PKGBUILDs/community/grub-gfx/040_all_grub-0.96-nxstack.patch
2009-10-09 21:15:33 -05:00

623 lines
18 KiB
Diff
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

Fix NX segfaulting on amd64.
Patch by Peter Jones.
http://lists.gnu.org/archive/html/bug-grub/2005-03/msg00011.html
--- grub-0.97/grub/asmstub.c
+++ grub-0.97/grub/asmstub.c
@@ -42,6 +42,7 @@
#include <sys/time.h>
#include <termios.h>
#include <signal.h>
+#include <sys/mman.h>
#ifdef __linux__
# include <sys/ioctl.h> /* ioctl */
@@ -79,7 +80,7 @@
struct apm_info apm_bios_info;
/* Emulation requirements. */
-char *grub_scratch_mem = 0;
+void *grub_scratch_mem = 0;
struct geometry *disks = 0;
@@ -103,14 +104,62 @@
static unsigned int serial_speed;
#endif /* SIMULATE_SLOWNESS_OF_SERIAL */
+/* This allocates page-aligned storage of the specified size, which must be
+ * a multiple of the page size as determined by calling sysconf(_SC_PAGESIZE)
+ */
+#ifdef __linux__
+static void *
+grub_mmap_alloc(size_t len)
+{
+ int mmap_flags = MAP_ANONYMOUS|MAP_PRIVATE|MAP_EXECUTABLE;
+
+#ifdef MAP_32BIT
+ mmap_flags |= MAP_32BIT;
+#endif
+ /* Mark the simulated stack executable, as GCC uses stack trampolines
+ * to implement nested functions. */
+ return mmap(NULL, len, PROT_READ|PROT_WRITE|PROT_EXEC, mmap_flags, -1, 0);
+}
+#else /* !defined(__linux__) */
+static void *
+grub_mmap_alloc(size_t len)
+{
+ int fd = 0, offset = 0, ret = 0;
+ void *pa = MAP_FAILED;
+ char template[] = "/tmp/grub_mmap_alloc_XXXXXX";
+ errno_t e;
+
+ fd = mkstemp(template);
+ if (fd < 0)
+ return pa;
+
+ unlink(template);
+
+ ret = ftruncate(fd, len);
+ if (ret < 0)
+ return pa;
+
+ /* Mark the simulated stack executable, as GCC uses stack trampolines
+ * to implement nested functions. */
+ pa = mmap(NULL, len, PROT_READ|PROT_WRITE|PROT_EXEC,
+ MAP_PRIVATE|MAP_EXECUTABLE, fd, offset);
+
+ e = errno;
+ close(fd);
+ errno = e;
+ return pa;
+}
+#endif /* defined(__linux__) */
+
/* The main entry point into this mess. */
int
grub_stage2 (void)
{
/* These need to be static, because they survive our stack transitions. */
static int status = 0;
- static char *realstack;
- char *scratch, *simstack;
+ static void *realstack;
+ void *simstack_alloc_base, *simstack;
+ size_t simstack_size, page_size;
int i;
/* We need a nested function so that we get a clean stack frame,
@@ -140,9 +189,35 @@
}
assert (grub_scratch_mem == 0);
- scratch = malloc (0x100000 + EXTENDED_MEMSIZE + 15);
- assert (scratch);
- grub_scratch_mem = (char *) ((((int) scratch) >> 4) << 4);
+
+ /* Allocate enough pages for 0x100000 + EXTENDED_SIZE + 15, and
+ * make sure the memory is aligned to a multiple of the system's
+ * page size */
+ page_size = sysconf (_SC_PAGESIZE);
+ simstack_size = ( 0x100000 + EXTENDED_MEMSIZE + 15);
+ if (simstack_size % page_size)
+ {
+ /* If we're not on a page_size boundary, round up to the next one */
+ simstack_size &= ~(page_size-1);
+ simstack_size += page_size;
+ }
+
+ /* Add one for a PROT_NONE boundary page at each end. */
+ simstack_size += 2 * page_size;
+
+ simstack_alloc_base = grub_mmap_alloc(simstack_size);
+ assert (simstack_alloc_base != MAP_FAILED);
+
+ /* mark pages above and below our simstack area as innaccessable.
