archlinuxarm/PKGBUILDs
1
0
Fork 0
mirror of https://github.com/archlinuxarm/PKGBUILDs.git synced 2024-11-28 22:57:37 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
PKGBUILDs/community/sniffit/sniffit-fix.patch
root 11e8dac30c Added vanilla community PKGBUILDs
2009-10-09 21:15:33 -05:00

937 lines
36 KiB
Diff
Raw Blame History

--- sniffit.0.3.7.beta.orig/sniffit.5
+++ sniffit.0.3.7.beta/sniffit.5
@@ -122,7 +122,6 @@
a) Send by hosts '100.100.12.*'
b) Send from/to 100.100.12.2 (useless line)
c) deselecting all WWW packets on the subnet
-.ni
.SH AUTHOR
Brecht Claerhout <coder@reptile.rug.ac.be>
--- sniffit.0.3.7.beta.orig/sn_structs.h
+++ sniffit.0.3.7.beta/sn_structs.h
@@ -67,7 +67,7 @@
struct snif_mask /* struct for mask */
{
_32_bit source_ip, destination_ip;
- _32_bit short source_port, destination_port;
+ _16_bit source_port, destination_port;
};
/* (packet generation) */
--- sniffit.0.3.7.beta.orig/sniffit.0.3.7.c
+++ sniffit.0.3.7.beta/sniffit.0.3.7.c
@@ -48,15 +48,15 @@
{
printf (
"usage: %s [-xdabvnN] [-P proto] [-A char] [-p port] [(-r|-R) recordfile]\n"
- " [-l sniflen] [-L logparam] [-F snifdevice] [-M plugin]\n"
+ " [-l sniflen] [-L logparam] [-F snifdevice] [-M plugin]\n",
+ prog_name);
#ifdef INCLUDE_INTERFACE
- " [-D tty]"
+ printf ( " [-D tty]"
" (-t<Target IP> | -s<Source IP>)"
- " | (-i|-I) | -c<config file>]\n",
+ " | (-i|-I) | -c<config file>]\n");
#else
- " (-t<Target IP> | -s<Source IP>) | -c<config file>]\n",
+ printf ( " (-t<Target IP> | -s<Source IP>) | -c<config file>]\n");
#endif
- prog_name);
printf ("Plugins Available:\n");
#ifdef PLUGIN0_NAME
printf (" 0 -- %s\n", PLUGIN0_NAME);
--- sniffit.0.3.7.beta.orig/sn_analyse.c
+++ sniffit.0.3.7.beta/sn_analyse.c
@@ -151,16 +151,18 @@
{
char workbuf1[MTU];
char *wb_dummy;
+ char *p;
+ size_t len = info.DATA_len <= MTU-1 ? info.DATA_len : MTU-1;
- strncpy(workbuf1,data,info.DATA_len);
- workbuf1[info.DATA_len]=0;
+ strncpy(workbuf1,data,len);
+ workbuf1[len]=0;
strlower(workbuf1);
- if(strstr(workbuf1,"mail from")!=NULL)
+ if((p=strstr(workbuf1,"mail from"))!=NULL)
{
char workbuf2[MTU];
- strcpy(workbuf2, strstr(workbuf1,"mail from"));
+ strcpy(workbuf2, p);
if(strchr(workbuf2,13)!=NULL) /* remove trailing enter */
{wb_dummy=strchr(workbuf2,13); *wb_dummy=0;}
if(strchr(workbuf2,10)!=NULL)
@@ -168,11 +170,11 @@
print_mail(filename,workbuf2);
}
- if(strstr(workbuf1,"rcpt to")!=NULL)
+ if((p=strstr(workbuf1,"rcpt to"))!=NULL)
{
char workbuf2[MTU];
- strcpy(workbuf2, strstr(workbuf1,"rcpt to"));
+ strcpy(workbuf2, p);
if(strchr(workbuf2,13)!=NULL) /* remove trailing enter */
{wb_dummy=strchr(workbuf2,13); *wb_dummy=0;}
if(strchr(workbuf2,10)!=NULL)
--- sniffit.0.3.7.beta.orig/README.FIRST
+++ sniffit.0.3.7.beta/README.FIRST
@@ -6,7 +6,7 @@
* No illegal activities are encouraged! *
# Please read the LICENSE file #
* *
-# Sniffit grew a little upon it's original intentions and is now #
+# Sniffit grew a little upon its original intentions and is now #
* extended for network debugging (UDP, ICMP, netload, etc.) *
#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
* Libpcap library *
@@ -45,19 +45,19 @@
I hope you enjoy this beta version. Like always, I removed some bugs. There
is a new 'logging' feature. It is now possible to record traffic with
-Sniffit and process it later! (it is completely different from te logging
+Sniffit and process it later! (it is completely different from the logging
done in the 0.3.6 version, that is known to some hardcore Sniffit users)
Please take a minute to skim through the text and read the passages marked
with a '*', these are the new features.
