }, +}; + +static struct gpio_led nsa325_led_pins[] = { + { + .name = "nsa325:green:hdd2", + .default_trigger = "ide-disk", + .gpio = 12, + .active_low = 0, + }, { + .name = "nsa325:red:hdd2", + .default_trigger = "default-off", + .gpio = 13, + .active_low = 0, + }, { + .name = "nsa325:green:usb", + .default_trigger = "default-off", + .gpio = 15, + .active_low = 0, + }, { + .name = "nsa325:green:sys", + .default_trigger = "default-off", + .gpio = 28, + .active_low = 0, + }, { + .name = "nsa325:orange:sys", + .default_trigger = "default-on", + .gpio = 29, + .active_low = 0, + }, { + .name = "nsa325:green:copy", + .default_trigger = "default-off", + .gpio = 39, + .active_low = 0, + }, { + .name = "nsa325:red:copy", + .default_trigger = "default-off", + .gpio = 40, + .active_low = 0, + }, { + .name = "nsa325:green:hdd1", + .default_trigger = "ide-disk", + .gpio = 41, + .active_low = 0, + }, { + .name = "nsa325:red:hdd1", + .default_trigger = "default-off", + .gpio = 42, + .active_low = 0, + }, +}; + +static int nsa325_gpio_blink_set(unsigned gpio, int state, + unsigned long *delay_on, unsigned long *delay_off) +{ + switch(state) { + case GPIO_LED_NO_BLINK_LOW: + case GPIO_LED_NO_BLINK_HIGH: + orion_gpio_set_blink(gpio, 0); + gpio_set_value(gpio, state); + break; + case GPIO_LED_BLINK: + orion_gpio_set_blink(gpio, 1); + break; + } + return 0; +} + +static struct gpio_led_platform_data nsa325_led_data = { + .leds = nsa325_led_pins, + .num_leds = ARRAY_SIZE(nsa325_led_pins), + .gpio_blink_set = nsa325_gpio_blink_set, +}; + +static struct platform_device nsa325_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &nsa325_led_data, + }, +}; + +static struct nsa3xx_hwmon_platform_data nsa325_hwmon_data = { + /* GPIOs connected to Holtek HT46R065 MCU */ + .act_pin = 17, + .clk_pin = 16, + .data_pin = 14, +}; + +static struct platform_device nsa325_hwmon = { + .name = "nsa3xx-hwmon", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &nsa325_hwmon_data, + }, +}; + +static unsigned int nsa325_mpp_config[] __initdata = { + MPP8_TW0_SDA, /* PCF8563 RTC chip */ + MPP9_TW0_SCK, /* connected to TWSI */ + MPP12_GPO, /* HDD2 LED (green) */ + MPP13_GPIO, /* ? HDD2 LED (red) ? */ + MPP14_GPIO, /* MCU DATA pin (in) */ + MPP15_GPIO, /* USB LED (green) */ + MPP16_GPIO, /* MCU CLK pin (out) */ + MPP17_GPIO, /* MCU ACT pin (out) */ + MPP21_GPIO, /* USB power */ + MPP28_GPIO, /* SYS LED (green) */ + MPP29_GPIO, /* SYS LED (orange) */ + MPP36_GPIO, /* reset button */ + MPP37_GPIO, /* copy button */ + MPP38_GPIO, /* VID B0 */ + MPP39_GPIO, /* COPY LED (green) */ + MPP40_GPIO, /* COPY LED (red) */ + MPP41_GPIO, /* HDD1 LED (green) */ + MPP42_GPIO, /* HDD1 LED (red) */ + MPP43_GPIO, /* HTP pin */ + MPP44_GPIO, /* buzzer */ + MPP45_GPIO, /* VID B1 */ + MPP46_GPIO, /* power button */ + MPP47_GPIO, /* HDD2 power */ + MPP48_GPIO, /* power off */ + 0 +}; + +#define NSA325_GPIO_WATCHDOG 14 +#define NSA325_GPIO_USB_POWER 21 +#define NSA325_GPIO_HDD2_POWER 47 +#define NSA325_GPIO_POWER_OFF 48 + +static void nsa325_power_off(void) +{ + gpio_set_value(NSA325_GPIO_POWER_OFF, 1); +} + +static int __initdata usb_power = 1; /* default "on" */ + +static int __init nsa325_usb_power(char *str) +{ + usb_power = strncmp(str, "off", 3) ? 