Update README.md

This commit is contained in:
openhp 2021-08-30 13:02:13 +00:00 committed by GitHub
parent 5c117376fe
commit 0cdbeddf00
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23

View file

@ -37,7 +37,7 @@
- download PCB Gerber file {-link here-} or get your own copy {-link there-} ,
- order electronic components, see BOM (Bill Of Materials) appendix,
- solder electronic components. {- assembly instructions here-}<br><br>.
{-soldered photo here-}
<img src="./m_c_assembly_completed.jpg" width="500"><br><br>
## Firmware upload
This process is the same as for other Arduinos:
@ -66,10 +66,11 @@ To run a self-tests:
- connect 12V power supply,
- disconnect +5V wire from USB-UART converter.<br>
To check EEV connection, you can use a stepper motor. If you are testing a real EEV, it will be closed after the first "beep" and partially opened after the second "beep". If it's not, check if stepper or EEV center pin(s) connected to +12V and try to swap coil-end pins (EEV1..EEV4). {-EEV photo here-}
To check EEV connection, you can use a stepper motor. If you are testing a real EEV, it will be closed after the first "beep" and partially opened after the second "beep". If it's not, check if stepper or EEV center pin(s) connected to +12V and try to swap coil-end pins (EEV1..EEV4).<br>
<img src="./m_c_selftest_EEV.jpg" width="500"><br>
To check temperature sensors connectors crimp one array of sensors. Plug it to all sensor connectors one-by-one and check results in a serial console.<br>
{-Photo: PCB-}<br>
{-Screenshot: serial console with temperature readings: -}<br>
<img src="./m_c_selftest_t_sensors.jpg" width="500"><br>
<img src="./m_c_selftest_t_readings.png"<br>
After tests completed, comment 3 self-test defines.<br>
Choose your installation scheme and uncomment one of those options:
```c