archlinuxarm/PKGBUILDs
1
0
Fork 0
mirror of https://github.com/archlinuxarm/PKGBUILDs.git synced 2024-11-08 22:45:43 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
PKGBUILDs/core/linux-kirkwood/archlinuxarm.patch
moonman 56e2e94e80 core/linux-kirkwood to 4.4.162-1
2018-10-27 19:27:44 -06:00

9319 lines
264 KiB
Diff
Raw Blame History

diff -ruN a/arch/arm/Kconfig b/arch/arm/Kconfig
--- a/arch/arm/Kconfig 2018-10-20 01:52:38.000000000 -0600
+++ b/arch/arm/Kconfig 2018-10-27 18:30:55.998359333 -0600
@@ -519,6 +519,21 @@
help
Support for the Marvell Dove SoC 88AP510
+config ARCH_KIRKWOOD
+ bool "Marvell Kirkwood"
+ select ARCH_REQUIRE_GPIOLIB
+ select CPU_FEROCEON
+ select GENERIC_CLOCKEVENTS
+ select MVEBU_MBUS
+ select PCI
+ select PCI_QUIRKS
+ select PINCTRL
+ select PINCTRL_KIRKWOOD
+ select PLAT_ORION_LEGACY
+ help
+ Support for the following Marvell Kirkwood series SoCs:
+ 88F6180, 88F6192 and 88F6281.
+
config ARCH_MV78XX0
bool "Marvell MV78xx0"
select ARCH_REQUIRE_GPIOLIB
@@ -854,6 +869,8 @@
source "arch/arm/mach-keystone/Kconfig"
+source "arch/arm/mach-kirkwood/Kconfig"
+
source "arch/arm/mach-ks8695/Kconfig"
source "arch/arm/mach-meson/Kconfig"
diff -ruN a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
--- a/arch/arm/Kconfig.debug 2018-10-20 01:52:38.000000000 -0600
+++ b/arch/arm/Kconfig.debug 2018-10-27 18:30:56.002359313 -0600
@@ -1360,7 +1360,7 @@
def_bool ARCH_DOVE || ARCH_EBSA110 || \
(FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
- ARCH_IOP33X || ARCH_IXP4XX || \
+ ARCH_IOP33X || ARCH_IXP4XX || ARCH_KIRKWOOD || \
ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
config DEBUG_UART_PHYS
@@ -1439,7 +1439,7 @@
default 0xf040ab00 if DEBUG_BRCMSTB_UART
default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
- default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \
+ default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
ARCH_ORION5X
default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8b00000 if DEBUG_HIX5HD2_UART
@@ -1540,6 +1540,7 @@
default 0xfec90000 if DEBUG_RK32_UART2
default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
+ default 0xfed12000 if ARCH_KIRKWOOD
default 0xfed60000 if DEBUG_RK29_UART0
default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
diff -ruN a/arch/arm/Makefile b/arch/arm/Makefile
--- a/arch/arm/Makefile 2018-10-20 01:52:38.000000000 -0600
+++ b/arch/arm/Makefile 2018-10-27 18:30:56.002359313 -0600
@@ -178,6 +178,7 @@
machine-$(CONFIG_ARCH_IOP33X) += iop33x
machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
machine-$(CONFIG_ARCH_KEYSTONE) += keystone
+machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood
machine-$(CONFIG_ARCH_KS8695) += ks8695
machine-$(CONFIG_ARCH_LPC18XX) += lpc18xx
machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
diff -ruN a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
--- a/arch/arm/mach-kirkwood/Kconfig 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/Kconfig 2018-10-27 18:30:56.002359313 -0600
@@ -0,0 +1,258 @@
+if ARCH_KIRKWOOD
+
+menu "Marvell Kirkwood Implementations"
+
+config KIRKWOOD_LEGACY
+ bool
+
+config MACH_D2NET_V2
+ bool "LaCie d2 Network v2 NAS Board"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie d2 Network v2 NAS.
+
+config MACH_DOCKSTAR
+ bool "Seagate FreeAgent DockStar"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ Seagate FreeAgent DockStar.
+
+config MACH_ESATA_SHEEVAPLUG
+ bool "Marvell eSATA SheevaPlug Reference Board"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell eSATA SheevaPlug Reference Board.
+
+config MACH_GURUPLUG
+ bool "Marvell GuruPlug Reference Board"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell GuruPlug Reference Board.
+
+config MACH_DREAMPLUG
+ bool "Marvell DreamPlug Reference Board"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell DreamPlug Reference Board.
+
+config MACH_INETSPACE_V2
+ bool "LaCie Internet Space v2 NAS Board"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie Internet Space v2 NAS.
+
+config MACH_MV88F6281GTW_GE
+ bool "Marvell 88F6281 GTW GE Board"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell 88F6281 GTW GE Board.
+
+config MACH_NET2BIG_V2
+ bool "LaCie 2Big Network v2 NAS Board"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie 2Big Network v2 NAS.
+
+config MACH_NET5BIG_V2
+ bool "LaCie 5Big Network v2 NAS Board"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie 5Big Network v2 NAS.
+
+config MACH_NETSPACE_MAX_V2
+ bool "LaCie Network Space Max v2 NAS Board"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie Network Space Max v2 NAS.
+
+config MACH_NETSPACE_V2
+ bool "LaCie Network Space v2 NAS Board"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie Network Space v2 NAS.
+
+config MACH_OPENRD
+ select KIRKWOOD_LEGACY
+ bool
+
+config MACH_OPENRD_BASE
+ bool "Marvell OpenRD Base Board"
+ select MACH_OPENRD
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell OpenRD Base Board.
+
+config MACH_OPENRD_CLIENT
+ bool "Marvell OpenRD Client Board"
+ select MACH_OPENRD
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell OpenRD Client Board.
+
+config MACH_OPENRD_ULTIMATE
+ bool "Marvell OpenRD Ultimate Board"
+ select MACH_OPENRD
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell OpenRD Ultimate Board.
+
+config MACH_BUBBA3
+ bool "Bubba3 miniserver"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ Bubba3 miniserver.
+
+config MACH_RD88F6192_NAS
+ bool "Marvell RD-88F6192-NAS Reference Board"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell RD-88F6192-NAS Reference Board.
+
+config MACH_RD88F6281
+ bool "Marvell RD-88F6281 Reference Board"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell RD-88F6281 Reference Board.
+
+config MACH_SHEEVAPLUG
+ bool "Marvell SheevaPlug Reference Board"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell SheevaPlug Reference Board.
+
+config MACH_T5325
+ bool "HP t5325 Thin Client"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ HP t5325 Thin Client.
+
+config MACH_TS219
+ bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
+ TS-219P+ Turbo NAS devices.
+
+config MACH_TS41X
+ bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
+ NAS devices.
+
+config MACH_GOFLEXNET
+ bool "Seagate GoFlex Net"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ Seagate GoFlex Net.
+
+config MACH_GOFLEXHOME
+ bool "Seagate GoFlex Home"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ Seagate GoFlex Home.
+
+config MACH_ICONNECT
+ bool "Iomega iConnect Wireless"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ Iomega iConnect Wireless.
+
+config MACH_POGOPLUGV4
+ bool "Pogoplug Series 4"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ Pogoplug Series 4.
+
+config MACH_POGO_E02
+ bool "CE Pogoplug E02"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ CloudEngines Pogoplug e02.
+
+config MACH_NAS6210
+ bool "RaidSonic ICY BOX IB-NAS6210"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ RaidSonic ICY BOX IB-NAS6210 device.
+
+config MACH_TOPKICK
+ bool "USI Topkick"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ USI Topkick.
+
+config MACH_IONICS_STRATUS
+ bool "Ionics Stratus"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ Ionics Stratus.
+
+config MACH_NSA310
+ bool "ZyXEL NSA310 1-Bay Power Media Server"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ ZyXEL NSA310.
+
+config MACH_NSA320
+ bool "ZyXEL NSA320 2-Bay Power Media Server"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ ZyXel NSA320.
+
+config MACH_NSA325
+ bool "ZyXEL NSA325 2-Bay Power Media Server"
+ select KIRKWOOD_LEGACY
+ help
+ Say 'Y' here if you want your kernel to support the
+ ZyXel NSA325.
+
+comment "Device tree entries"
+
+config ARCH_KIRKWOOD_DT
+ bool "Marvell Kirkwood Flattened Device Tree"
+ select KIRKWOOD_CLK
+ select OF_IRQ
+ select ORION_IRQCHIP
+ select ORION_TIMER
+ select POWER_SUPPLY
+ select POWER_RESET
+ select POWER_RESET_GPIO
+ select REGULATOR
+ select REGULATOR_FIXED_VOLTAGE
+ select USE_OF
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Kirkwood using flattened device tree.
+
+endmenu
+
+endif
diff -ruN a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
--- a/arch/arm/mach-kirkwood/Makefile 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/Makefile 2018-10-27 18:30:56.002359313 -0600
@@ -0,0 +1,35 @@
+obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o common.o pcie.o
+obj-$(CONFIG_PM) += pm.o
+
+obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
+obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
+obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
+obj-$(CONFIG_MACH_DREAMPLUG) += guruplug-setup.o
+obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
+obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
+obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
+obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
+obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
+obj-$(CONFIG_MACH_T5325) += t5325-setup.o
+obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
+obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
+obj-$(CONFIG_MACH_GOFLEXNET) += goflexnet-setup.o
+obj-$(CONFIG_MACH_GOFLEXHOME) += goflexhome-setup.o
+obj-$(CONFIG_MACH_ICONNECT) += iconnect-setup.o
+obj-$(CONFIG_MACH_POGOPLUGV4) += pogoplugv4-setup.o
+obj-$(CONFIG_MACH_POGO_E02) += pogo_e02-setup.o
+obj-$(CONFIG_MACH_NAS6210) += nas6210-setup.o
+obj-$(CONFIG_MACH_TOPKICK) += topkick-setup.o
+obj-$(CONFIG_MACH_IONICS_STRATUS) += ionics-stratus-setup.o
+obj-$(CONFIG_MACH_BUBBA3) += bubba3-setup.o bubba3-gpio.o
+obj-$(CONFIG_MACH_NSA310) += nsa310-setup.o
+obj-$(CONFIG_MACH_NSA320) += nsa320-setup.o
+obj-$(CONFIG_MACH_NSA325) += nsa325-setup.o
+
+obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
diff -ruN a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
--- a/arch/arm/mach-kirkwood/Makefile.boot 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/Makefile.boot 2018-10-27 18:30:56.002359313 -0600
@@ -0,0 +1,3 @@
+ zreladdr-y += 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff -ruN a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
--- a/arch/arm/mach-kirkwood/board-dt.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/board-dt.c 2018-10-27 18:30:56.002359313 -0600
@@ -0,0 +1,223 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-kirkwood/board-dt.c
+ *
+ * Flattened Device Tree board initialization
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+#include <linux/irqchip.h>
+#include <asm/hardware/cache-feroceon-l2.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/bridge-regs.h>
+#include <plat/common.h>
+#include <plat/pcie.h>
+#include "pm.h"
+
+static struct map_desc kirkwood_io_desc[] __initdata = {
+ {
+ .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
+ .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
+ .length = KIRKWOOD_REGS_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init kirkwood_map_io(void)
+{
+ iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
+}
+
+static struct resource kirkwood_cpufreq_resources[] = {
+ [0] = {
+ .start = CPU_CONTROL_PHYS,
+ .end = CPU_CONTROL_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device kirkwood_cpufreq_device = {
+ .name = "kirkwood-cpufreq",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources),
+ .resource = kirkwood_cpufreq_resources,
+};
+
+static void __init kirkwood_cpufreq_init(void)
+{
+ platform_device_register(&kirkwood_cpufreq_device);
+}
+
+static struct resource kirkwood_cpuidle_resource[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = DDR_OPERATION_BASE,
+ .end = DDR_OPERATION_BASE + 3,
+ },
+};
+
+static struct platform_device kirkwood_cpuidle = {
+ .name = "kirkwood_cpuidle",
+ .id = -1,
+ .resource = kirkwood_cpuidle_resource,
+ .num_resources = 1,
+};
+
+static void __init kirkwood_cpuidle_init(void)
+{
+ platform_device_register(&kirkwood_cpuidle);
+}
+
+/* Temporary here since mach-mvebu has a function we can use */
+static void kirkwood_restart(enum reboot_mode mode, const char *cmd)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
+#define MV643XX_ETH_MAC_ADDR_LOW 0x0414
+#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418
+
+static void __init kirkwood_dt_eth_fixup(void)
+{
+ struct device_node *np;
+
+ /*
+ * The ethernet interfaces forget the MAC address assigned by u-boot
+ * if the clocks are turned off. Usually, u-boot on kirkwood boards
+ * has no DT support to properly set local-mac-address property.
+ * As a workaround, we get the MAC address from mv643xx_eth registers
+ * and update the port device node if no valid MAC address is set.
+ */
+ for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
+ struct device_node *pnp = of_get_parent(np);
+ struct clk *clk;
+ struct property *pmac;
+ void __iomem *io;
+ u8 *macaddr;
+ u32 reg;
+
+ if (!pnp)
+ continue;
+
+ /* skip disabled nodes or nodes with valid MAC address*/
+ if (!of_device_is_available(pnp) || of_get_mac_address(np))
+ goto eth_fixup_skip;
+
+ clk = of_clk_get(pnp, 0);
+ if (IS_ERR(clk))
+ goto eth_fixup_skip;
+
+ io = of_iomap(pnp, 0);
+ if (!io)
+ goto eth_fixup_no_map;
+
+ /* ensure port clock is not gated to not hang CPU */
+ clk_prepare_enable(clk);
+
+ /* store MAC address register contents in local-mac-address */
+ pr_err(FW_INFO "%s: local-mac-address is not set\n",
+ np->full_name);
+
+ pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
+ if (!pmac)
+ goto eth_fixup_no_mem;
+
+ pmac->value = pmac + 1;
+ pmac->length = 6;
+ pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+ if (!pmac->name) {
+ kfree(pmac);
+ goto eth_fixup_no_mem;
+ }
+
+ macaddr = pmac->value;
+ reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
+ macaddr[0] = (reg >> 24) & 0xff;
+ macaddr[1] = (reg >> 16) & 0xff;
+ macaddr[2] = (reg >> 8) & 0xff;
+ macaddr[3] = reg & 0xff;
+
+ reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
+ macaddr[4] = (reg >> 8) & 0xff;
+ macaddr[5] = reg & 0xff;
+
+ of_update_property(np, pmac);
+
+eth_fixup_no_mem:
+ iounmap(io);
+ clk_disable_unprepare(clk);
+eth_fixup_no_map:
+ clk_put(clk);
+eth_fixup_skip:
+ of_node_put(pnp);
+ }
+}
+
+/*
+ * Disable propagation of mbus errors to the CPU local bus, as this
+ * causes mbus errors (which can occur for example for PCI aborts) to
+ * throw CPU aborts, which we're not set up to deal with.
+ */
+static void __init kirkwood_disable_mbus_error_propagation(void)
+{
+ void __iomem *cpu_config;
+
+ cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
+ writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
+ iounmap(cpu_config);
+}
+
+static void __init kirkwood_dt_init(void)
+{
+ kirkwood_disable_mbus_error_propagation();
+
+ BUG_ON(mvebu_mbus_dt_init(false));
+
+#ifdef CONFIG_CACHE_FEROCEON_L2
+ feroceon_of_init();
+#endif
+ kirkwood_cpufreq_init();
+ kirkwood_cpuidle_init();
+
+ kirkwood_pm_init();
+ kirkwood_dt_eth_fixup();
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const kirkwood_dt_board_compat[] = {
+ "marvell,kirkwood",
+ NULL
+};
+
+DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
+ /* Maintainer: Jason Cooper <jason@lakedaemon.net> */
+ .map_io = kirkwood_map_io,
+ .init_machine = kirkwood_dt_init,
+ .restart = kirkwood_restart,
+ .dt_compat = kirkwood_dt_board_compat,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/bubba3-gpio.c b/arch/arm/mach-kirkwood/bubba3-gpio.c
--- a/arch/arm/mach-kirkwood/bubba3-gpio.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/bubba3-gpio.c 2018-10-27 18:30:56.006359292 -0600
@@ -0,0 +1,392 @@
+/*
+ * Excito BUBBA|3 led driver.
+ *
+ * Copyright (C) 2010 Excito Elektronik i Skåne AB
+ * Author: "Tor Krill" <tor@excito.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This driver provides an interface to the GPIO functionality on BUBBA|3
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/bubba3.h>
+#include <asm/mach-types.h>
+
+/* Mark this file for ident */
+static char* ver="0.1";
+//static char* build=__DATE__ " " __TIME__;
+
+#define DEVNAME "bubbatwo"
+#define LED_DEFAULT_FREQ 0x8000
+
+/* Meta information for this module */
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Tor Krill <tor@excito.com>");
+MODULE_DESCRIPTION("BUBBA|3 led driver");
+
+/* Forwards */
+static int b3_probe(struct platform_device *dev);
+static int b3_remove(struct platform_device *dev);
+static void b3_led_on(void);
+
+#define MODE_OFF 0
+#define MODE_BLINK 1
+#define MODE_LIT 2
+#define BUZZ_OFF 0
+#define BUZZ_ON 1
+#define LED_BLUE 0
+#define LED_RED 1
+#define LED_GREEN 2
+#define LED_BOOT 3
+#define LED_INSTALL LED_GREEN
+
+struct b3_stateinfo{
+ u32 mode;
+ u32 freq;
+ u32 buzz;
+ u32 color;
+};
+
+static struct b3_stateinfo b3_data;
+
+static void b3_led_reset(void)
+{
+ gpio_set_value(B3_LED_INTERVAL,0);
+ udelay(1800);
+ gpio_set_value(B3_LED_INTERVAL,1);
+ udelay(10);
+ gpio_set_value(B3_LED_INTERVAL,0);
+ udelay(1800);
+}
+
+static void b3_led_train_start(void)
+{
+ gpio_set_value(B3_LED_INTERVAL,1);
+ udelay(10);
+ gpio_set_value(B3_LED_INTERVAL,0);
+ udelay(10);
+ gpio_set_value(B3_LED_INTERVAL,1);
+ udelay(10);
+ gpio_set_value(B3_LED_INTERVAL,0);
+ udelay(1800);
+}
+
+static void b3_led_train_end(void)
+{
+ gpio_set_value(B3_LED_INTERVAL,1);
+ udelay(10);
+ gpio_set_value(B3_LED_INTERVAL,0);
+ udelay(10);
+ gpio_set_value(B3_LED_INTERVAL,1);
+ udelay(10);
+ gpio_set_value(B3_LED_INTERVAL,0);
+ udelay(10);
+ gpio_set_value(B3_LED_INTERVAL,1);
+ udelay(10);
+ gpio_set_value(B3_LED_INTERVAL,0);
+ udelay(1800);
+}
+
+static void b3_led_color(u32 color){
+ gpio_set_value(B3_FRONT_LED_RED,0);
+ gpio_set_value(B3_FRONT_LED_BLUE,0);
+ gpio_set_value(B3_FRONT_LED_GREEN,0);
+
+ switch(color){
+ case LED_BOOT:
+ gpio_set_value(B3_FRONT_LED_RED,1);
+ gpio_set_value(B3_FRONT_LED_BLUE,1);
+ break;
+ case LED_RED:
+ gpio_set_value(B3_FRONT_LED_RED,1);
+ break;
+ case LED_GREEN:
+ gpio_set_value(B3_FRONT_LED_GREEN,1);
+ break;
+ case LED_BLUE:
+ default:
+ gpio_set_value(B3_FRONT_LED_BLUE,1);
+ break;
+ }
+}
+
+static void b3_led_on(void)
+{
+ b3_led_color(b3_data.color);
+
+ b3_led_reset();
+
+ b3_led_train_start();
+ /* NOOP, pass through mode */
+ b3_led_train_end();
+
+ gpio_set_value(B3_LED_INTERVAL,1);
+}
+
+static void b3_led_off(void)
+{
+ gpio_set_value(B3_FRONT_LED_RED,0);
+ gpio_set_value(B3_FRONT_LED_BLUE,0);
+ gpio_set_value(B3_FRONT_LED_GREEN,0);
+
+ b3_led_reset();
+}
+
+static void b3_buzz_on(void)
+{
+ gpio_set_value(B3_BUZZER_ENABLE,1);
+}
+
+static void b3_buzz_off(void)
+{
+ gpio_set_value(B3_BUZZER_ENABLE,0);
+}
+
+
+static struct platform_device *b3_device;
+
+static struct platform_driver b3_driver = {
+ .driver = {
+ .name = DEVNAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = b3_probe,
+ .remove = b3_remove,
+};
+
+static ssize_t b3_show_ledmode(struct device *dev, struct device_attribute *attr, char *buffer)
+{
+ ssize_t len = 0;
+ switch(b3_data.mode){
+ case MODE_OFF:
+ len = sprintf (buffer+len, "off");
+ break;
+ case MODE_BLINK:
+ len = sprintf (buffer+len, "blink");
+ break;
+ case MODE_LIT:
+ len = sprintf (buffer+len, "lit");
+ break;
+ default:
+ len = sprintf (buffer+len, "unknown");
+ }
+
+ return len;
+}
+
+static ssize_t b3_store_ledmode(struct device *dev, struct device_attribute *attr,const char *buffer, size_t size)
+{
+
+ if(size<1){
+ return -EINVAL;
+ }
+ /* Do a nasty shortcut here only look at first char */
+ switch(buffer[0]){
+ case 'o':
+ b3_data.mode=MODE_OFF;
+ b3_led_off ();
+ break;
+ case 'b':
+ /* For now we dont allow blink. */
+ case 'l':
+ b3_data.mode=MODE_LIT;
+ b3_led_on ();
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return size;
+}
+
+static ssize_t b3_show_ledfreq(struct device *dev, struct device_attribute *attr, char *buffer)
+{
+ ssize_t len = 0;
+
+ len = sprintf (buffer+len, "%u", b3_data.freq);
+
+ return len;
+}
+
+static ssize_t b3_store_ledfreq(struct device *dev, struct device_attribute *attr,const char *buffer, size_t size)
+{
+
+ b3_data.freq = simple_strtoul(buffer,NULL,0);
+
+ return size;
+}
+
+static ssize_t b3_show_buzzer(struct device *dev, struct device_attribute *attr, char *buffer)
+{
+ ssize_t len = 0;
+
+ len = sprintf (buffer+len, "%u", b3_data.buzz);
+
+ return len;
+}
+
+static ssize_t b3_store_buzzer(struct device *dev, struct device_attribute *attr,const char *buffer, size_t size)
+{
+
+ b3_data.buzz = simple_strtoul(buffer,NULL,0);
+
+ b3_data.buzz = (b3_data.buzz>0) ? BUZZ_ON : BUZZ_OFF;
+
+ if(b3_data.buzz==BUZZ_ON){
+ b3_buzz_on();
+ }else{
+ b3_buzz_off();
+ }
+
+ return size;
+}
+
+static ssize_t b3_show_color(struct device *dev, struct device_attribute *attr, char *buffer)
+{
+ ssize_t len = 0;
+
+ len = sprintf (buffer+len, "%u", b3_data.color);
+
+ return len;
+}
+
+static ssize_t b3_store_color(struct device *dev, struct device_attribute *attr,const char *buffer, size_t size)
+{
+
+ b3_data.color = simple_strtoul(buffer,NULL,0);
+
+ b3_data.color = (b3_data.color>LED_BOOT) ? LED_BOOT : b3_data.color;
+
+ b3_led_color(b3_data.color);
+
+ return size;
+}
+
+static struct gpio bubba_gpios[] = {
+#ifdef CONFIG_BUBBA3_INSTALL
+ { B3_FRONT_LED_RED, GPIOF_OUT_INIT_LOW, "Red LED"},
+ { B3_FRONT_LED_BLUE, GPIOF_OUT_INIT_LOW, "Blue LED"},
+ { B3_FRONT_LED_GREEN, GPIOF_OUT_INIT_HIGH, "Green LED"},
+#else
+ { B3_FRONT_LED_RED, GPIOF_OUT_INIT_HIGH, "Red LED"},
+ { B3_FRONT_LED_BLUE, GPIOF_OUT_INIT_HIGH, "Blue LED"},
+ { B3_FRONT_LED_GREEN, GPIOF_OUT_INIT_LOW, "Green LED"},
+#endif
+ { B3_LED_INTERVAL, GPIOF_OUT_INIT_HIGH, "LED interval"},
+ { B3_BUZZER_ENABLE, GPIOF_OUT_INIT_LOW, "Buzzer"}
+};
+
+static int request_ioresources(void)
+{
+
+ if(gpio_request_array(bubba_gpios, ARRAY_SIZE(bubba_gpios))<0){
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+DEVICE_ATTR(ledmode, 0644, b3_show_ledmode, b3_store_ledmode);
+DEVICE_ATTR(ledfreq, 0644, b3_show_ledfreq, b3_store_ledfreq);
+DEVICE_ATTR(buzzer, 0644, b3_show_buzzer, b3_store_buzzer);
+DEVICE_ATTR(color, 0644, b3_show_color, b3_store_color);
+
+static int b3_probe(struct platform_device *dev)
+{
+ int ret=0;
+
+ if(request_ioresources()){
+ return -EINVAL;
+ }
+
+ ret = device_create_file(&b3_device->dev, &dev_attr_ledmode);
+ if(ret){
+ return -EINVAL;
+ }
+
+ ret = device_create_file(&b3_device->dev, &dev_attr_ledfreq);
+ if(ret){
+ device_remove_file(&b3_device->dev, &dev_attr_ledmode);
+ return -EINVAL;
+ }
+
+ ret = device_create_file(&b3_device->dev, &dev_attr_buzzer);
+ if(ret){
+ device_remove_file(&b3_device->dev, &dev_attr_ledfreq);
+ device_remove_file(&b3_device->dev, &dev_attr_ledmode);
+ return -EINVAL;
+ }
+
+ ret = device_create_file(&b3_device->dev, &dev_attr_color);
+ if(ret){
+ device_remove_file(&b3_device->dev, &dev_attr_buzzer);
+ device_remove_file(&b3_device->dev, &dev_attr_ledfreq);
+ device_remove_file(&b3_device->dev, &dev_attr_ledmode);
+ return -EINVAL;
+ }
+
+ b3_data.mode = MODE_LIT;
+ b3_data.freq = LED_DEFAULT_FREQ;
+ b3_data.buzz = BUZZ_OFF;
+#ifdef CONFIG_BUBBA3_INSTALL
+ b3_data.color = LED_INSTALL;
+#else
+ b3_data.color = LED_BOOT;
+#endif
+ return ret;
+}
+
+static int b3_remove(struct platform_device *dev)
+{
+
+ device_remove_file (&b3_device->dev, &dev_attr_ledmode);
+ device_remove_file (&b3_device->dev, &dev_attr_ledfreq);
+ device_remove_file(&b3_device->dev, &dev_attr_buzzer);
+ device_remove_file(&b3_device->dev, &dev_attr_color);
+
+ gpio_free_array(bubba_gpios, ARRAY_SIZE(bubba_gpios));
+ return 0;
+}
+
+static int __init bubba3_init(void){
+ int result;
+
+ if(!machine_is_bubba3()){
+ return -EINVAL;
+ }
+
+
+ result = platform_driver_register(&b3_driver);
+ if (result < 0) {
+ printk(KERN_ERR "bubba3: Failed to register driver\n");
+ return result;
+ }
+
+ b3_device = platform_device_alloc(DEVNAME,-1);
+ platform_device_add(b3_device);
+
+ printk(KERN_INFO "BUBBA3: driver ver %s loaded\n",ver);
+
+ return result;
+
+}
+
+static void __exit bubba3_cleanup(void){
+
+ platform_device_del(b3_device);
+ platform_driver_unregister(&b3_driver);
+
+ printk(KERN_INFO "bubba3 driver removed\n");
+
+}
+/* register init and cleanup functions */
+module_init(bubba3_init);
+module_exit(bubba3_cleanup);
diff -ruN a/arch/arm/mach-kirkwood/bubba3-setup.c b/arch/arm/mach-kirkwood/bubba3-setup.c
--- a/arch/arm/mach-kirkwood/bubba3-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/bubba3-setup.c 2018-10-27 18:30:56.006359292 -0600
@@ -0,0 +1,234 @@
+/*
+ * arch/arm/mach-kirkwood/bubba3-setup.c
+ * based on
+ * arch/arm/mach-kirkwood/rd88f6281-setup.c
+ *
