PKGBUILDs/alarm/uboot-olinuxino/0001-arch-linux-arm-modifications.patch

From 2db7b7cd826260180268077b7f22e7380d9b3390 Mon Sep 17 00:00:00 2001
From: Kevin Mihelich <kevin@archlinuxarm.org>
Date: Sat, 31 Oct 2015 10:05:29 -0600
Subject: [PATCH] arch linux arm modifications

Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
---
 include/configs/mx23_olinuxino.h | 134 ++++++++++++++++++---------------------
 1 file changed, 60 insertions(+), 74 deletions(-)

diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h
index 529f73b..3b57a8a 100644
--- a/include/configs/mx23_olinuxino.h
+++ b/include/configs/mx23_olinuxino.h
@@ -24,6 +24,17 @@
 #define CONFIG_CMD_MMC
 #define CONFIG_CMD_USB
 
+/* Arch Linux ARM extras */
+#define CONFIG_IDENT_STRING " Arch Linux ARM"
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_PART
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_SUPPORT_RAW_INITRD
+
 /* Memory configuration */
 #define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
 #define PHYS_SDRAM_1			0x40000000	/* Base address */
@@ -64,92 +75,67 @@
 #endif
 
 /* Booting Linux */
-#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTDELAY	1
 #define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_LOADADDR		0x42000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
 /* Extra Environment */
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"update_sd_firmware_filename=u-boot.sd\0" \
-	"update_sd_firmware="		/* Update the SD firmware partition */ \
-		"if mmc rescan ; then "	\
-		"if tftp ${update_sd_firmware_filename} ; then " \
-		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
-		"setexpr fw_sz ${fw_sz} + 1 ; "	\
-		"mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
-		"fi ; "	\
-		"fi\0" \
-	"script=boot.scr\0"	\
-	"uimage=uImage\0" \
 	"console=ttyAMA0\0" \
-	"fdt_file=imx23-olinuxino.dtb\0" \
-	"fdt_addr=0x41000000\0" \
-	"boot_fdt=try\0" \
-	"ip_dyn=yes\0" \
-	"mmcdev=0\0" \
-	"mmcpart=2\0" \
-	"mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
+	"fdtfile=imx23-olinuxino.dtb\0" \
+	"fdtaddr=0x41000000\0" \
+	"rdfile=initramfs-linux.img\0" \
+	"rdaddr=0x42A00000\0" \
+	"bootdir=/boot\0" \
+	"fdtdir=/boot/dtbs\0" \
+	"bootfile=zImage\0" \
+	"optargs=\0" \
+	"cmdline=\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
-	"loadbootscript="  \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; "	\
-		"source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootm; " \
-		"fi;\0" \
-	"netargs=setenv bootargs console=${console},${baudrate} " \
-		"root=/dev/nfs " \
-		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-	"netboot=echo Booting from net ...; " \
-		"usb start; " \
-		"run netargs; "	\
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${uimage}; " \
-		"if test ${boot_fdt} = yes; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+		"${optargs} " \
+		"root=${root} " \
+		"${cmdline}\0" \
+	"loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+	"loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
+	"loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
+	"mmcboot=usb start;" \
+		"for devtype in mmc usb; do " \
+			"setenv devnum 0;" \
+			"while ${devtype} dev ${devnum}; do " \
+				"echo ${devtype} found on device ${devnum};" \
+				"if test ${devtype} = mmc; then setenv bootpart ${devnum}:2; else setenv bootpart ${devnum}:1; fi;" \
+				"part uuid ${devtype} ${bootpart} uuid;" \
+				"setenv root PARTUUID=${uuid} rw rootwait fixrtc;" \
+				"echo Checking for: ${bootdir}/uEnv.txt ...;" \
+				"if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
+					"load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
+					"env import -t ${loadaddr} ${filesize};" \
+					"echo Loaded environment from ${bootdir}/uEnv.txt;" \
+					"echo Checking if uenvcmd is set ...;" \
+					"if test -n ${uenvcmd}; then " \
+						"echo Running uenvcmd ...;" \
+						"run uenvcmd;" \
+					"fi;" \
+				"fi;" \
+				"if run loadimage; then " \
+					"run mmcargs;" \
+					"if run loadfdt; then " \
+						"if run loadrd; then " \
+							"bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
+						"else " \
+							"bootz ${loadaddr} - ${fdtaddr};" \
+						"fi;" \
+					"fi;" \
 				"else " \
-					"echo WARN: Cannot load the DT; " \
+					"echo No kernel found;" \
 				"fi;" \
-			"fi; " \
-		"else " \
-			"bootm; " \
-		"fi;\0"
+				"setexpr devnum ${devnum} + 1;" \
+			"done;" \
+		"done;\0"
 
 #define CONFIG_BOOTCOMMAND \
-	"mmc dev ${mmcdev}; if mmc rescan; then " \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"else " \
-			"if run loaduimage; then " \
-				"run mmcboot; " \
-			"else run netboot; " \
-			"fi; " \
-		"fi; " \
-	"else run netboot; fi"
+	"run mmcboot;"
 
 /* The rest of the configuration is shared */
 #include <configs/mxs.h>
-- 
2.6.1