mirror of
https://github.com/ChazLayyd/Bambu-Lab-Klipper-Conversion.git
synced 2025-01-21 22:34:02 +00:00
347 lines
7.2 KiB
INI
347 lines
7.2 KiB
INI
# THIS IS A BETA PRINTER.CFG FILE FOR THE BAMBU LAB P1 KLIPPER PROJECT ON A BIGTREETECH MANTA M5P, THIS CFG MAY NOT BE FINAL. USE AT YOUR OWN RISK.
|
|
|
|
# This file contains common pin mappings for the BIGTREETECH Manta M5P
|
|
# To use this config, the firmware should be compiled for the
|
|
# STM32G0B1 with a "8KiB bootloader" "8 MHz crystal"
|
|
# and "USB (on PA11/PA12)" or "CAN bus (on PD0/PD1)".
|
|
|
|
# See docs/Config_Reference.md for a description of parameters.
|
|
|
|
########################################
|
|
# Printer and MCU configuration
|
|
########################################
|
|
|
|
[include mainsail.cfg]
|
|
[include macros.cfg]
|
|
[exclude_object]
|
|
[include KAMP_Settings.cfg]
|
|
#[include neopixel.cfg]
|
|
#[include moonraker_obico_macros.cfg]
|
|
|
|
[mcu host]
|
|
serial: /tmp/klipper_host_mcu
|
|
|
|
[mcu]
|
|
serial: /dev/serial/by-id/usb-Klipper_stm32g0b1xx_260049001950425938323120-if00
|
|
|
|
[printer]
|
|
kinematics: corexy
|
|
max_velocity: 400
|
|
max_accel: 15000
|
|
max_z_velocity: 15
|
|
max_z_accel: 100
|
|
|
|
[input_shaper]
|
|
shaper_freq_x: 66.2
|
|
shaper_type_x: mzv
|
|
shaper_freq_y: 56.0
|
|
shaper_type_y: mzv
|
|
|
|
#[force_move]
|
|
#enable_force_move: True
|
|
|
|
########################################
|
|
# Stepper Motor Configuration
|
|
########################################
|
|
|
|
[stepper_x]
|
|
step_pin: PA10
|
|
dir_pin: !PA14
|
|
enable_pin: !PA13
|
|
microsteps: 16
|
|
rotation_distance: 40
|
|
endstop_pin: tmc2209_stepper_x:virtual_endstop
|
|
position_endstop: 256
|
|
position_max: 256
|
|
homing_speed: 60
|
|
homing_retract_dist: 5
|
|
|
|
[stepper_y]
|
|
step_pin: PC6
|
|
dir_pin: !PC7
|
|
enable_pin: !PA9
|
|
microsteps: 16
|
|
rotation_distance: 40
|
|
endstop_pin: tmc2209_stepper_y:virtual_endstop
|
|
position_endstop: 0
|
|
position_max: 267
|
|
homing_speed: 60
|
|
homing_retract_dist: 0
|
|
|
|
[stepper_z]
|
|
step_pin: PB12
|
|
dir_pin: !PB11
|
|
enable_pin: !PA8
|
|
microsteps: 16
|
|
rotation_distance: 8
|
|
gear_ratio: 3:1
|
|
endstop_pin: probe:z_virtual_endstop
|
|
#position_endstop: 0.0
|
|
position_max: 250
|
|
position_min: -5
|
|
homing_speed: 10
|
|
second_homing_speed: 5
|
|
full_steps_per_rotation: 200
|
|
|
|
[extruder]
|
|
step_pin: PB0
|
|
dir_pin: !PB1
|
|
enable_pin: !PC4
|
|
microsteps: 16
|
|
rotation_distance: 0.825
|
|
gear_ratio: 9:53
|
|
nozzle_diameter: 0.400
|
|
filament_diameter: 1.750
|
|
heater_pin: PC5
|
|
sensor_type: ATC Semitec 104NT-4-R025H42G
|
|
sensor_pin: PA1
|
|
#control: mpc
|
|
heater_power: 48
|
|
cooling_fan: fan
|
|
filament_diameter: 1.75
|
|
filament_density: 1.25
