PKGBUILDs/alarm/uboot-wandboard/alarm.patch

diff -urN a/include/configs/wandboard.h b/include/configs/wandboard.h
--- a/include/configs/wandboard.h	2014-07-14 11:16:45.000000000 -0600
+++ b/include/configs/wandboard.h	2014-08-17 11:41:59.539017046 -0600
@@ -51,7 +51,7 @@
 #define CONFIG_CMD_BMODE
 #define CONFIG_CMD_SETEXPR
 
-#define CONFIG_BOOTDELAY		5
+#define CONFIG_BOOTDELAY		1
 
 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
@@ -76,6 +76,8 @@
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FS_GENERIC
 #define CONFIG_DOS_PARTITION
 
 /* Ethernet Configuration */
@@ -110,6 +112,8 @@
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 
+#define CONFIG_IDENT_STRING " Arch Linux ARM"
+
 #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
 #define CONFIG_DEFAULT_FDT_FILE		"imx6dl-wandboard.dtb"
 #elif defined(CONFIG_MX6Q)
@@ -117,42 +121,33 @@
 #endif
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"image=zImage\0" \
-	"console=ttymxc0\0" \
+	"bootfile=zImage\0" \
+	"bootdir=/boot\0" \
+	"console=ttymxc0,115200\0" \
 	"splashpos=m,m\0" \
 	"fdt_high=0xffffffff\0" \
+	"rdaddr=0x12A00000\0" \
+	"rdfile=initramfs-linux.img\0" \
 	"initrd_high=0xffffffff\0" \
-	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"fdt_addr=0x18000000\0" \
-	"boot_fdt=try\0" \
+	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"fdtdir=/boot/dtbs\0" \
+	"fdtaddr=0x18000000\0" \
 	"ip_dyn=yes\0" \
-	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
-	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
-	"update_sd_firmware_filename=u-boot.imx\0" \
-	"update_sd_firmware=" \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"if mmc dev ${mmcdev}; then "	\
-			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
-				"setexpr fw_sz ${filesize} / 0x200; " \
-				"setexpr fw_sz ${fw_sz} + 1; "	\
-				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
-			"fi; "	\
-		"fi\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}; run videoargs\0" \
+	"optargs=\0" \
+	"video=\0" \
+	"mmcdev=0\0" \
+	"mmcroot=/dev/mmcblk0p1 rw rootwait\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=${mmcroot} " \
+		"video=${video}\0" \
 	"videoargs=" \
 		"setenv nextcon 0; " \
 		"if hdmidet; then " \
 			"setenv bootargs ${bootargs} " \
 				"video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
 					"if=RGB24; " \
-			"setenv fbmen fbmem=28M; " \
+			"setenv fbmem fbmem=28M; " \
 			"setexpr nextcon ${nextcon} + 1; " \
 		"else " \
 			"echo - no HDMI monitor;" \
@@ -172,26 +167,38 @@
 			"echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
 		"fi; " \
 		"setenv bootargs ${bootargs} ${fbmem}\0" \
-	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
+	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+	"loadrd=load mmc ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
+	"loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
+	"mmcboot=mmc dev ${mmcdev}; " \
+		"if mmc rescan; then " \
+			"echo SD/MMC found on device ${mmcdev};" \
+			"setenv bootpart ${mmcdev}:1; " \
+			"echo Checking for: ${bootdir}/uEnv.txt ...;" \
+			"if test -e mmc ${bootpart} ${bootdir}/uEnv.txt; then " \
+				"load mmc ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
+				"env import -t ${loadaddr} ${filesize};" \
+				"echo Loaded environment from ${bootdir}/uEnv.txt;" \
+				"echo Checking if uenvcmd is set ...;" \
+				"if test -n ${uenvcmd}; then " \
+					"echo Running uenvcmd ...;" \
+					"run uenvcmd;" \
+				"fi;" \
 			"fi; " \
-		"else " \
-			"bootz; " \
+			"if run loadimage; then " \
+				"if run loadfdt; then " \
+					"run mmcargs;" \
+					"if run loadrd; then " \
+						"bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
+					"else " \
+						"bootz ${loadaddr} - ${fdtaddr};" \
+					"fi;" \
+				"else " \
+					"echo Kernel found, but no device tree found;" \
+				"fi;" \
+			"else " \
+				"echo No kernel found;" \
+			"fi;" \
 		"fi;\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs " \
@@ -203,10 +210,10 @@
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
-		"${get_cmd} ${image}; " \
+		"${get_cmd} ${bootfile}; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
+			"if ${get_cmd} ${fdtaddr} ${fdtfile}; then " \
+				"bootz ${loadaddr} - ${fdtaddr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
 					"bootz; " \
@@ -219,16 +226,7 @@
 		"fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "else run netboot; fi"
+	"run mmcboot;"
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP
@@ -269,6 +267,7 @@
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_CMD_BOOTZ
+#define CONFIG_SUPPORT_RAW_INITRD
 
 #ifndef CONFIG_SYS_DCACHE_OFF
 #define CONFIG_CMD_CACHE