1 : 0; + return 1; +} +/* Parse boot_command_line string nsa325_usb_power=on|off */ +__setup("nsa325_usb_power=", nsa325_usb_power); + +/* the nsa325 uses the 88E1310S Alaska, and has an MCU attached to the LED[2] via tristate interrupt */ +static int nsa325_phy_fixup(struct phy_device *phydev) +{ + int err; + int temp; + /* go to page 3 */ + err = phy_write(phydev, 22, 3); + if (err < 0) + return err; + /* read page 3, register 17 */ + temp = phy_read(phydev, 17); + /* clear bit 4, set bit 5 */ + temp &= ~(1<<4); + temp |= (1<<5); + /* write page 3, register 17 */ + err = phy_write(phydev, 17, temp); + if (err < 0) + return err; + /* go to page 0 */ + err = phy_write(phydev, 22, 0); + if (err < 0) + return err; + + return 0; +} + +static void __init nsa325_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + + kirkwood_mpp_conf(nsa325_mpp_config); + + /* setup the phy fixup */ + phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1318S,MARVELL_PHY_ID_MASK,nsa325_phy_fixup); + kirkwood_ge00_init(&nsa325_ge00_data); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(nsa325_nand_parts), 40); + + /* turn off the watchdog */ + gpio_set_value(NSA325_GPIO_WATCHDOG, 1); + + /* turn on the second drive bay */ + if (gpio_request(NSA325_GPIO_HDD2_POWER, "HDD2 Power Enable") || + gpio_direction_output(NSA325_GPIO_HDD2_POWER,1)) + pr_err("nsa325: failed to configure HDD2 power enable GPIO\n"); + gpio_free(NSA325_GPIO_HDD2_POWER); + + kirkwood_sata_init(&nsa325_sata_data); + + platform_device_register(&nsa325_leds); + platform_device_register(&nsa325_buttons); + platform_device_register(&nsa325_hwmon); + + kirkwood_i2c_init(); + i2c_register_board_info(0, &nsa325_i2c_rtc, 1); + + if (gpio_request(NSA325_GPIO_USB_POWER, "USB Power Enable") || + gpio_direction_output(NSA325_GPIO_USB_POWER, usb_power)) + pr_err("nsa325: failed to configure USB power enable GPIO\n"); + gpio_free(NSA325_GPIO_USB_POWER); + + kirkwood_ehci_init(); + + if (gpio_request(NSA325_GPIO_POWER_OFF, "power-off") || + gpio_direction_output(NSA325_GPIO_POWER_OFF, 0)) + pr_err("nsa325: failed to configure power-off GPIO\n"); + else + pm_power_off = nsa325_power_off; +} + +static int __init nsa325_pci_init(void) +{ + if (machine_is_nsa325()) + kirkwood_pcie_init(KW_PCIE0); + + return 0; +} +subsys_initcall(nsa325_pci_init); + +MACHINE_START(NSA325, "ZyXEL NSA325 2-Bay Power Media Server") + /* Maintainer: Jason Plum */ + .atag_offset = 0x100, + .init_machine = nsa325_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END diff -ruN a/arch/arm/mach-kirkwood/pogo_e02-setup.c b/arch/arm/mach-kirkwood/pogo_e02-setup.c --- a/arch/arm/mach-kirkwood/pogo_e02-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/pogo_e02-setup.c 2013-11-08 01:39:48.718009095 -0700 @@ -0,0 +1,115 @@ +/* + * arch/arm/mach-kirkwood/pogo_e02-setup.c + * + * CloudEngines Pogoplug E02 support + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition pogo_e02_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "pogoplug", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_32M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data pogo_e02_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct gpio_led pogo_e02_led_pins[] = { + { + .name = "status:green:health", + .default_trigger = "default-on", + .gpio = 48, + .active_low = 1, + }, + { + .name = "status:orange:fault", + .default_trigger = "none", + .gpio = 49, + .active_low = 1, + } +}; + +static struct gpio_led_platform_data pogo_e02_led_data = { + .leds = pogo_e02_led_pins, + .num_leds = ARRAY_SIZE(pogo_e02_led_pins), +}; + +static struct platform_device pogo_e02_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &pogo_e02_led_data, + } +}; + +static unsigned int pogo_e02_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP48_GPIO, /* LED Green */ + MPP49_GPIO, /* LED Orange */ + 