(Please read BETA-TESTING)
-I use the libpcap library developped at Berkeley Laboratory, for easy
+I use the libpcap library developed at Berkeley Laboratory, for easy
porting (Read the licence).
0.1 Credits and contact
-----------------------
-Credits go to (in order of apperance on the Sniffit scene):
+Credits go to (in order of appearance on the Sniffit scene):
Wim Vandeputte <wvdputte@reptile.rug.ac.be>,
best friend and UNIX guru, for support, testing and
providing me with a WWW site.
@@ -71,17 +71,17 @@
Qing Long, for the bash/zsh libpcap/configure script.
Guy Gustavson, for giving me a FreeBSD account.
Woju <woju@freebsd.ee.ntu.edu.tw>, for the ncurses SunOS/FreeBSD fixing,
- and for his other effords.
+ and for his other efforts.
Amlan Saha <eng40607@nus.sg>, for adding Packet Generation to
Sniffit, and adding other features (not implemented yet).
I'm sure that in the near future you will see more of his
work in Sniffit.
Shudoh Kazuyuki, for changing getaddrbyname() and improving the
config-file interpreting.
- Fyodor <fyodor@dhp.com>, for pointing out the hidious small
+ Fyodor <fyodor@dhp.com>, for pointing out the hideous small
fragments problem.
David O'Brien <obrien@nuxi.com>, for netbsd information.
- everybody, who ever mailed me with sugestions help, etc...
+ everybody, who ever mailed me with suggestions help, etc...
Also a big thanks to my Beta testers (alphabetically, I hope)...
Charles G Stuart <charles.stuart@juno.com> IRIX / RedHat LINUX
@@ -91,7 +91,7 @@
And many others who wish to be anonymous....
-Sugestions and comments can be sent to:
+Suggestions and comments can be sent to:
coder@reptile.rug.ac.be
Brecht Claerhout
@@ -99,10 +99,10 @@
8700 Tielt
Belgium
-The original distribution program can be optained from (my site):
+The original distribution program can be obtained from (my site):
http://sniffit.rug.ac.be/sniffit/sniffit.html
-MIND YOU: this program is ran as root, and thus could easily contain
+MIND YOU: this program is run as root, and thus could easily contain
dangerous trojans. If you get it from the above site you can
safely compile and use it.
(no trojan versions are discovered yet.. it's just a warning)
@@ -178,7 +178,7 @@
-v Show version and exit (just added because it's such a
wide spread option)
-t <IP nr/name> tells the sniffer to check out packets GOING TO <IP>
- -s <IP nr/name> tells the sniffer to check out packets COMMING FROM <IP>
+ -s <IP nr/name> tells the sniffer to check out packets COMING FROM <IP>
You can use the '@' wildcard (only IP NUMBERS of course).
e.g. -t 199.145.@
-t 199.14@
@@ -197,15 +197,15 @@
Parameters for all modes:
-F <device> force sniffit to use a network device
(READ 3.2 ON THIS SUBJECT, IMPORTANT)
- -n Turn of IP checksum checking. This can show you
+ -n Turn off IP checksum checking. This can show you
bogus packets. (mind you ARP, RARP, other non-IP
packets will show up bogus too) (compatible with
ALL options)
- -N Disables all functions that Sniffit has build in, usefull
+ -N Disables all functions that Sniffit has build in, useful
for wanting to run ONLY a plugin
Parameters for not running in -i:
- -b does both -t and -s, doesn't mather what function you used
+ -b does both -t and -s, doesn't matter what function you used
(-t or -s)
-d Dump mode, shows the packets on the screen in bytes (not
like tcpdump). For test purposes. (numbers are hex)
@@ -231,7 +231,7 @@
They can be combined.
-p <port> Logs connections on port <port>, 0 means all ports, default
is 0 (all), look out with that on loaded nets!
- -l <length> Ammount of information to log (default 300 bytes).
+ -l <length> Amount of information to log (default 300 bytes).
Length 0 logs everything. (look out with diskspace when
logging everything!)
-M <Plugin> Activate Plugin nr. <Plugin>, for a list on all plugins
@@ -260,7 +260,7 @@
Some examples:
Imagine the following setup: 2 hosts on a subnet, one is running the
- sniffer (sniffit.com), the otherone is 66.66.66.7 (target.com).
+ sniffer (sniffit.com), the other one is 66.66.66.7 (target.com).
