mirror of
https://github.com/archlinuxarm/PKGBUILDs.git
synced 2024-12-08 23:03:46 +00:00
a1a1d6f3c6
Add bootargs, see: https://archlinuxarm.org/forum/viewtopic.php?f=65&t=16986
178 lines
6.2 KiB
INI
178 lines
6.2 KiB
INI
ODROIDC2-UBOOT-CONFIG
|
|
|
|
# Possible screen resolutions
|
|
# Uncomment only a single Line! The line with setenv written.
|
|
# At least one mode must be selected.
|
|
|
|
# Custom modeline!
|
|
# To use custom modeline you need to disable all the below resolutions
|
|
# and setup your own!
|
|
# For more information check our wiki:
|
|
# http://odroid.com/dokuwiki/doku.php?id=en:c2_hdmi_autosetting
|
|
# Example below:
|
|
# setenv m "custombuilt"
|
|
# setenv modeline "1920,1200,154000,74040,60,1920,1968,2000,2080,1200,1202,1208,1235,1,0,1"
|
|
|
|
# Auto Detection of Monitor settings based on your Screen information
|
|
# See: http://odroid.com/dokuwiki/doku.php?id=en:c2_auto_detect_display
|
|
setenv display_autodetect "true"
|
|
|
|
# 480 Lines (720x480)
|
|
# setenv m "480i60hz" # Interlaced 60Hz
|
|
# setenv m "480i_rpt" # Interlaced for Rear Projection Televisions 60Hz
|
|
# setenv m "480p60hz" # 480 Progressive 60Hz
|
|
# setenv m "480p_rpt" # 480 Progressive for Rear Projection Televisions 60Hz
|
|
|
|
# 576 Lines (720x576)
|
|
# setenv m "576i50hz" # Interlaced 50Hz
|
|
# setenv m "576i_rpt" # Interlaced for Rear Projection Televisions 50Hz
|
|
# setenv m "576p50hz" # Progressive 50Hz
|
|
# setenv m "576p_rpt" # Progressive for Rear Projection Televisions 50Hz
|
|
|
|
# 720 Lines (1280x720)
|
|
# setenv m "720p50hz" # 50Hz
|
|
# setenv m "720p60hz" # 60Hz
|
|
|
|
# 1080 Lines (1920x1080)
|
|
# setenv m "1080i60hz" # Interlaced 60Hz
|
|
setenv m "1080p60hz" # Progressive 60Hz
|
|
# setenv m "1080i50hz" # Interlaced 50Hz
|
|
# setenv m "1080p50hz" # Progressive 50Hz
|
|
# setenv m "1080p24hz" # Progressive 24Hz
|
|
|
|
# 4K (3840x2160)
|
|
# setenv m "2160p30hz" # Progressive 30Hz
|
|
# setenv m "2160p25hz" # Progressive 25Hz
|
|
# setenv m "2160p24hz" # Progressive 24Hz
|
|
# setenv m "smpte24hz" # Progressive 24Hz SMPTE
|
|
# setenv m "2160p50hz" # Progressive 50Hz
|
|
# setenv m "2160p60hz" # Progressive 60Hz
|
|
# setenv m "2160p50hz420" # Progressive 50Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)
|
|
# setenv m "2160p60hz420" # Progressive 60Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)
|
|
|
|
### VESA modes ###
|
|
# setenv m "640x480p60hz"
|
|
# setenv m "800x480p60hz"
|
|
# setenv m "480x800p60hz"
|
|
# setenv m "800x600p60hz"
|
|
# setenv m "1024x600p60hz"
|
|
# setenv m "1024x768p60hz"
|
|
# setenv m "1280x800p60hz"
|
|
# setenv m "1280x1024p60hz"
|
|
# setenv m "1360x768p60hz"
|
|
# setenv m "1440x900p60hz"
|
|
# setenv m "1600x900p60hz"
|
|
# setenv m "1680x1050p60hz"
|
|
# setenv m "1600x1200p60hz"
|
|
# setenv m "1920x1200p60hz"
|
|
# setenv m "2560x1080p60hz"
|
|
# setenv m "2560x1440p60hz"
|
|
# setenv m "2560x1600p60hz"
|
|
# setenv m "3440x1440p60hz"
|
|
|
|
# HDMI BPP Mode
|
|
setenv m_bpp "32"
