mirror of
https://github.com/archlinuxarm/PKGBUILDs.git
synced 2024-09-19 22:08:32 +00:00
3d631704a8
New kernel package providing 16k framesize for bcm2712/RPi5. Very similar to linux-rpi but built off bcm2712_defconfig. Will work with Pi5 ONLY/will not boot on lower models. Since RPi Foundation has announced the 6.6 move[1] in the near future, just start tracking that branch now. 1. https://forums.raspberrypi.com/viewtopic.php?t=361116
45 lines
1.1 KiB
Plaintext
45 lines
1.1 KiB
Plaintext
# For more options and information see:
|
|
# http://rptl.io/configtxt
|
|
|
|
initramfs initramfs-linux.img followkernel
|
|
|
|
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
#dtparam=i2c_arm=on
|
|
#dtparam=i2s=on
|
|
#dtparam=spi=on
|
|
|
|
# Additional overlays and parameters are documented
|
|
# /boot/firmware/overlays/README
|
|
|
|
# Automatically load overlays for detected cameras
|
|
camera_auto_detect=1
|
|
|
|
# Automatically load overlays for detected DSI displays
|
|
display_auto_detect=1
|
|
|
|
# Enable DRM VC4 V3D driver
|
|
dtoverlay=vc4-kms-v3d
|
|
max_framebuffers=2
|
|
|
|
# Uncomment if hdmi display is not detected and composite is being output
|
|
#hdmi_force_hotplug=1
|
|
|
|
# Uncomment if you want to disable wifi or bluetooth respectively
|
|
#dtoverlay=disable-wifi
|
|
#dtoverlay=disable-bt
|
|
|
|
# Uncomment this to enable infrared communication.
|
|
#dtoverlay=gpio-ir,gpio_pin=17
|
|
#dtoverlay=gpio-ir-tx,gpio_pin=18
|
|
|
|
# Run as fast as firmware / board allows
|
|
arm_boost=1
|
|
|
|
[cm4]
|
|
# Enable host mode on the 2711 built-in XHCI USB controller.
|
|
# This line should be removed if the legacy DWC2 controller is required
|
|
# (e.g. for USB device mode) or if USB support is not required.
|
|
otg_mode=1
|
|
|
|
[all]
|