mirror of
https://github.com/archlinuxarm/PKGBUILDs.git
synced 2024-12-08 23:03:46 +00:00
67 lines
2.3 KiB
Text
67 lines
2.3 KiB
Text
# mdadm configuration file
|
|
#
|
|
# mdadm will function properly without the use of a configuration file,
|
|
# but this file is useful for keeping track of arrays and member disks.
|
|
# In general, a mdadm.conf file is created, and updated, after arrays
|
|
# are created. This is the opposite behavior of /etc/raidtab which is
|
|
# created prior to array construction.
|
|
#
|
|
#
|
|
# the config file takes two types of lines:
|
|
#
|
|
# DEVICE lines specify a list of devices of where to look for
|
|
# potential member disks
|
|
#
|
|
# ARRAY lines specify information about how to identify arrays so
|
|
# so that they can be activated
|
|
#
|
|
|
|
|
|
# You can have more than one device line and use wild cards. The first
|
|
# example includes SCSI the first partition of SCSI disks /dev/sdb,
|
|
# /dev/sdc, /dev/sdd, /dev/sdj, /dev/sdk, and /dev/sdl. The second
|
|
# line looks for array slices on IDE disks.
|
|
#
|
|
#DEVICE /dev/sd[bcdjkl]1
|
|
#DEVICE /dev/hda1 /dev/hdb1
|
|
#
|
|
# The designation "partitions" will scan all partitions found in
|
|
# /proc/partitions
|
|
DEVICE partitions
|
|
|
|
|
|
# ARRAY lines specify an array to assemble and a method of identification.
|
|
# Arrays can currently be identified by using a UUID, superblock minor number,
|
|
# or a listing of devices.
|
|
#
|
|
# super-minor is usually the minor number of the metadevice
|
|
# UUID is the Universally Unique Identifier for the array
|
|
# Each can be obtained using
|
|
#
|
|
# mdadm -D <md>
|
|
#
|
|
# To capture the UUIDs for all your RAID arrays to this file, run these:
|
|
# to get a list of running arrays:
|
|
# # mdadm -D --scan >>/etc/mdadm.conf
|
|
# to get a list from superblocks:
|
|
# # mdadm -E --scan >>/etc/mdadm.conf
|
|
#
|
|
#ARRAY /dev/md0 UUID=3aaa0122:29827cfa:5331ad66:ca767371
|
|
#ARRAY /dev/md1 super-minor=1
|
|
#ARRAY /dev/md2 devices=/dev/hda1,/dev/hdb1
|
|
#
|
|
# ARRAY lines can also specify a "spare-group" for each array. mdadm --monitor
|
|
# will then move a spare between arrays in a spare-group if one array has a
|
|
# failed drive but no spare
|
|
#ARRAY /dev/md4 uuid=b23f3c6d:aec43a9f:fd65db85:369432df spare-group=group1
|
|
#ARRAY /dev/md5 uuid=19464854:03f71b1b:e0df2edd:246cc977 spare-group=group1
|
|
#
|
|
|
|
|
|
# When used in --follow (aka --monitor) mode, mdadm needs a
|
|
# mail address and/or a program. To start mdadm's monitor mode, add
|
|
# "mdadm" to your DAEMONS array in /etc/rc.conf
|
|
#
|
|
# If the lines are not found, mdadm will exit quietly
|
|
#MAILADDR root@mydomain.tld
|
|
#PROGRAM /usr/sbin/handle-mdadm-events
|