+ * If the implementation we're using doesn't support that, then the
+ * new protection modes are undefined. It's safe to just ignore
+ * them, though. It'd be nice if we knew that we'd get a SEGV for
+ * touching the area, but that's all. it'd be nice to have. */
+ mprotect (simstack_alloc_base, page_size, PROT_NONE);
+ mprotect ((void *)((unsigned long)simstack_alloc_base +
+ simstack_size - page_size), page_size, PROT_NONE);
+
+ grub_scratch_mem = (void *)((unsigned long)simstack_alloc_base + page_size);
/* FIXME: simulate the memory holes using mprot, if available. */
@@ -215,7 +290,7 @@
device_map = 0;
free (disks);
disks = 0;
- free (scratch);
+ munmap(simstack_alloc_base, simstack_size);
grub_scratch_mem = 0;
if (serial_device)
--- grub-0.97/stage2/builtins.c
+++ grub-0.97/stage2/builtins.c
@@ -131,63 +131,98 @@
}
+/* blocklist_read_helper nee disk_read_blocklist_func was a nested
+ * function, to which pointers were taken and exposed globally. Even
+ * in the GNU-C nested functions extension, they have local linkage,
+ * and aren't guaranteed to be accessable *at all* outside of their
+ * containing scope.
+ *
+ * Above and beyond all of that, the variables within blocklist_func_context
+ * are originally local variables, with local (not even static) linkage,
+ * from within blocklist_func. These were each referenced by
+ * disk_read_blocklist_func, which is only called from other functions
+ * through a globally scoped pointer.
+ *
+ * The documentation in GCC actually uses the words "all hell will break
+ * loose" to describe this scenario.
+ *
+ * Also, "start_sector" was also used uninitialized, but gcc doesn't warn
+ * about it (possibly because of the scoping madness?)
+ */
+
+static struct {
+ int start_sector;
+ int num_sectors;
+ int num_entries;
+ int last_length;
+} blocklist_func_context = {
+ .start_sector = 0,
+ .num_sectors = 0,
+ .num_entries = 0,
+ .last_length = 0
+};
+
+/* Collect contiguous blocks into one entry as many as possible,
+ and print the blocklist notation on the screen. */
+static void
+blocklist_read_helper (int sector, int offset, int length)
+{
+ int *start_sector = &blocklist_func_context.start_sector;
+ int *num_sectors = &blocklist_func_context.num_sectors;
+ int *num_entries = &blocklist_func_context.num_entries;
+ int *last_length = &blocklist_func_context.last_length;
+
+ if (*num_sectors > 0)
+ {
+ if (*start_sector + *num_sectors == sector
+ && offset == 0 && *last_length == SECTOR_SIZE)
+ {
+ *num_sectors++;
+ *last_length = length;
+ return;
+ }
+ else
+ {
+ if (*last_length == SECTOR_SIZE)
+ grub_printf ("%s%d+%d", *num_entries ? "," : "",
+ *start_sector - part_start, *num_sectors);
+ else if (*num_sectors > 1)
+ grub_printf ("%s%d+%d,%d[0-%d]", *num_entries ? "," : "",
+ *start_sector - part_start, *num_sectors-1,
+ *start_sector + *num_sectors-1 - part_start,
+ *last_length);
+ else
+ grub_printf ("%s%d[0-%d]", *num_entries ? "," : "",
+ *start_sector - part_start, *last_length);
+ *num_entries++;
+ *num_sectors = 0;
+ }
+ }
+
+ if (offset > 0)
+ {
+ grub_printf("%s%d[%d-%d]", *num_entries ? "," : "",
+ sector-part_start, offset, offset+length);
+ *num_entries++;
+ }
+ else
+ {
+ *start_sector = sector;
+ *num_sectors = 1;
+ *last_length = length;
+ }
+}
+
/* blocklist */
static int
blocklist_func (char *arg, int flags)
{
char *dummy = (char *) RAW_ADDR (0x100000);
- int start_sector;
- int num_sectors = 0;
- int num_entries = 0;
- int last_length = 0;
-
- auto void disk_read_blocklist_func (int sector, int offset, int length);
-