1. You want to test if the sniffer is working:
sniffit:~/# sniffit -d -p 7 -t 66.66.66.7
and in another window:
@@ -272,7 +272,7 @@
3. Root of target.com tells me he gets strange ftp connections and
wants to find out the commands typed:
sniffit:~/# sniffit -p 21 -l 0 -t 66.66.66.7
- 4. You want to read all incomming and outgoing mail on target.com:
+ 4. You want to read all incoming and outgoing mail on target.com:
sniffit:~/# sniffit -p 25 -l 0 -b -t 66.66.66.7 &
or
sniffit:~/# sniffit -p 25 -l 0 -b -s 66.66.66.7 &
@@ -314,9 +314,9 @@
F5 or '5' : Start a program 'sniffit_key5' with arguments
<from IP> <from port> <to IP> <to port>
If the program doesn't exist, nothing is done. Sniffit should
- be in the same path as sniffit was STARTED FROM (not necessarely
+ be in the same path as sniffit was STARTED FROM (not necessarily
the path sniffit is stored in)
- This is usefull for interactive connection killing or extra
+ This is useful for interactive connection killing or extra
monitoring. A little shell script can always transform the
arguments given and pass them on to other programs.
F6 or '6' : Same as F5 or '5', but with program 'sniffit_key6'
@@ -330,12 +330,12 @@
the config.h file to change this (could be needed if y'r
computer is slow).
'g' : Generate Packets!
- Sniffit is now able to generate some trafic load. Currently
- this is a 'underdevelloped' feature with very few options,
+ Sniffit is now able to generate some traffic load. Currently
+ this is a 'underdeveloped' feature with very few options,
but it will be expanded a lot...
Currently only UDP packets are generated. When pressing 'G'
- you will be asked the source/dest IP/port and how much packets
- are needed to be transmitted.
+ you will be asked the source/dest IP/port and how many packets
+ are to be transmitted.
Packets contain the line: "This Packet was fired with Sniffit!"
'r' : Reset.. clears all current connections from memory and restarts.
@@ -348,14 +348,14 @@
When forcing network devices, sniffit tries to find out what device it is.
If sniffit recognises the name, everything is okay.
-If it does not recognise the name it will set the variable
-FORCED_HEAD_LENGHTH to the ethernet headlength. The ethernet headlength
-is the length in bytes of an ethernet packet hearder.
-So if you have to force a non-ethernet device, that is not recognised by
+If it does not recognise the name it will set the ethernet headlength
+according to the compiled-in value FORCED_HEAD_LENGTH. The ethernet
+headlength is the length in bytes of an ethernet packet header.
+So if you have to force a non-ethernet device that is not recognised by
sniffit, make sure you change that headlength correctly in the 'sn_config.h'
file.
-The -F option was added, because I noticed devicenames can differ from
+The -F option was added, because I noticed device names can differ from
system to system, and because some ppl have multiple devices present.
When having problems with this option, please think twice before you mail me.
@@ -370,7 +370,7 @@
The configfile should have lines with the following format:
<field1> <field2> <field3> <field4> [<field5>]
-(seperators are spaces (any number of), NO TABS!!!)
+(separators are spaces (any number of), NO TABS!!!)
Lines that don't match this pattern are discarded, so standard unix
comments '#' can be used in this file... (this also means that if you
@@ -399,10 +399,10 @@
host : The (de)selection criteria involves a hostname.
port : similar, ... a portnumber
mhosts : The (de)selection criteria involves multiple-hosts, like
- with the wildcars in 0.3.0, but without the 'x'
+ with the wildcards in 0.3.0, but without the 'x'
<field4> can be:
-* either a hostname, a portnumber, a service name or a numbet-dot partial
+* either a hostname, a portnumber, a service name or a number-dot partial
* notation indicating multiple hosts depending on <field3>
* (service names like 'ftp' are resolved as the services available
* present on the host that runs Sniffit, and translated into a port nr)
@@ -411,7 +411,7 @@
a portnumber or service name, if <field3> was 'host' or 'mhosts'
- Maybe it would have been wise to mention explicitely, that the config-file
+ Maybe it would have been wise to mention explicitly, that the config-file
currently only works with TCP packets.
examples:
@@ -425,7 +425,7 @@
a) Send by host 100.100.12.2
b) Send by host 100.100.12.3 from port 1400
c) Send to coder.sniffit.com
- d) All packets on our subnet going to or comming from a telnet port.
+ d) All packets on our subnet going to or coming from a telnet port.
2. another example:
select both mhosts 100.100.12.
@@ -436,7 +436,7 @@
b) EXCEPT the WWW packets
c) BUT showing the WWW packets concerning enemy.sniffit.com
- The config file in interpreted SEQUENTIAL, so mixing up those lines
+ The config file is interpreted SEQUENTIALLY, so mixing up those lines
could have unwanted results e.g.:
select both mhosts 100.100.12.
select both host enemy.sniffit.org
@@ -455,7 +455,7 @@
select both mhosts 2
deselect both mhosts 1 80
deselect both mhosts 2 80
- This would show you all subnet trafic excluding WWW trafic
+ This would show you all subnet traffic excluding WWW traffic
(concerning port 80.)
4. example:
@@ -476,12 +476,12 @@
* you will like it more this way.
*
* Loglevels are now activated by '-L <logparam>'.