+ * For Bubba3 miniserver from Excito
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/bubba3.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/kirkwood.h>
+#include <plat/orion-gpio.h>
+#include <mach/bridge-regs.h>
+#include <plat/time.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * 2048KB SPI Flash on Boot Device (Numonyx MP25P16)
+ ****************************************************************************/
+
+static struct mtd_partition bubba3_flash_parts[] = {
+ {
+ .name = "u-boot",
+ .size = SZ_512K+SZ_256K,
+ .offset = 0,
+ },
+ {
+ .name = "env",
+ .size = SZ_128K,
+ .offset = MTDPART_OFS_NXTBLK,
+ },
+ {
+ .name = "data",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_NXTBLK,
+ },
+};
+
+static const struct flash_platform_data bubba3_flash = {
+ .type = "m25p16",
+ .name = "spi_flash",
+ .parts = bubba3_flash_parts,
+ .nr_parts = ARRAY_SIZE(bubba3_flash_parts),
+};
+
+static struct spi_board_info __initdata bubba3_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &bubba3_flash,
+ .irq = -1,
+ .max_speed_hz = 40000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+/*****************************************************************************
+ * GPIO and keys
+ ****************************************************************************/
+
+static struct gpio_keys_button bubba3_buttons[] = {
+ [0] = {
+ .code = KEY_POWER,
+ .gpio = B3_POWER_BUTTON,
+ .desc = "Power button",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data bubba3_button_data = {
+ .buttons = bubba3_buttons,
+ .nbuttons = ARRAY_SIZE(bubba3_buttons),
+};
+
+static struct platform_device bubba3_gpio_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &bubba3_button_data,
+ },
+};
+
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data bubba3_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0x08),
+ /* in case a hardcoded MAC address is needed uncomment next line */
+ /* .mac_addr = {0x00, 0x0c, 0xc6, 0x76, 0x76, 0x2b}, */
+};
+
+static struct mv643xx_eth_platform_data bubba3_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0x18),
+ /* in case a hardcoded MAC address is needed uncomment next line */
+ /* .mac_addr = {0x00, 0x0c, 0xc6, 0x76, 0x76, 0x2c}, */
+};
+
+static struct mv_sata_platform_data bubba3_sata_data = {
+ .n_ports = 2,
+};
+
+/*****************************************************************************
+ * Timer
+ ****************************************************************************/
+
+static unsigned int bubba3_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP7_PEX_RST_OUTn,
+ MPP8_TW0_SDA,
+ MPP9_TW0_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_GPO,
+ MPP13_UART1_TXD,
+ MPP14_UART1_RXD,
+ MPP15_SATA0_ACTn,
+ MPP16_SATA1_ACTn,
+ MPP17_SATA0_PRESENTn,
+ MPP18_GPO,
+ MPP19_GPO,
+ MPP20_GE1_TXD0,
+ MPP21_GE1_TXD1,
+ MPP22_GE1_TXD2,
+ MPP23_GE1_TXD3,
+ MPP24_GE1_RXD0,
+ MPP25_GE1_RXD1,
+ MPP26_GE1_RXD2,
+ MPP27_GE1_RXD3,
+ MPP28_GPIO,
+ MPP29_GPIO,
+ MPP30_GE1_RXCTL,
+ MPP31_GE1_RXCLK,
+ MPP32_GE1_TCLKOUT,
+ MPP33_GE1_TXCTL,
+ MPP34_GPIO,
+ MPP35_GPIO,
+ MPP36_GPIO,
+ MPP37_GPIO,
+ MPP38_GPIO,
+ MPP39_GPIO,
+ MPP40_GPIO,
+ MPP41_GPIO,
+ MPP42_GPIO,
+ MPP43_GPIO,
+ MPP44_GPIO,
+ MPP45_GPIO,
+ MPP46_GPIO,
+ MPP47_GPIO,
+ MPP48_GPIO,
+ MPP49_GPIO,
+ 0
+};
+
+static void __init bubba3_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ kirkwood_mpp_conf(bubba3_mpp_config);
+
+ kirkwood_uart0_init();
+
+ spi_register_board_info(bubba3_spi_slave_info,
+ ARRAY_SIZE(bubba3_spi_slave_info));
+ kirkwood_spi_init();
+
+ kirkwood_i2c_init();
+
+ platform_device_register(&bubba3_gpio_buttons);
+
+ /* eth0 */
+ kirkwood_ge00_init(&bubba3_ge00_data);
+
+ /* eth1 */
+ if (gpio_request(28, "PHY2 reset") != 0 ||
+ gpio_direction_input(28) != 0) // high-z
+ printk(KERN_ERR "can't deassert GPIO 28 (PHY2 reset)\n");
+ else
+ kirkwood_ge01_init(&bubba3_ge01_data);
+
+ kirkwood_sata_init(&bubba3_sata_data);
+
+ kirkwood_ehci_init();
+
+}
+
+static int __init bubba3_pci_init(void)
+{
+ if (machine_is_bubba3())
+ kirkwood_pcie_init( KW_PCIE0 | KW_PCIE1 );
+
+ return 0;
+}
+subsys_initcall(bubba3_pci_init);
+
+MACHINE_START(BUBBA3, "BUBBA3 Kirkwood based miniserver")
+ /* Maintainer: Tor Krill <tor@excito.com> */
+ .atag_offset = 0x100,
+ .init_machine = bubba3_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
--- a/arch/arm/mach-kirkwood/common.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/common.c 2018-10-27 18:30:56.006359292 -0600
@@ -0,0 +1,747 @@
+/*
+ * arch/arm/mach-kirkwood/common.c
+ *
+ * Core functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/nand.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+#include <linux/mv643xx_i2c.h>
+#include <linux/timex.h>
+#include <linux/kexec.h>
+#include <linux/reboot.h>
+#include <net/dsa.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/cache-feroceon-l2.h>
+#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
+#include <linux/platform_data/asoc-kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <plat/common.h>
+#include <plat/time.h>
+#include <linux/clk.h>
+#include <linux/platform_data/dma-mv_xor.h>
+#include "common.h"
+#include "pm.h"
+
+/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
+#define KIRKWOOD_MBUS_NAND_TARGET 0x01
+#define KIRKWOOD_MBUS_NAND_ATTR 0x2f
+#define KIRKWOOD_MBUS_SRAM_TARGET 0x03
+#define KIRKWOOD_MBUS_SRAM_ATTR 0x01
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc kirkwood_io_desc[] __initdata = {
+ {
+ .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
+ .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
+ .length = KIRKWOOD_REGS_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init kirkwood_map_io(void)
+{
+ iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
+}
+
+/*****************************************************************************
+ * CLK tree
+ ****************************************************************************/
+
+static void enable_sata0(void)
+{
+ /* Enable PLL and IVREF */
+ writel(readl(SATA0_PHY_MODE_2) | 0xf, SATA0_PHY_MODE_2);
+ /* Enable PHY */
+ writel(readl(SATA0_IF_CTRL) & ~0x200, SATA0_IF_CTRL);
+}
+
+static void disable_sata0(void)
+{
+ /* Disable PLL and IVREF */
+ writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
+ /* Disable PHY */
+ writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
+}
+
+static void enable_sata1(void)
+{
+ /* Enable PLL and IVREF */
+ writel(readl(SATA1_PHY_MODE_2) | 0xf, SATA1_PHY_MODE_2);
+ /* Enable PHY */
+ writel(readl(SATA1_IF_CTRL) & ~0x200, SATA1_IF_CTRL);
+}
+
+static void disable_sata1(void)
+{
+ /* Disable PLL and IVREF */
+ writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
+ /* Disable PHY */
+ writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
+}
+
+static void disable_pcie0(void)
+{
+ writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
+ while (1)
+ if (readl(PCIE_STATUS) & 0x1)
+ break;
+ writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
+}
+
+static void disable_pcie1(void)
+{
+ u32 dev, rev;
+
+ kirkwood_pcie_id(&dev, &rev);
+
+ if (dev == MV88F6282_DEV_ID) {
+ writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL);
+ while (1)
+ if (readl(PCIE1_STATUS) & 0x1)
+ break;
+ writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL);
+ }
+}
+
+/* An extended version of the gated clk. This calls fn_en()/fn_dis
+ * before enabling/disabling the clock. We use this to turn on/off
+ * PHYs etc. */
+struct clk_gate_fn {
+ struct clk_gate gate;
+ void (*fn_en)(void);
+ void (*fn_dis)(void);
+};
+
+#define to_clk_gate_fn(_gate) container_of(_gate, struct clk_gate_fn, gate)
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+
+static int clk_gate_fn_enable(struct clk_hw *hw)
+{
+ struct clk_gate *gate = to_clk_gate(hw);
+ struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate);
+ int ret;
+
+ ret = clk_gate_ops.enable(hw);
+ if (!ret && gate_fn->fn_en)
+ gate_fn->fn_en();
+
+ return ret;
+}
+
+static void clk_gate_fn_disable(struct clk_hw *hw)
+{
+ struct clk_gate *gate = to_clk_gate(hw);
+ struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate);
+
+ if (gate_fn->fn_dis)
+ gate_fn->fn_dis();
+
+ clk_gate_ops.disable(hw);
+}
+
+static struct clk_ops clk_gate_fn_ops;
+
+static struct clk __init *clk_register_gate_fn(struct device *dev,
+ const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx,
+ u8 clk_gate_flags, spinlock_t *lock,
+ void (*fn_en)(void), void (*fn_dis)(void))
+{
+ struct clk_gate_fn *gate_fn;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ gate_fn = kzalloc(sizeof(struct clk_gate_fn), GFP_KERNEL);
+ if (!gate_fn) {
+ pr_err("%s: could not allocate gated clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.ops = &clk_gate_fn_ops;
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ /* struct clk_gate assignments */
+ gate_fn->gate.reg = reg;
+ gate_fn->gate.bit_idx = bit_idx;
+ gate_fn->gate.flags = clk_gate_flags;
+ gate_fn->gate.lock = lock;
+ gate_fn->gate.hw.init = &init;
+ gate_fn->fn_en = fn_en;
+ gate_fn->fn_dis = fn_dis;
+
+ /* ops is the gate ops, but with our enable/disable functions */
+ if (clk_gate_fn_ops.enable != clk_gate_fn_enable ||
+ clk_gate_fn_ops.disable != clk_gate_fn_disable) {
+ clk_gate_fn_ops = clk_gate_ops;
+ clk_gate_fn_ops.enable = clk_gate_fn_enable;
+ clk_gate_fn_ops.disable = clk_gate_fn_disable;
+ }
+
+ clk = clk_register(dev, &gate_fn->gate.hw);
+
+ if (IS_ERR(clk))
+ kfree(gate_fn);
+
+ return clk;
+}
+
+static DEFINE_SPINLOCK(gating_lock);
+static struct clk *tclk;
+
+static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
+{
+ return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
+ bit_idx, 0, &gating_lock);
+}
+
+static struct clk __init *kirkwood_register_gate_fn(const char *name,
+ u8 bit_idx,
+ void (*fn_en)(void),
+ void (*fn_dis)(void))
+{
+ return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
+ bit_idx, 0, &gating_lock, fn_en, fn_dis);
+}
+
+static struct clk *ge0, *ge1;
+
+void __init kirkwood_clk_init(void)
+{
+ struct clk *runit, *sata0, *sata1, *usb0, *sdio;
+ struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio;
+
+ tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
+ CLK_IS_ROOT, kirkwood_tclk);
+
+ runit = kirkwood_register_gate("runit", CGC_BIT_RUNIT);
+ ge0 = kirkwood_register_gate("ge0", CGC_BIT_GE0);
+ ge1 = kirkwood_register_gate("ge1", CGC_BIT_GE1);
+ sata0 = kirkwood_register_gate_fn("sata0", CGC_BIT_SATA0,
+ enable_sata0, disable_sata0);
+ sata1 = kirkwood_register_gate_fn("sata1", CGC_BIT_SATA1,
+ enable_sata1, disable_sata1);
+ usb0 = kirkwood_register_gate("usb0", CGC_BIT_USB0);
+ sdio = kirkwood_register_gate("sdio", CGC_BIT_SDIO);
+ crypto = kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
+ xor0 = kirkwood_register_gate("xor0", CGC_BIT_XOR0);
+ xor1 = kirkwood_register_gate("xor1", CGC_BIT_XOR1);
+ pex0 = kirkwood_register_gate_fn("pex0", CGC_BIT_PEX0,
+ NULL, disable_pcie0);
+ pex1 = kirkwood_register_gate_fn("pex1", CGC_BIT_PEX1,
+ NULL, disable_pcie1);
+ audio = kirkwood_register_gate("audio", CGC_BIT_AUDIO);
+ kirkwood_register_gate("tdm", CGC_BIT_TDM);
+ kirkwood_register_gate("tsu", CGC_BIT_TSU);
+
+ /* clkdev entries, mapping clks to devices */
+ orion_clkdev_add(NULL, "orion_spi.0", runit);
+ orion_clkdev_add(NULL, "orion_spi.1", runit);
+ orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", ge0);
+ orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", ge1);
+ orion_clkdev_add(NULL, "orion_wdt", tclk);
+ orion_clkdev_add("0", "sata_mv.0", sata0);
+ orion_clkdev_add("1", "sata_mv.0", sata1);
+ orion_clkdev_add(NULL, "orion-ehci.0", usb0);
+ orion_clkdev_add(NULL, "orion_nand", runit);
+ orion_clkdev_add(NULL, "mvsdio", sdio);
+ orion_clkdev_add(NULL, "mv_crypto", crypto);
+ orion_clkdev_add(NULL, MV_XOR_NAME ".0", xor0);
+ orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1);
+ orion_clkdev_add("0", "pcie", pex0);
+ orion_clkdev_add("1", "pcie", pex1);
+ orion_clkdev_add(NULL, "mvebu-audio", audio);
+ orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit);
+ orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit);
+
+ /* Marvell says runit is used by SPI, UART, NAND, TWSI, ...,
+ * so should never be gated.
+ */
+ clk_prepare_enable(runit);
+}
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+void __init kirkwood_ehci_init(void)
+{
+ orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA);
+}
+
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+ orion_ge00_init(eth_data,
+ GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
+ IRQ_KIRKWOOD_GE00_ERR, 1600);
+ /* The interface forgets the MAC address assigned by u-boot if
+ the clock is turned off, so claim the clk now. */
+ clk_prepare_enable(ge0);
+}
+
+
+/*****************************************************************************
+ * GE01
+ ****************************************************************************/
+void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
+{
+ orion_ge01_init(eth_data,
+ GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
+ IRQ_KIRKWOOD_GE01_ERR, 1600);
+ clk_prepare_enable(ge1);
+}
+
+
+/*****************************************************************************
+ * Ethernet switch
+ ****************************************************************************/
+void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
+{
+ orion_ge00_switch_init(d, irq);
+}
+
+
+/*****************************************************************************
+ * NAND flash
+ ****************************************************************************/
+static struct resource kirkwood_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
+ .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
+ KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data kirkwood_nand_data = {
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+};
+
+static struct platform_device kirkwood_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &kirkwood_nand_data,
+ },
+ .resource = &kirkwood_nand_resource,
+ .num_resources = 1,
+};
+
+void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
+ int chip_delay)
+{
+ kirkwood_nand_data.parts = parts;
+ kirkwood_nand_data.nr_parts = nr_parts;
+ kirkwood_nand_data.chip_delay = chip_delay;
+ platform_device_register(&kirkwood_nand_flash);
+}
+
+void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
+ int (*dev_ready)(struct mtd_info *))
+{
+ kirkwood_nand_data.parts = parts;
+ kirkwood_nand_data.nr_parts = nr_parts;
+ kirkwood_nand_data.dev_ready = dev_ready;
+ platform_device_register(&kirkwood_nand_flash);
+}
+
+/*****************************************************************************
+ * SoC RTC
+ ****************************************************************************/
+static void __init kirkwood_rtc_init(void)
+{
+ orion_rtc_init(RTC_PHYS_BASE, IRQ_KIRKWOOD_RTC);
+}
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
+{
+ orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA);
+}
+
+
+/*****************************************************************************
+ * SD/SDIO/MMC
+ ****************************************************************************/
+static struct resource mvsdio_resources[] = {
+ [0] = {
+ .start = SDIO_PHYS_BASE,
+ .end = SDIO_PHYS_BASE + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_KIRKWOOD_SDIO,
+ .end = IRQ_KIRKWOOD_SDIO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 mvsdio_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device kirkwood_sdio = {
+ .name = "mvsdio",
+ .id = -1,
+ .dev = {
+ .dma_mask = &mvsdio_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(mvsdio_resources),
+ .resource = mvsdio_resources,
+};
+
+void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
+{
+ u32 dev, rev;
+
+ kirkwood_pcie_id(&dev, &rev);
+ if (rev == 0 && dev != MV88F6282_DEV_ID) /* catch all Kirkwood Z0's */
+ mvsdio_data->clock = 100000000;
+ else
+ mvsdio_data->clock = 200000000;
+ kirkwood_sdio.dev.platform_data = mvsdio_data;
+ platform_device_register(&kirkwood_sdio);
+}
+
+
+/*****************************************************************************
+ * SPI
+ ****************************************************************************/
+void __init kirkwood_spi_init(void)
+{
+ orion_spi_init(SPI_PHYS_BASE);
+}
+
+
+/*****************************************************************************
+ * I2C
+ ****************************************************************************/
+void __init kirkwood_i2c_init(void)
+{
+ orion_i2c_init(I2C_PHYS_BASE, IRQ_KIRKWOOD_TWSI, 8);
+}
+
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+
+void __init kirkwood_uart0_init(void)
+{
+ orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
+ IRQ_KIRKWOOD_UART_0, tclk);
+}
+
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+void __init kirkwood_uart1_init(void)
+{
+ orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
+ IRQ_KIRKWOOD_UART_1, tclk);
+}
+
+/*****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+ ****************************************************************************/
+void __init kirkwood_crypto_init(void)
+{
+ orion_crypto_init(CRYPTO_PHYS_BASE, KIRKWOOD_SRAM_PHYS_BASE,
+ KIRKWOOD_SRAM_SIZE, IRQ_KIRKWOOD_CRYPTO);
+}
+
+
+/*****************************************************************************
+ * XOR0
+ ****************************************************************************/
+void __init kirkwood_xor0_init(void)
+{
+ orion_xor0_init(XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE,
+ IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01);
+}
+
+
+/*****************************************************************************
+ * XOR1
+ ****************************************************************************/
+void __init kirkwood_xor1_init(void)
+{
+ orion_xor1_init(XOR1_PHYS_BASE, XOR1_HIGH_PHYS_BASE,
+ IRQ_KIRKWOOD_XOR_10, IRQ_KIRKWOOD_XOR_11);
+}
+
+
+/*****************************************************************************
+ * Watchdog
+ ****************************************************************************/
+void __init kirkwood_wdt_init(void)
+{
+ orion_wdt_init();
+}
+
+/*****************************************************************************
+ * CPU idle
+ ****************************************************************************/
+static struct resource kirkwood_cpuidle_resource[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = DDR_OPERATION_BASE,
+ .end = DDR_OPERATION_BASE + 3,
+ },
+};
+
+static struct platform_device kirkwood_cpuidle = {
+ .name = "kirkwood_cpuidle",
+ .id = -1,
+ .resource = kirkwood_cpuidle_resource,
+ .num_resources = 1,
+};
+
+void __init kirkwood_cpuidle_init(void)
+{
+ platform_device_register(&kirkwood_cpuidle);
+}
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+void __init kirkwood_init_early(void)
+{
+ orion_time_set_base(TIMER_VIRT_BASE);
+}
+
+int kirkwood_tclk;
+
+static int __init kirkwood_find_tclk(void)
+{
+ u32 dev, rev;
+
+ kirkwood_pcie_id(&dev, &rev);
+
+ if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID)
+ if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0)
+ return 200000000;
+
+ return 166666667;
+}
+
+void __init kirkwood_timer_init(void)
+{
+ kirkwood_tclk = kirkwood_find_tclk();
+
+ orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
+ IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
+}
+
+/*****************************************************************************
+ * Audio
+ ****************************************************************************/
+static struct resource kirkwood_audio_resources[] = {
+ [0] = {
+ .start = AUDIO_PHYS_BASE,
+ .end = AUDIO_PHYS_BASE + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_KIRKWOOD_I2S,
+ .end = IRQ_KIRKWOOD_I2S,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct kirkwood_asoc_platform_data kirkwood_audio_data = {
+ .burst = 128,
+};
+
+static struct platform_device kirkwood_audio_device = {
+ .name = "mvebu-audio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(kirkwood_audio_resources),
+ .resource = kirkwood_audio_resources,
+ .dev = {
+ .platform_data = &kirkwood_audio_data,
+ },
+};
+
+void __init kirkwood_audio_init(void)
+{
+ platform_device_register(&kirkwood_audio_device);
+}
+
+/*****************************************************************************
+ * CPU Frequency
+ ****************************************************************************/
+static struct resource kirkwood_cpufreq_resources[] = {
+ [0] = {
+ .start = CPU_CONTROL_PHYS,
+ .end = CPU_CONTROL_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device kirkwood_cpufreq_device = {
+ .name = "kirkwood-cpufreq",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources),
+ .resource = kirkwood_cpufreq_resources,
+};
+
+void __init kirkwood_cpufreq_init(void)
+{
+ platform_device_register(&kirkwood_cpufreq_device);
+}
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+/*
+ * Identify device ID and revision.
+ */
+char * __init kirkwood_id(void)
+{
+ u32 dev, rev;
+
+ kirkwood_pcie_id(&dev, &rev);
+
+ if (dev == MV88F6281_DEV_ID) {
+ if (rev == MV88F6281_REV_Z0)
+ return "MV88F6281-Z0";
+ else if (rev == MV88F6281_REV_A0)
+ return "MV88F6281-A0";
+ else if (rev == MV88F6281_REV_A1)
+ return "MV88F6281-A1";
+ else
+ return "MV88F6281-Rev-Unsupported";
+ } else if (dev == MV88F6192_DEV_ID) {
+ if (rev == MV88F6192_REV_Z0)
+ return "MV88F6192-Z0";
+ else if (rev == MV88F6192_REV_A0)
+ return "MV88F6192-A0";
+ else if (rev == MV88F6192_REV_A1)
+ return "MV88F6192-A1";
+ else
+ return "MV88F6192-Rev-Unsupported";
+ } else if (dev == MV88F6180_DEV_ID) {
+ if (rev == MV88F6180_REV_A0)
+ return "MV88F6180-Rev-A0";
+ else if (rev == MV88F6180_REV_A1)
+ return "MV88F6180-Rev-A1";
+ else
+ return "MV88F6180-Rev-Unsupported";
+ } else if (dev == MV88F6282_DEV_ID) {
+ if (rev == MV88F6282_REV_A0)
+ return "MV88F6282-Rev-A0";
+ else if (rev == MV88F6282_REV_A1)
+ return "MV88F6282-Rev-A1";
+ else
+ return "MV88F6282-Rev-Unsupported";
+ } else {
+ return "Device-Unknown";
+ }
+}
+
+void __init kirkwood_setup_wins(void)
+{
+ mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_NAND_TARGET,
+ KIRKWOOD_MBUS_NAND_ATTR,
+ KIRKWOOD_NAND_MEM_PHYS_BASE,
+ KIRKWOOD_NAND_MEM_SIZE);
+ mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_SRAM_TARGET,
+ KIRKWOOD_MBUS_SRAM_ATTR,
+ KIRKWOOD_SRAM_PHYS_BASE,
+ KIRKWOOD_SRAM_SIZE);
+}
+
+void __init kirkwood_l2_init(void)
+{
+#ifdef CONFIG_CACHE_FEROCEON_L2
+#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
+ writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
+ feroceon_l2_init(1);
+#else
+ writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
+ feroceon_l2_init(0);
+#endif
+#endif
+}
+
+void __init kirkwood_init(void)
+{
+ pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
+
+ /*
+ * Disable propagation of mbus errors to the CPU local bus,
+ * as this causes mbus errors (which can occur for example
+ * for PCI aborts) to throw CPU aborts, which we're not set
+ * up to deal with.
+ */
+ writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
+
+ BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus",
+ BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
+ DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ));
+
+ kirkwood_setup_wins();
+
+ kirkwood_l2_init();
+
+ /* Setup root of clk tree */
+ kirkwood_clk_init();
+
+ /* internal devices that every board has */
+ kirkwood_rtc_init();
+ kirkwood_wdt_init();
+ kirkwood_xor0_init();
+ kirkwood_xor1_init();
+ kirkwood_crypto_init();
+
+ kirkwood_pm_init();
+ kirkwood_cpuidle_init();
+#ifdef CONFIG_KEXEC
+ kexec_reinit = kirkwood_enable_pcie;
+#endif
+}
+
+void kirkwood_restart(enum reboot_mode mode, const char *cmd)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
diff -ruN a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
--- a/arch/arm/mach-kirkwood/common.h 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/common.h 2018-10-27 18:30:56.006359292 -0600
@@ -0,0 +1,74 @@
+/*
+ * arch/arm/mach-kirkwood/common.h
+ *
+ * Core functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_KIRKWOOD_COMMON_H
+#define __ARCH_KIRKWOOD_COMMON_H
+
+#include <linux/reboot.h>
+
+struct dsa_platform_data;
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+struct mvsdio_platform_data;
+struct mtd_partition;
+struct mtd_info;
+struct kirkwood_asoc_platform_data;
+
+#define KW_PCIE0 (1 << 0)
+#define KW_PCIE1 (1 << 1)
+
+/*
+ * Basic Kirkwood init functions used early by machine-setup.