0 +}; + +static void __init pogo_e02_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + + /* setup gpio pin select */ + kirkwood_mpp_conf(pogo_e02_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(pogo_e02_nand_parts), 25); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + + kirkwood_ge00_init(&pogo_e02_ge00_data); + + platform_device_register(&pogo_e02_leds); +} + +MACHINE_START(POGO_E02, "Pogoplug E02") + .atag_offset = 0x100, + .init_machine = pogo_e02_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END diff -ruN a/arch/arm/mach-kirkwood/pogoplugv4-setup.c b/arch/arm/mach-kirkwood/pogoplugv4-setup.c --- a/arch/arm/mach-kirkwood/pogoplugv4-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/pogoplugv4-setup.c 2013-11-08 01:39:48.718009095 -0700 @@ -0,0 +1,195 @@ +/* + * arch/arm/mach-kirkwood/pogoplugv4-setup.c + * + * Pogoplug Series 4 Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +#define POGOPLUGV4_GPIO_USB_VBUS 10 + +static struct mtd_partition ppv4_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = 2 * SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = 3 * SZ_1M + }, { + .name = "uImage2", + .offset = MTDPART_OFS_NXTBLK, + .size = 3 * SZ_1M + }, { + .name = "failsafe", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_8M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data pogoplugv4_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv_sata_platform_data pogoplugv4_sata_data = { + .n_ports = 1, +}; + +static struct gpio_keys_button pogoplugv4_button_pins[] = { + { + .code = KEY_EJECTCD, + .gpio = 29, + .desc = "Eject Button", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data pogoplugv4_button_data = { + .buttons = pogoplugv4_button_pins, + .nbuttons = ARRAY_SIZE(pogoplugv4_button_pins), +}; + +static struct platform_device pogoplugv4_buttons = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &pogoplugv4_button_data, + }, +}; + +static struct gpio_led pogoplugv4_led_pins[] = { + { + .name = "status:green:health", + .default_trigger = "default-on", + .gpio = 22, + .active_low = 1, + }, + { + .name = "status:red:fault", + .default_trigger = "none", + .gpio = 24, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data pogoplugv4_led_data = { + .leds = pogoplugv4_led_pins, + .num_leds = ARRAY_SIZE(pogoplugv4_led_pins), +}; + +static struct platform_device pogoplugv4_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &pogoplugv4_led_data, + } +}; + +static struct mvsdio_platform_data ppv4_mvsdio_data = { + .gpio_card_detect = 27, +}; + +static unsigned int ppv4_mpp_config[] __initdata = { + MPP27_GPIO, /* SD card detect */ + MPP29_GPIO, /* Eject button */ + MPP22_GPIO, /* Green LED */ + MPP24_GPIO, /* Red LED */ + MPP12_SD_CLK, + MPP13_SD_CMD, + MPP14_SD_D0, + MPP15_SD_D1, + MPP16_SD_D2, + MPP17_SD_D3, + 0 +}; + +static const struct flash_platform_data pogoplugv4_spi_slave_data = { + .type = "m25p05-nonjedec", +}; + +static struct spi_board_info __initdata pogoplugv4_spi_slave_info[] = { + { + .modalias = "m25p05-nonjedec", + .platform_data = &pogoplugv4_spi_slave_data, + .irq = -1, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static void __init pogoplugv4_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(ppv4_mpp_config); + + orion_gpio_set_valid(POGOPLUGV4_GPIO_USB_VBUS, 1); + if (gpio_request(POGOPLUGV4_GPIO_USB_VBUS, "USB VBUS") != 0 || + gpio_direction_output(POGOPLUGV4_GPIO_USB_VBUS, 1) != 0) + pr_err("POGOPLUGV4: failed to setup USB VBUS