-* The folowing <logparam>'s are valid (concatenation is alowed):
+* The following <logparam>'s are valid (concatenation is allowed):
*
* 'raw':
* Log all SYN, FIN, RST packets. This will give you an overview of
-* all network (TCP) trafic in a 'RAW' way (a connection starting could
-* gives you at least 2 SYN packets, etc...).
+* all network (TCP) traffic in a 'RAW' way (a connection starting could
+* give you at least 2 SYN packets, etc...).
* This is a great way to waste diskspace...
* Messages are:
* Connection initiated. (SYN)
@@ -507,7 +507,7 @@
* A '~' in the login and passwords fields can be a nonprintable
* character (if in the beginning of a field, probably due to an early
* start of registration) or a '~'.
-* This all makes it sound a little messy, but I 'testdrived' a lot and
+* This all makes it sound a little messy, but I 'test-drove' a lot and
* was pleased with the results after adding some funky shit (if y'r
* interested have a look at in function 'packethandler' in
* sniffit.*.c)
@@ -521,7 +521,7 @@
*
* 'mail':
* Interested in who writes mail to who? Well you get all senders and
-* recepients nicely logged with this feature (port 25 mail).
+* recipients nicely logged with this feature (port 25 mail).
4. The output
@@ -563,7 +563,7 @@
connections, you will need to use 'joe' or something else that can
support control chars (look for '-A <char>' below).
Telnet 'negotiates' (binary) in the beginning of every connection, and
- 'catting' a output file, will most of the time show nothing (due to
+ 'catting' an output file, will most of the time show nothing (due to
control chars).
Of course when logging mail, there are no problems.
The new '-A <char>' takes care of the control characters, that way you
@@ -612,14 +612,14 @@
- UDP Packets (not logged, displayed)
- You get the package id. When using -d, -a you get the contence of the
+ You get the package id. When using -d, -a you get the contents of the
package. (pretty basic)
4.2 Logfile
-----------
-If you use a configfile (-c) and enable the Logging option a logfile is
+If you use a configfile (-c) and enable the Logging option, a logfile is
created. Unless you set 'logfile' in the config file, that file will be
named 'sniffit.log'.
It will contain lines with the following FIXED format:
@@ -635,7 +635,7 @@
3) Lines containing other data (future versions), will NOT begin with '['
and will have also easily interpretable formats.
- Other data is e.g. packet contence
+ Other data is e.g. packet contents
I do this because I can imagine (when this is more expanded) that people
will use their own parsers for these logfiles. Well, if you respect those 3
@@ -651,13 +651,13 @@
Some other notes:
- Sniffers can only be run by ROOT
- - Sniffers can only log packets that 'travel' on THEIR ethernetcable.
+ - Sniffers can only log packets that 'travel' on THEIR ethernet cable.
So there has to be some host on your subnet involved (either as
sender or receiver).
- - Working with '-d' or '-a' give you raw packets, they are still
- packed in IP, when logging to files, only send data is logged,
+ - Working with '-d' or '-a' gives you raw packets, they are still
+ packed in IP, when logging to files, only sent data is logged,
the packets are 'unwrapped'.
- - Sniffers can NORMALY not be detected by outsiders (or outsiders
+ - Sniffers can NORMALLY not be detected by outsiders (or outsiders
SHOULD not be able to...).
Unfortunately some systems contain bugs that will allow outsiders to
probe your network device for PROMISC mode (which is a good indication
--- sniffit.0.3.7.beta.orig/sniffit.8
+++ sniffit.0.3.7.beta/sniffit.8
@@ -39,7 +39,7 @@
is a packet sniffer for TCP/UDP/ICMP packets.
.B sniffit
is able to give you very detailed technical info on these
-packets (SEQ, ACK, TTL, Window, ...) but also packet contence in
+packets (SEQ, ACK, TTL, Window, ...) but also packet contents in
different formats (hex or plain text, ...).
.LP
.B sniffit
@@ -76,7 +76,7 @@
.IP "-t Target-IP"
Only process packets TO Target-IP. If Target-IP is in dot-nr notation,
-'x' is allowed as wildcard. (e.g. '-t 157.193.x', '-t x', ...)
+\'x' is allowed as wildcard. (e.g. '-t 157.193.x', '-t x', ...)
.I "(NOT compatible with: '-s' '-i' '-I' '-c' '-v' '-L')"
.IP "-s Source-IP"
@@ -84,7 +84,7 @@
.I "(NOT compatible with: '-t' '-i' '-I' '-c' '-v' '-L')"
.IP -b
-'both' mode, together with '-s' or '-t', only process FROM/TO the IP
+\'both' mode, together with '-s' or '-t', only process FROM/TO the IP
specified by '-s' or '-t'
.I "(NOT compatible with: '-t' '-i' '-I' '-c' '-v' '-L')"
@@ -115,7 +115,7 @@
.IP "-R <file>"
Record all traffic in
.I <file>
-.This file can then be fed to Sniffit with the '-r' option.
+This file can then be fed to Sniffit with the '-r' option.