+ */
+void kirkwood_map_io(void);
+void kirkwood_init(void);
+void kirkwood_init_early(void);
+void kirkwood_init_irq(void);
+
+void kirkwood_setup_wins(void);
+
+void kirkwood_enable_pcie(void);
+void kirkwood_pcie_id(u32 *dev, u32 *rev);
+
+void kirkwood_ehci_init(void);
+void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
+void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
+void kirkwood_pcie_init(unsigned int portmask);
+void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
+void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
+void kirkwood_spi_init(void);
+void kirkwood_i2c_init(void);
+void kirkwood_uart0_init(void);
+void kirkwood_uart1_init(void);
+void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
+void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
+ int (*dev_ready)(struct mtd_info *));
+void kirkwood_audio_init(void);
+void kirkwood_cpuidle_init(void);
+void kirkwood_cpufreq_init(void);
+
+void kirkwood_restart(enum reboot_mode, const char *);
+void kirkwood_clk_init(void);
+
+/* early init functions not converted to fdt yet */
+char *kirkwood_id(void);
+void kirkwood_l2_init(void);
+void kirkwood_wdt_init(void);
+void kirkwood_xor0_init(void);
+void kirkwood_xor1_init(void);
+void kirkwood_crypto_init(void);
+
+extern int kirkwood_tclk;
+extern void kirkwood_timer_init(void);
+
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+#endif
diff -ruN a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c 2018-10-27 18:30:56.006359292 -0600
@@ -0,0 +1,231 @@
+/*
+ * arch/arm/mach-kirkwood/d2net_v2-setup.c
+ *
+ * LaCie d2 Network Space v2 Board Setup
+ *
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
+#include "common.h"
+#include "mpp.h"
+#include "lacie_v2-common.h"
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data d2net_v2_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data d2net_v2_sata_data = {
+ .n_ports = 2,
+};
+
+/*****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_PUSH_BUTTON 34
+#define D2NET_V2_GPIO_POWER_SWITCH_ON 13
+#define D2NET_V2_GPIO_POWER_SWITCH_OFF 15
+
+#define D2NET_V2_SWITCH_POWER_ON 0x1
+#define D2NET_V2_SWITCH_POWER_OFF 0x2
+
+static struct gpio_keys_button d2net_v2_buttons[] = {
+ [0] = {
+ .type = EV_SW,
+ .code = D2NET_V2_SWITCH_POWER_ON,
+ .gpio = D2NET_V2_GPIO_POWER_SWITCH_ON,
+ .desc = "Back power switch (on|auto)",
+ .active_low = 0,
+ },
+ [1] = {
+ .type = EV_SW,
+ .code = D2NET_V2_SWITCH_POWER_OFF,
+ .gpio = D2NET_V2_GPIO_POWER_SWITCH_OFF,
+ .desc = "Back power switch (auto|off)",
+ .active_low = 0,
+ },
+ [2] = {
+ .code = KEY_POWER,
+ .gpio = D2NET_V2_GPIO_PUSH_BUTTON,
+ .desc = "Front Push Button",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data d2net_v2_button_data = {
+ .buttons = d2net_v2_buttons,
+ .nbuttons = ARRAY_SIZE(d2net_v2_buttons),
+};
+
+static struct platform_device d2net_v2_gpio_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &d2net_v2_button_data,
+ },
+};
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_RED_LED 12
+
+static struct gpio_led d2net_v2_gpio_led_pins[] = {
+ {
+ .name = "d2net_v2:red:fail",
+ .gpio = D2NET_V2_GPIO_RED_LED,
+ },
+};
+
+static struct gpio_led_platform_data d2net_v2_gpio_leds_data = {
+ .num_leds = ARRAY_SIZE(d2net_v2_gpio_led_pins),
+ .leds = d2net_v2_gpio_led_pins,
+};
+
+static struct platform_device d2net_v2_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &d2net_v2_gpio_leds_data,
+ },
+};
+
+/*****************************************************************************
+ * Dual-GPIO CPLD LEDs
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_BLUE_LED_SLOW 29
+#define D2NET_V2_GPIO_BLUE_LED_CMD 30
+
+static struct ns2_led d2net_v2_led_pins[] = {
+ {
+ .name = "d2net_v2:blue:sata",
+ .cmd = D2NET_V2_GPIO_BLUE_LED_CMD,
+ .slow = D2NET_V2_GPIO_BLUE_LED_SLOW,
+ },
+};
+
+static struct ns2_led_platform_data d2net_v2_leds_data = {
+ .num_leds = ARRAY_SIZE(d2net_v2_led_pins),
+ .leds = d2net_v2_led_pins,
+};
+
+static struct platform_device d2net_v2_leds = {
+ .name = "leds-ns2",
+ .id = -1,
+ .dev = {
+ .platform_data = &d2net_v2_leds_data,
+ },
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static unsigned int d2net_v2_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP6_SYSRST_OUTn,
+ MPP7_GPO, /* Request power-off */
+ MPP8_TW0_SDA,
+ MPP9_TW0_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_GPO, /* Red led */
+ MPP13_GPIO, /* Rear power switch (on|auto) */
+ MPP14_GPIO, /* USB fuse */
+ MPP15_GPIO, /* Rear power switch (auto|off) */
+ MPP16_GPIO, /* SATA 0 power */
+ MPP21_SATA0_ACTn,
+ MPP24_GPIO, /* USB mode select */
+ MPP26_GPIO, /* USB device vbus */
+ MPP28_GPIO, /* USB enable host vbus */
+ MPP29_GPIO, /* Blue led (slow register) */
+ MPP30_GPIO, /* Blue led (command register) */
+ MPP34_GPIO, /* Power button (1 = Released, 0 = Pushed) */
+ MPP35_GPIO, /* Inhibit power-off */
+ 0
+};
+
+#define D2NET_V2_GPIO_POWER_OFF 7
+
+static void d2net_v2_power_off(void)
+{
+ gpio_set_value(D2NET_V2_GPIO_POWER_OFF, 1);
+}
+
+static void __init d2net_v2_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(d2net_v2_mpp_config);
+
+ lacie_v2_hdd_power_init(1);
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&d2net_v2_ge00_data);
+ kirkwood_sata_init(&d2net_v2_sata_data);
+ kirkwood_uart0_init();
+ lacie_v2_register_flash();
+ lacie_v2_register_i2c_devices();
+
+ platform_device_register(&d2net_v2_leds);
+ platform_device_register(&d2net_v2_gpio_leds);
+ platform_device_register(&d2net_v2_gpio_buttons);
+
+ if (gpio_request(D2NET_V2_GPIO_POWER_OFF, "power-off") == 0 &&
+ gpio_direction_output(D2NET_V2_GPIO_POWER_OFF, 0) == 0)
+ pm_power_off = d2net_v2_power_off;
+ else
+ pr_err("d2net_v2: failed to configure power-off GPIO\n");
+}
+
+MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
+ .atag_offset = 0x100,
+ .init_machine = d2net_v2_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
--- a/arch/arm/mach-kirkwood/dockstar-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c 2018-10-27 18:30:56.006359292 -0600
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-kirkwood/dockstar-setup.c
+ *
+ * Seagate FreeAgent DockStar Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition dockstar_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "pogoplug",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_32M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct gpio_led dockstar_led_pins[] = {
+ {
+ .name = "status:green:health",
+ .default_trigger = "default-on",
+ .gpio = 46,
+ .active_low = 1,
+ },
+ {
+ .name = "status:orange:fault",
+ .default_trigger = "none",
+ .gpio = 47,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led_platform_data dockstar_led_data = {
+ .leds = dockstar_led_pins,
+ .num_leds = ARRAY_SIZE(dockstar_led_pins),
+};
+
+static struct platform_device dockstar_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &dockstar_led_data,
+ }
+};
+
+static unsigned int dockstar_mpp_config[] __initdata = {
+ MPP29_GPIO, /* USB Power Enable */
+ MPP46_GPIO, /* LED Green */
+ MPP47_GPIO, /* LED Orange */
+ 0
+};
+
+static void __init dockstar_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ /* setup gpio pin select */
+ kirkwood_mpp_conf(dockstar_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25);
+
+ if (gpio_request(29, "USB Power Enable") != 0 ||
+ gpio_direction_output(29, 1) != 0)
+ pr_err("can't set up GPIO 29 (USB Power Enable)\n");
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&dockstar_ge00_data);
+
+ platform_device_register(&dockstar_leds);
+}
+
+MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
+ .atag_offset = 0x100,
+ .init_machine = dockstar_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/goflexhome-setup.c b/arch/arm/mach-kirkwood/goflexhome-setup.c
--- a/arch/arm/mach-kirkwood/goflexhome-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/goflexhome-setup.c 2018-10-27 18:30:56.006359292 -0600
@@ -0,0 +1,124 @@
+/*
+ * arch/arm/mach-kirkwood/goflexhome-setup.c
+ *
+ * Seagate GoFlex Home Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition goflexhome_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_2M + SZ_4M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data goflexhome_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data goflexhome_sata_data = {
+ .n_ports = 1,
+};
+
+static struct gpio_led goflexhome_led_pins[] = {
+ {
+ .name = "status:green:health",
+ .default_trigger = "default-on",
+ .gpio = 46,
+ .active_low = 1,
+ },
+ {
+ .name = "status:orange:fault",
+ .default_trigger = "none",
+ .gpio = 47,
+ .active_low = 1,
+ },
+ {
+ .name = "status:white:misc",
+ .default_trigger = "ide-disk1",
+ .gpio = 40,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_led_platform_data goflexhome_led_data = {
+ .leds = goflexhome_led_pins,
+ .num_leds = ARRAY_SIZE(goflexhome_led_pins),
+};
+
+static struct platform_device goflexhome_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &goflexhome_led_data,
+ }
+};
+
+static unsigned int goflexhome_mpp_config[] __initdata = {
+ MPP29_GPIO, /* USB Power Enable */
+ MPP47_GPIO, /* LED Orange */
+ MPP46_GPIO, /* LED Green */
+ MPP40_GPIO, /* LED White */
+ 0
+};
+
+static void __init goflexhome_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ /* setup gpio pin select */
+ kirkwood_mpp_conf(goflexhome_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(goflexhome_nand_parts), 40);
+
+ if (gpio_request(29, "USB Power Enable") != 0 ||
+ gpio_direction_output(29, 1) != 0)
+ printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&goflexhome_ge00_data);
+ kirkwood_sata_init(&goflexhome_sata_data);
+
+ platform_device_register(&goflexhome_leds);
+}
+
+MACHINE_START(GOFLEXHOME, "Seagate GoFlex Home")
+ /* Maintainer: Peter Carmichael <peterjncarm@ovi.com> */
+ .atag_offset = 0x100,
+ .init_machine = goflexhome_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
+
diff -ruN a/arch/arm/mach-kirkwood/goflexnet-setup.c b/arch/arm/mach-kirkwood/goflexnet-setup.c
--- a/arch/arm/mach-kirkwood/goflexnet-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/goflexnet-setup.c 2018-10-27 18:30:56.006359292 -0600
@@ -0,0 +1,177 @@
+/*
+ * arch/arm/mach-kirkwood/goflexnet-setup.c
+ *
+ * Seagate GoFlex Net Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition goflexnet_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "pogoplug",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_32M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data goflexnet_sata_data = {
+ .n_ports = 2,
+};
+
+static struct gpio_led goflexnet_led_pins[] = {
+ {
+ .name = "status:green:health",
+ .default_trigger = "default-on",
+ .gpio = 46, // 0x4000
+ .active_low = 1,
+ },
+ {
+ .name = "status:orange:fault",
+ .default_trigger = "none",
+ .gpio = 47, // 0x8000
+ .active_low = 1,
+ },
+ {
+ .name = "status:white:left0",
+ .default_trigger = "none",
+ .gpio = 42, // 0x0400
+ .active_low = 0,
+ },
+ {
+ .name = "status:white:left1",
+ .default_trigger = "none",
+ .gpio = 43, // 0x0800
+ .active_low = 0,
+ },
+ {
+ .name = "status:white:left2",
+ .default_trigger = "none",
+ .gpio = 44, // 0x1000
+ .active_low = 0,
+ },
+ {
+ .name = "status:white:left3",
+ .default_trigger = "none",
+ .gpio = 45, // 0x2000
+ .active_low = 0,
+ },
+ {
+ .name = "status:white:right0",
+ .default_trigger = "none",
+ .gpio = 38, // 0x0040
+ .active_low = 0,
+ },
+ {
+ .name = "status:white:right1",
+ .default_trigger = "none",
+ .gpio = 39, // 0x0080
+ .active_low = 0,
+ },
+ {
+ .name = "status:white:right2",
+ .default_trigger = "none",
+ .gpio = 40, // 0x0100
+ .active_low = 0,
+ },
+ {
+ .name = "status:white:right3",
+ .default_trigger = "none",
+ .gpio = 41, // 0x0200
+ .active_low = 0,
+ }
+};
+
+static struct gpio_led_platform_data goflexnet_led_data = {
+ .leds = goflexnet_led_pins,
+ .num_leds = ARRAY_SIZE(goflexnet_led_pins),
+};
+
+static struct platform_device goflexnet_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &goflexnet_led_data,
+ }
+};
+
+static unsigned int goflexnet_mpp_config[] __initdata = {
+ MPP29_GPIO, /* USB Power Enable */
+ MPP47_GPIO, /* LED Orange */
+ MPP46_GPIO, /* LED Green */
+ MPP45_GPIO, /* LED Left Capacity 3 */
+ MPP44_GPIO, /* LED Left Capacity 2 */
+ MPP43_GPIO, /* LED Left Capacity 1 */
+ MPP42_GPIO, /* LED Left Capacity 0 */
+ MPP41_GPIO, /* LED Right Capacity 3 */
+ MPP40_GPIO, /* LED Right Capacity 2 */
+ MPP39_GPIO, /* LED Right Capacity 1 */
+ MPP38_GPIO, /* LED Right Capacity 0 */
+ 0
+};
+
+static void __init goflexnet_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ /* setup gpio pin select */
+ kirkwood_mpp_conf(goflexnet_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(goflexnet_nand_parts), 40);
+
+ if (gpio_request(29, "USB Power Enable") != 0 ||
+ gpio_direction_output(29, 1) != 0)
+ printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&goflexnet_ge00_data);
+ kirkwood_sata_init(&goflexnet_sata_data);
+
+ platform_device_register(&goflexnet_leds);
+}
+
+MACHINE_START(GOFLEXNET, "Seagate GoFlex Net")
+ /* Maintainer: Peter Carmichael <peterjncarm@ovi.com> */
+ .atag_offset = 0x100,
+ .init_machine = goflexnet_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
+
diff -ruN a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
--- a/arch/arm/mach-kirkwood/guruplug-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c 2018-10-27 18:30:56.006359292 -0600
@@ -0,0 +1,228 @@
+/*
+ * arch/arm/mach-kirkwood/guruplug-setup.c
+ *
+ * Marvell GuruPlug Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition dreamplug_partitions[] = {
+ {
+ .name = "u-boot",
+ .size = SZ_512K,
+ .offset = 0,
+ }, {
+ .name = "u-boot env",
+ .size = SZ_64K,
+ .offset = SZ_512K + SZ_512K,
+ },
+};
+
+static const struct flash_platform_data dreamplug_spi_slave_data = {
+ .type = "mx25l1606e",
+ .name = "spi_flash",
+ .parts = dreamplug_partitions,
+ .nr_parts = ARRAY_SIZE(dreamplug_partitions),
+};
+
+static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &dreamplug_spi_slave_data,
+ .irq = -1,
+ .max_speed_hz = 50000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static struct mtd_partition guruplug_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data guruplug_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data guruplug_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv_sata_platform_data guruplug_sata_data = {
+ .n_ports = 1,
+};
+
+static struct mvsdio_platform_data guruplug_mvsdio_data = {
+ /* unfortunately the CD signal has not been connected */
+ .gpio_card_detect = -1,
+ .gpio_write_protect = -1,
+};
+
+static struct gpio_led guruplug_led_pins[] = {
+ {
+ .name = "status:red:fault",
+ .default_trigger = "none",
+ .gpio = 46,
+ .active_low = 1,
+ },
+ {
+ .name = "status:green:health",
+ .default_trigger = "default-on",
+ .gpio = 47,
+ .active_low = 1,
+ },
+ {
+ .name = "status:red:wmode",
+ .gpio = 48,
+ .active_low = 1,
+ },
+ {
+ .name = "status:green:wmode",
+ .gpio = 49,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data guruplug_led_data = {
+ .leds = guruplug_led_pins,
+ .num_leds = ARRAY_SIZE(guruplug_led_pins),
+};
+
+static struct platform_device guruplug_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &guruplug_led_data,
+ }
+};
+
+static struct gpio_led dreamplug_led_pins[] = {
+ {
+ .name = "status:blue:bt",
+ .gpio = 47,
+ .active_low = 1,
+ },
+ {
+ .name = "status:green:wifi",
+ .gpio = 48,
+ .active_low = 1,
+ },
+ {
+ .name = "status:blue:ap",
+ .gpio = 49,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data dreamplug_led_data = {
+ .leds = dreamplug_led_pins,
+ .num_leds = ARRAY_SIZE(dreamplug_led_pins),
+};
+
+static unsigned int dreamplug_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP47_GPIO, /* Bluetooth LED */
+ MPP48_GPIO, /* Wifi LED */
+ MPP49_GPIO, /* Wifi AP LED */
+ 0
+};
+
+
+static unsigned int guruplug_mpp_config[] __initdata = {
+ MPP46_GPIO, /* M_RLED */
+ MPP47_GPIO, /* M_GLED */
+ MPP48_GPIO, /* B_RLED */
+ MPP49_GPIO, /* B_GLED */
+ 0
+};
+
+static void __init guruplug_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ if (machine_is_guruplug()) {
+ kirkwood_mpp_conf(guruplug_mpp_config);
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25);
+ }
+
+ if (machine_is_dreamplug()) {
+ kirkwood_mpp_conf(dreamplug_mpp_config);
+ kirkwood_uart0_init();
+ spi_register_board_info(dreamplug_spi_slave_info,
+ ARRAY_SIZE(dreamplug_spi_slave_info));
+ kirkwood_spi_init();
+ guruplug_leds.dev.platform_data = &dreamplug_led_data;
+ }
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&guruplug_ge00_data);
+ kirkwood_ge01_init(&guruplug_ge01_data);
+ kirkwood_sata_init(&guruplug_sata_data);
+ kirkwood_sdio_init(&guruplug_mvsdio_data);
+
+ platform_device_register(&guruplug_leds);
+}
+
+#ifdef CONFIG_MACH_GURUPLUG
+MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
+ /* Maintainer: Siddarth Gore <gores@marvell.com> */
+ .atag_offset = 0x100,
+ .init_machine = guruplug_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_DREAMPLUG
+MACHINE_START(DREAMPLUG, "Marvell DreamPlug Reference Board")
+ /* Maintainer: ? */
+ .atag_offset = 0x100,
+ .init_machine = guruplug_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
+#endif
diff -ruN a/arch/arm/mach-kirkwood/iconnect-setup.c b/arch/arm/mach-kirkwood/iconnect-setup.c
--- a/arch/arm/mach-kirkwood/iconnect-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/iconnect-setup.c 2018-10-27 18:30:56.010359272 -0600
@@ -0,0 +1,204 @@
+/*
+ * arch/arm/mach-kirkwood/iconnect-setup.c
+ *
+ * Iomega iConnect Wireless
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition iconnect_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_1M + SZ_2M
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_32M,
+ }, {
+ .name = "data",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data iconnect_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(11),
+};
+
+static struct gpio_led iconnect_led_pins[] = {
+ {
+ .name = "iconnect:led_level",
+ .default_trigger = "default-on",
+ .gpio = 41,
+ },
+ {
+ .name = "iconnect:blue:power",
+ .default_trigger = "default-on",
+ .gpio = 42,
+ },
+ {
+ .name = "iconnect:red:power",
+ .gpio = 43,
+ },
+ {
+ .name = "iconnect:blue:usb1",
+ .gpio = 44,
+ },
+ {
+ .name = "iconnect:blue:usb2",
+ .gpio = 45,
+ },
+ {
+ .name = "iconnect:blue:usb3",
+ .gpio = 46,
+ },
+ {
+ .name = "iconnect:blue:usb4",
+ .gpio = 47,
+ },
+ {
+ .name = "iconnect:blue:otb",
+ .gpio = 48,
+ },
+};
+
+static struct gpio_led_platform_data iconnect_led_data = {
+ .leds = iconnect_led_pins,
+ .num_leds = ARRAY_SIZE(iconnect_led_pins),
+};
+
+static struct platform_device iconnect_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &iconnect_led_data,
+ }
+};
+
+#define ICONNECT_GPIO_KEY_RESET 12
+#define ICONNECT_GPIO_KEY_OTB 35
+
+#define ICONNECT_SW_RESET 0x00
+#define ICONNECT_SW_OTB 0x01
+
+static struct gpio_keys_button iconnect_buttons[] = {
+ {
+ .type = EV_SW,
+ .code = ICONNECT_SW_RESET,
+ .gpio = ICONNECT_GPIO_KEY_RESET,
+ .desc = "Reset Button",
+ .active_low = 1,
+ .debounce_interval = 100,
+ },
+ {
+ .type = EV_SW,
+ .code = ICONNECT_SW_OTB,
+ .gpio = ICONNECT_GPIO_KEY_OTB,
+ .desc = "OTB Button",
+ .active_low = 1,
+ .debounce_interval = 100,
+ },
+};
+
+static struct gpio_keys_platform_data iconnect_button_data = {
+ .buttons = iconnect_buttons,
+ .nbuttons = ARRAY_SIZE(iconnect_buttons),
+};
+
+static struct platform_device iconnect_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &iconnect_button_data,
+ },
+};
+
+static unsigned int iconnect_mpp_config[] __initdata = {
+ MPP12_GPIO, /*Input for reset button*/
+ MPP35_GPIO, /*Input for OTB button*/
+ MPP41_GPIO,
+ MPP42_GPIO,
+ MPP43_GPIO,
+ MPP44_GPIO,
+ MPP45_GPIO,
+ MPP46_GPIO,
+ MPP47_GPIO,
+ MPP48_GPIO,
+ 0
+};
+
+static struct i2c_board_info __initdata iconnect_i2c_rtc = {
+ I2C_BOARD_INFO("lm63", 0x4c),
+};
+
+static void __init iconnect_init(void)
+{
+ u32 dev, rev;
+
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(iconnect_mpp_config);
+
+ kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 40);
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&iconnect_ge00_data);
+ kirkwood_pcie_id(&dev, &rev);
+
+ kirkwood_uart0_init();
+
+ platform_device_register(&iconnect_leds);
+ platform_device_register(&iconnect_button_device);
+
+ kirkwood_i2c_init();
+ i2c_register_board_info(0, &iconnect_i2c_rtc, 1);
+
+}
+
+static int __init iconnect_pci_init(void)
+{
+ if (machine_is_iconnect())
+ kirkwood_pcie_init(KW_PCIE0);
+
+ return 0;
+}
+subsys_initcall(iconnect_pci_init);
+
+
+MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
+ .atag_offset = 0x100,
+ .init_machine = iconnect_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h 2018-10-27 18:30:56.010359272 -0600
@@ -0,0 +1,86 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/kirkwood.h>
+
+#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100)
+#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100)
+#define CPU_CONFIG_ERROR_PROP 0x00000004
+
+#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
+#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104)
+#define CPU_RESET 0x00000002
+
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
+#define RSTOUTn_MASK_PHYS (BRIDGE_PHYS_BASE + 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
+#define SOFT_RESET 0x00000001
+
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110)
+
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200)
+#define IRQ_CAUSE_LOW_OFF 0x0000
+#define IRQ_MASK_LOW_OFF 0x0004
+#define IRQ_CAUSE_HIGH_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300)
+
+#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128)
+#define L2_WRITETHROUGH 0x00000010
+
+#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c)
+#define CGC_BIT_GE0 (0)
+#define CGC_BIT_PEX0 (2)
+#define CGC_BIT_USB0 (3)
+#define CGC_BIT_SDIO (4)
+#define CGC_BIT_TSU (5)
+#define CGC_BIT_DUNIT (6)
+#define CGC_BIT_RUNIT (7)
+#define CGC_BIT_XOR0 (8)
+#define CGC_BIT_AUDIO (9)
+#define CGC_BIT_SATA0 (14)
+#define CGC_BIT_SATA1 (15)
+#define CGC_BIT_XOR1 (16)
+#define CGC_BIT_CRYPTO (17)
+#define CGC_BIT_PEX1 (18)
+#define CGC_BIT_GE1 (19)
+#define CGC_BIT_TDM (20)
+#define CGC_GE0 (1 << 0)
+#define CGC_PEX0 (1 << 2)
+#define CGC_USB0 (1 << 3)
+#define CGC_SDIO (1 << 4)
+#define CGC_TSU (1 << 5)
+#define CGC_DUNIT (1 << 6)
+#define CGC_RUNIT (1 << 7)
+#define CGC_XOR0 (1 << 8)
+#define CGC_AUDIO (1 << 9)
+#define CGC_POWERSAVE (1 << 11)
+#define CGC_SATA0 (1 << 14)
+#define CGC_SATA1 (1 << 15)
+#define CGC_XOR1 (1 << 16)
+#define CGC_CRYPTO (1 << 17)
+#define CGC_PEX1 (1 << 18)
+#define CGC_GE1 (1 << 19)
+#define CGC_TDM (1 << 20)
+#define CGC_RESERVED (0x6 << 21)
+
+#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118)
+#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x118)
+
+#endif
diff -ruN a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
--- a/arch/arm/mach-kirkwood/include/mach/entry-macro.S 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/include/mach/entry-macro.S 2018-10-27 18:30:56.010359272 -0600
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Kirkwood platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/bridge-regs.h>
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IRQ_VIRT_BASE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ @ check low interrupts
+ ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
+ mov \irqnr, #31
+ ands \irqstat, \irqstat, \tmp
+ bne 1001f
+
+ @ if no low interrupts set, check high interrupts
+ ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF]
+ mov \irqnr, #63
+ ands \irqstat, \irqstat, \tmp
+
+ @ find first active interrupt source
+1001: clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff -ruN a/arch/arm/mach-kirkwood/include/mach/hardware.h b/arch/arm/mach-kirkwood/include/mach/hardware.h
--- a/arch/arm/mach-kirkwood/include/mach/hardware.h 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/include/mach/hardware.h 2018-10-27 18:30:56.010359272 -0600
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "kirkwood.h"
+
+#endif
diff -ruN a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
--- a/arch/arm/mach-kirkwood/include/mach/irqs.h 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/include/mach/irqs.h 2018-10-27 18:30:56.010359272 -0600
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/*
+ * Low Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_HIGH_SUM 0
+#define IRQ_KIRKWOOD_BRIDGE 1
+#define IRQ_KIRKWOOD_HOST2CPU 2
+#define IRQ_KIRKWOOD_CPU2HOST 3
+#define IRQ_KIRKWOOD_XOR_00 5
+#define IRQ_KIRKWOOD_XOR_01 6
+#define IRQ_KIRKWOOD_XOR_10 7
+#define IRQ_KIRKWOOD_XOR_11 8
+#define IRQ_KIRKWOOD_PCIE 9
+#define IRQ_KIRKWOOD_PCIE1 10
+#define IRQ_KIRKWOOD_GE00_SUM 11
+#define IRQ_KIRKWOOD_GE01_SUM 15
+#define IRQ_KIRKWOOD_USB 19
+#define IRQ_KIRKWOOD_SATA 21
+#define IRQ_KIRKWOOD_CRYPTO 22
+#define IRQ_KIRKWOOD_SPI 23
+#define IRQ_KIRKWOOD_I2S 24
+#define IRQ_KIRKWOOD_TS_0 26
+#define IRQ_KIRKWOOD_SDIO 28
+#define IRQ_KIRKWOOD_TWSI 29
+#define IRQ_KIRKWOOD_AVB 30
+#define IRQ_KIRKWOOD_TDMI 31
+
+/*
+ * High Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_UART_0 33
+#define IRQ_KIRKWOOD_UART_1 34
+#define IRQ_KIRKWOOD_GPIO_LOW_0_7 35
+#define IRQ_KIRKWOOD_GPIO_LOW_8_15 36
+#define IRQ_KIRKWOOD_GPIO_LOW_16_23 37
+#define IRQ_KIRKWOOD_GPIO_LOW_24_31 38
+#define IRQ_KIRKWOOD_GPIO_HIGH_0_7 39
+#define IRQ_KIRKWOOD_GPIO_HIGH_8_15 40
+#define IRQ_KIRKWOOD_GPIO_HIGH_16_23 41
+#define IRQ_KIRKWOOD_GE00_ERR 46
+#define IRQ_KIRKWOOD_GE01_ERR 47
+#define IRQ_KIRKWOOD_RTC 53
+
+/*
+ * KIRKWOOD General Purpose Pins
+ */
+#define IRQ_KIRKWOOD_GPIO_START 64
+#define NR_GPIO_IRQS 50
+
+#define NR_IRQS (IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff -ruN a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h 2018-10-27 18:30:56.010359272 -0600
@@ -0,0 +1,142 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ * 88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_KIRKWOOD_H
+#define __ASM_ARCH_KIRKWOOD_H
+
+/*
+ * Marvell Kirkwood address maps.
+ *
+ * phys
+ * e0000000 PCIe #0 Memory space
+ * e8000000 PCIe #1 Memory space
+ * f1000000 on-chip peripheral registers
+ * f2000000 PCIe #0 I/O space
+ * f3000000 PCIe #1 I/O space
+ * f4000000 NAND controller address window
+ * f5000000 Security Accelerator SRAM
+ *
+ * virt phys size
+ * fed00000 f1000000 1M on-chip peripheral registers
+ * fee00000 f2000000 1M PCIe #0 I/O space
+ * fef00000 f3000000 1M PCIe #1 I/O space
+ */
+
+#define KIRKWOOD_SRAM_PHYS_BASE 0xf5000000
+#define KIRKWOOD_SRAM_SIZE SZ_2K
+
+#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf4000000
+#define KIRKWOOD_NAND_MEM_SIZE SZ_1K
+
+#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
+#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000
+#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K
+
+#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
+#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
+#define KIRKWOOD_PCIE_IO_SIZE SZ_64K
+
+#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
+#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000)
+#define KIRKWOOD_REGS_SIZE SZ_1M
+
+#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
+#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000
+#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
+
+#define KIRKWOOD_PCIE1_MEM_PHYS_BASE 0xe8000000
+#define KIRKWOOD_PCIE1_MEM_BUS_BASE 0xe8000000
+#define KIRKWOOD_PCIE1_MEM_SIZE SZ_128M
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
+#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
+#define DDR_WINDOW_CPU_BASE (DDR_PHYS_BASE + 0x1500)
+#define DDR_WINDOW_CPU_SZ (0x20)
+#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
+
+#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000)
+#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030)
+#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034)
+#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100)
+#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140)
+#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300)
+#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600)
+#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100)
+
+#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000)
+#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE)
+#define BRIDGE_WINS_SZ (0x80)
+
+#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000)
+
+#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000)
+#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70)
+#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04)
+#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000)
+#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70)
+#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04)
+
+#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000)
+
+#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800)
+#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800)
+#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900)
+#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900)
+#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00)
+#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00)
+#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
+#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00)
+
+#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000)
+
+#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000)
+#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000)
+#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050)
+#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330)
+#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050)
+#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330)
+
+#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000)
+
+#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000)
+#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000)
+
+/*
+ * Supported devices and revisions.
