archlinuxarm/PKGBUILDs
1
0
Fork 0
mirror of https://github.com/archlinuxarm/PKGBUILDs.git synced 2024-11-28 22:57:37 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
PKGBUILDs/core/binutils/binutils-2.24-strings-all-default.patch
Kevin Mihelich 34915c2f6a core/binutils to 2.24-8
2014-11-19 01:17:19 +00:00

310 lines
11 KiB
Diff
Raw Blame History

diff -cpr ../binutils-2.24.orig/binutils/config.in binutils/config.in
*** ../binutils-2.24.orig/binutils/config.in 2014-10-31 11:50:20.455222877 +0000
--- binutils/config.in 2014-10-31 11:59:05.021241036 +0000
***************
*** 18,23 ****
--- 18,26 ----
/* Should ar and ranlib use -D behavior by default? */
#undef DEFAULT_AR_DETERMINISTIC
+ /* Should strings use -a behavior by default? */
+ #undef DEFAULT_STRINGS_ALL
+
/* Define to 1 if translation of program messages to the user's native
language is requested. */
#undef ENABLE_NLS
diff -cpr ../binutils-2.24.orig/binutils/configure binutils/configure
*** ../binutils-2.24.orig/binutils/configure 2014-10-31 11:50:20.590223736 +0000
--- binutils/configure 2014-10-31 12:01:46.570102643 +0000
*************** with_gnu_ld
*** 772,777 ****
--- 772,778 ----
enable_libtool_lock
enable_targets
enable_deterministic_archives
+ enable_default_strings_all
enable_werror
enable_build_warnings
enable_nls
*************** Optional Features:
*** 1421,1426 ****
--- 1422,1429 ----
--enable-targets alternative target configurations
--enable-deterministic-archives
ar and ranlib default to -D behavior
+ --disable-default-strings-all
+ strings defaults to --data behavior
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings
--disable-nls do not use Native Language Support
*************** cat >>confdefs.h <<_ACEOF
*** 11615,11620 ****
--- 11594,11618 ----
_ACEOF
+ # Check whether --enable-default-strings-all was given.
+ if test "${enable_default_strings_all+set}" = set; then :
+ enableval=$enable_default_strings_all;
+ if test "${enableval}" = no; then
+ default_strings_all=0
+ else
+ default_strings_all=1
+ fi
+ else
+ default_strings_all=1
+ fi
+
+
+
+ cat >>confdefs.h <<_ACEOF
+ #define DEFAULT_STRINGS_ALL $default_strings_all
+ _ACEOF
+
+
GCC_WARN_CFLAGS="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
diff -cpr ../binutils-2.24.orig/binutils/configure.in binutils/configure.in
*** ../binutils-2.24.orig/binutils/configure.in 2014-10-31 11:50:20.430222717 +0000
--- binutils/configure.in 2014-10-31 12:00:48.092790946 +0000
*************** fi], [default_ar_deterministic=0])
*** 57,62 ****
--- 57,74 ----
AC_DEFINE_UNQUOTED(DEFAULT_AR_DETERMINISTIC, $default_ar_deterministic,
[Should ar and ranlib use -D behavior by default?])
+ AC_ARG_ENABLE(default-strings-all,
+ [AS_HELP_STRING([--disable-default-strings-all],
+ [strings defaults to --data behavior])], [
+ if test "${enableval}" = no; then
+ default_strings_all=0
+ else
+ default_strings_all=1
+ fi], [default_strings_all=1])
+
+ AC_DEFINE_UNQUOTED(DEFAULT_STRINGS_ALL, $default_strings_all,
+ [Should strings use -a behavior by default?])
+
AM_BINUTILS_WARNINGS
AC_CONFIG_HEADERS(config.h:config.in)
diff -cpr ../binutils-2.24.orig/binutils/doc/binutils.texi binutils/doc/binutils.texi
*** ../binutils-2.24.orig/binutils/doc/binutils.texi 2014-10-31 11:50:20.579223666 +0000
--- binutils/doc/binutils.texi 2014-10-31 11:59:23.052339164 +0000
*************** strings [@option{-afovV}] [@option{-}@va
*** 2653,2667 ****
@c man begin DESCRIPTION strings
! For each @var{file} given, @sc{gnu} @command{strings} prints the printable
! character sequences that are at least 4 characters long (or the number
! given with the options below) and are followed by an unprintable
! character. By default, it only prints the strings from the initialized
! and loaded sections of object files; for other types of files, it prints
! the strings from the whole file.
! @command{strings} is mainly useful for determining the contents of non-text
! files.
@c man end
--- 2653,2676 ----
@c man begin DESCRIPTION strings
! For each @var{file} given, @sc{gnu} @command{strings} prints the
! printable character sequences that are at least 4 characters long (or
! the number given with the options below) and are followed by an
! unprintable character.
!
! Depending upon how the strings program was configured it will default
! to either displaying all the printable sequences that it can find in
! each file, or only those sequences that are in loadable, initialized
! data sections. If the file type in unrecognizable, or if strings is
! reading from stdin then it will always display all of the printable
! sequences that it can find.
!
! For backwards compatibility any file that occurs after a command line
! option of just @option{-} will also be scanned in full, regardless of
! the presence of any @option{-d} option.
! @command{strings} is mainly useful for determining the contents of
! non-text files.
@c man end
*************** files.
*** 2671,2678 ****
@item -a
@itemx --all
@itemx -
! Do not scan only the initialized and loaded sections of object files;
! scan the whole files.
@item -f
@itemx --print-file-name
--- 2680,2704 ----
@item -a
@itemx --all
@itemx -
! Scan the whole file, regardless of what sections it contains or
! whether those sections are loaded or initialized. Normally this is
! the default behaviour, but strings can be configured so that the
! @option{-d} is the default instead.