.I "(Needs a selection parameter like '-c' '-t' '-s')"
.I "(NOT compatible with '-i' '-I' '-v' '-L' '-r')"
@@ -149,12 +149,12 @@
.I "(NOT compatible with: '-i' 'I' '-v')"
.IP -d
-'dump mode', shows the packets on the screen (stdout) instead of logging
+\'dump mode', shows the packets on the screen (stdout) instead of logging
into files (default). Data is printed in bytes (hex).
.I "(NOT compatible with: '-i' 'I' '-v' '-L')"
.IP -a
-'dump mode', same of '-d' but outputs ASCII. Non printable chars are
+\'dump mode', same of '-d' but outputs ASCII. Non printable chars are
replaced by '.'.
('-d' and '-a' mix without any problem)
.I "(NOT compatible with: '-i' '-I' '-v' '-L')"
@@ -193,8 +193,7 @@
can be found with
.I ifconfig
(see
-.BR ifconfig (8)
-).
+.BR ifconfig (8)).
.B sniffit
supports ethernet and PPP by default. Read
.B README.FIRST
@@ -210,7 +209,7 @@
.B Plugin
, for a list on all plugins compiled in your version, just type '
.B sniffit
-'. Read all about Plugins in the PLUGIN-HOWTO (READ IT!)
+\'. Read all about Plugins in the PLUGIN-HOWTO (READ IT!)
.I "(NOT compatible with: '-i' '-I' '-v')"
.IP "-L logparam"
@@ -235,7 +234,7 @@
receiving host (port 'o').
.SH "DUMP MODE ('-d' and/or '-a')"
-Output is dumped to stdout, the packet contence is shown in it's
+Output is dumped to stdout, the packet contents is shown in it's
unwrapped form (the complete IP packet).
.SH "INTERACTIVE MODE ('-i' or '-I')"
@@ -320,7 +319,7 @@
.SH "IP ICMP UDP LOGGING"
Information on these packets is dumped to stdout. Packet
Filtering options only refer to TCP and UDP packets.
-The contence of UDP packets is only shown when enabling '-a' or '-d'.
+The contents of UDP packets is only shown when enabling '-a' or '-d'.
.SH AUTHOR
Brecht Claerhout <coder@reptile.rug.ac.be>
--- sniffit.0.3.7.beta.orig/sn_interface.c
+++ sniffit.0.3.7.beta/sn_interface.c
@@ -5,6 +5,7 @@
#ifdef INCLUDE_INTERFACE
#include <signal.h>
+#include <termios.h>
#include <unistd.h>
#include <sys/ipc.h>
#include <sys/shm.h>
@@ -513,8 +514,11 @@
void screen_exit (void)
{
-clear();
endwin();
+/* next line added by Edward Betts <edward@debian.org>, should not be needed
+ * because endwin should be calling it, without this the console has no echo
+ * after exiting in an xterm */
+reset_shell_mode();
};
void mem_exit (void)
--- sniffit.0.3.7.beta.orig/sn_logfile.c
+++ sniffit.0.3.7.beta/sn_logfile.c
@@ -44,42 +44,42 @@
void print_ftp_user (char *conn, char *user)
{
char line[250];
-sprintf(line,"%s: USER [%s]",conn,user);
+snprintf(line,sizeof(line),"%s: USER [%s]",conn,user);
print_logline (line);
}
void print_ftp_pass(char *conn, char *pass)
{
char line[250];
-sprintf(line,"%s: PASS [%s]",conn,pass);
+snprintf(line,sizeof(line),"%s: PASS [%s]",conn,pass);
print_logline (line);
}
void print_login (char *conn, char *login)
{
char line[250];
-sprintf(line,"%s: login [%s]",conn,login);
+snprintf(line,sizeof(line),"%s: login [%s]",conn,login);
print_logline (line);
}
void print_mail (char *conn, char *msg)
{
char line[250];
-sprintf(line,"%s: mail [%s]",conn,msg);
+snprintf(line,sizeof(line),"%s: mail [%s]",conn,msg);
print_logline (line);
}
void print_pwd (char *conn, char *pwd)
{
char line[250];
-sprintf(line,"%s: password [%s]",conn,pwd);
+snprintf(line,sizeof(line),"%s: password [%s]",conn,pwd);
print_logline (line);
}
void print_conn (char *conn, char *msg)
{
char line[250];
-sprintf(line,"%s: %s",conn,msg);
+snprintf(line,sizeof(line),"%s: %s",conn,msg);
print_logline (line);
}
--- sniffit.0.3.7.beta.orig/Makefile.in
+++ sniffit.0.3.7.beta/Makefile.in
@@ -26,9 +26,8 @@
@echo "Succesfull compilation..."
sniffit: $(SNIFFIT) $(DEP_FILES)
- cd libpcap; make; cd ..
+# cd libpcap; make; cd ..