+ */
+#define MV88F6281_DEV_ID 0x6281
+#define MV88F6281_REV_Z0 0
+#define MV88F6281_REV_A0 2
+#define MV88F6281_REV_A1 3
+
+#define MV88F6192_DEV_ID 0x6192
+#define MV88F6192_REV_Z0 0
+#define MV88F6192_REV_A0 2
+#define MV88F6192_REV_A1 3
+
+#define MV88F6180_DEV_ID 0x6180
+#define MV88F6180_REV_A0 2
+#define MV88F6180_REV_A1 3
+
+#define MV88F6282_DEV_ID 0x6282
+#define MV88F6282_REV_A0 0
+#define MV88F6282_REV_A1 1
+#endif
diff -ruN a/arch/arm/mach-kirkwood/include/mach/uncompress.h b/arch/arm/mach-kirkwood/include/mach/uncompress.h
--- a/arch/arm/mach-kirkwood/include/mach/uncompress.h 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/include/mach/uncompress.h 2018-10-27 18:30:56.010359272 -0600
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/kirkwood.h>
+
+#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+ unsigned char *base = SERIAL_BASE;
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ if (base[UART_LSR << 2] & UART_LSR_THRE)
+ break;
+ barrier();
+ }
+
+ base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+ unsigned char *base = SERIAL_BASE;
+ unsigned char mask;
+ int i;
+
+ mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+ for (i = 0; i < 0x1000; i++) {
+ if ((base[UART_LSR << 2] & mask) == mask)
+ break;
+ barrier();
+ }
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
diff -ruN a/arch/arm/mach-kirkwood/ionics-stratus-setup.c b/arch/arm/mach-kirkwood/ionics-stratus-setup.c
--- a/arch/arm/mach-kirkwood/ionics-stratus-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/ionics-stratus-setup.c 2018-10-27 18:30:56.010359272 -0600
@@ -0,0 +1,137 @@
+/*
+ * arch/arm/mach-kirkwood/ionics-stratus-setup.c
+ *
+ * Ionics Stratus Board Setup arcNumber 4184
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition ionics_stratus_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data ionics_stratus_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mvsdio_platform_data ionics_stratus_mvsdio_data = {
+ /* unfortunately the CD signal has not been connected */
+};
+
+static struct gpio_led ionics_stratus_led_pins[] = {
+ {
+ .name = "status:green:led1",
+ .default_trigger = "none",
+ .gpio = 44,
+ .active_low = 1,
+ },
+ {
+ .name = "status:green:led2",
+ .default_trigger = "none",
+ .gpio = 40,
+ .active_low = 1,
+ },
+ {
+ .name = "status:green:led3",
+ .default_trigger = "default-on",
+ .gpio = 36,
+ .active_low = 1,
+ },
+ {
+ .name = "status:green:led4",
+ .default_trigger = "default-on",
+ .gpio = 39,
+ .active_low = 1,
+ },
+
+};
+
+static struct gpio_led_platform_data ionics_stratus_led_data = {
+ .leds = ionics_stratus_led_pins,
+ .num_leds = ARRAY_SIZE(ionics_stratus_led_pins),
+};
+
+static struct platform_device ionics_stratus_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &ionics_stratus_led_data,
+ }
+};
+
+static unsigned int ionics_stratus_mpp_config[] __initdata = {
+ MPP21_GPIO, /* USB PORT 1 Pw Enable */
+ MPP32_GPIO, /* USB PORT 2 Pw Enable */
+ MPP48_GPIO, /* WIFI Power Down */
+ MPP49_GPIO, /* WIFI Host Wakeup */
+ MPP42_GPIO, /* WIFI MAC Wakeup */
+ MPP44_GPIO, /* LED 1 */
+ MPP40_GPIO, /* LED 2 */
+ MPP36_GPIO, /* LED 3 */
+ MPP39_GPIO, /* LED 4 */
+ MPP23_GPIO, /* BTN 1 */
+ MPP37_GPIO, /* BTN 2 */
+ MPP38_GPIO, /* BTN 3 */
+ 0
+};
+
+static void __init ionics_stratus_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ /* setup gpio pin select */
+ kirkwood_mpp_conf(ionics_stratus_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(ionics_stratus_nand_parts), 25);
+
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&ionics_stratus_ge00_data);
+ kirkwood_sdio_init(&ionics_stratus_mvsdio_data);
+
+ platform_device_register(&ionics_stratus_leds);
+}
+
+MACHINE_START(IONICS_STRATUS, "Ionics Plug Computer Plus - Stratus")
+ /* Maintainer: Mike Brown <mbrown@archlinuxarm.org> */
+ .atag_offset = 0x100,
+ .init_machine = ionics_stratus_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
--- a/arch/arm/mach-kirkwood/irq.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/irq.c 2018-10-27 18:30:56.010359272 -0600
@@ -0,0 +1,82 @@
+/*
+ * arch/arm/mach-kirkwood/irq.c
+ *
+ * Kirkwood IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <asm/exception.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
+#include <plat/irq.h>
+#include "common.h"
+
+static int __initdata gpio0_irqs[4] = {
+ IRQ_KIRKWOOD_GPIO_LOW_0_7,
+ IRQ_KIRKWOOD_GPIO_LOW_8_15,
+ IRQ_KIRKWOOD_GPIO_LOW_16_23,
+ IRQ_KIRKWOOD_GPIO_LOW_24_31,
+};
+
+static int __initdata gpio1_irqs[4] = {
+ IRQ_KIRKWOOD_GPIO_HIGH_0_7,
+ IRQ_KIRKWOOD_GPIO_HIGH_8_15,
+ IRQ_KIRKWOOD_GPIO_HIGH_16_23,
+ 0,
+};
+
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+/*
+ * Compiling with both non-DT and DT support enabled, will
+ * break asm irq handler used by non-DT boards. Therefore,
+ * we provide a C-style irq handler even for non-DT boards,
+ * if MULTI_IRQ_HANDLER is set.
+ */
+
+static void __iomem *kirkwood_irq_base = IRQ_VIRT_BASE;
+
+asmlinkage void
+__exception_irq_entry kirkwood_legacy_handle_irq(struct pt_regs *regs)
+{
+ u32 stat;
+
+ stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_LOW_OFF);
+ stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_LOW_OFF);
+ if (stat) {
+ unsigned int hwirq = __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+ stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_HIGH_OFF);
+ stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_HIGH_OFF);
+ if (stat) {
+ unsigned int hwirq = 32 + __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+}
+#endif
+
+void __init kirkwood_init_irq(void)
+{
+ orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+ orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
+
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+ set_handle_irq(kirkwood_legacy_handle_irq);
+#endif
+
+ /*
+ * Initialize gpiolib for GPIOs 0-49.
+ */
+ orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0,
+ IRQ_KIRKWOOD_GPIO_START, gpio0_irqs);
+ orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0,
+ IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs);
+}
diff -ruN a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c
--- a/arch/arm/mach-kirkwood/lacie_v2-common.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.c 2018-10-27 18:30:56.010359272 -0600
@@ -0,0 +1,114 @@
+/*
+ * arch/arm/mach-kirkwood/lacie_v2-common.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/at24.h>
+#include <linux/gpio.h>
+#include <asm/mach/time.h>
+#include <mach/kirkwood.h>
+#include <mach/irqs.h>
+#include <plat/time.h>
+#include "common.h"
+#include "lacie_v2-common.h"
+
+/*****************************************************************************
+ * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
+ ****************************************************************************/
+
+static struct mtd_partition lacie_v2_flash_parts[] = {
+ {
+ .name = "u-boot",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+};
+
+static const struct flash_platform_data lacie_v2_flash = {
+ .type = "mx25l4005a",
+ .name = "spi_flash",
+ .parts = lacie_v2_flash_parts,
+ .nr_parts = ARRAY_SIZE(lacie_v2_flash_parts),
+};
+
+static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &lacie_v2_flash,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+void __init lacie_v2_register_flash(void)
+{
+ spi_register_board_info(lacie_v2_spi_slave_info,
+ ARRAY_SIZE(lacie_v2_spi_slave_info));
+ kirkwood_spi_init();
+}
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+static struct at24_platform_data at24c04 = {
+ .byte_len = SZ_4K / 8,
+ .page_size = 16,
+};
+
+/*
+ * i2c addr | chip | description
+ * 0x50 | HT24LC04 | eeprom (512B)
+ */
+
+static struct i2c_board_info __initdata lacie_v2_i2c_info[] = {
+ {
+ I2C_BOARD_INFO("24c04", 0x50),
+ .platform_data = &at24c04,
+ }
+};
+
+void __init lacie_v2_register_i2c_devices(void)
+{
+ kirkwood_i2c_init();
+ i2c_register_board_info(0, lacie_v2_i2c_info,
+ ARRAY_SIZE(lacie_v2_i2c_info));
+}
+
+/*****************************************************************************
+ * Hard Disk power
+ ****************************************************************************/
+
+static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
+
+void __init lacie_v2_hdd_power_init(int hdd_num)
+{
+ int i;
+ int err;
+
+ /* Power up all hard disks. */
+ for (i = 0; i < hdd_num; i++) {
+ err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL);
+ if (err == 0) {
+ err = gpio_direction_output(
+ lacie_v2_gpio_hdd_power[i], 1);
+ /* Free the HDD power GPIOs. This allow user-space to
+ * configure them via the gpiolib sysfs interface. */
+ gpio_free(lacie_v2_gpio_hdd_power[i]);
+ }
+ if (err)
+ pr_err("Failed to power up HDD%d\n", i + 1);
+ }
+}
diff -ruN a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h
--- a/arch/arm/mach-kirkwood/lacie_v2-common.h 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.h 2018-10-27 18:30:56.010359272 -0600
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-kirkwood/lacie_v2-common.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
+#define __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
+
+void lacie_v2_register_flash(void);
+void lacie_v2_register_i2c_devices(void);
+void lacie_v2_hdd_power_init(int hdd_num);
+
+#endif
diff -ruN a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
--- a/arch/arm/mach-kirkwood/mpp.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/mpp.c 2018-10-27 18:30:56.014359252 -0600
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/mach-kirkwood/mpp.c
+ *
+ * MPP functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <plat/mpp.h>
+#include "common.h"
+#include "mpp.h"
+
+static unsigned int __init kirkwood_variant(void)
+{
+ u32 dev, rev;
+
+ kirkwood_pcie_id(&dev, &rev);
+
+ if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0)
+ return MPP_F6281_MASK;
+ if (dev == MV88F6282_DEV_ID)
+ return MPP_F6282_MASK;
+ if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0)
+ return MPP_F6192_MASK;
+ if (dev == MV88F6180_DEV_ID)
+ return MPP_F6180_MASK;
+
+ pr_err("MPP setup: unknown kirkwood variant (dev %#x rev %#x)\n",
+ dev, rev);
+ return 0;
+}
+
+void __init kirkwood_mpp_conf(unsigned int *mpp_list)
+{
+ orion_mpp_conf(mpp_list, kirkwood_variant(),
+ MPP_MAX, DEV_BUS_VIRT_BASE);
+}
diff -ruN a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
--- a/arch/arm/mach-kirkwood/mpp.h 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/mpp.h 2018-10-27 18:30:56.014359252 -0600
@@ -0,0 +1,348 @@
+/*
+ * linux/arch/arm/mach-kirkwood/mpp.h -- Multi Purpose Pins
+ *
+ * Copyright 2009: Marvell Technology Group Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __KIRKWOOD_MPP_H
+#define __KIRKWOOD_MPP_H
+
+#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281, _F6282) ( \
+ /* MPP number */ ((_num) & 0xff) | \
+ /* MPP select value */ (((_sel) & 0xf) << 8) | \
+ /* may be input signal */ ((!!(_in)) << 12) | \
+ /* may be output signal */ ((!!(_out)) << 13) | \
+ /* available on F6180 */ ((!!(_F6180)) << 14) | \
+ /* available on F6190 */ ((!!(_F6190)) << 15) | \
+ /* available on F6192 */ ((!!(_F6192)) << 16) | \
+ /* available on F6281 */ ((!!(_F6281)) << 17) | \
+ /* available on F6282 */ ((!!(_F6282)) << 18))
+
+ /* num sel i o 6180 6190 6192 6281 6282 */
+
+#define MPP_F6180_MASK MPP( 0, 0x0, 0, 0, 1, 0, 0, 0, 0 )
+#define MPP_F6190_MASK MPP( 0, 0x0, 0, 0, 0, 1, 0, 0, 0 )
+#define MPP_F6192_MASK MPP( 0, 0x0, 0, 0, 0, 0, 1, 0, 0 )
+#define MPP_F6281_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 1, 0 )
+#define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 )
+#define MPP0_NF_IO2 MPP( 0, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+
+#define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP1_NF_IO3 MPP( 1, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+
+#define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP2_NF_IO4 MPP( 2, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+
+#define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP3_NF_IO5 MPP( 3, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP3_SPI_MISO MPP( 3, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+
+#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 )
+#define MPP4_NF_IO6 MPP( 4, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP4_UART0_RXD MPP( 4, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP4_PTP_CLK MPP( 4, 0xd, 0, 0, 1, 1, 1, 1, 0 )
+
+#define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP5_NF_IO7 MPP( 5, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 0, 1, 1, 1, 1, 0 )
+
+#define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 )
+#define MPP8_TW0_SDA MPP( 8, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_MII0_RXERR MPP( 8, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP8_PTP_CLK MPP( 8, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP8_MII0_COL MPP( 8, 0xd, 0, 0, 1, 1, 1, 1, 1 )
+
+#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 )
+#define MPP9_TW0_SCK MPP( 9, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_UART0_CTS MPP( 9, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_UART1_CTS MPP( 9, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP9_MII0_CRS MPP( 9, 0xd, 0, 0, 1, 1, 1, 1, 1 )
+
+#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+
+#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 )
+#define MPP11_SPI_MISO MPP( 11, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP11_UART0_RXD MPP( 11, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_PTP_CLK MPP( 11, 0xd, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 0, 0, 1, 1, 1, 1 )
+
+#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 )
+#define MPP12_SD_CLK MPP( 12, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP12_TW1_SDA MPP( 12, 0xd, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 )
+#define MPP13_SD_CMD MPP( 13, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP13_LCDPWM MPP( 13, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 )
+#define MPP14_SD_D0 MPP( 14, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP14_UART1_RXD MPP( 14, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP14_AU_SPDIFI MPP( 14, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP14_AU_I2SDI MPP( 14, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP14_MII0_COL MPP( 14, 0xd, 0, 0, 1, 1, 1, 1, 1 )
+
+#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 )
+#define MPP15_SD_D1 MPP( 15, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 )
+#define MPP16_SD_D2 MPP( 16, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_UART0_CTS MPP( 16, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_UART1_RXD MPP( 16, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP16_MII0_CRS MPP( 16, 0xd, 0, 0, 1, 1, 1, 1, 1 )
+
+#define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 )
+#define MPP17_SD_D3 MPP( 17, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP17_TW1_SCK MPP( 17, 0xd, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP18_NF_IO0 MPP( 18, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP19_NF_IO1 MPP( 19, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+
+#define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 )
+#define MPP20_TSMP0 MPP( 20, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP20_AU_SPDIFI MPP( 20, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 )
+#define MPP21_TSMP1 MPP( 21, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 )
+#define MPP22_TSMP2 MPP( 22, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 )
+#define MPP23_TSMP3 MPP( 23, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 )
+#define MPP24_TSMP4 MPP( 24, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 )
+#define MPP25_TSMP5 MPP( 25, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 )
+#define MPP26_TSMP6 MPP( 26, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 )
+#define MPP27_TSMP7 MPP( 27, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP27_AU_I2SDI MPP( 27, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 )
+#define MPP28_TSMP8 MPP( 28, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP28_AU_EXTCLK MPP( 28, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 )
+#define MPP29_TSMP9 MPP( 29, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 )
+#define MPP30_TSMP10 MPP( 30, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP30_TDM_PCLK MPP( 30, 0x2, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 )
+#define MPP31_TSMP11 MPP( 31, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP31_TDM_FS MPP( 31, 0x2, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 )
+#define MPP32_TSMP12 MPP( 32, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP32_TDM_DRX MPP( 32, 0x2, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 )
+#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 )
+#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP35_MII0_RXERR MPP( 35, 0xc, 0, 0, 1, 1, 1, 1, 1 )
+
+#define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 )
+#define MPP36_TSMP0 MPP( 36, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP36_AU_SPDIFI MPP( 36, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP36_TW1_SDA MPP( 36, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 )
+#define MPP37_TSMP1 MPP( 37, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP37_TW1_SCK MPP( 37, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 )
+#define MPP38_TSMP2 MPP( 38, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 )
+#define MPP39_TSMP3 MPP( 39, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 )
+#define MPP40_TSMP4 MPP( 40, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 )
+#define MPP41_TSMP5 MPP( 41, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 )
+#define MPP42_TSMP6 MPP( 42, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 )
+#define MPP43_TSMP7 MPP( 43, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP43_AU_I2SDI MPP( 43, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 )
+#define MPP44_TSMP8 MPP( 44, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP44_AU_EXTCLK MPP( 44, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP45_TSMP9 MPP( 45, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP45_TDM_PCLK MPP( 45, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP46_TSMP10 MPP( 46, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP46_TDM_FS MPP( 46, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP47_TSMP11 MPP( 47, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP47_TDM_DRX MPP( 47, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP48_TSMP12 MPP( 48, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 )
+#define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP49_TSMP9 MPP( 49, 0x1, 0, 0, 0, 0, 0, 1, 0 )
+#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP49_PTP_CLK MPP( 49, 0x5, 0, 0, 0, 0, 0, 1, 0 )
+#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP_MAX 49
+
+void kirkwood_mpp_conf(unsigned int *mpp_list);
+
+#endif
diff -ruN a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c 2018-10-27 18:30:56.014359252 -0600
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+ *
+ * Marvell 88F6281 GTW GE Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/timer.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <net/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_NONE,
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+};
+
+static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
+ .port_names[0] = "lan1",
+ .port_names[1] = "lan2",
+ .port_names[2] = "lan3",
+ .port_names[3] = "lan4",
+ .port_names[4] = "wan",
+ .port_names[5] = "cpu",
+};
+
+static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &mv88f6281gtw_ge_switch_chip_data,
+};
+
+static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = {
+ .type = "mx25l12805d",
+};
+
+static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &mv88f6281gtw_ge_spi_slave_data,
+ .irq = -1,
+ .max_speed_hz = 50000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
+ {
+ .code = KEY_RESTART,
+ .gpio = 47,
+ .desc = "SWR Button",
+ .active_low = 1,
+ }, {
+ .code = KEY_WPS_BUTTON,
+ .gpio = 46,
+ .desc = "WPS Button",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = {
+ .buttons = mv88f6281gtw_ge_button_pins,
+ .nbuttons = ARRAY_SIZE(mv88f6281gtw_ge_button_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &mv88f6281gtw_ge_button_data,
+ },
+};
+
+static struct gpio_led mv88f6281gtw_ge_led_pins[] = {
+ {
+ .name = "gtw:green:Status",
+ .gpio = 20,
+ .active_low = 0,
+ }, {
+ .name = "gtw:red:Status",
+ .gpio = 21,
+ .active_low = 0,
+ }, {
+ .name = "gtw:green:USB",
+ .gpio = 12,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = {
+ .leds = mv88f6281gtw_ge_led_pins,
+ .num_leds = ARRAY_SIZE(mv88f6281gtw_ge_led_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &mv88f6281gtw_ge_led_data,
+ },
+};
+
+static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = {
+ MPP12_GPO, /* Status#_USB pin */
+ MPP20_GPIO, /* Status#_GLED pin */
+ MPP21_GPIO, /* Status#_RLED pin */
+ MPP46_GPIO, /* WPS_Switch pin */
+ MPP47_GPIO, /* SW_Init pin */
+ 0
+};
+
+static void __init mv88f6281gtw_ge_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config);
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
+ kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
+ spi_register_board_info(mv88f6281gtw_ge_spi_slave_info,
+ ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
+ kirkwood_spi_init();
+ kirkwood_uart0_init();
+ platform_device_register(&mv88f6281gtw_ge_leds);
+ platform_device_register(&mv88f6281gtw_ge_buttons);
+}
+
+static int __init mv88f6281gtw_ge_pci_init(void)
+{
+ if (machine_is_mv88f6281gtw_ge())
+ kirkwood_pcie_init(KW_PCIE0);
+
+ return 0;
+}
+subsys_initcall(mv88f6281gtw_ge_pci_init);
+
+MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+ .atag_offset = 0x100,
+ .init_machine = mv88f6281gtw_ge_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/nas6210-setup.c b/arch/arm/mach-kirkwood/nas6210-setup.c
--- a/arch/arm/mach-kirkwood/nas6210-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/nas6210-setup.c 2018-10-27 18:30:56.014359252 -0600
@@ -0,0 +1,186 @@
+/*
+ * arch/arm/mach-kirkwood/nas6210-setup.c
+ *
+ * Raidsonic ICYBOX NAS6210 Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+#define NAS6210_GPIO_POWER_OFF 24
+
+static struct mtd_partition nas6210_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 6*SZ_1M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data nas6210_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data nas6210_sata_data = {
+ .n_ports = 2,
+};
+
+static struct gpio_led nas6210_led_pins[] = {
+ {
+ .name = "status:green:power",
+ .default_trigger = "default-on",
+ .gpio = 25,
+ .active_low = 0,
+ },
+ {
+ .name = "status:red:power",
+ .default_trigger = "none",
+ .gpio = 22,
+ .active_low = 0,
+ },
+ {
+ .name = "status:red:usb_copy",
+ .default_trigger = "none",
+ .gpio = 27,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_led_platform_data nas6210_led_data = {
+ .leds = nas6210_led_pins,
+ .num_leds = ARRAY_SIZE(nas6210_led_pins),
+};
+
+static struct platform_device nas6210_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &nas6210_led_data,
+ }
+};
+
+static struct gpio_keys_button nas6210_buttons[] = {
+ {
+ .code = KEY_COPY,
+ .gpio = 29,
+ .desc = "USB Copy",
+ .active_low = 1,
+ },
+ {
+ .code = KEY_RESTART,
+ .gpio = 28,
+ .desc = "Reset",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data nas6210_button_data = {
+ .buttons = nas6210_buttons,
+ .nbuttons = ARRAY_SIZE(nas6210_buttons),
+};
+
+static struct platform_device nas6210_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &nas6210_button_data,
+ }
+};
+
+static unsigned int nas6210_mpp_config[] __initdata = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP22_GPIO, /* Power LED red */
+ MPP24_GPIO, /* Power off device */
+ MPP25_GPIO, /* Power LED green */
+ MPP27_GPIO, /* USB transfer LED */
+ MPP28_GPIO, /* Reset button */
+ MPP29_GPIO, /* USB Copy button */
+ 0
+};
+
+static void nas6210_power_off(void)
+{
