Welcome to my page! The goal of this project is to have a **fully non-destructive** upgrade path to [Klipper](https://www.klipper3d.org/), on a Bambu Lab P1S. This means replacing the existing electronics with open-source hardware. My project right now is in the works, but should be fully working hopefully soon. Stick around for updates.
Upon further inspection the SSR appears to be reusable, I need to probe the pins with my multimeter to find the controlling pins in their PicoBlade connector. Then I can wire those up to the new control board for controlling the AC bed.
Bed thermistor is confirmed as a NTC 100kΩ 3950. Can be configured as Generic 3950 in klipper config. Shows accurate temperature readings from my old bed, which I removed and added my own JST connector onto.
I have designed a quick PCB from JLCPCB that can convert the stock PicoBlade connectors of the Chamber Exhaust fan, and Aux Cooling fan, to be easily converted to a JST connector. Just plug and play. Will test if it works once those arrive, these are ridding of the PWM control sadly, so I am unsure if they even work. Atleast not at their true full power. But I will test their functionality as soon as they arrive.
