mirror of
https://github.com/openhp/HeatPumpController.git
synced 2024-11-08 12:25:43 +00:00
Update README.md
This commit is contained in:
parent
c0f0e11c3d
commit
08a8957212
1 changed files with 8 additions and 7 deletions
15
README.md
15
README.md
|
@ -7,14 +7,15 @@ pumps. Controller can be easily used for newly designed heat pumps (HPs), includ
|
|||
|
||||
## Specs
|
||||
- 12V 0.5A DC power supply,
|
||||
- 230V output
|
||||
- 230V output,
|
||||
- up to 12 T sensors, -55..+125 °C range,
|
||||
- 4 relays: Compressor, Hot CP or Air Fan, Cold CP or Air Fan, Crankcase Heater
|
||||
- 2 inputs: Hot and cold side refrigerant over/under pressure NC sensors
|
||||
- 6 pin EEV connection: 4 * coils + 2 * 12V
|
||||
- control via remote display or local Serial (UART 5V)
|
||||
- automatically turns on/of system when heating required
|
||||
- takes care of system components, built-in protections: cold start, overheat, short-term power loss, power overload, ground loop freeze and compressor protection against liquid.
|
||||
- 4 relays: Compressor, Hot CP or Air Fan, Cold CP or Air Fan, Crankcase Heater,
|
||||
- 2 inputs: Hot and cold side refrigerant over/under pressure NC sensors,
|
||||
- 6 pin EEV connection: 4 * coils + 2 * 12V,
|
||||
- LED indication,
|
||||
- control via remote display or local Serial (UART 5V),
|
||||
- automatically turns on/of system when heating required,
|
||||
- built-in protections: cold start, overheat, short-term power loss, power overload, ground loop freeze and compressor protection against liquid.
|
||||
<br><br>
|
||||
|
||||
## Refrigeration schemes supported
|
||||
|
|
Loading…
Reference in a new issue