!
! The @option{-} option is position dependent and forces strings to
! perform full scans of any file that is mentioned after the @option{-}
! on the command line, even if the @option{-d} option has been
! specified.
!
! @item -d
! @itemx --data
! Only print strings from initialized, loaded data sections in the
! file. This may reduce the amount of garbage in the output, but it
! also exposes the strings program to any security flaws that may be
! present in the BFD library used to scan and load sections. Strings
! can be configured so that this option is the default behaviour. In
! such cases the @option{-a} option can be used to avoid using the BFD
! library and instead just print all of the strings found in the file.
@item -f
@itemx --print-file-name
diff -cpr ../binutils-2.24.orig/binutils/NEWS binutils/NEWS
*** ../binutils-2.24.orig/binutils/NEWS 2014-10-31 11:50:20.338222131 +0000
--- binutils/NEWS 2014-10-31 11:59:52.315493579 +0000
***************
*** 1,5 ****
--- 1,10 ----
-*- text -*-
+ * Add --data option to strings to only print strings in loadable, initialized
+ data sections. Change the default behaviour to be --all, but add a new
+ configure time option of --disable-default-strings-all to restore the old
+ default behaviour.
+
Changes in 2.24:
* Objcopy now supports wildcard characters in command line options that take
diff -cpr ../binutils-2.24.orig/binutils/strings.c binutils/strings.c
*** ../binutils-2.24.orig/binutils/strings.c 2014-10-31 11:50:20.464222934 +0000
--- binutils/strings.c 2014-10-31 12:01:33.901035485 +0000
***************
*** 23,29 ****
Options:
--all
-a
! - Do not scan only the initialized data section of object files.
--print-file-name
-f Print the name of the file before each string.
--- 23,32 ----
Options:
--all
-a
! - Scan each file in its entirety.
!
! --data
! -d Scan only the initialized data section(s) of object files.
--print-file-name
-f Print the name of the file before each string.
*************** static int encoding_bytes;
*** 107,112 ****
--- 110,116 ----
static struct option long_options[] =
{
{"all", no_argument, NULL, 'a'},
+ {"data", no_argument, NULL, 'd'},
{"print-file-name", no_argument, NULL, 'f'},
{"bytes", required_argument, NULL, 'n'},
{"radix", required_argument, NULL, 't'},
*************** typedef struct
*** 128,134 ****
static void strings_a_section (bfd *, asection *, void *);
static bfd_boolean strings_object_file (const char *);
! static bfd_boolean strings_file (char *file);
static void print_strings (const char *, FILE *, file_ptr, int, int, char *);
static void usage (FILE *, int);
static long get_char (FILE *, file_ptr *, int *, char **);
--- 132,138 ----
static void strings_a_section (bfd *, asection *, void *);
static bfd_boolean strings_object_file (const char *);
! static bfd_boolean strings_file (char *);
static void print_strings (const char *, FILE *, file_ptr, int, int, char *);
static void usage (FILE *, int);
static long get_char (FILE *, file_ptr *, int *, char **);
*************** main (int argc, char **argv)
*** 158,168 ****
string_min = 4;
print_addresses = FALSE;
print_filenames = FALSE;
! datasection_only = TRUE;
target = NULL;
encoding = 's';
! while ((optc = getopt_long (argc, argv, "afhHn:ot:e:T:Vv0123456789",
long_options, (int *) 0)) != EOF)
{
switch (optc)
--- 162,175 ----
string_min = 4;
print_addresses = FALSE;
print_filenames = FALSE;
! if (DEFAULT_STRINGS_ALL)
! datasection_only = FALSE;
! else
! datasection_only = TRUE;
target = NULL;
encoding = 's';
! while ((optc = getopt_long (argc, argv, "adfhHn:ot:e:T:Vv0123456789",
long_options, (int *) 0)) != EOF)
{
switch (optc)
*************** main (int argc, char **argv)
*** 171,176 ****
--- 178,187 ----
datasection_only = FALSE;
break;
+ case 'd':
+ datasection_only = TRUE;
+ break;
+
case 'f':
print_filenames = TRUE;
break;
*************** usage (FILE *stream, int status)
*** 635,642 ****
{
fprintf (stream, _("Usage: %s [option(s)] [file(s)]\n"), program_name);
fprintf (stream, _(" Display printable strings in [file(s)] (stdin by default)\n"));
! fprintf (stream, _(" The options are:\n\
-a - --all Scan the entire file, not just the data section\n\
-f --print-file-name Print the name of the file before each string\n\
-n --bytes=[number] Locate & print any NUL-terminated sequence of at\n\
-<number> least [number] characters (default 4).\n\
--- 646,663 ----
{
fprintf (stream, _("Usage: %s [option(s)] [file(s)]\n"), program_name);
fprintf (stream, _(" Display printable strings in [file(s)] (stdin by default)\n"));
! fprintf (stream, _(" The options are:\n"));
!
! if (DEFAULT_STRINGS_ALL)
! fprintf (stream, _("\
! -a - --all Scan the entire file, not just the data section [default]\n\
! -d --data Only scan the data sections in the file\n"));
! else
! fprintf (stream, _("\
-a - --all Scan the entire file, not just the data section\n\
+ -d --data Only scan the data sections in the file [default]\n"));
+
+ fprintf (stream, _("\
-f --print-file-name Print the name of the file before each string\n\
-n --bytes=[number] Locate & print any NUL-terminated sequence of at\n\
-<number> least [number] characters (default 4).\n\
Only in binutils: strings.c.rej
Reference in a new issue View git blame Copy permalink