+ gpio_set_value(NAS6210_GPIO_POWER_OFF, 1);
+}
+
+static void __init nas6210_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(nas6210_mpp_config);
+
+ kirkwood_nand_init(ARRAY_AND_SIZE(nas6210_nand_parts), 25);
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&nas6210_ge00_data);
+ kirkwood_sata_init(&nas6210_sata_data);
+ kirkwood_uart0_init();
+ platform_device_register(&nas6210_leds);
+ platform_device_register(&nas6210_button_device);
+ if (gpio_request(NAS6210_GPIO_POWER_OFF, "power-off") == 0 &&
+ gpio_direction_output(NAS6210_GPIO_POWER_OFF, 0) == 0)
+ pm_power_off = nas6210_power_off;
+ else
+ pr_err("nas6210: failed to configure power-off GPIO\n");
+}
+
+static int __init nas6210_pci_init(void)
+{
+ if (machine_is_nas6210()) {
+ u32 dev, rev;
+
+ kirkwood_pcie_id(&dev, &rev);
+ if (dev == MV88F6282_DEV_ID)
+ kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
+ else
+ kirkwood_pcie_init(KW_PCIE0);
+ }
+
+ return 0;
+}
+subsys_initcall(nas6210_pci_init);
+
+MACHINE_START(NAS6210, "RaidSonic ICY BOX IB-NAS6210")
+ /* Maintainer: <gmbnomis at gmail dot com> */
+ .atag_offset = 0x100,
+ .init_machine = nas6210_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c 2018-10-27 18:30:56.014359252 -0600
@@ -0,0 +1,293 @@
+/*
+ * arch/arm/mach-kirkwood/netspace_v2-setup.c
+ *
+ * LaCie Network Space v2 board setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ * Copyright (C) 2009 Benoît Canet <benoit.canet@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <linux/gpio-fan.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
+#include "common.h"
+#include "mpp.h"
+#include "lacie_v2-common.h"
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data netspace_v2_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data netspace_v2_sata_data = {
+ .n_ports = 2,
+};
+
+/*****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define NETSPACE_V2_PUSH_BUTTON 32
+
+static struct gpio_keys_button netspace_v2_buttons[] = {
+ [0] = {
+ .code = KEY_POWER,
+ .gpio = NETSPACE_V2_PUSH_BUTTON,
+ .desc = "Power push button",
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_platform_data netspace_v2_button_data = {
+ .buttons = netspace_v2_buttons,
+ .nbuttons = ARRAY_SIZE(netspace_v2_buttons),
+};
+
+static struct platform_device netspace_v2_gpio_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &netspace_v2_button_data,
+ },
+};
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+#define NETSPACE_V2_GPIO_RED_LED 12
+
+static struct gpio_led netspace_v2_gpio_led_pins[] = {
+ {
+ .name = "ns_v2:red:fail",
+ .gpio = NETSPACE_V2_GPIO_RED_LED,
+ },
+};
+
+static struct gpio_led_platform_data netspace_v2_gpio_leds_data = {
+ .num_leds = ARRAY_SIZE(netspace_v2_gpio_led_pins),
+ .leds = netspace_v2_gpio_led_pins,
+};
+
+static struct platform_device netspace_v2_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &netspace_v2_gpio_leds_data,
+ },
+};
+
+/*****************************************************************************
+ * Dual-GPIO CPLD LEDs
+ ****************************************************************************/
+
+#define NETSPACE_V2_GPIO_BLUE_LED_SLOW 29
+#define NETSPACE_V2_GPIO_BLUE_LED_CMD 30
+
+static struct ns2_led netspace_v2_led_pins[] = {
+ {
+ .name = "ns_v2:blue:sata",
+ .cmd = NETSPACE_V2_GPIO_BLUE_LED_CMD,
+ .slow = NETSPACE_V2_GPIO_BLUE_LED_SLOW,
+ },
+};
+
+static struct ns2_led_platform_data netspace_v2_leds_data = {
+ .num_leds = ARRAY_SIZE(netspace_v2_led_pins),
+ .leds = netspace_v2_led_pins,
+};
+
+static struct platform_device netspace_v2_leds = {
+ .name = "leds-ns2",
+ .id = -1,
+ .dev = {
+ .platform_data = &netspace_v2_leds_data,
+ },
+};
+
+/*****************************************************************************
+ * GPIO fan
+ ****************************************************************************/
+
+/* Designed for fan 40x40x16: ADDA AD0412LB-D50 6000rpm@12v */
+static struct gpio_fan_speed netspace_max_v2_fan_speed[] = {
+ { 0, 0 },
+ { 1500, 15 },
+ { 1700, 14 },
+ { 1800, 13 },
+ { 2100, 12 },
+ { 3100, 11 },
+ { 3300, 10 },
+ { 4300, 9 },
+ { 5500, 8 },
+};
+
+static unsigned netspace_max_v2_fan_ctrl[] = { 22, 7, 33, 23 };
+
+static struct gpio_fan_alarm netspace_max_v2_fan_alarm = {
+ .gpio = 25,
+ .active_low = 1,
+};
+
+static struct gpio_fan_platform_data netspace_max_v2_fan_data = {
+ .num_ctrl = ARRAY_SIZE(netspace_max_v2_fan_ctrl),
+ .ctrl = netspace_max_v2_fan_ctrl,
+ .alarm = &netspace_max_v2_fan_alarm,
+ .num_speed = ARRAY_SIZE(netspace_max_v2_fan_speed),
+ .speed = netspace_max_v2_fan_speed,
+};
+
+static struct platform_device netspace_max_v2_gpio_fan = {
+ .name = "gpio-fan",
+ .id = -1,
+ .dev = {
+ .platform_data = &netspace_max_v2_fan_data,
+ },
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static unsigned int netspace_v2_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP7_GPO, /* Fan speed (bit 1) */
+ MPP8_TW0_SDA,
+ MPP9_TW0_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_GPO, /* Red led */
+ MPP14_GPIO, /* USB fuse */
+ MPP16_GPIO, /* SATA 0 power */
+ MPP17_GPIO, /* SATA 1 power */
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_SATA1_ACTn,
+ MPP21_SATA0_ACTn,
+ MPP22_GPIO, /* Fan speed (bit 0) */
+ MPP23_GPIO, /* Fan power */
+ MPP24_GPIO, /* USB mode select */
+ MPP25_GPIO, /* Fan rotation fail */
+ MPP26_GPIO, /* USB device vbus */
+ MPP28_GPIO, /* USB enable host vbus */
+ MPP29_GPIO, /* Blue led (slow register) */
+ MPP30_GPIO, /* Blue led (command register) */
+ MPP31_GPIO, /* Board power off */
+ MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */
+ MPP33_GPO, /* Fan speed (bit 2) */
+ 0
+};
+
+#define NETSPACE_V2_GPIO_POWER_OFF 31
+
+static void netspace_v2_power_off(void)
+{
+ gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1);
+}
+
+static void __init netspace_v2_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(netspace_v2_mpp_config);
+
+ if (machine_is_netspace_max_v2())
+ lacie_v2_hdd_power_init(2);
+ else
+ lacie_v2_hdd_power_init(1);
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&netspace_v2_ge00_data);
+ kirkwood_sata_init(&netspace_v2_sata_data);
+ kirkwood_uart0_init();
+ lacie_v2_register_flash();
+ lacie_v2_register_i2c_devices();
+
+ platform_device_register(&netspace_v2_leds);
+ platform_device_register(&netspace_v2_gpio_leds);
+ platform_device_register(&netspace_v2_gpio_buttons);
+ if (machine_is_netspace_max_v2())
+ platform_device_register(&netspace_max_v2_gpio_fan);
+
+ if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 &&
+ gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0)
+ pm_power_off = netspace_v2_power_off;
+ else
+ pr_err("netspace_v2: failed to configure power-off GPIO\n");
+}
+
+#ifdef CONFIG_MACH_NETSPACE_V2
+MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
+ .atag_offset = 0x100,
+ .init_machine = netspace_v2_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_INETSPACE_V2
+MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
+ .atag_offset = 0x100,
+ .init_machine = netspace_v2_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_NETSPACE_MAX_V2
+MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
+ .atag_offset = 0x100,
+ .init_machine = netspace_v2_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
+#endif
diff -ruN a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c 2018-10-27 18:30:56.014359252 -0600
@@ -0,0 +1,422 @@
+/*
+ * arch/arm/mach-kirkwood/netxbig_v2-setup.c
+ *
+ * LaCie 2Big and 5Big Network v2 board setup
+ *
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/leds-kirkwood-netxbig.h>
+#include "common.h"
+#include "mpp.h"
+#include "lacie_v2-common.h"
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data netxbig_v2_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data netxbig_v2_sata_data = {
+ .n_ports = 2,
+};
+
+/*****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define NETXBIG_V2_GPIO_SWITCH_POWER_ON 13
+#define NETXBIG_V2_GPIO_SWITCH_POWER_OFF 15
+#define NETXBIG_V2_GPIO_FUNC_BUTTON 34
+
+#define NETXBIG_V2_SWITCH_POWER_ON 0x1
+#define NETXBIG_V2_SWITCH_POWER_OFF 0x2
+
+static struct gpio_keys_button netxbig_v2_buttons[] = {
+ [0] = {
+ .type = EV_SW,
+ .code = NETXBIG_V2_SWITCH_POWER_ON,
+ .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_ON,
+ .desc = "Back power switch (on|auto)",
+ .active_low = 1,
+ },
+ [1] = {
+ .type = EV_SW,
+ .code = NETXBIG_V2_SWITCH_POWER_OFF,
+ .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_OFF,
+ .desc = "Back power switch (auto|off)",
+ .active_low = 1,
+ },
+ [2] = {
+ .code = KEY_OPTION,
+ .gpio = NETXBIG_V2_GPIO_FUNC_BUTTON,
+ .desc = "Function button",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data netxbig_v2_button_data = {
+ .buttons = netxbig_v2_buttons,
+ .nbuttons = ARRAY_SIZE(netxbig_v2_buttons),
+};
+
+static struct platform_device netxbig_v2_gpio_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &netxbig_v2_button_data,
+ },
+};
+
+/*****************************************************************************
+ * GPIO extension LEDs
+ ****************************************************************************/
+
+/*
+ * The LEDs are controlled by a CPLD and can be configured through a GPIO
+ * extension bus:
+ *
+ * - address register : bit [0-2] -> GPIO [47-49]
+ * - data register : bit [0-2] -> GPIO [44-46]
+ * - enable register : GPIO 29
+ */
+
+static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
+static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
+
+static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
+ .addr = netxbig_v2_gpio_ext_addr,
+ .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
+ .data = netxbig_v2_gpio_ext_data,
+ .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data),
+ .enable = 29,
+};
+
+/*
+ * Address register selection:
+ *
+ * addr | register
+ * ----------------------------
+ * 0 | front LED
+ * 1 | front LED brightness
+ * 2 | SATA LED brightness
+ * 3 | SATA0 LED
+ * 4 | SATA1 LED
+ * 5 | SATA2 LED
+ * 6 | SATA3 LED
+ * 7 | SATA4 LED
+ *
+ * Data register configuration:
+ *
+ * data | LED brightness
+ * -------------------------------------------------
+ * 0 | min (off)
+ * - | -
+ * 7 | max
+ *
+ * data | front LED mode
+ * -------------------------------------------------
+ * 0 | fix off
+ * 1 | fix blue on
+ * 2 | fix red on
+ * 3 | blink blue on=1 sec and blue off=1 sec
+ * 4 | blink red on=1 sec and red off=1 sec
+ * 5 | blink blue on=2.5 sec and red on=0.5 sec
+ * 6 | blink blue on=1 sec and red on=1 sec
+ * 7 | blink blue on=0.5 sec and blue off=2.5 sec
+ *
+ * data | SATA LED mode
+ * -------------------------------------------------
+ * 0 | fix off
+ * 1 | SATA activity blink
+ * 2 | fix red on
+ * 3 | blink blue on=1 sec and blue off=1 sec
+ * 4 | blink red on=1 sec and red off=1 sec
+ * 5 | blink blue on=2.5 sec and red on=0.5 sec
+ * 6 | blink blue on=1 sec and red on=1 sec
+ * 7 | fix blue on
+ */
+
+static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
+ [NETXBIG_LED_OFF] = 0,
+ [NETXBIG_LED_ON] = 2,
+ [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
+ [NETXBIG_LED_TIMER1] = 4,
+ [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
+};
+
+static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
+ [NETXBIG_LED_OFF] = 0,
+ [NETXBIG_LED_ON] = 1,
+ [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
+ [NETXBIG_LED_TIMER1] = 3,
+ [NETXBIG_LED_TIMER2] = 7,
+};
+
+static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
+ [NETXBIG_LED_OFF] = 0,
+ [NETXBIG_LED_ON] = 7,
+ [NETXBIG_LED_SATA] = 1,
+ [NETXBIG_LED_TIMER1] = 3,
+ [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
+};
+
+static struct netxbig_led_timer netxbig_v2_led_timer[] = {
+ [0] = {
+ .delay_on = 500,
+ .delay_off = 500,
+ .mode = NETXBIG_LED_TIMER1,
+ },
+ [1] = {
+ .delay_on = 500,
+ .delay_off = 1000,
+ .mode = NETXBIG_LED_TIMER2,
+ },
+};
+
+#define NETXBIG_LED(_name, maddr, mval, baddr) \
+ { .name = _name, \
+ .mode_addr = maddr, \
+ .mode_val = mval, \
+ .bright_addr = baddr }
+
+static struct netxbig_led net2big_v2_leds_ctrl[] = {
+ NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
+ NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1),
+ NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
+};
+
+static struct netxbig_led_platform_data net2big_v2_leds_data = {
+ .gpio_ext = &netxbig_v2_gpio_ext,
+ .timer = netxbig_v2_led_timer,
+ .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
+ .leds = net2big_v2_leds_ctrl,
+ .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl),
+};
+
+static struct netxbig_led net5big_v2_leds_ctrl[] = {
+ NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
+ NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1),
+ NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata5", 7, netxbig_v2_red_mled, 2),
+};
+
+static struct netxbig_led_platform_data net5big_v2_leds_data = {
+ .gpio_ext = &netxbig_v2_gpio_ext,
+ .timer = netxbig_v2_led_timer,
+ .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
+ .leds = net5big_v2_leds_ctrl,
+ .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl),
+};
+
+static struct platform_device netxbig_v2_leds = {
+ .name = "leds-netxbig",
+ .id = -1,
+ .dev = {
+ .platform_data = &net2big_v2_leds_data,
+ },
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static unsigned int net2big_v2_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP6_SYSRST_OUTn,
+ MPP7_GPO, /* Request power-off */
+ MPP8_TW0_SDA,
+ MPP9_TW0_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP13_GPIO, /* Rear power switch (on|auto) */
+ MPP14_GPIO, /* USB fuse alarm */
+ MPP15_GPIO, /* Rear power switch (auto|off) */
+ MPP16_GPIO, /* SATA HDD1 power */
+ MPP17_GPIO, /* SATA HDD2 power */
+ MPP20_SATA1_ACTn,
+ MPP21_SATA0_ACTn,
+ MPP24_GPIO, /* USB mode select */
+ MPP26_GPIO, /* USB device vbus */
+ MPP28_GPIO, /* USB enable host vbus */
+ MPP29_GPIO, /* GPIO extension ALE */
+ MPP34_GPIO, /* Rear Push button */
+ MPP35_GPIO, /* Inhibit switch power-off */
+ MPP36_GPIO, /* SATA HDD1 presence */
+ MPP37_GPIO, /* SATA HDD2 presence */
+ MPP40_GPIO, /* eSATA presence */
+ MPP44_GPIO, /* GPIO extension (data 0) */
+ MPP45_GPIO, /* GPIO extension (data 1) */
+ MPP46_GPIO, /* GPIO extension (data 2) */
+ MPP47_GPIO, /* GPIO extension (addr 0) */
+ MPP48_GPIO, /* GPIO extension (addr 1) */
+ MPP49_GPIO, /* GPIO extension (addr 2) */
+ 0
+};
+
+static unsigned int net5big_v2_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP6_SYSRST_OUTn,
+ MPP7_GPO, /* Request power-off */
+ MPP8_TW0_SDA,
+ MPP9_TW0_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP13_GPIO, /* Rear power switch (on|auto) */
+ MPP14_GPIO, /* USB fuse alarm */
+ MPP15_GPIO, /* Rear power switch (auto|off) */
+ MPP16_GPIO, /* SATA HDD1 power */
+ MPP17_GPIO, /* SATA HDD2 power */
+ MPP20_GE1_TXD0,
+ MPP21_GE1_TXD1,
+ MPP22_GE1_TXD2,
+ MPP23_GE1_TXD3,
+ MPP24_GE1_RXD0,
+ MPP25_GE1_RXD1,
+ MPP26_GE1_RXD2,
+ MPP27_GE1_RXD3,
+ MPP28_GPIO, /* USB enable host vbus */
+ MPP29_GPIO, /* GPIO extension ALE */
+ MPP30_GE1_RXCTL,
+ MPP31_GE1_RXCLK,
+ MPP32_GE1_TCLKOUT,
+ MPP33_GE1_TXCTL,
+ MPP34_GPIO, /* Rear Push button */
+ MPP35_GPIO, /* Inhibit switch power-off */
+ MPP36_GPIO, /* SATA HDD1 presence */
+ MPP37_GPIO, /* SATA HDD2 presence */
+ MPP38_GPIO, /* SATA HDD3 presence */
+ MPP39_GPIO, /* SATA HDD4 presence */
+ MPP40_GPIO, /* SATA HDD5 presence */
+ MPP41_GPIO, /* SATA HDD3 power */
+ MPP42_GPIO, /* SATA HDD4 power */
+ MPP43_GPIO, /* SATA HDD5 power */
+ MPP44_GPIO, /* GPIO extension (data 0) */
+ MPP45_GPIO, /* GPIO extension (data 1) */
+ MPP46_GPIO, /* GPIO extension (data 2) */
+ MPP47_GPIO, /* GPIO extension (addr 0) */
+ MPP48_GPIO, /* GPIO extension (addr 1) */
+ MPP49_GPIO, /* GPIO extension (addr 2) */
+ 0
+};
+
+#define NETXBIG_V2_GPIO_POWER_OFF 7
+
+static void netxbig_v2_power_off(void)
+{
+ gpio_set_value(NETXBIG_V2_GPIO_POWER_OFF, 1);
+}
+
+static void __init netxbig_v2_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ if (machine_is_net2big_v2())
+ kirkwood_mpp_conf(net2big_v2_mpp_config);
+ else
+ kirkwood_mpp_conf(net5big_v2_mpp_config);
+
+ if (machine_is_net2big_v2())
+ lacie_v2_hdd_power_init(2);
+ else
+ lacie_v2_hdd_power_init(5);
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&netxbig_v2_ge00_data);
+ if (machine_is_net5big_v2())
+ kirkwood_ge01_init(&netxbig_v2_ge01_data);
+ kirkwood_sata_init(&netxbig_v2_sata_data);
+ kirkwood_uart0_init();
+ lacie_v2_register_flash();
+ lacie_v2_register_i2c_devices();
+
+ if (machine_is_net5big_v2())
+ netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
+ platform_device_register(&netxbig_v2_leds);
+ platform_device_register(&netxbig_v2_gpio_buttons);
+
+ if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 &&
+ gpio_direction_output(NETXBIG_V2_GPIO_POWER_OFF, 0) == 0)
+ pm_power_off = netxbig_v2_power_off;
+ else
+ pr_err("netxbig_v2: failed to configure power-off GPIO\n");
+}
+
+#ifdef CONFIG_MACH_NET2BIG_V2
+MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
+ .atag_offset = 0x100,
+ .init_machine = netxbig_v2_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_NET5BIG_V2
+MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
+ .atag_offset = 0x100,
+ .init_machine = netxbig_v2_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
+#endif
diff -ruN a/arch/arm/mach-kirkwood/nsa310-setup.c b/arch/arm/mach-kirkwood/nsa310-setup.c
--- a/arch/arm/mach-kirkwood/nsa310-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/nsa310-setup.c 2018-10-27 18:30:56.014359252 -0600
@@ -0,0 +1,359 @@
+/*
+ * arch/arm/mach-kirkwood/nsa310-setup.c
+ *
+ * Zyxel NSA-310 Setup, by AA666 and Peeter123
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/mtd/partitions.h>
+#include <mtd/mtd-abi.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include <plat/orion-gpio.h>
+#include "common.h"
+#include "mpp.h"
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+
+static void nsa310_timerfunc(unsigned long data);
+static DEFINE_TIMER(timer, nsa310_timerfunc, 0, 0);
+
+static struct mtd_partition nsa310_nand_parts[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = 0x100000,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "uboot_env",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0x80000
+ }, {
+ .name = "key_store",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0x80000
+ }, {
+ .name = "info",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0x80000
+ }, {
+ .name = "etc",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0xA00000
+ }, {
+ .name = "kernel_1",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0xA00000
+ }, {
+ .name = "rootfs1",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0x2FC0000
+ }, {
+ .name = "kernel_2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0xA00000
+ }, {
+ .name = "rootfs2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0x2FC0000
+ },
+};
+
+static struct i2c_board_info __initdata nsa310_i2c_rtc = {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+};
+
+static struct mv643xx_eth_platform_data nsa310_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+};
+
+static struct mv_sata_platform_data nsa310_sata_data = {
+ .n_ports = 2,
+};
+
+static unsigned int nsa310_mpp_config[] __initdata = {
+ MPP36_GPIO, // Reset button
+ MPP37_GPIO, // Copy button
+ MPP46_GPIO, // Power button
+
+ MPP48_GPIO, // Power Off
+ MPP21_GPIO, // USB Power Off
+
+ MPP28_GPIO, // Sys LED Green
+ MPP29_GPIO, // Sys LED Yellow
+ MPP41_GPIO, // SATA1 LED Green
+ MPP42_GPIO, // SATA1 LED Red
+ MPP12_GPO, // SATA2 LED Green
+ MPP13_GPIO, // SATA2 LED Red
+ MPP39_GPIO, // Copy LED Green
+ MPP40_GPIO, // Copy LED Red
+ MPP15_GPIO, // USB LED Green
+
+ MPP14_GPIO, // MCU Data
+ MPP16_GPIO, // MCU Clk
+ MPP17_GPIO, // MCU Act
+
+ MPP38_GPIO, // VID B0
+ MPP45_GPIO, // VID B1
+
+ MPP44_GPIO, // Buzzer
+ MPP43_GPIO, // HTP
+
+ MPP47_GPIO, // Power Resume Data
+ MPP49_GPIO, // Power Resume Clock
+
+ 0
+};
+
+static struct gpio_led nsa310_gpio_led[] = {
+ {
+ .name = "nsa310:green:System",
+ .default_trigger = "timer",
+ .gpio = 28,
+ .active_low = 0,
+
+ },
+ {
+ .name = "nsa310:red:System",
+ .default_trigger = "none",
+ .gpio = 29,
+ .active_low = 0,
+ },
+ {
+ .name = "nsa310:green:SATA1",
+ .default_trigger = "none",
+ .gpio = 41,
+ .active_low = 0,
+ },
+ {
+ .name = "nsa310:red:SATA1",
+ .default_trigger = "sata-disk",
+ .gpio = 42,
+ .active_low = 0,
+ },
+ {
+ .name = "nsa310:green:SATA2",
+ .default_trigger = "none",
+ .gpio = 12,
+ .active_low = 0,
+ },
+ {
+ .name = "nsa310:red:SATA2",
+ .default_trigger = "none",
+ .gpio = 13,
+ .active_low = 0,
+ },
+ {
+ .name = "nsa310:green:USB",
+ .default_trigger = "none",
+ .gpio = 15,
+ .active_low = 0,
+ },
+ {
+ .name = "nsa310:green:Copy",
+ .default_trigger = "none",
+ .gpio = 39,
+ .active_low = 0,
+ },
+ {
+ .name = "nsa310:red:Copy",
+ .default_trigger = "none",
+ .gpio = 40,
+ .active_low = 0,
+ },
+};
+
+
+static int nsa310_gpio_blink_set(unsigned gpio, int state,
+ unsigned long *delay_on, unsigned long *delay_off)
+{
+
+// Use hardware acceleration
+// if (delay_on && delay_off && !*delay_on && !*delay_off)
+// *delay_on = *delay_off = 100;
+
+ switch(state) {
+ case GPIO_LED_NO_BLINK_LOW:
+ case GPIO_LED_NO_BLINK_HIGH:
+ orion_gpio_set_blink(gpio, 0);
+ gpio_set_value(gpio, state);
+ break;
+ case GPIO_LED_BLINK:
+ orion_gpio_set_blink(gpio, 1);
+ break;
+ }
+ return 0;
+}
+
+
+static struct gpio_led_platform_data nsa310_led_data = {
+ .leds = nsa310_gpio_led,
+ .num_leds = ARRAY_SIZE(nsa310_gpio_led),
+ .gpio_blink_set = nsa310_gpio_blink_set,
+};
+
+static struct platform_device nsa310_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = { .platform_data = &nsa310_led_data, }
+};
+
+static struct gpio_keys_button nsa310_gpio_keys_button[] = {
+ {
+ .code = KEY_POWER,
+ .type = EV_KEY,
+ .gpio = 46,
+ .desc = "Power Button",
+ .active_low = 0,
+ .debounce_interval = 1000,
+ },
+ {
+ .code = KEY_COPY,
+ .type = EV_KEY,
+ .gpio = 37,
+ .desc = "USB Copy",
+ .active_low = 1,
+ .debounce_interval = 1000,
+ },
+ {
+ .code = KEY_OPTION,
+ .type = EV_KEY,
+ .gpio = 36,
+ .desc = "Reset",
+ .active_low = 1,
+ .debounce_interval = 1000,
+ },
+};
+
+static struct gpio_keys_platform_data nsa310_keys_data = {
+ .buttons = nsa310_gpio_keys_button,
+ .nbuttons = ARRAY_SIZE(nsa310_gpio_keys_button),
+};
+
+
+static struct platform_device nsa310_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = { .platform_data = &nsa310_keys_data, }
+};
+
+static void nsa310_power_off(void)
+{
+//
+//don't work with sysfs
+ printk(KERN_INFO "Activating power off GPIO pin...\n");
+ gpio_set_value(48, 1);
+
+// If machine goes to restart, uncomment next lines for infinite loop
+/* printk(KERN_INFO "System halted, please turn off power manually\n");
+ gpio_set_value(28, 0);
+ do {
+ mdelay(1000);
+ } while(1);
+*/
+}
+
+static void nsa310_timerfunc(unsigned long data)
+{
+// Activate USB Power
+ if (gpio_request(21, "USB Power") != 0 || gpio_direction_output(21, 1) != 0)
+ printk(KERN_ERR "failed to setup USB power GPIO\n");
+ else
+ printk(KERN_INFO "USB power enabled\n");
+ gpio_free(21);
+}
+
+static void __init nsa310_init(void)
+{
+ u32 dev, rev;
+
+ kirkwood_init();
+
+ kirkwood_mpp_conf(nsa310_mpp_config);
+ kirkwood_nand_init(ARRAY_AND_SIZE(nsa310_nand_parts), 25);
+ kirkwood_ge00_init(&nsa310_ge00_data);
+ kirkwood_pcie_id(&dev, &rev);
+
+ kirkwood_sata_init(&nsa310_sata_data);
+ kirkwood_uart0_init();
+ kirkwood_i2c_init();
+ i2c_register_board_info(0, &nsa310_i2c_rtc, 1);
+
+ platform_device_register(&nsa310_leds);
+ platform_device_register(&nsa310_buttons);
+
+ kirkwood_ehci_init();
+// USB Power delay for 20 sec
+ timer.function = nsa310_timerfunc;
+ timer.data = 0;
+ timer.expires = jiffies + msecs_to_jiffies(20000);
+ add_timer(&timer);
+
+
+/* Power resume control */
+ gpio_request(49, "Power-clk");
+ gpio_direction_output(49, 1);
+ gpio_request(47, "Power-data");
+// Clear power resume
+// gpio_direction_output(47, 0);
+// Set power resume
+ gpio_direction_output(47, 1);
+ udelay(1000);
+// gpio_direction_output(49, 0);
+ gpio_set_value(49, 0);
+// release GPIO?
