mirror of
https://github.com/archlinuxarm/PKGBUILDs.git
synced 2024-11-08 22:45:43 +00:00
109 lines
3.7 KiB
Diff
109 lines
3.7 KiB
Diff
diff -ruN a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
|
|
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi 2012-12-21 20:19:00.000000000 -0500
|
|
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi 2012-12-25 14:07:54.000000000 -0500
|
|
@@ -5,6 +5,10 @@
|
|
compatible = "marvell,88f6282-pinctrl";
|
|
reg = <0x10000 0x20>;
|
|
|
|
+ pmx_nand: pmx-nand {
|
|
+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3","mpp4", "mpp5", "mpp18", "mpp19";
|
|
+ marvell,function = "nand";
|
|
+ };
|
|
pmx_sata0: pmx-sata0 {
|
|
marvell,pins = "mpp5", "mpp21", "mpp23";
|
|
marvell,function = "sata0";
|
|
@@ -21,11 +25,14 @@
|
|
marvell,pins = "mpp8", "mpp9";
|
|
marvell,function = "twsi0";
|
|
};
|
|
+ pmx_twsi1: pmx-twsi1 {
|
|
+ marvell,pins = "mpp36", "mpp37";
|
|
+ marvell,function = "twsi1";
|
|
+ };
|
|
pmx_uart0: pmx-uart0 {
|
|
marvell,pins = "mpp10", "mpp11";
|
|
marvell,function = "uart0";
|
|
};
|
|
-
|
|
pmx_uart1: pmx-uart1 {
|
|
marvell,pins = "mpp13", "mpp14";
|
|
marvell,function = "uart1";
|
|
@@ -39,6 +46,7 @@
|
|
#size-cells = <0>;
|
|
interrupts = <32>;
|
|
clock-frequency = <100000>;
|
|
+ clocks = <&gate_clk 7>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
diff -ruN a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
|
|
--- a/arch/arm/boot/dts/kirkwood-topkick.dts 2012-12-21 20:19:00.000000000 -0500
|
|
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts 2012-12-25 14:00:09.000000000 -0500
|
|
@@ -82,4 +82,21 @@
|
|
gpios = <&gpio1 16 1>;
|
|
};
|
|
};
|
|
+ regulators {
|
|
+ compatible = "simple-bus";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sata0_power: regulator@1 {
|
|
+ compatible = "regulator-fixed";
|
|
+ reg = <1>;
|
|
+ regulator-name = "SATA0 Power";
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ enable-active-high;
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ gpio = <&gpio1 4 0>;
|
|
+ };
|
|
+ };
|
|
};
|
|
diff -ruN a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
|
|
--- a/arch/arm/boot/dts/kirkwood.dtsi 2012-12-21 20:19:00.000000000 -0500
|
|
+++ b/arch/arm/boot/dts/kirkwood.dtsi 2012-12-25 14:01:42.000000000 -0500
|
|
@@ -144,6 +144,7 @@
|
|
compatible = "marvell,orion-ehci";
|
|
reg = <0x50000 0x1000>;
|
|
interrupts = <19>;
|
|
+ clocks = <&gate_clk 3>;
|
|
status = "okay";
|
|
};
|
|
|
|
diff -ruN a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
|
|
--- a/arch/arm/mach-kirkwood/board-dt.c 2012-12-21 20:19:00.000000000 -0500
|
|
+++ b/arch/arm/mach-kirkwood/board-dt.c 2012-12-25 13:58:18.000000000 -0500
|
|
@@ -67,6 +67,9 @@
|
|
orion_clkdev_add(NULL, "mv643xx_eth_port.1",
|
|
of_clk_get_from_provider(&clkspec));
|
|
|
|
+ clkspec.args[0] = CGC_BIT_SDIO;
|
|
+ orion_clkdev_add(NULL, "mvsdio",
|
|
+ of_clk_get_from_provider(&clkspec));
|
|
}
|
|
|
|
static void __init kirkwood_of_clk_init(void)
|
|
diff -ruN a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c
|
|
--- a/arch/arm/mach-kirkwood/board-usi_topkick.c 2012-12-21 20:19:00.000000000 -0500
|
|
+++ b/arch/arm/mach-kirkwood/board-usi_topkick.c 2012-12-25 14:01:01.000000000 -0500
|
|
@@ -64,8 +64,6 @@
|
|
0
|
|
};
|
|
|
|
-#define TOPKICK_SATA0_PWR_ENABLE 36
|
|
-
|
|
void __init usi_topkick_init(void)
|
|
{
|
|
/*
|
|
@@ -73,9 +71,6 @@
|
|
*/
|
|
kirkwood_mpp_conf(topkick_mpp_config);
|
|
|
|
- /* SATA0 power enable */
|
|
- gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1);
|
|
-
|
|
kirkwood_ge00_init(&topkick_ge00_data);
|
|
kirkwood_sdio_init(&topkick_mvsdio_data);
|
|
}
|