GPIO\n"); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&pogoplugv4_ge00_data); + kirkwood_sata_init(&pogoplugv4_sata_data); + spi_register_board_info(pogoplugv4_spi_slave_info, + ARRAY_SIZE(pogoplugv4_spi_slave_info)); + kirkwood_spi_init(); + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(ppv4_nand_parts), 25); + kirkwood_sdio_init(&ppv4_mvsdio_data); + platform_device_register(&pogoplugv4_leds); + platform_device_register(&pogoplugv4_buttons); +} + +static int __init pogoplugv4_pci_init(void) +{ + if (machine_is_pogoplugv4()) + kirkwood_pcie_init(KW_PCIE0); + + return 0; +} +subsys_initcall(pogoplugv4_pci_init); + +MACHINE_START(POGOPLUGV4, "Pogoplug V4") + /* Maintainer: Kevin Mihelich */ + .atag_offset = 0x100, + .init_machine = pogoplugv4_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END diff -ruN a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c 2013-11-08 01:39:48.728009483 -0700 @@ -0,0 +1,170 @@ +/* + * arch/arm/mach-kirkwood/sheevaplug-setup.c + * + * Marvell SheevaPlug Reference Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition sheevaplug_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data sheevaplug_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv_sata_platform_data esata_sheevaplug_sata_data = { + .n_ports = 2, +}; + +static struct mvsdio_platform_data sheevaplug_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +static struct mvsdio_platform_data esata_sheevaplug_mvsdio_data = { + .gpio_write_protect = -1, /* (disable - does not work on 3.9+) MPP44 used as SD write protect */ + .gpio_card_detect = 47, /* MPP47 used as SD card detect */ +}; + +static struct gpio_led sheevaplug_led_pins[] = { + { + .name = "plug:red:misc", + .default_trigger = "none", + .gpio = 46, + .active_low = 1, + }, + { + .name = "status:green:health", + .default_trigger = "none", + .gpio = 48, + .active_low = 1, + }, + { + .name = "status:blue:health", + .default_trigger = "default-on", + .gpio = 49, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data sheevaplug_led_data = { + .leds = sheevaplug_led_pins, + .num_leds = ARRAY_SIZE(sheevaplug_led_pins), +}; + +static struct platform_device sheevaplug_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &sheevaplug_led_data, + } +}; + +static unsigned int sheevaplug_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP46_GPIO, /* LED Red */ + MPP48_GPIO, /* LED Green */ + MPP49_GPIO, /* LED Blue */ + 0 +}; + +static unsigned int esata_sheevaplug_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + //MPP44_GPIO, /* SD Write Protect */ + MPP47_GPIO, /* SD Card Detect */ + MPP46_GPIO, /* LED Red */ + MPP48_GPIO, /* LED Green */ + MPP49_GPIO, /* LED Blue */ + 0 +}; + +static void __init sheevaplug_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + + /* setup gpio pin select */ + if (machine_is_esata_sheevaplug()) + kirkwood_mpp_conf(esata_sheevaplug_mpp_config); + else + kirkwood_mpp_conf(sheevaplug_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + pr_err("can't set up GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + + kirkwood_ge00_init(&sheevaplug_ge00_data); + + /* honor lower power consumption for plugs with out eSATA */ + if (machine_is_esata_sheevaplug()) + kirkwood_sata_init(&esata_sheevaplug_sata_data); + + /* enable sd wp and sd cd on plugs with esata */ + if (machine_is_esata_sheevaplug()) + kirkwood_sdio_init(&esata_sheevaplug_mvsdio_data); + else + kirkwood_sdio_init(&sheevaplug_mvsdio_data); + + platform_device_register(&sheevaplug_leds); +} + +#ifdef CONFIG_MACH_SHEEVAPLUG +MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board") + /* Maintainer: shadi Ammouri */ + .atag_offset = 0x100, + .init_machine = sheevaplug_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG +MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board") + .atag_offset = 0x100, + .init_machine = sheevaplug_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END +#endif diff -ruN a/arch/arm/mach-kirkwood/topkick-setup.c b/arch/arm/mach-kirkwood/topkick-setup.c --- a/arch/arm/mach-kirkwood/topkick-setup.c 1969-12-31 17:00:00.000000000 -0700 +++ b/arch/arm/mach-kirkwood/topkick-setup.c 2013-11-08 01:39:48.728009483 -0700 @@ -0,0 +1,165 @@ +/* + * arch/arm/mach-kirkwood/topkick-setup.c + * + * USI Topkick Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition topkick_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x180000 + }, { + .name = "u-boot-env", + .offset = 0x180000, + .size = 128 * 1024 + }, { + .name = "uImage", + .offset = 2 * 1024 * 1024, + .size = 6 * 1024 * 1024 + }, { + .name = "rootfs", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data topkick_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv_sata_platform_data topkick_sata_data = { + .n_ports = 1, +}; + +static struct mvsdio_platform_data topkick_mvsdio_data = { + .gpio_card_detect = 47, /* MPP47 used as SD card detect */ +}; + + +static struct gpio_led topkick_led_pins[] = { + { + .name = "status:blue:disk", + .default_trigger = "none", + .gpio = 21, + .active_low = 1, + }, + { + .name = "status:red:fault", + .default_trigger = "none", + .gpio = 37, + .active_low = 1, + }, + { + .name = "status:blue:health", + .default_trigger = "default-on", + .gpio = 38, + .active_low = 1, + }, + { + .name = "status:green:misc", + .default_trigger = "none", + .gpio = 39, + .active_low = 1, + }, + { + .name = "status:orange:misc", + .default_trigger = "none", + .gpio = 48, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data topkick_led_data = { + .leds = topkick_led_pins, + .num_leds = ARRAY_SIZE(topkick_led_pins), +}; + +static struct platform_device topkick_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &topkick_led_data, + } +}; + +static unsigned int topkick_mpp_config[] __initdata = { + MPP12_SD_CLK, /* SDIO Clock */ + MPP13_SD_CMD, /* SDIO Cmd */ + MPP14_SD_D0, /* SDIO Data 0 */ + MPP15_SD_D1, /* SDIO Data 1 */ + MPP16_SD_D2, /* SDIO Data 2 */ + MPP17_SD_D3, /* SDIO Data 3 */ + MPP21_GPIO, /* LED Blue SATA */ + MPP35_GPIO, /* USB Power Enable */ + MPP36_GPIO, /* SATA Power Enable */ + MPP37_GPIO, /* LED Red System */ + MPP38_GPIO, /* LED Blue System */ + MPP39_GPIO, /* LED Green Misc/WiFi */ + MPP43_GPIO, /* WOL Eth WOL */ + MPP44_GPIO, /* SW GW Mode */ + MPP45_GPIO, /* SW AP Mode */ + MPP46_GPIO, /* SW Power Off */ + MPP47_GPIO, /* SDIO Detect */ + MPP48_GPIO, /* LED Orange Misc/WiFi */ + 0 +}; + +static void __init topkick_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + + /* setup gpio pin select */ + kirkwood_mpp_conf(topkick_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(topkick_nand_parts), 40); + + if (gpio_request(35, "USB Power Enable") != 0 || + gpio_direction_output(35, 1) != 0) + printk(KERN_ERR "can't set up GPIO 35 (USB Power Enable)\n"); + if (gpio_request(36, "SATA Power Enable") != 0 || + gpio_direction_output(36, 1) != 0) + printk(KERN_ERR "can't set up GPIO 36 (SATA Power Enable)\n"); + kirkwood_ge00_init(&topkick_ge00_data); + kirkwood_ehci_init(); + kirkwood_sata_init(&topkick_sata_data); + kirkwood_sdio_init(&topkick_mvsdio_data); + + platform_device_register(&topkick_leds); +} + +MACHINE_START(TOPKICK, "USI