+//test
+ gpio_free(47);
+ gpio_free(49);
+ printk(KERN_INFO "Power resume enabled\n");
+
+
+// Activate Power-off GPIO
+ if (gpio_request(48, "Power-off") == 0 && gpio_direction_output(48, 0) == 0) {
+// gpio_free(48);
+ pm_power_off = nsa310_power_off;
+ printk(KERN_INFO "Power-off GPIO enabled\n");
+ } else
+ printk(KERN_ERR "failed to configure Power-off GPIO\n");
+
+};
+
+static int __init nsa310_pci_init(void)
+{
+ if (machine_is_nsa310())
+ kirkwood_pcie_init(KW_PCIE0);
+ return 0;
+}
+
+subsys_initcall(nsa310_pci_init);
+
+MACHINE_START(NSA310, "Zyxel NSA-310")
+ .atag_offset = 0x100,
+ .init_machine = nsa310_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/nsa320-setup.c b/arch/arm/mach-kirkwood/nsa320-setup.c
--- a/arch/arm/mach-kirkwood/nsa320-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/nsa320-setup.c 2018-10-27 18:30:56.018359231 -0600
@@ -0,0 +1,305 @@
+/*
+ * arch/arm/mach-kirkwood/nsa320-setup.c
+ *
+ * ZyXEL NSA320 2-Bay Power Media Server Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/nsa3xx-hwmon.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/orion-gpio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition nsa320_nand_parts[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = SZ_1M,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "uboot_env",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_512K
+ }, {
+ .name = "key_store",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_512K
+ }, {
+ .name = "info",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_512K
+ }, {
+ .name = "etc",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 10 * SZ_1M
+ }, {
+ .name = "kernel_1",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 10 * SZ_1M
+ }, {
+ .name = "rootfs1",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 48 * SZ_1M - SZ_256K
+ }, {
+ .name = "kernel_2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 10 * SZ_1M
+ }, {
+ .name = "rootfs2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 48 * SZ_1M - SZ_256K
+ },
+};
+
+static struct i2c_board_info __initdata nsa320_i2c_rtc = {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+};
+
+static struct mv643xx_eth_platform_data nsa320_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv_sata_platform_data nsa320_sata_data = {
+ .n_ports = 2,
+};
+
+static struct gpio_keys_button nsa320_button_pins[] = {
+ {
+ .code = KEY_RESTART,
+ .gpio = 36,
+ .desc = "Reset",
+ .active_low = 1,
+ .debounce_interval = 1000,
+ }, {
+ .code = KEY_COPY,
+ .gpio = 37,
+ .desc = "Copy",
+ .active_low = 1,
+ .debounce_interval = 1000,
+ }, {
+ .code = KEY_POWER,
+ .gpio = 46,
+ .desc = "Power",
+ .active_low = 0,
+ .debounce_interval = 1000,
+ },
+};
+
+static struct gpio_keys_platform_data nsa320_button_data = {
+ .buttons = nsa320_button_pins,
+ .nbuttons = ARRAY_SIZE(nsa320_button_pins),
+};
+
+static struct platform_device nsa320_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &nsa320_button_data,
+ },
+};
+
+static struct gpio_led nsa320_led_pins[] = {
+ {
+ .name = "nsa320:green:hdd2",
+ .default_trigger = "ide-disk2",
+ .gpio = 12,
+ .active_low = 0,
+ }, {
+ .name = "nsa320:red:hdd2",
+ .default_trigger = "default-off",
+ .gpio = 13,
+ .active_low = 0,
+ }, {
+ .name = "nsa320:green:usb",
+ .default_trigger = "default-off",
+ .gpio = 15,
+ .active_low = 0,
+ }, {
+ .name = "nsa320:green:sys",
+ .default_trigger = "default-off",
+ .gpio = 28,
+ .active_low = 0,
+ }, {
+ .name = "nsa320:orange:sys",
+ .default_trigger = "default-on",
+ .gpio = 29,
+ .active_low = 0,
+ }, {
+ .name = "nsa320:green:copy",
+ .default_trigger = "default-off",
+ .gpio = 39,
+ .active_low = 0,
+ }, {
+ .name = "nsa320:red:copy",
+ .default_trigger = "default-off",
+ .gpio = 40,
+ .active_low = 0,
+ }, {
+ .name = "nsa320:green:hdd1",
+ .default_trigger = "ide-disk1",
+ .gpio = 41,
+ .active_low = 0,
+ }, {
+ .name = "nsa320:red:hdd1",
+ .default_trigger = "default-off",
+ .gpio = 42,
+ .active_low = 0,
+ },
+};
+
+static int nsa320_gpio_blink_set(unsigned gpio, int state,
+ unsigned long *delay_on, unsigned long *delay_off)
+{
+ switch(state) {
+ case GPIO_LED_NO_BLINK_LOW:
+ case GPIO_LED_NO_BLINK_HIGH:
+ orion_gpio_set_blink(gpio, 0);
+ gpio_set_value(gpio, state);
+ break;
+ case GPIO_LED_BLINK:
+ orion_gpio_set_blink(gpio, 1);
+ break;
+ }
+ return 0;
+}
+
+static struct gpio_led_platform_data nsa320_led_data = {
+ .leds = nsa320_led_pins,
+ .num_leds = ARRAY_SIZE(nsa320_led_pins),
+ .gpio_blink_set = nsa320_gpio_blink_set,
+};
+
+static struct platform_device nsa320_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &nsa320_led_data,
+ },
+};
+
+static struct nsa3xx_hwmon_platform_data nsa320_hwmon_data = {
+ /* GPIOs connected to Holtek HT46R065 MCU */
+ .act_pin = 17,
+ .clk_pin = 16,
+ .data_pin = 14,
+};
+
+static struct platform_device nsa320_hwmon = {
+ .name = "nsa3xx-hwmon",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &nsa320_hwmon_data,
+ },
+};
+
+static unsigned int nsa320_mpp_config[] __initdata = {
+ MPP8_TW0_SDA, /* PCF8563 RTC chip */
+ MPP9_TW0_SCK, /* connected to TWSI */
+ MPP12_GPO, /* HDD2 LED (green) */
+ MPP13_GPIO, /* HDD2 LED (red) */
+ MPP14_GPIO, /* MCU DATA pin (in) */
+ MPP15_GPIO, /* USB LED (green) */
+ MPP16_GPIO, /* MCU CLK pin (out) */
+ MPP17_GPIO, /* MCU ACT pin (out) */
+ MPP21_GPIO, /* USB power */
+ MPP28_GPIO, /* SYS LED (green) */
+ MPP29_GPIO, /* SYS LED (orange) */
+ MPP36_GPIO, /* reset button */
+ MPP37_GPIO, /* copy button */
+ MPP38_GPIO, /* VID B0 */
+ MPP39_GPIO, /* COPY LED (green) */
+ MPP40_GPIO, /* COPY LED (red) */
+ MPP41_GPIO, /* HDD1 LED (green) */
+ MPP42_GPIO, /* HDD1 LED (red) */
+ MPP43_GPIO, /* HTP pin */
+ MPP44_GPIO, /* buzzer */
+ MPP45_GPIO, /* VID B1 */
+ MPP46_GPIO, /* power button */
+ MPP47_GPIO, /* power resume data */
+ MPP48_GPIO, /* power off */
+ MPP49_GPIO, /* power resume clock */
+ 0
+};
+
+#define NSA320_GPIO_USB_POWER 21
+#define NSA320_GPIO_POWER_OFF 48
+
+static void nsa320_power_off(void)
+{
+ gpio_set_value(NSA320_GPIO_POWER_OFF, 1);
+}
+
+static int __initdata usb_power = 1; /* default "on" */
+
+static int __init nsa320_usb_power(char *str)
+{
+ usb_power = strncmp(str, "off", 3) ? 1 : 0;
+ return 1;
+}
+/* Parse boot_command_line string nsa320_usb_power=on|off */
+__setup("nsa320_usb_power=", nsa320_usb_power);
+
+static void __init nsa320_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ kirkwood_mpp_conf(nsa320_mpp_config);
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(nsa320_nand_parts), 40);
+ kirkwood_ge00_init(&nsa320_ge00_data);
+ kirkwood_sata_init(&nsa320_sata_data);
+
+ platform_device_register(&nsa320_leds);
+ platform_device_register(&nsa320_buttons);
+ platform_device_register(&nsa320_hwmon);
+
+ kirkwood_i2c_init();
+ i2c_register_board_info(0, &nsa320_i2c_rtc, 1);
+
+ if (gpio_request(NSA320_GPIO_USB_POWER, "USB Power Enable") ||
+ gpio_direction_output(NSA320_GPIO_USB_POWER, usb_power))
+ pr_err("nsa320: failed to configure USB power enable GPIO\n");
+ gpio_free(NSA320_GPIO_USB_POWER);
+
+ kirkwood_ehci_init();
+
+ if (gpio_request(NSA320_GPIO_POWER_OFF, "power-off") ||
+ gpio_direction_output(NSA320_GPIO_POWER_OFF, 0))
+ pr_err("nsa320: failed to configure power-off GPIO\n");
+ else
+ pm_power_off = nsa320_power_off;
+}
+
+MACHINE_START(NSA320, "ZyXEL NSA320 2-Bay Power Media Server")
+ /* Maintainer: Peter Schildmann <linux@schildmann.info> */
+ .atag_offset = 0x100,
+ .init_machine = nsa320_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/nsa325-setup.c b/arch/arm/mach-kirkwood/nsa325-setup.c
--- a/arch/arm/mach-kirkwood/nsa325-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/nsa325-setup.c 2018-10-27 18:30:56.018359231 -0600
@@ -0,0 +1,359 @@
+/*
+ * arch/arm/mach-kirkwood/nsa325-setup.c
+ *
+ * ZyXEL NSA325 2-Bay Power Media Server Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/phy.h>
+#include <linux/marvell_phy.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <linux/pci.h>
+#include <linux/input.h>
+#include <linux/nsa3xx-hwmon.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/orion-gpio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition nsa325_nand_parts[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = SZ_1M,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "uboot_env",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_512K
+ }, {
+ .name = "key_store",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_512K
+ }, {
+ .name = "info",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_512K
+ }, {
+ .name = "etc",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 10 * SZ_1M
+ }, {
+ .name = "kernel_1",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 10 * SZ_1M
+ }, {
+ .name = "rootfs1",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 48 * SZ_1M - SZ_256K
+ }, {
+ .name = "kernel_2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 10 * SZ_1M
+ }, {
+ .name = "rootfs2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 48 * SZ_1M - SZ_256K
+ },
+};
+
+static struct i2c_board_info __initdata nsa325_i2c_rtc = {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+};
+
+static struct mv643xx_eth_platform_data nsa325_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv_sata_platform_data nsa325_sata_data = {
+ .n_ports = 2,
+};
+
+static struct gpio_keys_button nsa325_button_pins[] = {
+ {
+ .code = KEY_RESTART,
+ .gpio = 36,
+ .desc = "Reset",
+ .active_low = 1,
+ .debounce_interval = 1000,
+ }, {
+ .code = KEY_COPY,
+ .gpio = 37,
+ .desc = "Copy",
+ .active_low = 1,
+ .debounce_interval = 1000,
+ }, {
+ .code = KEY_POWER,
+ .gpio = 46,
+ .desc = "Power",
+ .active_low = 0,
+ .debounce_interval = 1000,
+ },
+};
+
+static struct gpio_keys_platform_data nsa325_button_data = {
+ .buttons = nsa325_button_pins,
+ .nbuttons = ARRAY_SIZE(nsa325_button_pins),
+};
+
+static struct platform_device nsa325_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &nsa325_button_data,
+ },
+};
+
+static struct gpio_led nsa325_led_pins[] = {
+ {
+ .name = "nsa325:green:hdd2",
+ .default_trigger = "ide-disk2",
+ .gpio = 12,
+ .active_low = 0,
+ }, {
+ .name = "nsa325:red:hdd2",
+ .default_trigger = "default-off",
+ .gpio = 13,
+ .active_low = 0,
+ }, {
+ .name = "nsa325:green:usb",
+ .default_trigger = "usb-host",
+ .gpio = 15,
+ .active_low = 0,
+ }, {
+ .name = "nsa325:green:sys",
+ .default_trigger = "default-off",
+ .gpio = 28,
+ .active_low = 0,
+ }, {
+ .name = "nsa325:orange:sys",
+ .default_trigger = "default-on",
+ .gpio = 29,
+ .active_low = 0,
+ }, {
+ .name = "nsa325:green:copy",
+ .default_trigger = "default-off",
+ .gpio = 39,
+ .active_low = 0,
+ }, {
+ .name = "nsa325:red:copy",
+ .default_trigger = "default-off",
+ .gpio = 40,
+ .active_low = 0,
+ }, {
+ .name = "nsa325:green:hdd1",
+ .default_trigger = "ide-disk1",
+ .gpio = 41,
+ .active_low = 0,
+ }, {
+ .name = "nsa325:red:hdd1",
+ .default_trigger = "default-off",
+ .gpio = 42,
+ .active_low = 0,
+ },
+};
+
+static int nsa325_gpio_blink_set(unsigned gpio, int state,
+ unsigned long *delay_on, unsigned long *delay_off)
+{
+ switch(state) {
+ case GPIO_LED_NO_BLINK_LOW:
+ case GPIO_LED_NO_BLINK_HIGH:
+ orion_gpio_set_blink(gpio, 0);
+ gpio_set_value(gpio, state);
+ break;
+ case GPIO_LED_BLINK:
+ orion_gpio_set_blink(gpio, 1);
+ break;
+ }
+ return 0;
+}
+
+static struct gpio_led_platform_data nsa325_led_data = {
+ .leds = nsa325_led_pins,
+ .num_leds = ARRAY_SIZE(nsa325_led_pins),
+ .gpio_blink_set = nsa325_gpio_blink_set,
+};
+
+static struct platform_device nsa325_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &nsa325_led_data,
+ },
+};
+
+static struct nsa3xx_hwmon_platform_data nsa325_hwmon_data = {
+ /* GPIOs connected to Holtek HT46R065 MCU */
+ .act_pin = 17,
+ .clk_pin = 16,
+ .data_pin = 14,
+};
+
+static struct platform_device nsa325_hwmon = {
+ .name = "nsa3xx-hwmon",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &nsa325_hwmon_data,
+ },
+};
+
+static unsigned int nsa325_mpp_config[] __initdata = {
+ MPP8_TW0_SDA, /* PCF8563 RTC chip */
+ MPP9_TW0_SCK, /* connected to TWSI */
+ MPP12_GPO, /* HDD2 LED (green) */
+ MPP13_GPIO, /* ? HDD2 LED (red) ? */
+ MPP14_GPIO, /* MCU DATA pin (in) */
+ MPP15_GPIO, /* USB LED (green) */
+ MPP16_GPIO, /* MCU CLK pin (out) */
+ MPP17_GPIO, /* MCU ACT pin (out) */
+ MPP21_GPIO, /* USB power */
+ MPP28_GPIO, /* SYS LED (green) */
+ MPP29_GPIO, /* SYS LED (orange) */
+ MPP36_GPIO, /* reset button */
+ MPP37_GPIO, /* copy button */
+ MPP38_GPIO, /* VID B0 */
+ MPP39_GPIO, /* COPY LED (green) */
+ MPP40_GPIO, /* COPY LED (red) */
+ MPP41_GPIO, /* HDD1 LED (green) */
+ MPP42_GPIO, /* HDD1 LED (red) */
+ MPP43_GPIO, /* HTP pin */
+ MPP44_GPIO, /* buzzer */
+ MPP45_GPIO, /* VID B1 */
+ MPP46_GPIO, /* power button */
+ MPP47_GPIO, /* HDD2 power */
+ MPP48_GPIO, /* power off */
+ 0
+};
+
+#define NSA325_GPIO_WATCHDOG 14
+#define NSA325_GPIO_USB_POWER 21
+#define NSA325_GPIO_HDD2_POWER 47
+#define NSA325_GPIO_POWER_OFF 48
+
+static void nsa325_power_off(void)
+{
+ gpio_set_value(NSA325_GPIO_POWER_OFF, 1);
+}
+
+static int __initdata usb_power = 1; /* default "on" */
+
+static int __init nsa325_usb_power(char *str)
+{
+ usb_power = strncmp(str, "off", 3) ? 1 : 0;
+ return 1;
+}
+/* Parse boot_command_line string nsa325_usb_power=on|off */
+__setup("nsa325_usb_power=", nsa325_usb_power);
+
+/* the nsa325 uses the 88E1310S Alaska, and has an MCU attached to the LED[2] via tristate interrupt */
+static int nsa325_phy_fixup(struct phy_device *phydev)
+{
+ int err;
+ int temp;
+ /* go to page 3 */
+ err = phy_write(phydev, 22, 3);
+ if (err < 0)
+ return err;
+ /* read page 3, register 17 */
+ temp = phy_read(phydev, 17);
+ /* clear bit 4, set bit 5 */
+ temp &= ~(1<<4);
+ temp |= (1<<5);
+ /* write page 3, register 17 */
+ err = phy_write(phydev, 17, temp);
+ if (err < 0)
+ return err;
+ /* go to page 0 */
+ err = phy_write(phydev, 22, 0);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static void __init nsa325_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ kirkwood_mpp_conf(nsa325_mpp_config);
+
+ /* setup the phy fixup */
+ phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1318S,MARVELL_PHY_ID_MASK,nsa325_phy_fixup);
+ kirkwood_ge00_init(&nsa325_ge00_data);
+
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(nsa325_nand_parts), 40);
+
+ /* turn off the watchdog */
+ gpio_set_value(NSA325_GPIO_WATCHDOG, 1);
+
+ /* turn on the second drive bay */
+ if (gpio_request(NSA325_GPIO_HDD2_POWER, "HDD2 Power Enable") ||
+ gpio_direction_output(NSA325_GPIO_HDD2_POWER,1))
+ pr_err("nsa325: failed to configure HDD2 power enable GPIO\n");
+ gpio_free(NSA325_GPIO_HDD2_POWER);
+
+ kirkwood_sata_init(&nsa325_sata_data);
+
+ platform_device_register(&nsa325_leds);
+ platform_device_register(&nsa325_buttons);
+ platform_device_register(&nsa325_hwmon);
+
+ kirkwood_i2c_init();
+ i2c_register_board_info(0, &nsa325_i2c_rtc, 1);
+
+ if (gpio_request(NSA325_GPIO_USB_POWER, "USB Power Enable") ||
+ gpio_direction_output(NSA325_GPIO_USB_POWER, usb_power))
+ pr_err("nsa325: failed to configure USB power enable GPIO\n");
+ gpio_free(NSA325_GPIO_USB_POWER);
+
+ kirkwood_ehci_init();
+
+ if (gpio_request(NSA325_GPIO_POWER_OFF, "power-off") ||
+ gpio_direction_output(NSA325_GPIO_POWER_OFF, 0))
+ pr_err("nsa325: failed to configure power-off GPIO\n");
+ else
+ pm_power_off = nsa325_power_off;
+}
+
+static int __init nsa325_pci_init(void)
+{
+ if (machine_is_nsa325())
+ kirkwood_pcie_init(KW_PCIE0);
+
+ return 0;
+}
+subsys_initcall(nsa325_pci_init);
+
+MACHINE_START(NSA325, "ZyXEL NSA325 2-Bay Power Media Server")
+ /* Maintainer: Jason Plum <max@warheads.net> */
+ .atag_offset = 0x100,
+ .init_machine = nsa325_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
--- a/arch/arm/mach-kirkwood/openrd-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/openrd-setup.c 2018-10-27 18:30:56.018359231 -0600
@@ -0,0 +1,255 @@
+/*
+ * arch/arm/mach-kirkwood/openrd-setup.c
+ *
+ * Marvell OpenRD (Base|Client|Ultimate) Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data openrd_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data openrd_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(24),
+};
+
+static struct mv_sata_platform_data openrd_sata_data = {
+ .n_ports = 2,
+};
+
+static struct mvsdio_platform_data openrd_mvsdio_data = {
+ .gpio_card_detect = 29, /* MPP29 used as SD card detect */
+ .gpio_write_protect = -1,
+};
+
+static unsigned int openrd_mpp_config[] __initdata = {
+ MPP12_SD_CLK,
+ MPP13_SD_CMD,
+ MPP14_SD_D0,
+ MPP15_SD_D1,
+ MPP16_SD_D2,
+ MPP17_SD_D3,
+ MPP28_GPIO,
+ MPP29_GPIO,
+ MPP34_GPIO,
+ 0
+};
+
+/* Configure MPP for UART1 */
+static unsigned int openrd_uart1_mpp_config[] __initdata = {
+ MPP13_UART1_TXD,
+ MPP14_UART1_RXD,
+ 0
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("cs42l51", 0x4a),
+ },
+};
+
+static struct platform_device openrd_client_audio_device = {
+ .name = "openrd-client-audio",
+ .id = -1,
+};
+
+static int __initdata uart1;
+
+static int __init sd_uart_selection(char *str)
+{
+ uart1 = -EINVAL;
+
+ /* Default is SD. Change if required, for UART */
+ if (!str)
+ return 0;
+
+ if (!strncmp(str, "232", 3)) {
+ uart1 = 232;
+ } else if (!strncmp(str, "485", 3)) {
+ /* OpenRD-Base doesn't have RS485. Treat is as an
+ * unknown argument & just have default setting -
+ * which is SD */
+ if (machine_is_openrd_base()) {
+ uart1 = -ENODEV;
+ return 1;
+ }
+
+ uart1 = 485;
+ }
+ return 1;
+}
+/* Parse boot_command_line string kw_openrd_init_uart1=232/485 */
+__setup("kw_openrd_init_uart1=", sd_uart_selection);
+
+static int __init uart1_mpp_config(void)
+{
+ kirkwood_mpp_conf(openrd_uart1_mpp_config);
+
+ if (gpio_request(34, "SD_UART1_SEL")) {
+ pr_err("GPIO request 34 failed for SD/UART1 selection\n");
+ return -EIO;
+ }
+
+ if (gpio_request(28, "RS232_RS485_SEL")) {
+ pr_err("GPIO request 28 failed for RS232/RS485 selection\n");
+ gpio_free(34);
+ return -EIO;
+ }
+
+ /* Select UART1
+ * Pin # 34: 0 => UART1, 1 => SD */
+ gpio_direction_output(34, 0);
+
+ /* Select RS232 OR RS485
+ * Pin # 28: 0 => RS232, 1 => RS485 */
+ if (uart1 == 232)
+ gpio_direction_output(28, 0);
+ else
+ gpio_direction_output(28, 1);
+
+ gpio_free(34);
+ gpio_free(28);
+
+ return 0;
+}
+
+static void __init openrd_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(openrd_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_nand_init(openrd_nand_parts, ARRAY_SIZE(openrd_nand_parts),
+ 25);
+
+ kirkwood_ehci_init();
+
+ if (machine_is_openrd_ultimate()) {
+ openrd_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+ openrd_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
+ }
+
+ kirkwood_ge00_init(&openrd_ge00_data);
+ if (!machine_is_openrd_base())
+ kirkwood_ge01_init(&openrd_ge01_data);
+
+ kirkwood_sata_init(&openrd_sata_data);
+
+ kirkwood_i2c_init();
+
+ if (machine_is_openrd_client() || machine_is_openrd_ultimate()) {
+ platform_device_register(&openrd_client_audio_device);
+ i2c_register_board_info(0, i2c_board_info,
+ ARRAY_SIZE(i2c_board_info));
+ kirkwood_audio_init();
+ }
+
+ if (uart1 <= 0) {
+ if (uart1 < 0)
+ pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n",
+ uart1);
+
+ /* Select SD
+ * Pin # 34: 0 => UART1, 1 => SD */
+ if (gpio_request(34, "SD_UART1_SEL")) {
+ pr_err("GPIO request 34 failed for SD/UART1 selection\n");
+ } else {
+
+ gpio_direction_output(34, 1);
+ gpio_free(34);
+ kirkwood_sdio_init(&openrd_mvsdio_data);
+ }
+ } else {
+ if (!uart1_mpp_config())
+ kirkwood_uart1_init();
+ }
+}
+
+static int __init openrd_pci_init(void)
+{
+ if (machine_is_openrd_base() ||
+ machine_is_openrd_client() ||
+ machine_is_openrd_ultimate())
+ kirkwood_pcie_init(KW_PCIE0);
+
+ return 0;
+}
+subsys_initcall(openrd_pci_init);
+
+#ifdef CONFIG_MACH_OPENRD_BASE
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+ /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+ .atag_offset = 0x100,
+ .init_machine = openrd_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_OPENRD_CLIENT
+MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
+ /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+ .atag_offset = 0x100,
+ .init_machine = openrd_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_OPENRD_ULTIMATE
+MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
+ /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+ .atag_offset = 0x100,
+ .init_machine = openrd_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
+#endif
diff -ruN a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
--- a/arch/arm/mach-kirkwood/pcie.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/pcie.c 2018-10-27 18:30:56.018359231 -0600
@@ -0,0 +1,296 @@
+/*
+ * arch/arm/mach-kirkwood/pcie.c
+ *
+ * PCIe functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/mbus.h>
+#include <video/vga.h>
+#include <asm/irq.h>
+#include <asm/mach/pci.h>
+#include <plat/pcie.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
+#define KIRKWOOD_MBUS_PCIE0_MEM_TARGET 0x4
+#define KIRKWOOD_MBUS_PCIE0_MEM_ATTR 0xe8
+#define KIRKWOOD_MBUS_PCIE0_IO_TARGET 0x4
+#define KIRKWOOD_MBUS_PCIE0_IO_ATTR 0xe0
+#define KIRKWOOD_MBUS_PCIE1_MEM_TARGET 0x4
+#define KIRKWOOD_MBUS_PCIE1_MEM_ATTR 0xd8
+#define KIRKWOOD_MBUS_PCIE1_IO_TARGET 0x4
+#define KIRKWOOD_MBUS_PCIE1_IO_ATTR 0xd0
+
+static void kirkwood_enable_pcie_clk(const char *port)
+{
+ struct clk *clk;
+
+ clk = clk_get_sys("pcie", port);
+ if (IS_ERR(clk)) {
+ pr_err("PCIE clock %s missing\n", port);
+ return;
+ }
+ clk_prepare_enable(clk);
+ clk_put(clk);
+}
+
+/* This function is called very early in the boot when probing the
+ hardware to determine what we actually are, and what rate tclk is
+ ticking at. Hence calling kirkwood_enable_pcie_clk() is not
+ possible since the clk tree has not been created yet. */
+void kirkwood_enable_pcie(void)
+{
+ u32 curr = readl(CLOCK_GATING_CTRL);
+ if (!(curr & CGC_PEX0))
+ writel(curr | CGC_PEX0, CLOCK_GATING_CTRL);
+}
+
+void kirkwood_pcie_id(u32 *dev, u32 *rev)
+{
+ kirkwood_enable_pcie();
+ *dev = orion_pcie_dev_id(PCIE_VIRT_BASE);
+ *rev = orion_pcie_rev(PCIE_VIRT_BASE);
+}
+
+struct pcie_port {
+ u8 root_bus_nr;
+ void __iomem *base;
+ spinlock_t conf_lock;
+ int irq;
+ struct resource res;
+};
+
+static int pcie_port_map[2];
+static int num_pcie_ports;
+
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
+{
+ /*
+ * Don't go out when trying to access --
+ * 1. nonexisting device on local bus
+ * 2. where there's no device connected (no link)
+ */
+ if (bus == pp->root_bus_nr && dev == 0)
+ return 1;
+
+ if (!orion_pcie_link_up(pp->base))
+ return 0;
+
+ if (bus == pp->root_bus_nr && dev != 1)
+ return 0;
+
+ return 1;
+}
+
+
+/*
+ * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
+ * and then reading the PCIE_CONF_DATA register. Need to make sure these
+ * transactions are atomic.
+ */
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+ int size, u32 *val)
+{
+ struct pci_sys_data *sys = bus->sysdata;
+ struct pcie_port *pp = sys->private_data;
+ unsigned long flags;
+ int ret;
+
+ if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ spin_lock_irqsave(&pp->conf_lock, flags);
+ ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
+ spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+ return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 val)
+{
+ struct pci_sys_data *sys = bus->sysdata;
+ struct pcie_port *pp = sys->private_data;
+ unsigned long flags;
+ int ret;
+
+ if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ spin_lock_irqsave(&pp->conf_lock, flags);
+ ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
+ spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+ return ret;
+}
+
+static struct pci_ops pcie_ops = {
+ .read = pcie_rd_conf,
+ .write = pcie_wr_conf,
+};
+
+static void __init pcie0_ioresources_init(struct pcie_port *pp)
+{
+ pp->base = PCIE_VIRT_BASE;
+ pp->irq = IRQ_KIRKWOOD_PCIE;
+
+ /*
+ * IORESOURCE_MEM
+ */
+ pp->res.name = "PCIe 0 MEM";
+ pp->res.start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+ pp->res.end = pp->res.start + KIRKWOOD_PCIE_MEM_SIZE - 1;
+ pp->res.flags = IORESOURCE_MEM;
+}
+
+static void __init pcie1_ioresources_init(struct pcie_port *pp)
+{
+ pp->base = PCIE1_VIRT_BASE;
+ pp->irq = IRQ_KIRKWOOD_PCIE1;
+
+ /*
+ * IORESOURCE_MEM
+ */
+ pp->res.name = "PCIe 1 MEM";
+ pp->res.start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
+ pp->res.end = pp->res.start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
+ pp->res.flags = IORESOURCE_MEM;
+}
+
+static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+ struct pcie_port *pp;
+ int index;
+
+ if (nr >= num_pcie_ports)
+ return 0;
+
+ index = pcie_port_map[nr];
+ pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
+
+ pp = kzalloc(sizeof(*pp), GFP_KERNEL);
+ if (!pp)
+ panic("PCIe: failed to allocate pcie_port data");
+ sys->private_data = pp;
+ pp->root_bus_nr = sys->busnr;
+ spin_lock_init(&pp->conf_lock);
+
+ switch (index) {
+ case 0:
+ kirkwood_enable_pcie_clk("0");
+ pcie0_ioresources_init(pp);
+ pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE_IO_PHYS_BASE);
+ break;
+ case 1:
+ kirkwood_enable_pcie_clk("1");
+ pcie1_ioresources_init(pp);
+ pci_ioremap_io(SZ_64K * sys->busnr,
+ KIRKWOOD_PCIE1_IO_PHYS_BASE);
+ break;
+ default:
+ panic("PCIe setup: invalid controller %d", index);
+ }
+
+ if (request_resource(&iomem_resource, &pp->res))
+ panic("Request PCIe%d Memory resource failed\n", index);
+
+ pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
+
+ /*
+ * Generic PCIe unit setup.
+ */
+ orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+
+ orion_pcie_setup(pp->base);
+
+ return 1;
+}
+
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
+static void rc_pci_fixup(struct pci_dev *dev)
+{
+ if (dev->bus->parent == NULL && dev->devfn == 0) {
+ int i;
+
+ dev->class &= 0xff;
+ dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ dev->resource[i].start = 0;
+ dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
+{
+ struct pci_sys_data *sys = dev->sysdata;
+ struct pcie_port *pp = sys->private_data;
+
+ return pp->irq;
+}
+
+static struct hw_pci kirkwood_pci __initdata = {
+ .setup = kirkwood_pcie_setup,
+ .map_irq = kirkwood_pcie_map_irq,
+ .ops = &pcie_ops,
+};
+
+static void __init add_pcie_port(int index, void __iomem *base)
+{
+ pcie_port_map[num_pcie_ports++] = index;
+ pr_info("Kirkwood PCIe port %d: link %s\n", index,
+ orion_pcie_link_up(base) ? "up" : "down");
+}
+
+void __init kirkwood_pcie_init(unsigned int portmask)
+{
+ mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE0_IO_TARGET,
+ KIRKWOOD_MBUS_PCIE0_IO_ATTR,
+ KIRKWOOD_PCIE_IO_PHYS_BASE,
+ KIRKWOOD_PCIE_IO_SIZE,
+ KIRKWOOD_PCIE_IO_BUS_BASE);
+ mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE0_MEM_TARGET,
+ KIRKWOOD_MBUS_PCIE0_MEM_ATTR,
+ KIRKWOOD_PCIE_MEM_PHYS_BASE,
+ KIRKWOOD_PCIE_MEM_SIZE);
+ mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE1_IO_TARGET,
+ KIRKWOOD_MBUS_PCIE1_IO_ATTR,
+ KIRKWOOD_PCIE1_IO_PHYS_BASE,
+ KIRKWOOD_PCIE1_IO_SIZE,
+ KIRKWOOD_PCIE1_IO_BUS_BASE);
+ mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE1_MEM_TARGET,
+ KIRKWOOD_MBUS_PCIE1_MEM_ATTR,
+ KIRKWOOD_PCIE1_MEM_PHYS_BASE,
+ KIRKWOOD_PCIE1_MEM_SIZE);
+
+ vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+
+ if (portmask & KW_PCIE0)
+ add_pcie_port(0, PCIE_VIRT_BASE);
+
+ if (portmask & KW_PCIE1)
+ add_pcie_port(1, PCIE1_VIRT_BASE);
+
+ kirkwood_pci.nr_controllers = num_pcie_ports;
+ pci_common_init(&kirkwood_pci);
+}
diff -ruN a/arch/arm/mach-kirkwood/pm.c b/arch/arm/mach-kirkwood/pm.c
--- a/arch/arm/mach-kirkwood/pm.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/pm.c 2018-10-27 18:30:56.018359231 -0600
@@ -0,0 +1,76 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+static void __iomem *ddr_operation_base;
+static void __iomem *memory_pm_ctrl;
+
+static void kirkwood_low_power(void)
+{
+ u32 mem_pm_ctrl;
+
+ mem_pm_ctrl = readl(memory_pm_ctrl);
+
+ /* Set peripherals to low-power mode */
+ writel_relaxed(~0, memory_pm_ctrl);
+
+ /* Set DDR in self-refresh */
+ writel_relaxed(0x7, ddr_operation_base);
+
+ /*
+ * Set CPU in wait-for-interrupt state.