|
|
filament_heat_capacity: 1.8
|
|
#pid_Kp: 33.513
|
|
#pid_Ki: 14.895
|
|
#pid_Kd: 18.851
|
|
min_temp: -100
|
|
max_temp: 280
|
|
max_extrude_only_distance: 100
|
|
max_extrude_cross_section: 50
|
|
|
|
[tmc2209 stepper_x]
|
|
uart_pin: PD8
|
|
run_current: 1.2
|
|
hold_current: 0.6
|
|
diag_pin: ^PD2
|
|
driver_SGTHRS: 110
|
|
interpolate: True
|
|
stealthchop_threshold: 0
|
|
sense_resistor: 0.110
|
|
|
|
[tmc2209 stepper_y]
|
|
uart_pin: PB10
|
|
run_current: 1.2
|
|
hold_current: 0.6
|
|
diag_pin: ^PC3
|
|
driver_SGTHRS: 110
|
|
interpolate: True
|
|
stealthchop_threshold: 0
|
|
sense_resistor: 0.110
|
|
|
|
[tmc2209 stepper_z]
|
|
uart_pin: PB2
|
|
run_current: 0.500
|
|
hold_current: 0.5
|
|
diag_pin: PC3
|
|
interpolate: True
|
|
stealthchop_threshold: 0
|
|
sense_resistor: 0.110
|
|
|
|
[tmc2209 extruder]
|
|
uart_pin: PA6
|
|
run_current: 0.600
|
|
diag_pin: PC2
|
|
interpolate: False
|
|
sense_resistor: 0.110
|
|
|
|
########################################
|
|
# Bed Settings
|
|
########################################
|
|
|
|
[heater_bed]
|
|
heater_pin: PA7
|
|
sensor_type: Generic 3950
|
|
sensor_pin: PA0
|
|
#control: pid
|
|
#pid_Kp: 55
|
|
#pid_Ki: 2
|
|
#pid_Kd: 100
|
|
min_temp: 0
|
|
max_temp: 125
|
|
max_power: 0.5
|
|
|
|
########################################
|
|
# Fan Settings
|
|
########################################
|
|
|
|
## DEFINE THIS IF YOU PLAN TO USE THE AUX FAN.
|
|
#[fan_generic aux_fan]
|
|
#pin: host:gpiochip0/gpio17 # PWM pin for fan speed control
|
|
#max_power: 1.0 # Set maximum power to 100%
|
|
#cycle_time: 0.01 # Smooth PWM frequency
|
|
#shutdown_speed: 0 # Turn off the fan during shutdown
|
|
|
|
[fan] # Parts Cooling Fan
|
|
pin: PA3
|
|
|
|
[heater_fan Heatbreak_Cooling] # Heatbreak Cooling On The Hotend
|
|
pin: PA4
|
|
heater: extruder
|
|
heater_temp: 50.0
|
|
fan_speed: 1.0
|
|
|
|
[board_pins]
|
|
aliases:
|
|
# EXP1 header
|
|
EXP1_1=PD5, EXP1_3=PB3, EXP1_5=PB5, EXP1_7=PB7, EXP1_9=<GND>,
|
|
EXP1_2=PD4, EXP1_4=PD6, EXP1_6=PB4, EXP1_8=PB6, EXP1_10=<5V>,
|
|
# EXP2 header
|
|
EXP2_1=PB14, EXP2_3=PB8, EXP2_5=PC10, EXP2_7=PC12, EXP2_9=<GND>,
|
|
EXP2_2=PB13, EXP2_4=PB9, EXP2_6=PB15, EXP2_8=<RST>, EXP2_10=<NC>
|
|
|
|
# See the sample-lcd.cfg file for definitions of common LCD displays.
|
|
|
|
########################################
|
|
# Probe Settings (BIQU MICROPROBE)
|
|
########################################
|
|
|
|
[output_pin probe_enable]
|
|
pin: PC15
|
|
value: 0
|
|
|
|
[gcode_macro Probe_Deploy]
|
|
gcode:
|
|
SET_PIN PIN=probe_enable VALUE=1
|
|
|
|
[gcode_macro Probe_Stow]
|
|
gcode:
|
|
SET_PIN PIN=probe_enable VALUE=0
|
|
|
|
[probe]
|
|
pin: ^!PC13 # For V1 version, set to ^PC13 for high-level trigger; for V2 version, set to ^!PC13 for low-level trigger.