Topkick") + /* Maintainer: Mike Brown */ + .atag_offset = 0x100, + .init_machine = topkick_init, + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .init_time = kirkwood_timer_init, + .restart = kirkwood_restart, +MACHINE_END diff -ruN a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c --- a/drivers/ata/sata_mv.c 2013-11-03 16:41:51.000000000 -0700 +++ b/drivers/ata/sata_mv.c 2013-11-08 01:39:48.868014917 -0700 @@ -71,6 +71,7 @@ #include #include #include +#include #define DRV_NAME "sata_mv" #define DRV_VERSION "1.28" @@ -1161,6 +1162,8 @@ { int want_ncq = (protocol == ATA_PROT_NCQ); + ledtrig_ide_activity(); + if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) { int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0); if (want_ncq != using_ncq) diff -ruN a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig --- a/drivers/hwmon/Kconfig 2013-11-03 16:41:51.000000000 -0700 +++ b/drivers/hwmon/Kconfig 2013-11-08 01:39:48.928017246 -0700 @@ -1553,6 +1553,19 @@ help Support for the A/D converter on MC13783 and MC13892 PMIC. +config SENSORS_NSA3XX + tristate "ZyXEL NSA3xx fan speed and temperature sensors" + depends on (MACH_NSA310 || MACH_NSA320) && GENERIC_GPIO + help + If you say yes here you get support for hardware monitoring + for the ZyXEL NSA3XX Media Servers. + + The sensor data is taken from a Holtek HT46R065 microcontroller + connected to GPIO lines. + + This driver can also be built as a module. If so, the module + will be called nsa3xx-hwmon. + if ACPI comment "ACPI drivers" diff -ruN a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile --- a/drivers/hwmon/Makefile 2013-11-03 16:41:51.000000000 -0700 +++ b/drivers/hwmon/Makefile 2013-11-08 01:39:48.928017246 -0700 @@ -109,6 +109,7 @@ obj-$(CONFIG_SENSORS_MAX6650) += max6650.o obj-$(CONFIG_SENSORS_MAX6697) += max6697.o obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o +obj-$(CONFIG_SENSORS_NSA3XX) += nsa3xx-hwmon.o obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o diff -ruN a/drivers/hwmon/nsa3xx-hwmon.c b/drivers/hwmon/nsa3xx-hwmon.c --- a/drivers/hwmon/nsa3xx-hwmon.c 1969-12-31 17:00:00.000000000 -0700 +++ b/drivers/hwmon/nsa3xx-hwmon.c 2013-11-08 01:39:48.928017246 -0700 @@ -0,0 +1,251 @@ +/* + * drivers/hwmon/nsa3xx-hwmon.c + * + * ZyXEL NSA3xx Media Servers + * hardware monitoring + * + * Copyright (C) 2012 Peter Schildmann + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAGIC_NUMBER 0x55 + +struct nsa3xx_hwmon { + struct platform_device *pdev; + struct device *classdev; + struct mutex update_lock; /* lock GPIO operations */ + unsigned long last_updated; /* jiffies */ + unsigned long mcu_data; +}; + +enum nsa3xx_inputs { + NSA3XX_FAN = 1, + NSA3XX_TEMP = 0, +}; + +static const char *nsa3xx_input_names[] = { + [NSA3XX_FAN] = "Chassis Fan", + [NSA3XX_TEMP] = "System Temperature", +}; + +static unsigned long nsa3xx_hwmon_update(struct device *dev) +{ + int i; + unsigned long mcu_data; + struct nsa3xx_hwmon *hwmon = dev_get_drvdata(dev); + struct nsa3xx_hwmon_platform_data *pdata = hwmon->pdev->dev.platform_data; + + mutex_lock(&hwmon->update_lock); + + mcu_data = hwmon->mcu_data; + + if (time_after(jiffies, hwmon->last_updated + (3 * HZ)) || mcu_data == 0) { + dev_dbg(dev, "Reading MCU data\n"); + + gpio_set_value(pdata->act_pin, 0); + msleep(100); + + for (i = 31; i >= 0; i--) { + gpio_set_value(pdata->clk_pin, 0); + udelay(100); + + gpio_set_value(pdata->clk_pin, 1); + udelay(100); + + mcu_data |= gpio_get_value(pdata->data_pin) ? (1 << i) : 0; + } + + gpio_set_value(pdata->act_pin, 