+ * This disables the CPU core clocks,
+ * the array clocks, and also the L2 controller.
+ */
+ cpu_do_idle();
+
+ writel_relaxed(mem_pm_ctrl, memory_pm_ctrl);
+}
+
+static int kirkwood_suspend_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ kirkwood_low_power();
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int kirkwood_pm_valid_standby(suspend_state_t state)
+{
+ return state == PM_SUSPEND_STANDBY;
+}
+
+static const struct platform_suspend_ops kirkwood_suspend_ops = {
+ .enter = kirkwood_suspend_enter,
+ .valid = kirkwood_pm_valid_standby,
+};
+
+void __init kirkwood_pm_init(void)
+{
+ ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
+ memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4);
+
+ suspend_set_ops(&kirkwood_suspend_ops);
+}
diff -ruN a/arch/arm/mach-kirkwood/pm.h b/arch/arm/mach-kirkwood/pm.h
--- a/arch/arm/mach-kirkwood/pm.h 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/pm.h 2018-10-27 18:30:56.018359231 -0600
@@ -0,0 +1,26 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_KIRKWOOD_PM_H
+#define __ARCH_KIRKWOOD_PM_H
+
+#ifdef CONFIG_PM
+void kirkwood_pm_init(void);
+#else
+static inline void kirkwood_pm_init(void) {};
+#endif
+
+#endif
diff -ruN a/arch/arm/mach-kirkwood/pogo_e02-setup.c b/arch/arm/mach-kirkwood/pogo_e02-setup.c
--- a/arch/arm/mach-kirkwood/pogo_e02-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/pogo_e02-setup.c 2018-10-27 18:30:56.018359231 -0600
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-kirkwood/pogo_e02-setup.c
+ *
+ * CloudEngines Pogoplug E02 support
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition pogo_e02_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "pogoplug",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_32M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data pogo_e02_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct gpio_led pogo_e02_led_pins[] = {
+ {
+ .name = "status:green:health",
+ .default_trigger = "default-on",
+ .gpio = 48,
+ .active_low = 1,
+ },
+ {
+ .name = "status:orange:fault",
+ .default_trigger = "none",
+ .gpio = 49,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led_platform_data pogo_e02_led_data = {
+ .leds = pogo_e02_led_pins,
+ .num_leds = ARRAY_SIZE(pogo_e02_led_pins),
+};
+
+static struct platform_device pogo_e02_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &pogo_e02_led_data,
+ }
+};
+
+static unsigned int pogo_e02_mpp_config[] __initdata = {
+ MPP29_GPIO, /* USB Power Enable */
+ MPP48_GPIO, /* LED Green */
+ MPP49_GPIO, /* LED Orange */
+ 0
+};
+
+static void __init pogo_e02_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ /* setup gpio pin select */
+ kirkwood_mpp_conf(pogo_e02_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(pogo_e02_nand_parts), 25);
+
+ if (gpio_request(29, "USB Power Enable") != 0 ||
+ gpio_direction_output(29, 1) != 0)
+ printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&pogo_e02_ge00_data);
+
+ platform_device_register(&pogo_e02_leds);
+}
+
+MACHINE_START(POGO_E02, "Pogoplug E02")
+ .atag_offset = 0x100,
+ .init_machine = pogo_e02_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/pogoplugv4-setup.c b/arch/arm/mach-kirkwood/pogoplugv4-setup.c
--- a/arch/arm/mach-kirkwood/pogoplugv4-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/pogoplugv4-setup.c 2018-10-27 18:30:56.018359231 -0600
@@ -0,0 +1,195 @@
+/*
+ * arch/arm/mach-kirkwood/pogoplugv4-setup.c
+ *
+ * Pogoplug Series 4 Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include <plat/orion-gpio.h>
+#include "common.h"
+#include "mpp.h"
+
+#define POGOPLUGV4_GPIO_USB_VBUS 10
+
+static struct mtd_partition ppv4_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 2 * SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 3 * SZ_1M
+ }, {
+ .name = "uImage2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 3 * SZ_1M
+ }, {
+ .name = "failsafe",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_8M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data pogoplugv4_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data pogoplugv4_sata_data = {
+ .n_ports = 1,
+};
+
+static struct gpio_keys_button pogoplugv4_button_pins[] = {
+ {
+ .code = KEY_EJECTCD,
+ .gpio = 29,
+ .desc = "Eject Button",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data pogoplugv4_button_data = {
+ .buttons = pogoplugv4_button_pins,
+ .nbuttons = ARRAY_SIZE(pogoplugv4_button_pins),
+};
+
+static struct platform_device pogoplugv4_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &pogoplugv4_button_data,
+ },
+};
+
+static struct gpio_led pogoplugv4_led_pins[] = {
+ {
+ .name = "status:green:health",
+ .default_trigger = "default-on",
+ .gpio = 22,
+ .active_low = 1,
+ },
+ {
+ .name = "status:red:fault",
+ .default_trigger = "none",
+ .gpio = 24,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data pogoplugv4_led_data = {
+ .leds = pogoplugv4_led_pins,
+ .num_leds = ARRAY_SIZE(pogoplugv4_led_pins),
+};
+
+static struct platform_device pogoplugv4_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &pogoplugv4_led_data,
+ }
+};
+
+static struct mvsdio_platform_data ppv4_mvsdio_data = {
+ .gpio_card_detect = 27,
+};
+
+static unsigned int ppv4_mpp_config[] __initdata = {
+ MPP27_GPIO, /* SD card detect */
+ MPP29_GPIO, /* Eject button */
+ MPP22_GPIO, /* Green LED */
+ MPP24_GPIO, /* Red LED */
+ MPP12_SD_CLK,
+ MPP13_SD_CMD,
+ MPP14_SD_D0,
+ MPP15_SD_D1,
+ MPP16_SD_D2,
+ MPP17_SD_D3,
+ 0
+};
+
+static const struct flash_platform_data pogoplugv4_spi_slave_data = {
+ .type = "m25p05-nonjedec",
+};
+
+static struct spi_board_info __initdata pogoplugv4_spi_slave_info[] = {
+ {
+ .modalias = "m25p05-nonjedec",
+ .platform_data = &pogoplugv4_spi_slave_data,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static void __init pogoplugv4_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(ppv4_mpp_config);
+
+ orion_gpio_set_valid(POGOPLUGV4_GPIO_USB_VBUS, 1);
+ if (gpio_request(POGOPLUGV4_GPIO_USB_VBUS, "USB VBUS") != 0 ||
+ gpio_direction_output(POGOPLUGV4_GPIO_USB_VBUS, 1) != 0)
+ pr_err("POGOPLUGV4: failed to setup USB VBUS GPIO\n");
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&pogoplugv4_ge00_data);
+ kirkwood_sata_init(&pogoplugv4_sata_data);
+ spi_register_board_info(pogoplugv4_spi_slave_info,
+ ARRAY_SIZE(pogoplugv4_spi_slave_info));
+ kirkwood_spi_init();
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(ppv4_nand_parts), 25);
+ kirkwood_sdio_init(&ppv4_mvsdio_data);
+ platform_device_register(&pogoplugv4_leds);
+ platform_device_register(&pogoplugv4_buttons);
+}
+
+static int __init pogoplugv4_pci_init(void)
+{
+ if (machine_is_pogoplugv4())
+ kirkwood_pcie_init(KW_PCIE0);
+
+ return 0;
+}
+subsys_initcall(pogoplugv4_pci_init);
+
+MACHINE_START(POGOPLUGV4, "Pogoplug V4")
+ /* Maintainer: Kevin Mihelich <kevin@archlinuxarm.org> */
+ .atag_offset = 0x100,
+ .init_machine = pogoplugv4_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c 2018-10-27 18:30:56.018359231 -0600
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+ *
+ * Marvell RD-88F6192-NAS Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/orion-gpio.h>
+#include "common.h"
+
+#define RD88F6192_GPIO_USB_VBUS 10
+
+static struct mv643xx_eth_platform_data rd88f6192_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data rd88f6192_sata_data = {
+ .n_ports = 2,
+};
+
+static const struct flash_platform_data rd88F6192_spi_slave_data = {
+ .type = "m25p128",
+};
+
+static struct spi_board_info __initdata rd88F6192_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &rd88F6192_spi_slave_data,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static void __init rd88f6192_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
+ if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
+ gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
+ pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&rd88f6192_ge00_data);
+ kirkwood_sata_init(&rd88f6192_sata_data);
+ spi_register_board_info(rd88F6192_spi_slave_info,
+ ARRAY_SIZE(rd88F6192_spi_slave_info));
+ kirkwood_spi_init();
+ kirkwood_uart0_init();
+}
+
+static int __init rd88f6192_pci_init(void)
+{
+ if (machine_is_rd88f6192_nas())
+ kirkwood_pcie_init(KW_PCIE0);
+
+ return 0;
+}
+subsys_initcall(rd88f6192_pci_init);
+
+MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
+ /* Maintainer: Saeed Bishara <saeed@marvell.com> */
+ .atag_offset = 0x100,
+ .init_machine = rd88f6192_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c 2018-10-27 18:30:56.018359231 -0600
@@ -0,0 +1,128 @@
+/*
+ * arch/arm/mach-kirkwood/rd88f6281-setup.c
+ *
+ * Marvell RD-88F6281 Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <net/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition rd88f6281_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_2M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_NONE,
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+};
+
+static struct dsa_chip_data rd88f6281_switch_chip_data = {
+ .port_names[0] = "lan1",
+ .port_names[1] = "lan2",
+ .port_names[2] = "lan3",
+ .port_names[3] = "lan4",
+ .port_names[5] = "cpu",
+};
+
+static struct dsa_platform_data rd88f6281_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &rd88f6281_switch_chip_data,
+};
+
+static struct mv643xx_eth_platform_data rd88f6281_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(11),
+};
+
+static struct mv_sata_platform_data rd88f6281_sata_data = {
+ .n_ports = 2,
+};
+
+static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
+ .gpio_card_detect = 28,
+ .gpio_write_protect = -1,
+};
+
+static unsigned int rd88f6281_mpp_config[] __initdata = {
+ MPP28_GPIO,
+ 0
+};
+
+static void __init rd88f6281_init(void)
+{
+ u32 dev, rev;
+
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(rd88f6281_mpp_config);
+
+ kirkwood_nand_init(rd88f6281_nand_parts,
+ ARRAY_SIZE(rd88f6281_nand_parts),
+ 25);
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&rd88f6281_ge00_data);
+ kirkwood_pcie_id(&dev, &rev);
+ if (rev == MV88F6281_REV_A0) {
+ rd88f6281_switch_chip_data.sw_addr = 10;
+ kirkwood_ge01_init(&rd88f6281_ge01_data);
+ } else {
+ rd88f6281_switch_chip_data.port_names[4] = "wan";
+ }
+ kirkwood_ge00_switch_init(&rd88f6281_switch_plat_data, NO_IRQ);
+
+ kirkwood_sata_init(&rd88f6281_sata_data);
+ kirkwood_sdio_init(&rd88f6281_mvsdio_data);
+ kirkwood_uart0_init();
+}
+
+static int __init rd88f6281_pci_init(void)
+{
+ if (machine_is_rd88f6281())
+ kirkwood_pcie_init(KW_PCIE0);
+
+ return 0;
+}
+subsys_initcall(rd88f6281_pci_init);
+
+MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
+ /* Maintainer: Saeed Bishara <saeed@marvell.com> */
+ .atag_offset = 0x100,
+ .init_machine = rd88f6281_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c 2018-10-27 18:30:56.022359211 -0600
@@ -0,0 +1,170 @@
+/*
+ * arch/arm/mach-kirkwood/sheevaplug-setup.c
+ *
+ * Marvell SheevaPlug Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition sheevaplug_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data esata_sheevaplug_sata_data = {
+ .n_ports = 2,
+};
+
+static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
+ /* unfortunately the CD signal has not been connected */
+};
+
+static struct mvsdio_platform_data esata_sheevaplug_mvsdio_data = {
+ .gpio_write_protect = -1, /* (disable - does not work on 3.9+) MPP44 used as SD write protect */
+ .gpio_card_detect = 47, /* MPP47 used as SD card detect */
+};
+
+static struct gpio_led sheevaplug_led_pins[] = {
+ {
+ .name = "plug:red:misc",
+ .default_trigger = "none",
+ .gpio = 46,
+ .active_low = 1,
+ },
+ {
+ .name = "status:green:health",
+ .default_trigger = "none",
+ .gpio = 48,
+ .active_low = 1,
+ },
+ {
+ .name = "status:blue:health",
+ .default_trigger = "default-on",
+ .gpio = 49,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data sheevaplug_led_data = {
+ .leds = sheevaplug_led_pins,
+ .num_leds = ARRAY_SIZE(sheevaplug_led_pins),
+};
+
+static struct platform_device sheevaplug_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &sheevaplug_led_data,
+ }
+};
+
+static unsigned int sheevaplug_mpp_config[] __initdata = {
+ MPP29_GPIO, /* USB Power Enable */
+ MPP46_GPIO, /* LED Red */
+ MPP48_GPIO, /* LED Green */
+ MPP49_GPIO, /* LED Blue */
+ 0
+};
+
+static unsigned int esata_sheevaplug_mpp_config[] __initdata = {
+ MPP29_GPIO, /* USB Power Enable */
+ //MPP44_GPIO, /* SD Write Protect */
+ MPP47_GPIO, /* SD Card Detect */
+ MPP46_GPIO, /* LED Red */
+ MPP48_GPIO, /* LED Green */
+ MPP49_GPIO, /* LED Blue */
+ 0
+};
+
+static void __init sheevaplug_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ /* setup gpio pin select */
+ if (machine_is_esata_sheevaplug())
+ kirkwood_mpp_conf(esata_sheevaplug_mpp_config);
+ else
+ kirkwood_mpp_conf(sheevaplug_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
+
+ if (gpio_request(29, "USB Power Enable") != 0 ||
+ gpio_direction_output(29, 1) != 0)
+ pr_err("can't set up GPIO 29 (USB Power Enable)\n");
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&sheevaplug_ge00_data);
+
+ /* honor lower power consumption for plugs with out eSATA */
+ if (machine_is_esata_sheevaplug())
+ kirkwood_sata_init(&esata_sheevaplug_sata_data);
+
+ /* enable sd wp and sd cd on plugs with esata */
+ if (machine_is_esata_sheevaplug())
+ kirkwood_sdio_init(&esata_sheevaplug_mvsdio_data);
+ else
+ kirkwood_sdio_init(&sheevaplug_mvsdio_data);
+
+ platform_device_register(&sheevaplug_leds);
+}
+
+#ifdef CONFIG_MACH_SHEEVAPLUG
+MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
+ /* Maintainer: shadi Ammouri <shadi@marvell.com> */
+ .atag_offset = 0x100,
+ .init_machine = sheevaplug_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
+MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
+ .atag_offset = 0x100,
+ .init_machine = sheevaplug_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
+#endif
diff -ruN a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
--- a/arch/arm/mach-kirkwood/t5325-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/t5325-setup.c 2018-10-27 18:30:56.022359211 -0600
@@ -0,0 +1,216 @@
+/*
+ *
+ * HP t5325 Thin Client setup
+ *
+ * Copyright (C) 2010 Martin Michlmayr <tbm@cyrius.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <sound/alc5623.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition hp_t5325_partitions[] = {
+ {
+ .name = "u-boot env",
+ .size = SZ_64K,
+ .offset = SZ_512K + SZ_256K,
+ },
+ {
+ .name = "permanent u-boot env",
+ .size = SZ_64K,
+ .offset = MTDPART_OFS_APPEND,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "HP env",
+ .size = SZ_64K,
+ .offset = MTDPART_OFS_APPEND,
+ },
+ {
+ .name = "u-boot",
+ .size = SZ_512K,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "SSD firmware",
+ .size = SZ_256K,
+ .offset = SZ_512K,
+ },
+};
+
+static const struct flash_platform_data hp_t5325_flash = {
+ .type = "mx25l8005",
+ .name = "spi_flash",
+ .parts = hp_t5325_partitions,
+ .nr_parts = ARRAY_SIZE(hp_t5325_partitions),
+};
+
+static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &hp_t5325_flash,
+ .irq = -1,
+ },
+};
+
+static struct mv643xx_eth_platform_data hp_t5325_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data hp_t5325_sata_data = {
+ .n_ports = 2,
+};
+
+static struct gpio_keys_button hp_t5325_buttons[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = 45,
+ .desc = "Power",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data hp_t5325_button_data = {
+ .buttons = hp_t5325_buttons,
+ .nbuttons = ARRAY_SIZE(hp_t5325_buttons),
+};
+
+static struct platform_device hp_t5325_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &hp_t5325_button_data,
+ }
+};
+
+static struct platform_device hp_t5325_audio_device = {
+ .name = "t5325-audio",
+ .id = -1,
+};
+
+static unsigned int hp_t5325_mpp_config[] __initdata = {
+ MPP0_NF_IO2,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP7_SPI_SCn,
+ MPP8_TW0_SDA,
+ MPP9_TW0_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_SD_CLK,
+ MPP13_GPIO,
+ MPP14_GPIO,
+ MPP15_GPIO,
+ MPP16_GPIO,
+ MPP17_GPIO,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_GPIO,
+ MPP21_GPIO,
+ MPP22_GPIO,
+ MPP23_GPIO,
+ MPP32_GPIO,
+ MPP33_GE1_TXCTL,
+ MPP39_AU_I2SBCLK,
+ MPP40_AU_I2SDO,
+ MPP43_AU_I2SDI,
+ MPP41_AU_I2SLRCLK,
+ MPP42_AU_I2SMCLK,
+ MPP45_GPIO, /* Power button */
+ MPP48_GPIO, /* Board power off */
+ 0
+};
+
+static struct alc5623_platform_data alc5621_data = {
+ .add_ctrl = 0x3700,
+ .jack_det_ctrl = 0x4810,
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("alc5621", 0x1a),
+ .platform_data = &alc5621_data,
+ },
+};
+
+#define HP_T5325_GPIO_POWER_OFF 48
+
+static void hp_t5325_power_off(void)
+{
+ gpio_set_value(HP_T5325_GPIO_POWER_OFF, 1);
+}
+
+static void __init hp_t5325_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(hp_t5325_mpp_config);
+
+ kirkwood_uart0_init();
+ spi_register_board_info(hp_t5325_spi_slave_info,
+ ARRAY_SIZE(hp_t5325_spi_slave_info));
+ kirkwood_spi_init();
+ kirkwood_i2c_init();
+ kirkwood_ge00_init(&hp_t5325_ge00_data);
+ kirkwood_sata_init(&hp_t5325_sata_data);
+ kirkwood_ehci_init();
+ platform_device_register(&hp_t5325_button_device);
+ platform_device_register(&hp_t5325_audio_device);
+
+ i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info));
+ kirkwood_audio_init();
+
+ if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 &&
+ gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0)
+ pm_power_off = hp_t5325_power_off;
+ else
+ pr_err("t5325: failed to configure power-off GPIO\n");
+}
+
+static int __init hp_t5325_pci_init(void)
+{
+ if (machine_is_t5325())
+ kirkwood_pcie_init(KW_PCIE0);
+
+ return 0;
+}
+subsys_initcall(hp_t5325_pci_init);
+
+MACHINE_START(T5325, "HP t5325 Thin Client")
+ /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+ .atag_offset = 0x100,
+ .init_machine = hp_t5325_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/topkick-setup.c b/arch/arm/mach-kirkwood/topkick-setup.c
--- a/arch/arm/mach-kirkwood/topkick-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/topkick-setup.c 2018-10-27 18:30:56.022359211 -0600
@@ -0,0 +1,165 @@
+/*
+ * arch/arm/mach-kirkwood/topkick-setup.c
+ *
+ * USI Topkick Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition topkick_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x180000
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x180000,
+ .size = 128 * 1024
+ }, {
+ .name = "uImage",
+ .offset = 2 * 1024 * 1024,
+ .size = 6 * 1024 * 1024
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data topkick_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data topkick_sata_data = {
+ .n_ports = 1,
+};
+
+static struct mvsdio_platform_data topkick_mvsdio_data = {
+ .gpio_card_detect = 47, /* MPP47 used as SD card detect */
+};
+
+
+static struct gpio_led topkick_led_pins[] = {
+ {
+ .name = "status:blue:disk",
+ .default_trigger = "none",
+ .gpio = 21,
+ .active_low = 1,
+ },
+ {
+ .name = "status:red:fault",
+ .default_trigger = "none",
+ .gpio = 37,
+ .active_low = 1,
+ },
+ {
+ .name = "status:blue:health",
+ .default_trigger = "default-on",
+ .gpio = 38,
+ .active_low = 1,
+ },
+ {
+ .name = "status:green:misc",
+ .default_trigger = "none",
+ .gpio = 39,
+ .active_low = 1,
+ },
+ {
+ .name = "status:orange:misc",
+ .default_trigger = "none",
+ .gpio = 48,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data topkick_led_data = {
+ .leds = topkick_led_pins,
+ .num_leds = ARRAY_SIZE(topkick_led_pins),
+};
+
+static struct platform_device topkick_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &topkick_led_data,
+ }
+};
+
+static unsigned int topkick_mpp_config[] __initdata = {
+ MPP12_SD_CLK, /* SDIO Clock */
+ MPP13_SD_CMD, /* SDIO Cmd */
+ MPP14_SD_D0, /* SDIO Data 0 */
+ MPP15_SD_D1, /* SDIO Data 1 */
+ MPP16_SD_D2, /* SDIO Data 2 */
+ MPP17_SD_D3, /* SDIO Data 3 */
+ MPP21_GPIO, /* LED Blue SATA */
+ MPP35_GPIO, /* USB Power Enable */
+ MPP36_GPIO, /* SATA Power Enable */
+ MPP37_GPIO, /* LED Red System */
+ MPP38_GPIO, /* LED Blue System */
+ MPP39_GPIO, /* LED Green Misc/WiFi */
+ MPP43_GPIO, /* WOL Eth WOL */
+ MPP44_GPIO, /* SW GW Mode */
+ MPP45_GPIO, /* SW AP Mode */
+ MPP46_GPIO, /* SW Power Off */
+ MPP47_GPIO, /* SDIO Detect */
+ MPP48_GPIO, /* LED Orange Misc/WiFi */
+ 0
+};
+
+static void __init topkick_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ /* setup gpio pin select */
+ kirkwood_mpp_conf(topkick_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(topkick_nand_parts), 40);
+
+ if (gpio_request(35, "USB Power Enable") != 0 ||
+ gpio_direction_output(35, 1) != 0)
+ printk(KERN_ERR "can't set up GPIO 35 (USB Power Enable)\n");
+ if (gpio_request(36, "SATA Power Enable") != 0 ||
+ gpio_direction_output(36, 1) != 0)
+ printk(KERN_ERR "can't set up GPIO 36 (SATA Power Enable)\n");
+ kirkwood_ge00_init(&topkick_ge00_data);
+ kirkwood_ehci_init();
+ kirkwood_sata_init(&topkick_sata_data);
+ kirkwood_sdio_init(&topkick_mvsdio_data);
+
+ platform_device_register(&topkick_leds);
+}
+
+MACHINE_START(TOPKICK, "USI Topkick")
+ /* Maintainer: Mike Brown <mbrown@archlinuxarm.org> */
+ .atag_offset = 0x100,
+ .init_machine = topkick_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
--- a/arch/arm/mach-kirkwood/ts219-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/ts219-setup.c 2018-10-27 18:30:56.022359211 -0600
@@ -0,0 +1,142 @@
+/*
+ *
+ * QNAP TS-11x/TS-21x Turbo NAS Board Setup
+ *
+ * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+#include "tsx1x-common.h"
+
+static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
+ I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data qnap_ts219_sata_data = {
+ .n_ports = 2,
+};
+
+static struct gpio_keys_button qnap_ts219_buttons[] = {
+ {
+ .code = KEY_COPY,
+ .gpio = 15,
+ .desc = "USB Copy",
+ .active_low = 1,
+ },
+ {
+ .code = KEY_RESTART,
+ .gpio = 16,
+ .desc = "Reset",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data qnap_ts219_button_data = {
+ .buttons = qnap_ts219_buttons,
+ .nbuttons = ARRAY_SIZE(qnap_ts219_buttons),
+};
+
+static struct platform_device qnap_ts219_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &qnap_ts219_button_data,
+ }
+};
+
+static unsigned int qnap_ts219_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP4_SATA1_ACTn,
+ MPP5_SATA0_ACTn,
+ MPP8_TW0_SDA,
+ MPP9_TW0_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP13_UART1_TXD, /* PIC controller */
+ MPP14_UART1_RXD, /* PIC controller */
+ MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */
+ MPP16_GPIO, /* Reset button (on devices with 88F6281) */
+ MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
+ MPP37_GPIO, /* Reset button (on devices with 88F6282) */
+ MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */
+ MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */
+ 0
+};
+
+static void __init qnap_ts219_init(void)
+{
+ u32 dev, rev;
+
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(qnap_ts219_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_uart1_init(); /* A PIC controller is connected here. */
+ qnap_tsx1x_register_flash();
+ kirkwood_i2c_init();
+ i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
+
+ kirkwood_pcie_id(&dev, &rev);
+ if (dev == MV88F6282_DEV_ID) {
+ qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */
+ qnap_ts219_buttons[1].gpio = 37; /* Reset button */
+ qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+ }
+
+ kirkwood_ge00_init(&qnap_ts219_ge00_data);
+ kirkwood_sata_init(&qnap_ts219_sata_data);
+ kirkwood_ehci_init();
+ platform_device_register(&qnap_ts219_button_device);
+
+ pm_power_off = qnap_tsx1x_power_off;
+
+}
+
+static int __init ts219_pci_init(void)
+{
+ if (machine_is_ts219())
+ kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
+
+ return 0;
+}
+subsys_initcall(ts219_pci_init);
+
+MACHINE_START(TS219, "QNAP TS-119/TS-219")
+ /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+ .atag_offset = 0x100,
+ .init_machine = qnap_ts219_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
--- a/arch/arm/mach-kirkwood/ts41x-setup.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c 2018-10-27 18:30:56.022359211 -0600
@@ -0,0 +1,186 @@
+/*
+ *
+ * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
+ *
+ * Copyright (C) 2009-2010 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+#include "tsx1x-common.h"
+
+/* for the PCIe reset workaround */
+#include <plat/pcie.h>
+
+
+#define QNAP_TS41X_JUMPER_JP1 45
+
+static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
+ I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data qnap_ts41x_sata_data = {
+ .n_ports = 2,
+};
+
+static struct gpio_keys_button qnap_ts41x_buttons[] = {
+ {
+ .code = KEY_COPY,
+ .gpio = 43,
+ .desc = "USB Copy",
+ .active_low = 1,
+ },
+ {
+ .code = KEY_RESTART,
+ .gpio = 37,
+ .desc = "Reset",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data qnap_ts41x_button_data = {
+ .buttons = qnap_ts41x_buttons,
+ .nbuttons = ARRAY_SIZE(qnap_ts41x_buttons),
+};
+
+static struct platform_device qnap_ts41x_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &qnap_ts41x_button_data,
+ }
+};
+
+static unsigned int qnap_ts41x_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP6_SYSRST_OUTn,
+ MPP7_PEX_RST_OUTn,
+ MPP8_TW0_SDA,
+ MPP9_TW0_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP13_UART1_TXD, /* PIC controller */
+ MPP14_UART1_RXD, /* PIC controller */
+ MPP15_SATA0_ACTn,
+ MPP16_SATA1_ACTn,
+ MPP20_GE1_TXD0,
+ MPP21_GE1_TXD1,
+ MPP22_GE1_TXD2,
+ MPP23_GE1_TXD3,
+ MPP24_GE1_RXD0,
+ MPP25_GE1_RXD1,
+ MPP26_GE1_RXD2,
+ MPP27_GE1_RXD3,
+ MPP30_GE1_RXCTL,
+ MPP31_GE1_RXCLK,
+ MPP32_GE1_TCLKOUT,
+ MPP33_GE1_TXCTL,
+ MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
+ MPP37_GPIO, /* Reset button */
+ MPP43_GPIO, /* USB Copy button */
+ MPP44_GPIO, /* Board ID: 0: TS-419U, 1: TS-419 */
+ MPP45_GPIO, /* JP1: 0: LCD, 1: serial console */
+ MPP46_GPIO, /* External SATA HDD1 error indicator */
+ MPP47_GPIO, /* External SATA HDD2 error indicator */
+ MPP48_GPIO, /* External SATA HDD3 error indicator */
+ MPP49_GPIO, /* External SATA HDD4 error indicator */
+ 0
+};
+
+static void __init qnap_ts41x_init(void)
+{
+ u32 dev, rev;
+
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(qnap_ts41x_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_uart1_init(); /* A PIC controller is connected here. */
+ qnap_tsx1x_register_flash();
+ kirkwood_i2c_init();
+ i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
+
+ kirkwood_pcie_id(&dev, &rev);
+ if (dev == MV88F6282_DEV_ID) {
+ qnap_ts41x_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+ qnap_ts41x_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
+ }
+ kirkwood_ge00_init(&qnap_ts41x_ge00_data);
+ kirkwood_ge01_init(&qnap_ts41x_ge01_data);
+
+ kirkwood_sata_init(&qnap_ts41x_sata_data);
+ kirkwood_ehci_init();
+ platform_device_register(&qnap_ts41x_button_device);
+
+ pm_power_off = qnap_tsx1x_power_off;
+
+ if (gpio_request(QNAP_TS41X_JUMPER_JP1, "JP1") == 0)
+ gpio_export(QNAP_TS41X_JUMPER_JP1, 0);
+}
+
+static int __init ts41x_pci_init(void)
+{
+ if (machine_is_ts41x()) {
+ u32 dev, rev;
+
+ /*
+ * Without this explicit reset, the PCIe SATA controller
+ * (Marvell 88sx7042/sata_mv) is known to stop working
+ * after a few minutes.