|
|
deactivate_on_each_sample: False
|
|
x_offset: 28.0 # Actual offset of the MicroProbe installation
|
|
y_offset: -15.0 # Actual offset of the MicroProbe installation
|
|
#z_offset: 0.0 # Actual offset of the MicroProbe installation
|
|
speed: 10
|
|
activate_gcode:
|
|
Probe_Deploy
|
|
G4 P500 # Allow 200 milliseconds for the probe to deploy
|
|
deactivate_gcode:
|
|
Probe_Stow
|
|
|
|
########################################
|
|
# BED MESH, HOMING ETC.
|
|
########################################
|
|
|
|
[bed_mesh]
|
|
speed: 200
|
|
horizontal_move_z: 5
|
|
mesh_min: 38, 20
|
|
mesh_max: 238, 233
|
|
probe_count: 5, 5
|
|
|
|
[safe_z_home]
|
|
home_xy_position: 128, 128
|
|
speed: 200.0
|
|
z_hop: 10
|
|
z_hop_speed: 10.0
|
|
|
|
[screws_tilt_adjust]
|
|
screw1: 18, 45
|
|
screw1_name: front left screw
|
|
screw2: 200, 45
|
|
screw2_name: front right screw
|
|
screw3: 118, 230
|
|
screw3_name: rear right screw
|
|
horizontal_move_z: 5.
|
|
speed: 250.
|
|
screw_thread: CW-M5
|
|
|
|
########################################
|
|
# Other Settings / Unused
|
|
########################################
|
|
|
|
#[neopixel LED]
|
|
#pin: PC14
|
|
#chain_count:18
|
|
# The number of Neopixel chips that are "daisy chained" to the
|
|
# provided pin. The default is 1 (which indicates only a single
|
|
# Neopixel is connected to the pin).
|
|
#color_order: GRB
|
|
#initial_RED: 0.5
|
|
#initial_GREEN: 0.0
|
|
#initial_BLUE: 0.5
|
|
#initial_WHITE: 1.0
|
|
|
|
#[neopixel my_neopixel2]
|
|
#pin: PC14
|
|
|
|
#[adxl345]
|
|
#cs_pin: PC0
|
|
#spi_bus: spi2
|
|
|
|
#[tmc2209 extruder1]
|
|
#uart_pin: PA6
|
|
#run_current: 0.600
|
|
#diag_pin:
|
|
|
|
#sensor_type:MAX31865
|
|
#sensor_pin: PA4
|
|
#spi_bus: spi1
|
|
#rtd_nominal_r: 100
|
|
#rtd_reference_r: 430
|
|
#rtd_num_of_wires: 2
|
|
|
|
#[filament_switch_sensor material_0]
|
|
#switch_pin: PC2
|
|
|
|
#[extruder1]
|
|
#step_pin: PB0
|
|
#dir_pin: PB1
|
|
#enable_pin: !PC4
|
|
#heater_pin: PA7
|
|
#sensor_pin: PA2
|
|
#...
|
|
|
|
# Proximity switch
|
|
#[probe]
|
|
#pin: PC15
|
|
|
|
#[bltouch]
|
|
#sensor_pin: PC13
|
|
#control_pin: PC15
|
|
|
|
#[heater_fan SoC_fan]
|
|
#pin: CB1: gpio79
|
|
#pin: RPI: gpio26
|
|
|
|
#*# <---------------------- SAVE_CONFIG ---------------------->
|
|
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
|
#*#
|
|
#*# [probe]
|
|
#*# z_offset = 1.610
|
|
#*#
|
|
#*# [bed_mesh default]
|
|
#*# version = 1
|
|
#*# points =
|
|
#*# -0.015000, -0.015000, 0.004167
|
|
#*# -0.028333, -0.039167, -0.008333
|
|
#*# -0.030000, -0.047500, -0.015000
|
|
#*# x_count = 3
|
|
#*# y_count = 3
|
|
#*# mesh_x_pps = 2
|
|
#*# mesh_y_pps = 2
|
|
#*# algo = lagrange
|
|
#*# tension = 0.2
|
|
#*# min_x = 95.5
|
|
#*# max_x = 160.5
|
|
#*# min_y = 102.9
|
|
#*# max_y = 153.08
|
|
#*#
|
|
#*# [extruder]
|
|
#*# control = mpc
|
|
#*# block_heat_capacity = 6.03000
|
|
#*# sensor_responsiveness = 0.0992925
|
|
#*# ambient_transfer = 0.0744157
|
|
#*# fan_ambient_transfer = 0.0744157, 0.0769713, 0.0821679
|
|
#*#
|
|
#*# [heater_bed]
|
|
#*# control = pid
|
|
#*# pid_kp = 13.828
|
|
#*# pid_ki = 0.232
|
|
#*# pid_kd = 205.602
|
|
#*# pid_version = 1
|
|
#*# pid_target = 70.00
|
|
#*# pid_tolerance = 0.0200
|