- /* Collect contiguous blocks into one entry as many as possible,
- and print the blocklist notation on the screen. */
- auto void disk_read_blocklist_func (int sector, int offset, int length)
- {
- if (num_sectors > 0)
- {
- if (start_sector + num_sectors == sector
- && offset == 0 && last_length == SECTOR_SIZE)
- {
- num_sectors++;
- last_length = length;
- return;
- }
- else
- {
- if (last_length == SECTOR_SIZE)
- grub_printf ("%s%d+%d", num_entries ? "," : "",
- start_sector - part_start, num_sectors);
- else if (num_sectors > 1)
- grub_printf ("%s%d+%d,%d[0-%d]", num_entries ? "," : "",
- start_sector - part_start, num_sectors-1,
- start_sector + num_sectors-1 - part_start,
- last_length);
- else
- grub_printf ("%s%d[0-%d]", num_entries ? "," : "",
- start_sector - part_start, last_length);
- num_entries++;
- num_sectors = 0;
- }
- }
-
- if (offset > 0)
- {
- grub_printf("%s%d[%d-%d]", num_entries ? "," : "",
- sector-part_start, offset, offset+length);
- num_entries++;
- }
- else
- {
- start_sector = sector;
- num_sectors = 1;
- last_length = length;
- }
- }
+ int *start_sector = &blocklist_func_context.start_sector;
+ int *num_sectors = &blocklist_func_context.num_sectors;
+ int *num_entries = &blocklist_func_context.num_entries;
+
/* Open the file. */
if (! grub_open (arg))
return 1;
@@ -204,15 +241,15 @@
grub_printf (")");
/* Read in the whole file to DUMMY. */
- disk_read_hook = disk_read_blocklist_func;
+ disk_read_hook = blocklist_read_helper;
if (! grub_read (dummy, -1))
goto fail;
/* The last entry may not be printed yet. Don't check if it is a
* full sector, since it doesn't matter if we read too much. */
- if (num_sectors > 0)
- grub_printf ("%s%d+%d", num_entries ? "," : "",
- start_sector - part_start, num_sectors);
+ if (*num_sectors > 0)
+ grub_printf ("%s%d+%d", *num_entries ? "," : "",
+ *start_sector - part_start, *num_sectors);
grub_printf ("\n");
@@ -1868,6 +1905,77 @@
/* install */
+static struct {
+ int saved_sector;
+ int installaddr;
+ int installlist;
+ char *stage2_first_buffer;
+} install_func_context = {
+ .saved_sector = 0,
+ .installaddr = 0,
+ .installlist = 0,
+ .stage2_first_buffer = NULL,
+};
+
+/* Save the first sector of Stage2 in STAGE2_SECT. */
+/* Formerly disk_read_savesect_func with local scope inside install_func */
+static void
+install_savesect_helper(int sector, int offset, int length)
+{
+ if (debug)
+ printf ("[%d]", sector);
+
+ /* ReiserFS has files which sometimes contain data not aligned
+ on sector boundaries. Returning an error is better than
+ silently failing. */
+ if (offset != 0 || length != SECTOR_SIZE)
+ errnum = ERR_UNALIGNED;
+
+ install_func_context.saved_sector = sector;
+}
+
+/* Write SECTOR to INSTALLLIST, and update INSTALLADDR and INSTALLSECT. */
+/* Formerly disk_read_blocklist_func with local scope inside install_func */
+static void
+install_blocklist_helper (int sector, int offset, int length)
+{
+ int *installaddr = &install_func_context.installaddr;
+ int *installlist = &install_func_context.installlist;
+ char **stage2_first_buffer = &install_func_context.stage2_first_buffer;
+ /* Was the last sector full? */
+ static int last_length = SECTOR_SIZE;
+
+ if (debug)
+ printf("[%d]", sector);
+
+ if (offset != 0 || last_length != SECTOR_SIZE)
+ {
+ /* We found a non-sector-aligned data block. */
+ errnum = ERR_UNALIGNED;
+ return;
+ }
+
+ last_length = length;
+
+ if (*((unsigned long *) (*installlist - 4))
+ + *((unsigned short *) *installlist) != sector
+ || *installlist == (int) *stage2_first_buffer + SECTOR_SIZE + 4)
+ {