1); + + if ((mcu_data & 0xff000000) != (MAGIC_NUMBER << 24)) { + dev_err(dev, "Failed to read MCU data\n"); + mcu_data = 0; + } + + hwmon->mcu_data = mcu_data; + hwmon->last_updated = jiffies; + } + + mutex_unlock(&hwmon->update_lock); + + return mcu_data; +} + +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "nsa3xx\n"); +} + +static ssize_t show_label(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int channel = to_sensor_dev_attr(attr)->index; + return sprintf(buf, "%s\n", nsa3xx_input_names[channel]); +} + +static ssize_t show_value(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int channel = to_sensor_dev_attr(attr)->index; + unsigned long mcu_data = nsa3xx_hwmon_update(dev); + unsigned long value = 0; + switch(channel) { + case NSA3XX_TEMP: + value = (mcu_data & 0xffff) * 100; + break; + case NSA3XX_FAN: + value = ((mcu_data & 0xff0000) >> 16) * 100; + break; + } + return sprintf(buf, "%lu\n", value); +} + +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL, NSA3XX_TEMP); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_value, NULL, NSA3XX_TEMP); +static SENSOR_DEVICE_ATTR(fan1_label, S_IRUGO, show_label, NULL, NSA3XX_FAN); +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_value, NULL, NSA3XX_FAN); + +static struct attribute *nsa3xx_attributes[] = { + &dev_attr_name.attr, + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_fan1_label.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + NULL +}; + +static const struct attribute_group nsa3xx_attr_group = { + .attrs = nsa3xx_attributes, +}; + +static int nsa3xx_hwmon_request_gpios(struct nsa3xx_hwmon_platform_data *pdata) +{ + int ret; + + if ((ret = gpio_request(pdata->act_pin, "act pin"))) + return ret; + + if ((ret = gpio_request(pdata->clk_pin, "clk pin"))) + return ret; + + if ((ret = gpio_request(pdata->data_pin, "data pin"))) + return ret; + + if ((ret = gpio_direction_output(pdata->act_pin, 1))) + return ret; + + if ((ret = gpio_direction_output(pdata->clk_pin, 1))) + return ret; + + if ((ret = gpio_direction_input(pdata->data_pin))) + return ret; + + return 0; +} + +static void nsa3xx_hwmon_free_gpios(struct nsa3xx_hwmon_platform_data *pdata) +{ + gpio_free(pdata->act_pin); + gpio_free(pdata->clk_pin); + gpio_free(pdata->data_pin); +} + +static int nsa3xx_hwmon_probe(struct platform_device *pdev) +{ + int ret; + struct nsa3xx_hwmon *hwmon; + struct nsa3xx_hwmon_platform_data *pdata = pdev->dev.platform_data; + + hwmon = kzalloc(sizeof(struct nsa3xx_hwmon), GFP_KERNEL); + if (!hwmon) + return -ENOMEM; + + platform_set_drvdata(pdev, hwmon); + hwmon->pdev = pdev; + hwmon->mcu_data = 0; + mutex_init(&hwmon->update_lock); + + ret = sysfs_create_group(&pdev->dev.kobj, &nsa3xx_attr_group); + if (ret) + goto err; + + hwmon->classdev = hwmon_device_register(&pdev->dev); + if (IS_ERR(hwmon->classdev)) { + ret = PTR_ERR(hwmon->classdev); + goto err_sysfs; + } + + ret = nsa3xx_hwmon_request_gpios(pdata); + if (ret) + goto err_free_gpio; + + dev_info(&pdev->dev, "initialized\n"); + + return 0; + +err_free_gpio: + nsa3xx_hwmon_free_gpios(pdata); + hwmon_device_unregister(hwmon->classdev); +err_sysfs: + sysfs_remove_group(&pdev->dev.kobj, &nsa3xx_attr_group); +err: + platform_set_drvdata(pdev, NULL); + kfree(hwmon); + return ret; +} + +static int nsa3xx_hwmon_remove(struct platform_device *pdev) +{ + struct nsa3xx_hwmon *hwmon = platform_get_drvdata(pdev); + + nsa3xx_hwmon_free_gpios(pdev->dev.platform_data); + hwmon_device_unregister(hwmon->classdev); + sysfs_remove_group(&pdev->dev.kobj, &nsa3xx_attr_group); + platform_set_drvdata(pdev, NULL); + kfree(hwmon); + + return 