$(CC) $(EXE_FLAG) $(SNIFFIT) $(EXE_OBJ) $(EXE_OPT) $(LIBS) $(DEFS) $(OS_OPT)
- strip sniffit
sn_cfgfile.o: sn_cfgfile.h sn_cfgfile.c sn_defines.h sn_structs.h sn_config.h
$(CC) $(OBJ_FLAG) sn_cfgfile.c $(OBJ_OPT) $(DEFS)
@@ -52,12 +51,12 @@
#Clean up everthing...
clean:
- cd libpcap; make clean; rm -f config.cache; cd ..
+# cd libpcap; make clean; rm -f config.cache; cd ..
rm -f Makefile
rm -f config.cache
rm -f config.status
rm -f config.log
- rm -f ./libpcap/config.cache
- rm -f ./libpcap/config.status
- rm -f ./libpcap/config.log
+# rm -f ./libpcap/config.cache
+# rm -f ./libpcap/config.status
+# rm -f ./libpcap/config.log
rm -f *.o sniffit
--- sniffit.0.3.7.beta.orig/debian/rules
+++ sniffit.0.3.7.beta/debian/rules
@@ -0,0 +1,28 @@
+#!/usr/bin/make -f
+
+build:
+ dh build --before configure
+ cp /usr/share/misc/config.guess .
+ cp /usr/share/misc/config.sub .
+ ./configure --prefix=/usr --no-recursion
+ $(MAKE) OBJ_OPT="" EXE_OPT="-lpcap"
+ dh build --after build
+
+clean:
+ dh clean
+ rm -f config.sub config.guess
+
+install: build
+ dh install --before dh_auto_install
+ dh_install sniffit usr/sbin
+ dh_installman sniffit.5 sniffit.8
+ dh_installchangelogs HISTORY
+ dh install --after dh_auto_install
+
+binary-arch: install
+ dh binary-arch
+
+binary-indep: install
+ dh binary-indep
+
+binary: binary-arch binary-indep
--- sniffit.0.3.7.beta.orig/debian/README
+++ sniffit.0.3.7.beta/debian/README
@@ -0,0 +1,48 @@
+sniffit for Debian
+----------------------
+
+What follows are one of the previous maintainers, Patrick J. Edwards
+<edwards@cambridgenet.sk.ca>, thoughts on this package, and its security
+implications.
+
+Notes on Security
+-----------------
+ This program is highly dangerous, with this program hackers no
+longer need qcrack or crack for your system. Instead, they can just wait
+till a user logs in and *BAM* they have a new password. So the point is,
+this program should be promptly removed in any of the following situations:
+
+ 1. You are in doubt of the security of your system. Granted that
+ some one who has already creatively aquired (meaning hacked) root
+ can install this program his/her self there is no point in
+ pre-installing this program for them.
+
+ 2. You have a tendency to act unethically and snoop on you users for
+ no apparent reason. "Good" system admins won't do this.
+
+ 3. You don't actively search for security holes in your system. If
+ your not doing this and you box is on the Internet 24/7 perhaps you
+ should.
+
+Notes on Usage
+--------------
+ 1. Don't use this program unless you have to, and once you're done
+with it uninstall it.
+ 2. Don't scan all ports and all addresses in the hoping of catching
+a hacker cause you won't, you'll just have vast quantities of logs to search
+through and very little disk space. Instead wait till you recognize that you
+have a program user/hacker and then find out what the person is doing (how
+the hacker is trying to penetrate the system) then start using sniffit to
+collect your evidence against the offender. [I know this is flying in the
+face of traditional anti-system-terrorism policies but it leads into my next
+point]
+ 3. If you persist in using sniffit as a security net for your system
+DON'T. Plain and simple. Instead of trying to catch the hacker who has
+already hacked into your system spend your efforts security proofing your
+system (up to date versions on cron, sendmail, libraries, etc -- almost
+anything that runs as root or sudo).
+
+ The overall point is:
+ "Practice preventive medicine not reactive."
+
+ -- Edward Betts <edward@debian.org> Sun, 12 Sep 1999 11:04:08 +0100
--- sniffit.0.3.7.beta.orig/debian/sniffit.docs
+++ sniffit.0.3.7.beta/debian/sniffit.docs
@@ -0,0 +1,4 @@
+BETA-TESTING
+PLUGIN-HOWTO
+README.FIRST
+sniffit-FAQ
--- sniffit.0.3.7.beta.orig/debian/compat
+++ sniffit.0.3.7.beta/debian/compat
@@ -0,0 +1 @@
+7
--- sniffit.0.3.7.beta.orig/debian/control
+++ sniffit.0.3.7.beta/debian/control
@@ -0,0 +1,16 @@
+Source: sniffit
+Section: net
+Priority: optional
+Maintainer: William Vera <billy@billy.com.mx>
+Standards-Version: 3.8.0
+Build-Depends: debhelper (>= 7), libpcap-dev, libncurses5-dev, autotools-dev
+
+Package: sniffit
+Architecture: any
+Depends: ${shlibs:Depends}
+Description: packet sniffer and monitoring tool
+ sniffit is a packet sniffer for TCP/UDP/ICMP packets.
