github-mirrors/HeatPumpController
1
0
Fork 0
mirror of https://github.com/openhp/HeatPumpController.git synced 2024-11-18 12:33:59 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

Update README.md

Browse source
This commit is contained in:
openhp 2021-03-30 20:30:48 +00:00 committed by GitHub
parent 41b4277d37
commit 297d4ab78d
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 1 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
README.md
View file

@ -81,7 +81,7 @@ Phases (1st wire in electrical cables):
- and connect the second "phase" terminal to the AC input of the 12V power supply, - and connect the second "phase" terminal to the AC input of the 12V power supply,
- connect the "Compressor" relay output to the Compressor input, - connect the "Compressor" relay output to the Compressor input,
- connect the "Hot CP" relay output to the Hot Circulation Pump input (or to the fan power input of the indoor unit if you are using an air system), - connect the "Hot CP" relay output to the Hot Circulation Pump input (or to the fan power input of the indoor unit if you are using an air system),
- connect the "Cold CP" relay output to the Cold Circulation Pump input (or to the fan power input of the outdoor unit air fan), - connect the "Cold CP" relay output to the Cold Circulation Pump input (or to the fan power input of the outdoor unit),
- when using a compressor heater: connect the "Crankcase heater" relay output to the heater cable (highly recommended for outdoor installation and year-round use). - when using a compressor heater: connect the "Crankcase heater" relay output to the heater cable (highly recommended for outdoor installation and year-round use).
Neutral (2nd cable in electrical cables), Neutral (2nd cable in electrical cables),
- connect all the second wires of power cords to the "neutral" terminals on the board. - connect all the second wires of power cords to the "neutral" terminals on the board.