0; +} + +static struct platform_driver nsa3xx_hwmon_driver = { + .probe = nsa3xx_hwmon_probe, + .remove = nsa3xx_hwmon_remove, + .driver = { + .name = "nsa3xx-hwmon", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(nsa3xx_hwmon_driver); + +MODULE_AUTHOR("Peter Schildmann "); +MODULE_DESCRIPTION("NSA3XX Hardware Monitoring"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:nsa3xx-hwmon"); diff -ruN a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig --- a/drivers/leds/trigger/Kconfig 2013-11-03 16:41:51.000000000 -0700 +++ b/drivers/leds/trigger/Kconfig 2013-11-08 01:39:48.958018410 -0700 @@ -35,7 +35,6 @@ config LEDS_TRIGGER_IDE_DISK bool "LED IDE Disk Trigger" - depends on IDE_GD_ATA depends on LEDS_TRIGGERS help This allows LEDs to be controlled by IDE disk activity. diff -ruN a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c --- a/drivers/mmc/core/core.c 2013-11-03 16:41:51.000000000 -0700 +++ b/drivers/mmc/core/core.c 2013-11-08 01:39:49.008020351 -0700 @@ -805,7 +805,7 @@ */ limit_us = 3000000; else - limit_us = 100000; + limit_us = 200000; /* * SDHC cards always use these fixed values. diff -ruN a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c --- a/drivers/mmc/core/sd.c 2013-11-03 16:41:51.000000000 -0700 +++ b/drivers/mmc/core/sd.c 2013-11-08 01:39:49.008020351 -0700 @@ -358,6 +358,15 @@ return -ENOMEM; } + /* + * Some SDHC cards, notably those with a Sandisk SD controller + * (also found in Kingston products) need a bit of slack + * before successfully handling the SWITCH command. So far, + * cards identifying themselves as "SD04G" and "SD08G" are + * affected + */ + udelay(100); + err = mmc_sd_switch(card, 1, 0, 1, status); if (err) goto out; diff -ruN a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c --- a/drivers/mmc/host/mvsdio.c 2013-11-03 16:41:51.000000000 -0700 +++ b/drivers/mmc/host/mvsdio.c 2013-11-08 01:39:49.028021127 -0700 @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -148,6 +149,7 @@ dev_dbg(host->dev, "cmd %d (hw state 0x%04x)\n", cmd->opcode, mvsd_read(MVSD_HW_STATE)); + if (cmd->opcode == SD_SWITCH) mdelay(1); /* Voodoo */ cmdreg = MVSD_CMD_INDEX(cmd->opcode); diff -ruN a/include/linux/bubba3.h b/include/linux/bubba3.h --- a/include/linux/bubba3.h 1969-12-31 17:00:00.000000000 -0700 +++ b/include/linux/bubba3.h 2013-11-08 01:39:49.028021127 -0700 @@ -0,0 +1,41 @@ +/* + * (C) Copyright 2010 + * Excito elektronik i SkÃ¥ne AB + * by: Tor Krill + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef __BUBBA3_H +#define __BUBBA3_H + +/* + * GPIO definitions + */ +#define B3_LED_INTERVAL (37) +#define B3_FRONT_LED_GREEN (38) +#define B3_POWER_BUTTON (39) +#define B3_BUZZER_ENABLE (40) +#define B3_FRONT_LED_RED (41) +#define B3_FRONT_LED_BLUE (42) +#define B3_HW_ID0 (43) +#define B3_HW_ID1 (44) +#define B3_HW_ID2 (45) +#define B3_BUZ_4KHZ (46) + +#endif diff -ruN a/include/linux/nsa3xx-hwmon.h b/include/linux/nsa3xx-hwmon.h --- a/include/linux/nsa3xx-hwmon.h 1969-12-31 17:00:00.000000000 -0700 +++ b/include/linux/nsa3xx-hwmon.h 2013-11-08 01:39:49.028021127 -0700 @@ -0,0 +1,21 @@ +/* + * include/linux/nsa3xx.hwmon.h + * + * Platform data structure for ZyXEL NSA3xx hwmon driver + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __LINUX_NSA3XX_HWMON_H +#define __LINUX_NSA3XX_HWMON_H + +struct nsa3xx_hwmon_platform_data { + /* GPIO pins */ + unsigned act_pin; + unsigned clk_pin; + unsigned data_pin; +}; + +#endif /* __LINUX_NSA3XX_HWMON_H */