+ sniffit is able to give you very detailed technical info
+ on these packets (SEC, ACK, TTL, Window, ...) but also
+ packet contents in different formats (hex or plain text,
+ etc. ).
--- sniffit.0.3.7.beta.orig/debian/copyright
+++ sniffit.0.3.7.beta/debian/copyright
@@ -0,0 +1,40 @@
+This package was debianized by Damjan Marion <dmarion@debian.org> on
+Tue, 7 Apr 1998 22:57:01 +0200.
+
+It was taken over by Edward Betts <edward@debian.org> on
+Fri, 12 Nov 1999 23:20:20 +0000
+
+It was downloaded from
+http://reptile.rug.ac.be/~coder/sniffit/files/sniffit.0.3.7.beta.tar.gz
+
+Upstream Author: Brecht Claerhout
+
+Copyright:
+
+Sniffit 0.3.7 Copyright (c) 1996-1998 Brecht Claerhout
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+3. The name of the author may not be used to endorse or promote products
+ derived from this software without specific prior written permission.
+4. Redistribution of source code must be conform with the 'libpcap'
+ copyright conditions, if that library is included.
+
+THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
--- sniffit.0.3.7.beta.orig/debian/changelog
+++ sniffit.0.3.7.beta/debian/changelog
@@ -0,0 +1,165 @@
+sniffit (0.3.7.beta-13) unstable; urgency=low
+
+ * New maintainer. (Closes: #465931).
+ * Some format corrections on the man pages (sniffit(5) sniffit(8)).
+ * Don't include config.{sub,guess} in .diff.gz
+
+ -- William Vera <billy@billy.com.mx> Sat, 07 Jun 2008 12:56:48 -0500
+
+sniffit (0.3.7.beta-12) unstable; urgency=low
+
+ * Use debhelper v7, rules file minimisation.
+ * Makefile.in: don't strip binary Closes: #438032
+ * debian/control: Updated to Standards-Version: 3.7.3, no changes needed
+
+ -- Edward Betts <edward@debian.org> Wed, 30 Apr 2008 11:00:19 +0100
+
+sniffit (0.3.7.beta-11) unstable; urgency=low
+
+ * Acknowledge NMU
+ * sn_structs.h: Sitting at Debcamp, fixing FTBFS bugs, and Alberto Gonzalez
+ Iniesta <agi@debian.org> sitting next to me points out there is one in
+ this package. Thanks to Joshua Kwan <joshk@triplehelix.org> for the patch
+ to fix it. (closes: #195548)
+ * config.{guess,sub}: updated
+ * debian/control: Updated to Standards-Version: 3.6.0, no changes needed
+ * sn_interface.c: sniffit was leaving echo turned off when exiting from the
+ interactive mode in an xterm, added reset_shell_mode() to screen_exit()
+ and it works. This should not be needed because endwin should be calling
+ it.
+
+ -- Edward Betts <edward@debian.org> Mon, 14 Jul 2003 10:50:24 +0200
+
+sniffit (0.3.7.beta-10.1) unstable; urgency=low
+
+ * Non maintainer upload
+ * Rebuilt with new libpcap to remove dependency on libpcap0, which I
+ got removed from unstable by accident. Sorry about this...
+
+ -- Torsten Landschoff <torsten@debian.org> Sat, 10 Aug 2002 11:37:33 +0200
+
+sniffit (0.3.7.beta-10) unstable; urgency=low
+
+ * README.FIRST: apply patch "James R. Van Zandt" <jrv@mitre.org> to correct
+ spelling and other mistakes in README.FIRST
+
+ -- Edward Betts <edward@debian.org> Thu, 13 Dec 2001 17:35:25 +0000
+
+sniffit (0.3.7.beta-9) unstable; urgency=low
+
+ * debian/control: Standards-Version: 3.5.5
+ * debian/rules: Support DEB_BUILD_OPTIONS
+ * config.{guess,sub}: updated files to version from libtool package
+ (Closes: Bug#103633)
+ * sniffit.c: applied patch from Bug#103633
+
+ -- Edward Betts <edward@debian.org> Thu, 5 Jul 2001 10:44:23 +0200
+
+sniffit (0.3.7.beta-8) unstable; urgency=low
+
+ * debian/control: Standards-Version: 3.5.2
+ * debian/rules: Changed to debhelper 3
+ * debian/rules: Removed dh_suidregister
+ * debian/rules: Removed dh_testversion
+ * debian/rules: Changed dh_installman to dh_installmanpages
+ * debian/rules: Support DEB_BUILD_OPTIONS
+
+ -- Edward Betts <edward@debian.org> Sun, 25 Mar 2001 04:41:39 -0700
+
+sniffit (0.3.7.beta-7) frozen unstable; urgency=high
+
+ * debian/rules: do not install pcap.3 (closes: Bug#77769).