+ */
+ orion_pcie_reset(PCIE_VIRT_BASE);
+
+ kirkwood_pcie_id(&dev, &rev);
+ if (dev == MV88F6282_DEV_ID)
+ kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
+ else
+ kirkwood_pcie_init(KW_PCIE0);
+ }
+ return 0;
+}
+subsys_initcall(ts41x_pci_init);
+
+MACHINE_START(TS41X, "QNAP TS-41x")
+ /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+ .atag_offset = 0x100,
+ .init_machine = qnap_ts41x_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .init_time = kirkwood_timer_init,
+ .restart = kirkwood_restart,
+MACHINE_END
diff -ruN a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
--- a/arch/arm/mach-kirkwood/tsx1x-common.c 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c 2018-10-27 18:30:56.022359211 -0600
@@ -0,0 +1,113 @@
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/serial_reg.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "tsx1x-common.h"
+
+/*
+ * QNAP TS-x1x Boards flash
+ */
+
+/****************************************************************************
+ * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
+ * partitions on the device because we want to keep compatibility with
+ * the QNAP firmware.
+ * Layout as used by QNAP:
+ * 0x00000000-0x00080000 : "U-Boot"
+ * 0x00200000-0x00400000 : "Kernel"
+ * 0x00400000-0x00d00000 : "RootFS"
+ * 0x00d00000-0x01000000 : "RootFS2"
+ * 0x00080000-0x000c0000 : "U-Boot Config"
+ * 0x000c0000-0x00200000 : "NAS Config"
+ *
+ * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
+ * used by the QNAP TS-109/TS-209.
+ *
+ ***************************************************************************/
+
+static struct mtd_partition qnap_tsx1x_partitions[] = {
+ {
+ .name = "U-Boot",
+ .size = 0x00080000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "Kernel",
+ .size = 0x00200000,
+ .offset = 0x00200000,
+ }, {
+ .name = "RootFS1",
+ .size = 0x00900000,
+ .offset = 0x00400000,
+ }, {
+ .name = "RootFS2",
+ .size = 0x00300000,
+ .offset = 0x00d00000,
+ }, {
+ .name = "U-Boot Config",
+ .size = 0x00040000,
+ .offset = 0x00080000,
+ }, {
+ .name = "NAS Config",
+ .size = 0x00140000,
+ .offset = 0x000c0000,
+ },
+};
+
+static const struct flash_platform_data qnap_tsx1x_flash = {
+ .type = "m25p128",
+ .name = "spi_flash",
+ .parts = qnap_tsx1x_partitions,
+ .nr_parts = ARRAY_SIZE(qnap_tsx1x_partitions),
+};
+
+static struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &qnap_tsx1x_flash,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+void __init qnap_tsx1x_register_flash(void)
+{
+ spi_register_board_info(qnap_tsx1x_spi_slave_info,
+ ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
+ kirkwood_spi_init();
+}
+
+
+/*****************************************************************************
+ * QNAP TS-x1x specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_tsx1x_power_off(void)
+{
+ /* 19200 baud divisor */
+ const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
+
+ pr_info("%s: triggering power-off...\n", __func__);
+
+ /* hijack UART1 and reset into sane state (19200,8n1) */
+ writel(0x83, UART1_REG(LCR));
+ writel(divisor & 0xff, UART1_REG(DLL));
+ writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+ writel(0x03, UART1_REG(LCR));
+ writel(0x00, UART1_REG(IER));
+ writel(0x00, UART1_REG(FCR));
+ writel(0x00, UART1_REG(MCR));
+
+ /* send the power-off command 'A' to PIC */
+ writel('A', UART1_REG(TX));
+}
+
diff -ruN a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h
--- a/arch/arm/mach-kirkwood/tsx1x-common.h 1969-12-31 17:00:00.000000000 -0700
+++ b/arch/arm/mach-kirkwood/tsx1x-common.h 2018-10-27 18:30:56.022359211 -0600
@@ -0,0 +1,7 @@
+#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
+#define __ARCH_KIRKWOOD_TSX1X_COMMON_H
+
+extern void __init qnap_tsx1x_register_flash(void);
+extern void qnap_tsx1x_power_off(void);
+
+#endif
diff -ruN a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
--- a/arch/arm/mm/Kconfig 2018-10-20 01:52:38.000000000 -0600
+++ b/arch/arm/mm/Kconfig 2018-10-27 18:30:56.022359211 -0600
@@ -878,7 +878,7 @@
config CACHE_FEROCEON_L2
bool "Enable the Feroceon L2 cache controller"
- depends on ARCH_MV78XX0 || ARCH_MVEBU
+ depends on ARCH_KIRKWOOD ||ARCH_MV78XX0 || ARCH_MVEBU
default y
select OUTER_CACHE
help
diff -ruN a/drivers/ata/Kconfig b/drivers/ata/Kconfig
--- a/drivers/ata/Kconfig 2018-10-20 01:52:38.000000000 -0600
+++ b/drivers/ata/Kconfig 2018-10-27 18:32:48.425790190 -0600
@@ -330,7 +330,7 @@
config SATA_MV
tristate "Marvell SATA support"
depends on HAS_DMA
- depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
+ depends on PCI || ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
select GENERIC_PHY
help
diff -ruN a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
--- a/drivers/ata/sata_mv.c 2018-10-20 01:52:38.000000000 -0600
+++ b/drivers/ata/sata_mv.c 2018-10-27 18:30:56.030359171 -0600
@@ -72,6 +72,7 @@
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <linux/libata.h>
+#include <linux/leds.h>
#define DRV_NAME "sata_mv"
#define DRV_VERSION "1.28"
@@ -1175,6 +1176,8 @@
{
int want_ncq = (protocol == ATA_PROT_NCQ);
+ ledtrig_ide_activity(ap->port_no);
+
if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0);
if (want_ncq != using_ncq)
diff -ruN a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
--- a/drivers/cpufreq/Kconfig.arm 2018-10-20 01:52:38.000000000 -0600
+++ b/drivers/cpufreq/Kconfig.arm 2018-10-27 18:30:56.030359171 -0600
@@ -76,7 +76,7 @@
If in doubt, say Y.
config ARM_KIRKWOOD_CPUFREQ
- def_bool MACH_KIRKWOOD
+ def_bool ARCH_KIRKWOOD || MACH_KIRKWOOD
help
This adds the CPUFreq driver for Marvell Kirkwood
SoCs.
diff -ruN a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
--- a/drivers/cpuidle/Kconfig.arm 2018-10-20 01:52:38.000000000 -0600
+++ b/drivers/cpuidle/Kconfig.arm 2018-10-27 18:30:56.030359171 -0600
@@ -39,7 +39,7 @@
config ARM_KIRKWOOD_CPUIDLE
bool "CPU Idle Driver for Marvell Kirkwood SoCs"
- depends on MACH_KIRKWOOD && !ARM64
+ depends on (ARCH_KIRKWOOD || MACH_KIRKWOOD) && !ARM64
help
This adds the CPU Idle driver for Marvell Kirkwood SoCs.
diff -ruN a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
--- a/drivers/hwmon/Kconfig 2018-10-20 01:52:38.000000000 -0600
+++ b/drivers/hwmon/Kconfig 2018-10-27 18:30:56.034359150 -0600
@@ -1757,6 +1757,19 @@
This driver provides support for the Ultra45 workstation environmental
sensors.
+config SENSORS_NSA3XX
+ tristate "ZyXEL NSA3xx fan speed and temperature sensors"
+ depends on (MACH_NSA310 || MACH_NSA320) && GENERIC_GPIO
+ help
+ If you say yes here you get support for hardware monitoring
+ for the ZyXEL NSA3XX Media Servers.
+
+ The sensor data is taken from a Holtek HT46R065 microcontroller
+ connected to GPIO lines.
+
+ This driver can also be built as a module. If so, the module
+ will be called nsa3xx-hwmon.
+
if ACPI
comment "ACPI drivers"
diff -ruN a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
--- a/drivers/hwmon/Makefile 2018-10-20 01:52:38.000000000 -0600
+++ b/drivers/hwmon/Makefile 2018-10-27 18:30:56.034359150 -0600
@@ -118,6 +118,7 @@
obj-$(CONFIG_SENSORS_MAX6697) += max6697.o
obj-$(CONFIG_SENSORS_MAX31790) += max31790.o
obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
+obj-$(CONFIG_SENSORS_NSA3XX) += nsa3xx-hwmon.o
obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o
obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o
diff -ruN a/drivers/hwmon/nsa3xx-hwmon.c b/drivers/hwmon/nsa3xx-hwmon.c
--- a/drivers/hwmon/nsa3xx-hwmon.c 1969-12-31 17:00:00.000000000 -0700
+++ b/drivers/hwmon/nsa3xx-hwmon.c 2018-10-27 18:30:56.034359150 -0600
@@ -0,0 +1,251 @@
+/*
+ * drivers/hwmon/nsa3xx-hwmon.c
+ *
+ * ZyXEL NSA3xx Media Servers
+ * hardware monitoring
+ *
+ * Copyright (C) 2012 Peter Schildmann <linux@schildmann.info>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/nsa3xx-hwmon.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <asm/delay.h>
+
+#define MAGIC_NUMBER 0x55
+
+struct nsa3xx_hwmon {
+ struct platform_device *pdev;
+ struct device *classdev;
+ struct mutex update_lock; /* lock GPIO operations */
+ unsigned long last_updated; /* jiffies */
+ unsigned long mcu_data;
+};
+
+enum nsa3xx_inputs {
+ NSA3XX_FAN = 1,
+ NSA3XX_TEMP = 0,
+};
+
+static const char *nsa3xx_input_names[] = {
+ [NSA3XX_FAN] = "Chassis Fan",
+ [NSA3XX_TEMP] = "System Temperature",
+};
+
+static unsigned long nsa3xx_hwmon_update(struct device *dev)
+{
+ int i;
+ unsigned long mcu_data;
+ struct nsa3xx_hwmon *hwmon = dev_get_drvdata(dev);
+ struct nsa3xx_hwmon_platform_data *pdata = hwmon->pdev->dev.platform_data;
+
+ mutex_lock(&hwmon->update_lock);
+
+ mcu_data = hwmon->mcu_data;
+
+ if (time_after(jiffies, hwmon->last_updated + (3 * HZ)) || mcu_data == 0) {
+ dev_dbg(dev, "Reading MCU data\n");
+
+ gpio_set_value(pdata->act_pin, 0);
+ msleep(100);
+
+ for (i = 31; i >= 0; i--) {
+ gpio_set_value(pdata->clk_pin, 0);
+ udelay(100);
+
+ gpio_set_value(pdata->clk_pin, 1);
+ udelay(100);
+
+ mcu_data |= gpio_get_value(pdata->data_pin) ? (1 << i) : 0;
+ }
+
+ gpio_set_value(pdata->act_pin, 1);
+
+ if ((mcu_data & 0xff000000) != (MAGIC_NUMBER << 24)) {
+ dev_err(dev, "Failed to read MCU data\n");
+ mcu_data = 0;
+ }
+
+ hwmon->mcu_data = mcu_data;
+ hwmon->last_updated = jiffies;
+ }
+
+ mutex_unlock(&hwmon->update_lock);
+
+ return mcu_data;
+}
+
+static ssize_t show_name(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "nsa3xx\n");
+}
+
+static ssize_t show_label(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int channel = to_sensor_dev_attr(attr)->index;
+ return sprintf(buf, "%s\n", nsa3xx_input_names[channel]);
+}
+
+static ssize_t show_value(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int channel = to_sensor_dev_attr(attr)->index;
+ unsigned long mcu_data = nsa3xx_hwmon_update(dev);
+ unsigned long value = 0;
+ switch(channel) {
+ case NSA3XX_TEMP:
+ value = (mcu_data & 0xffff) * 100;
+ break;
+ case NSA3XX_FAN:
+ value = ((mcu_data & 0xff0000) >> 16) * 100;
+ break;
+ }
+ return sprintf(buf, "%lu\n", value);
+}
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL, NSA3XX_TEMP);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_value, NULL, NSA3XX_TEMP);
+static SENSOR_DEVICE_ATTR(fan1_label, S_IRUGO, show_label, NULL, NSA3XX_FAN);
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_value, NULL, NSA3XX_FAN);
+
+static struct attribute *nsa3xx_attributes[] = {
+ &dev_attr_name.attr,
+ &sensor_dev_attr_temp1_label.dev_attr.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_label.dev_attr.attr,
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group nsa3xx_attr_group = {
+ .attrs = nsa3xx_attributes,
+};
+
+static int nsa3xx_hwmon_request_gpios(struct nsa3xx_hwmon_platform_data *pdata)
+{
+ int ret;
+
+ if ((ret = gpio_request(pdata->act_pin, "act pin")))
+ return ret;
+
+ if ((ret = gpio_request(pdata->clk_pin, "clk pin")))
+ return ret;
+
+ if ((ret = gpio_request(pdata->data_pin, "data pin")))
+ return ret;
+
+ if ((ret = gpio_direction_output(pdata->act_pin, 1)))
+ return ret;
+
+ if ((ret = gpio_direction_output(pdata->clk_pin, 1)))
+ return ret;
+
+ if ((ret = gpio_direction_input(pdata->data_pin)))
+ return ret;
+
+ return 0;
+}
+
+static void nsa3xx_hwmon_free_gpios(struct nsa3xx_hwmon_platform_data *pdata)
+{
+ gpio_free(pdata->act_pin);
+ gpio_free(pdata->clk_pin);
+ gpio_free(pdata->data_pin);
+}
+
+static int nsa3xx_hwmon_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct nsa3xx_hwmon *hwmon;
+ struct nsa3xx_hwmon_platform_data *pdata = pdev->dev.platform_data;
+
+ hwmon = kzalloc(sizeof(struct nsa3xx_hwmon), GFP_KERNEL);
+ if (!hwmon)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, hwmon);
+ hwmon->pdev = pdev;
+ hwmon->mcu_data = 0;
+ mutex_init(&hwmon->update_lock);
+
+ ret = sysfs_create_group(&pdev->dev.kobj, &nsa3xx_attr_group);
+ if (ret)
+ goto err;
+
+ hwmon->classdev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(hwmon->classdev)) {
+ ret = PTR_ERR(hwmon->classdev);
+ goto err_sysfs;
+ }
+
+ ret = nsa3xx_hwmon_request_gpios(pdata);
+ if (ret)
+ goto err_free_gpio;
+
+ dev_info(&pdev->dev, "initialized\n");
+
+ return 0;
+
+err_free_gpio:
+ nsa3xx_hwmon_free_gpios(pdata);
+ hwmon_device_unregister(hwmon->classdev);
+err_sysfs:
+ sysfs_remove_group(&pdev->dev.kobj, &nsa3xx_attr_group);
+err:
+ platform_set_drvdata(pdev, NULL);
+ kfree(hwmon);
+ return ret;
+}
+
+static int nsa3xx_hwmon_remove(struct platform_device *pdev)
+{
+ struct nsa3xx_hwmon *hwmon = platform_get_drvdata(pdev);
+
+ nsa3xx_hwmon_free_gpios(pdev->dev.platform_data);
+ hwmon_device_unregister(hwmon->classdev);
+ sysfs_remove_group(&pdev->dev.kobj, &nsa3xx_attr_group);
+ platform_set_drvdata(pdev, NULL);
+ kfree(hwmon);
+
+ return 0;
+}
+
+static struct platform_driver nsa3xx_hwmon_driver = {
+ .probe = nsa3xx_hwmon_probe,
+ .remove = nsa3xx_hwmon_remove,
+ .driver = {
+ .name = "nsa3xx-hwmon",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(nsa3xx_hwmon_driver);
+
+MODULE_AUTHOR("Peter Schildmann <linux@schildmann.info>");
+MODULE_DESCRIPTION("NSA3XX Hardware Monitoring");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:nsa3xx-hwmon");
diff -ruN a/drivers/leds/Kconfig b/drivers/leds/Kconfig
--- a/drivers/leds/Kconfig 2018-10-20 01:52:38.000000000 -0600
+++ b/drivers/leds/Kconfig 2018-10-27 18:30:56.034359150 -0600
@@ -456,7 +456,7 @@
config LEDS_NS2
tristate "LED support for Network Space v2 GPIO LEDs"
depends on LEDS_CLASS
- depends on MACH_KIRKWOOD || MACH_ARMADA_370
+ depends on ARCH_KIRKWOOD || MACH_KIRKWOOD || MACH_ARMADA_370
default y
help
This option enables support for the dual-GPIO LEDs found on the
@@ -470,7 +470,7 @@
config LEDS_NETXBIG
tristate "LED support for Big Network series LEDs"
depends on LEDS_CLASS
- depends on MACH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
default y
help
This option enable support for LEDs found on the LaCie 2Big
diff -ruN a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
--- a/drivers/leds/trigger/Kconfig 2018-10-20 01:52:38.000000000 -0600
+++ b/drivers/leds/trigger/Kconfig 2018-10-27 18:30:56.034359150 -0600
@@ -35,7 +35,6 @@
config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger"
- depends on IDE_GD_ATA
depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by IDE disk activity.
diff -ruN a/drivers/leds/trigger/ledtrig-ide-disk.c b/drivers/leds/trigger/ledtrig-ide-disk.c
--- a/drivers/leds/trigger/ledtrig-ide-disk.c 2018-10-20 01:52:38.000000000 -0600
+++ b/drivers/leds/trigger/ledtrig-ide-disk.c 2018-10-27 18:30:56.038359130 -0600
@@ -18,25 +18,36 @@
#define BLINK_DELAY 30
-DEFINE_LED_TRIGGER(ledtrig_ide);
+DEFINE_LED_TRIGGER(ledtrig_ide1);
+DEFINE_LED_TRIGGER(ledtrig_ide2);
static unsigned long ide_blink_delay = BLINK_DELAY;
-void ledtrig_ide_activity(void)
+void ledtrig_ide_activity(int port_number)
{
- led_trigger_blink_oneshot(ledtrig_ide,
- &ide_blink_delay, &ide_blink_delay, 0);
+ switch (port_number) {
+ case 0:
+ led_trigger_blink_oneshot(ledtrig_ide1, &ide_blink_delay, &ide_blink_delay, 0);
+ break;
+ case 1:
+ led_trigger_blink_oneshot(ledtrig_ide2, &ide_blink_delay, &ide_blink_delay, 0);
+ break;
+ default:
+ break;
+ }
}
EXPORT_SYMBOL(ledtrig_ide_activity);
static int __init ledtrig_ide_init(void)
{
- led_trigger_register_simple("ide-disk", &ledtrig_ide);
+ led_trigger_register_simple("ide-disk1", &ledtrig_ide1);
+ led_trigger_register_simple("ide-disk2", &ledtrig_ide2);
return 0;
}
static void __exit ledtrig_ide_exit(void)
{
- led_trigger_unregister_simple(ledtrig_ide);
+ led_trigger_unregister_simple(ledtrig_ide1);
+ led_trigger_unregister_simple(ledtrig_ide2);
}
module_init(ledtrig_ide_init);
diff -ruN a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
--- a/drivers/mmc/core/core.c 2018-10-20 01:52:38.000000000 -0600
+++ b/drivers/mmc/core/core.c 2018-10-27 18:30:56.038359130 -0600
@@ -856,7 +856,7 @@
*/
limit_us = 3000000;
else
- limit_us = 100000;
+ limit_us = 200000;
/*
* SDHC cards always use these fixed values.
diff -ruN a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
--- a/drivers/mmc/core/sd.c 2018-10-20 01:52:38.000000000 -0600
+++ b/drivers/mmc/core/sd.c 2018-10-27 18:30:56.038359130 -0600
@@ -364,6 +364,15 @@
return -ENOMEM;
}
+ /*
+ * Some SDHC cards, notably those with a Sandisk SD controller
+ * (also found in Kingston products) need a bit of slack
+ * before successfully handling the SWITCH command. So far,
+ * cards identifying themselves as "SD04G" and "SD08G" are
+ * affected
+ */
+ udelay(100);
+
err = mmc_sd_switch(card, 1, 0, 1, status);
if (err)
goto out;
diff -ruN a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
--- a/drivers/mmc/host/mvsdio.c 2018-10-20 01:52:38.000000000 -0600
+++ b/drivers/mmc/host/mvsdio.c 2018-10-27 18:30:56.042359110 -0600
@@ -25,6 +25,7 @@
#include <linux/of_irq.h>
#include <linux/mmc/host.h>
#include <linux/mmc/slot-gpio.h>
+#include <linux/mmc/sd.h>
#include <asm/sizes.h>
#include <asm/unaligned.h>
@@ -152,6 +153,7 @@
dev_dbg(host->dev, "cmd %d (hw state 0x%04x)\n",
cmd->opcode, mvsd_read(MVSD_HW_STATE));
+ if (cmd->opcode == SD_SWITCH) mdelay(1); /* Voodoo */
cmdreg = MVSD_CMD_INDEX(cmd->opcode);
diff -ruN a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
--- a/drivers/rtc/Kconfig 2018-10-20 01:52:38.000000000 -0600
+++ b/drivers/rtc/Kconfig 2018-10-27 18:30:56.042359110 -0600
@@ -1378,7 +1378,7 @@
config RTC_DRV_MV
tristate "Marvell SoC RTC"
- depends on ARCH_DOVE || ARCH_MVEBU
+ depends on ARCH_KIRKWOOD || ARCH_DOVE || ARCH_MVEBU
help
If you say yes here you will get support for the in-chip RTC
that can be found in some of Marvell's SoC devices, such as
diff -ruN a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
--- a/drivers/thermal/Kconfig 2018-10-20 01:52:38.000000000 -0600
+++ b/drivers/thermal/Kconfig 2018-10-27 18:30:56.042359110 -0600
@@ -222,7 +222,7 @@
config KIRKWOOD_THERMAL
tristate "Temperature sensor on Marvell Kirkwood SoCs"
- depends on MACH_KIRKWOOD || COMPILE_TEST
+ depends on ARCH_KIRKWOOD || MACH_KIRKWOOD || COMPILE_TEST
depends on OF
help
Support for the Kirkwood thermal sensor driver into the Linux thermal
diff -ruN a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
--- a/drivers/watchdog/Kconfig 2018-10-20 01:52:38.000000000 -0600
+++ b/drivers/watchdog/Kconfig 2018-10-27 18:30:56.046359090 -0600
@@ -359,7 +359,7 @@
config ORION_WATCHDOG
tristate "Orion watchdog"
- depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU
+ depends on ARCH_ORION5X || ARCH_KIRKWOOD || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU
select WATCHDOG_CORE
help
Say Y here if to include support for the watchdog timer
diff -ruN a/include/linux/bubba3.h b/include/linux/bubba3.h
--- a/include/linux/bubba3.h 1969-12-31 17:00:00.000000000 -0700
+++ b/include/linux/bubba3.h 2018-10-27 18:30:56.046359090 -0600
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2010
+ * Excito elektronik i Skåne AB <www.excito.com>
+ * by: Tor Krill <tor@excito.com>
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __BUBBA3_H
+#define __BUBBA3_H
+
+/*
+ * GPIO definitions
+ */
+#define B3_LED_INTERVAL (37)
+#define B3_FRONT_LED_GREEN (38)
+#define B3_POWER_BUTTON (39)
+#define B3_BUZZER_ENABLE (40)
+#define B3_FRONT_LED_RED (41)
+#define B3_FRONT_LED_BLUE (42)
+#define B3_HW_ID0 (43)
+#define B3_HW_ID1 (44)
+#define B3_HW_ID2 (45)
+#define B3_BUZ_4KHZ (46)
+
+#endif
diff -ruN a/include/linux/leds.h b/include/linux/leds.h
--- a/include/linux/leds.h 2018-10-20 01:52:38.000000000 -0600
+++ b/include/linux/leds.h 2018-10-27 18:30:56.046359090 -0600
@@ -303,9 +303,9 @@
/* Trigger specific functions */
#ifdef CONFIG_LEDS_TRIGGER_IDE_DISK
-extern void ledtrig_ide_activity(void);
+extern void ledtrig_ide_activity(int port_number);
#else
-static inline void ledtrig_ide_activity(void) {}
+static inline void ledtrig_ide_activity(int port_number) {}
#endif
#if defined(CONFIG_LEDS_TRIGGER_CAMERA) || defined(CONFIG_LEDS_TRIGGER_CAMERA_MODULE)
diff -ruN a/include/linux/nsa3xx-hwmon.h b/include/linux/nsa3xx-hwmon.h
--- a/include/linux/nsa3xx-hwmon.h 1969-12-31 17:00:00.000000000 -0700
+++ b/include/linux/nsa3xx-hwmon.h 2018-10-27 18:30:56.050359069 -0600
@@ -0,0 +1,21 @@
+/*
+ * include/linux/nsa3xx.hwmon.h
+ *
+ * Platform data structure for ZyXEL NSA3xx hwmon driver
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __LINUX_NSA3XX_HWMON_H
+#define __LINUX_NSA3XX_HWMON_H
+
+struct nsa3xx_hwmon_platform_data {
+ /* GPIO pins */
+ unsigned act_pin;
+ unsigned clk_pin;
+ unsigned data_pin;
+};
+
+#endif /* __LINUX_NSA3XX_HWMON_H */
Reference in a new issue View git blame Copy permalink