|
|
# setenv m_bpp "24"
|
|
# setenv m_bpp "16"
|
|
|
|
# HDMI DVI/VGA modes
|
|
# By default its set to HDMI, if needed change below.
|
|
# Uncomment only a single Line.
|
|
# setenv vout "dvi"
|
|
# setenv vout "vga"
|
|
|
|
# HDMI HotPlug Detection control
|
|
# Allows you to force HDMI thinking that the cable is connected.
|
|
# true = HDMI will believe that cable is always connected
|
|
# false = will let board/monitor negotiate the connection status
|
|
setenv hpd "true"
|
|
# setenv hpd "false"
|
|
|
|
# Monitor output
|
|
# Controls if HDMI PHY should output anything to the monitor
|
|
setenv monitor_onoff "false" # true or false
|
|
|
|
# Server Mode (aka. No Graphics)
|
|
# Setting nographics to 1 will disable all video subsystem
|
|
# This mode is ideal of server type usage. (Saves ~300Mb of RAM)
|
|
setenv nographics "0"
|
|
|
|
# Meson Timer
|
|
# 1 - Meson Timer
|
|
# 0 - Arch Timer
|
|
# Using meson_timer improves the video playback however it breaks KVM (virtualization).
|
|
# Using arch timer allows KVM/Virtualization to work however you'll experience poor video
|
|
setenv mesontimer "1"
|
|
|
|
# UHS (Ultra High Speed) MicroSD mode enable/disable
|
|
setenv disableuhs "false"
|
|
|
|
# MicroSD Card Detection enable/disable
|
|
# Force the MMC controlled to believe that a card is connected.
|
|
setenv mmc_removable "true"
|
|
|
|
# USB Multi WebCam tweak
|
|
# Only enable this if you use it.
|
|
setenv usbmulticam "false"
|
|
|
|
# Disable/Enable ODROID-VU7 Touchscreen
|
|
setenv disable_vu7 "true"
|
|
|
|
# Default Console Device Setting
|
|
setenv condev "console=ttyS0,115200n8 console=tty0" # on both
|
|
|
|
# CPU Frequency / Cores control
|
|
###########################################
|
|
### WARNING!!! WARNING!!! WARNING!!!
|
|
# Before changing anything here please read the wiki entry:
|
|
# http://odroid.com/dokuwiki/doku.php?id=en:c2_set_cpu_freq
|
|
#
|
|
# MAX CPU's
|
|
# setenv maxcpus "1"
|
|
# setenv maxcpus "2"
|
|
# setenv maxcpus "3"
|
|
setenv maxcpus "4"
|
|
|
|
# MAX Frequency
|
|
# setenv max_freq "2016" # 2.016GHz
|
|
# setenv max_freq "1944" # 1.944GHz
|
|
# setenv max_freq "1944" # 1.944GHz
|
|
# setenv max_freq "1920" # 1.920GHz
|
|
# setenv max_freq "1896" # 1.896GHz
|
|
# setenv max_freq "1752" # 1.752GHz
|
|
# setenv max_freq "1680" # 1.680GHz
|
|
# setenv max_freq "1656" # 1.656GHz
|
|
setenv max_freq "1536" # 1.536GHz
|
|
|
|
|
|
|
|
###########################################
|
|
|
|
# Boot Arguments
|
|
if test "${display_autodetect}" = "true"; then usb pwren; hdmitx edid; fi
|
|
if test "${m}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi
|
|
if test "${disable_vu7}" = "false"; then setenv hid_quirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi
|
|
|
|
setenv bootargs "root=/dev/mmcblk0p1 rootwait rw ${condev} no_console_suspend hdmimode=${m} ${cmode} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam} ${hid_quirks}" SYSTEMD_CGROUP_ENABLE_LEGACY_FORCE=1
|
|
|
|
# Booting
|
|
|
|
setenv loadaddr "0x11000000"
|
|
setenv dtb_loadaddr "0x1000000"
|
|
setenv initrd_loadaddr "0x13000000"
|
|
|
|
load mmc 0:1 ${loadaddr} /boot/Image
|
|
load mmc 0:1 ${dtb_loadaddr} /boot/dtbs/meson64_odroidc2.dtb
|
|
|
|
fdt addr ${dtb_loadaddr}
|
|
if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
|
|
if test "${mesontimer}" = "1"; then fdt rm /timer; fi
|
|
|
|
if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
|
|
if test "${nographics}" = "1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /picdec; fdt rm /ppmgr; fi
|
|
if test "${nographics}" = "1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi
|
|
if test "${nographics}" = "1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi
|
|
|
|
load mmc 0:1 ${initrd_loadaddr} /boot/initramfs-linux.img
|
|
|
|
booti ${loadaddr} ${initrd_loadaddr}:${filesize} ${dtb_loadaddr}
|