+ * debian/control: updated Standards-Version to 3.2.1
+ * debian/control: added version to build-depends on debhelper for lintian:
+ E: sniffit: package-uses-dh_testversion-but-lacks-versioned-build-depends
+ * Package now lintian clean.
+
+ -- Edward Betts <edward@debian.org> Tue, 28 Nov 2000 07:00:24 -0700
+
+sniffit (0.3.7.beta-6.1) frozen unstable; urgency=high
+
+ * Non maintainer upload.
+ * [security] sn_logfile.c: Replaced sprintfs by snprintfs fixing a buffer
+ overflow (bugtraq).
+ * [security] sn_analyse.c: Limit length of TCP packets to the buffer
+ size (buffer overflow with MTU > 5000).
+
+ -- Torsten Landschoff <torsten@debian.org> Fri, 26 May 2000 08:40:14 +0200
+
+sniffit (0.3.7.beta-6) frozen unstable; urgency=low
+
+ * Update config.{guess,sub} to versions from the automake package.
+ Should now compile better on ARM (closes: Bug#56915).
+
+ -- Edward Betts <edward@debian.org> Thu, 3 Feb 2000 09:22:16 +0000
+
+sniffit (0.3.7.beta-5) unstable; urgency=low
+
+ * debian/control: updated Standards-Version to 3.1.1
+ * debian/control: added Build-Depends.
+ * debian/rules: rewritten.
+
+ -- Edward Betts <edward@debian.org> Thu, 6 Jan 2000 23:12:32 +0000
+
+sniffit (0.3.7.beta-4) unstable; urgency=low
+
+ * Recompile to try and fix bug #49979
+
+ -- Edward Betts <edward@debian.org> Fri, 12 Nov 1999 23:21:17 +0000
+
+sniffit (0.3.7.beta-3) unstable; urgency=low
+
+ * Changed to Debhelper 2.0
+ * Updated to Standards-Version: 3.0.1
+ * This package includes a copy of libpcap, ensured that it is not built
+ * Moved config file /etc/sniffit.cfg to
+ /usr/doc/sniffit/examples/sample_config_file
+ * Lintain clean
+
+ -- Edward Betts <edward@debian.org> Fri, 12 Nov 1999 23:20:20 +0000
+
+sniffit (0.3.7.beta-2) unstable; urgency=low
+
+ * Updated /usr/doc/sniffit/copyright from README.FIRST (fixes #39765)
+ * sniffit 0.3.7.beta is free software (BSD-like license)
+ * Changed section to main/net
+ * Added conffiles entry for /etc/sniffit.cfg
+
+ -- Hamish Moffatt <hamish@debian.org> Fri, 25 Jun 1999 22:30:00 +1000
+
+sniffit (0.3.7.beta-1) unstable; urgency=low
+
+ * QA group upload
+ * New upstream release (fixes #28510)
+ * Fixed spelling error in description (fixes #26859)
+ * Recompiled with ncurses 4.0 (fixes #37431)
+
+ -- Hamish Moffatt <hamish@debian.org> Sun, 23 May 1999 01:03:00 +1000
+
+sniffit (0.3.5-3) frozen unstable; urgency=low
+
+ * After long waiting for new copyright i must move it to non-free
+ (fixes bug #21832)
+
+ -- Damjan Marion <dmarion@debian.org> Thu, 28 May 1998 15:10:35 +0200
+
+sniffit (0.3.5-2) frozen unstable; urgency=low
+
+ * Moved to frozen (resurected from orphaned)
+ * Updated to standards 2.4.1.0
+
+ -- Damjan Marion <dmarion@debian.org> Tue, 15 Apr 1998 23:56:11 +0200
+
+sniffit (0.3.5-1) unstable; urgency=low
+
+ * New maintainer
+ * New upstream release
+ * Updated to standards 2.4.0.0
+
+ -- Damjan Marion <dmarion@debian.org> Tue, 7 Apr 1998 22:57:01 +0200
+
+sniffit (0.3.3-1) unstable; urgency=low
+
+ * Initial Release.
+
+ -- Patrick J. Edwards <edwards@cambridgenet.sk.ca> Mon, 17 Mar 1997 17:46:24 -0600
--- sniffit.0.3.7.beta.orig/debian/sniffit.examples
+++ sniffit.0.3.7.beta/debian/sniffit.examples
@@ -0,0 +1,3 @@
+sample_config_file
+dns_plugin.plug
+dummy_plugin.plug
--- sniffit.0.3.7.beta.orig/debian/watch
+++ sniffit.0.3.7.beta/debian/watch
@@ -0,0 +1,2 @@
+version=3
+http://reptile.rug.ac.be /~coder/sniffit/files/ sniffit.(.*)\.tar\.gz debian uupdate
Reference in a new issue View git blame Copy permalink