+ *installlist -= 8;
+
+ if (*((unsigned long *) (*installlist - 8)))
+ errnum = ERR_WONT_FIT;
+ else
+ {
+ *((unsigned short *) (*installlist + 2)) = (*installaddr >> 4);
+ *((unsigned long *) (*installlist - 4)) = sector;
+ }
+ }
+
+ *((unsigned short *) *installlist) += 1;
+ *installaddr += 512;
+}
+
static int
install_func (char *arg, int flags)
{
@@ -1875,8 +1983,12 @@
char *stage1_buffer = (char *) RAW_ADDR (0x100000);
char *stage2_buffer = stage1_buffer + SECTOR_SIZE;
char *old_sect = stage2_buffer + SECTOR_SIZE;
- char *stage2_first_buffer = old_sect + SECTOR_SIZE;
- char *stage2_second_buffer = stage2_first_buffer + SECTOR_SIZE;
+ /* stage2_first_buffer used to be defined as:
+ * char *stage2_first_buffer = old_sect + SECTOR_SIZE; */
+ char **stage2_first_buffer = &install_func_context.stage2_first_buffer;
+ /* and stage2_second_buffer was:
+ * char *stage2_second_buffer = stage2_first_buffer + SECTOR_SIZE; */
+ char *stage2_second_buffer = old_sect + SECTOR_SIZE + SECTOR_SIZE;
/* XXX: Probably SECTOR_SIZE is reasonable. */
char *config_filename = stage2_second_buffer + SECTOR_SIZE;
char *dummy = config_filename + SECTOR_SIZE;
@@ -1885,10 +1997,11 @@
int src_drive, src_partition, src_part_start;
int i;
struct geometry dest_geom, src_geom;
- int saved_sector;
+ int *saved_sector = &install_func_context.saved_sector;
int stage2_first_sector, stage2_second_sector;
char *ptr;
- int installaddr, installlist;
+ int *installaddr = &install_func_context.installaddr;
+ int *installlist = &install_func_context.installlist;
/* Point to the location of the name of a configuration file in Stage 2. */
char *config_file_location;
/* If FILE is a Stage 1.5? */
@@ -1897,67 +2010,13 @@
int is_open = 0;
/* If LBA is forced? */
int is_force_lba = 0;
- /* Was the last sector full? */
- int last_length = SECTOR_SIZE;
-
+
+ *stage2_first_buffer = old_sect + SECTOR_SIZE;
#ifdef GRUB_UTIL
/* If the Stage 2 is in a partition mounted by an OS, this will store
the filename under the OS. */
char *stage2_os_file = 0;
#endif /* GRUB_UTIL */
-
- auto void disk_read_savesect_func (int sector, int offset, int length);
- auto void disk_read_blocklist_func (int sector, int offset, int length);
-
- /* Save the first sector of Stage2 in STAGE2_SECT. */
- auto void disk_read_savesect_func (int sector, int offset, int length)
- {
- if (debug)
- printf ("[%d]", sector);
-
- /* ReiserFS has files which sometimes contain data not aligned
- on sector boundaries. Returning an error is better than
- silently failing. */
- if (offset != 0 || length != SECTOR_SIZE)
- errnum = ERR_UNALIGNED;
-
- saved_sector = sector;
- }
-
- /* Write SECTOR to INSTALLLIST, and update INSTALLADDR and
- INSTALLSECT. */
- auto void disk_read_blocklist_func (int sector, int offset, int length)
- {
- if (debug)
- printf("[%d]", sector);
-
- if (offset != 0 || last_length != SECTOR_SIZE)
- {
- /* We found a non-sector-aligned data block. */
- errnum = ERR_UNALIGNED;
- return;
- }
-
- last_length = length;
-
- if (*((unsigned long *) (installlist - 4))
- + *((unsigned short *) installlist) != sector
- || installlist == (int) stage2_first_buffer + SECTOR_SIZE + 4)
- {
- installlist -= 8;
-
- if (*((unsigned long *) (installlist - 8)))
- errnum = ERR_WONT_FIT;
- else
- {
- *((unsigned short *) (installlist + 2)) = (installaddr >> 4);
- *((unsigned long *) (installlist - 4)) = sector;
- }
- }
-
- *((unsigned short *) installlist) += 1;
- installaddr += 512;
- }
/* First, check the GNU-style long option. */
while (1)
@@ -1987,10 +2049,10 @@
addr = skip_to (0, file);
