mirror of
https://github.com/openhp/HeatPumpController.git
synced 2024-11-18 12:33:59 +00:00
Update README.md
This commit is contained in:
parent
23934e1e50
commit
1e9c87d106
1 changed files with 6 additions and 6 deletions
12
README.md
12
README.md
|
@ -9,10 +9,10 @@ pumps. Controller can be easily used for newly designed heat pumps (HPs), includ
|
|||
- 12V 0.5A DC power supply,
|
||||
- 230V output
|
||||
- up to 12 T sensors, -55..+125 °C range,
|
||||
- 4 relays (<sup>Compressor, Hot CP or Air Fan, Cold CP or Air Fan, Crankcase Heater</sup>)
|
||||
- 2 inputs (<sub>Hot and cold side refrigerant over/under pressure NC sensors</sub>)
|
||||
- 6 pin EEV connection <sub>(4 * coils + 2 * 12V)</sub>
|
||||
- control via remote display or local Serial(UART 5V)
|
||||
- 4 relays: Compressor, Hot CP or Air Fan, Cold CP or Air Fan, Crankcase Heater
|
||||
- 2 inputs: Hot and cold side refrigerant over/under pressure NC sensors
|
||||
- 6 pin EEV connection: 4 * coils + 2 * 12V
|
||||
- control via remote display or local Serial (UART 5V)
|
||||
- automatically turns on/of system when heating required
|
||||
- takes care of system components, built-in protections: cold start, overheat, short-term power loss, power overload, ground loop freeze and compressor protection against liquid.
|
||||
<br><br>
|
||||
|
@ -24,8 +24,8 @@ pumps. Controller can be easily used for newly designed heat pumps (HPs), includ
|
|||
<br><br>
|
||||
|
||||
## Installations supported
|
||||
- Indoor (a house or technical building with a more or less stable temperature)
|
||||
- Outdoor (harsh climatic conditions taken into account and tested down to minus 32°C)
|
||||
- Indoor: a house or technical building with a more or less stable temperature
|
||||
- Outdoor: harsh climatic conditions taken into account and tested down to minus 32°C
|
||||
<br><br>
|
||||
|
||||
## Changelog and history
|
||||
|
|
Loading…
Reference in a new issue