/* Get the installation address. */
- if (! safe_parse_maxint (&addr, &installaddr))
+ if (! safe_parse_maxint (&addr, installaddr))
{
/* ADDR is not specified. */
- installaddr = 0;
+ *installaddr = 0;
ptr = addr;
errnum = 0;
}
@@ -2084,17 +2146,17 @@
= (dest_drive & BIOS_FLAG_FIXED_DISK);
/* Read the first sector of Stage 2. */
- disk_read_hook = disk_read_savesect_func;
- if (grub_read (stage2_first_buffer, SECTOR_SIZE) != SECTOR_SIZE)
+ disk_read_hook = install_savesect_helper;
+ if (grub_read (*stage2_first_buffer, SECTOR_SIZE) != SECTOR_SIZE)
goto fail;
- stage2_first_sector = saved_sector;
+ stage2_first_sector = *saved_sector;
/* Read the second sector of Stage 2. */
if (grub_read (stage2_second_buffer, SECTOR_SIZE) != SECTOR_SIZE)
goto fail;
- stage2_second_sector = saved_sector;
+ stage2_second_sector = *saved_sector;
/* Check for the version of Stage 2. */
if (*((short *) (stage2_second_buffer + STAGE2_VER_MAJ_OFFS))
@@ -2110,27 +2172,27 @@
/* If INSTALLADDR is not specified explicitly in the command-line,
determine it by the Stage 2 id. */
- if (! installaddr)
+ if (! *installaddr)
{
if (! is_stage1_5)
/* Stage 2. */
- installaddr = 0x8000;
+ *installaddr = 0x8000;
else
/* Stage 1.5. */
- installaddr = 0x2000;
+ *installaddr = 0x2000;
}
*((unsigned long *) (stage1_buffer + STAGE1_STAGE2_SECTOR))
= stage2_first_sector;
*((unsigned short *) (stage1_buffer + STAGE1_STAGE2_ADDRESS))
- = installaddr;
+ = *installaddr;
*((unsigned short *) (stage1_buffer + STAGE1_STAGE2_SEGMENT))
- = installaddr >> 4;
+ = *installaddr >> 4;
- i = (int) stage2_first_buffer + SECTOR_SIZE - 4;
+ i = (int) *stage2_first_buffer + SECTOR_SIZE - 4;
while (*((unsigned long *) i))
{
- if (i < (int) stage2_first_buffer
+ if (i < (int) *stage2_first_buffer
|| (*((int *) (i - 4)) & 0x80000000)
|| *((unsigned short *) i) >= 0xA00
|| *((short *) (i + 2)) == 0)
@@ -2144,13 +2206,13 @@
i -= 8;
}
- installlist = (int) stage2_first_buffer + SECTOR_SIZE + 4;
- installaddr += SECTOR_SIZE;
+ *installlist = (int) *stage2_first_buffer + SECTOR_SIZE + 4;
+ *installaddr += SECTOR_SIZE;
/* Read the whole of Stage2 except for the first sector. */
grub_seek (SECTOR_SIZE);
- disk_read_hook = disk_read_blocklist_func;
+ disk_read_hook = install_blocklist_helper;
if (! grub_read (dummy, -1))
goto fail;
@@ -2233,7 +2295,7 @@
/* Skip the first sector. */
grub_seek (SECTOR_SIZE);
- disk_read_hook = disk_read_savesect_func;
+ disk_read_hook = install_savesect_helper;
if (grub_read (stage2_buffer, SECTOR_SIZE) != SECTOR_SIZE)
goto fail;
@@ -2303,7 +2365,7 @@
else
#endif /* GRUB_UTIL */
{
- if (! devwrite (saved_sector - part_start, 1, stage2_buffer))
+ if (! devwrite (*saved_sector - part_start, 1, stage2_buffer))
goto fail;
}
}
@@ -2325,7 +2387,7 @@
goto fail;
}
- if (fwrite (stage2_first_buffer, 1, SECTOR_SIZE, fp) != SECTOR_SIZE)
+ if (fwrite (*stage2_first_buffer, 1, SECTOR_SIZE, fp) != SECTOR_SIZE)
{
fclose (fp);
errnum = ERR_WRITE;
@@ -2352,7 +2414,7 @@
goto fail;
if (! devwrite (stage2_first_sector - src_part_start, 1,
- stage2_first_buffer))
+ *stage2_first_buffer))
goto fail;
if (! devwrite (stage2_second_sector - src_part_start, 1,
--- grub-0.97/stage2/shared.h
+++ grub-0.97/stage2/shared.h
@@ -36,8 +36,8 @@
/* Maybe redirect memory requests through grub_scratch_mem. */
#ifdef GRUB_UTIL
-extern char *grub_scratch_mem;
-# define RAW_ADDR(x) ((x) + (int) grub_scratch_mem)
+extern void *grub_scratch_mem;
+# define RAW_ADDR(x) ((x) + (unsigned long) grub_scratch_mem)
# define RAW_SEG(x) (RAW_ADDR ((x) << 4) >> 4)
#else
# define RAW_ADDR(x) (x)