github-mirrors/HeatPumpController
1
0
Fork 0
mirror of https://github.com/openhp/HeatPumpController.git synced 2024-11-18 12:33:59 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

Update README.md

Browse source
This commit is contained in:
openhp 2021-08-29 16:30:39 +00:00 committed by GitHub
parent 5bdd3f278d
commit 3f8ffbc07d
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 5 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

7
README.md
View file

@ -84,7 +84,6 @@ Assuming you have installed your controller to the permanent place, the next ste
Wiring is very simple, despite a lot of terminals.<br>
Phases (1st wire in electrical cables):
- connect the "power inlet" wire to one of the "phase" terminals,
- and connect the second "phase" terminal to the AC input of the 12V power supply,
- connect the "Compressor" relay output to the Compressor input,
- connect the "Hot CP" relay output to the Hot Circulation Pump input (or to the fan power input of the indoor unit if you are using an air system),
- connect the "Cold CP" relay output to the Cold Circulation Pump input (or to the fan power input of the outdoor unit),
@ -92,6 +91,10 @@ Phases (1st wire in electrical cables):
- connect all the second wires of power cords to the "neutral" terminals on the board.
{-Photo of HV connections-}<br>
- connect the second "phase" and one of "neutral" terminals to the AC input of the 12V power supply,
- connect 12V power supply output to GND and 12V
{-Photo of 12V connections-}<br>
Crimp and plug low-voltage connectors:
- crimp SCT013 sensor wires (the only one low-voltage device in this circuit with interchangeable wires), connect and install it on the inlet phase wire,
{-Photo: power wire + SCT013-}<br>
@ -113,7 +116,7 @@ You may prefer to solder the wires over using terminals and crimping connectors.
And one more: **remember! 230V inside!** Do not turn on the phase without need.<br>
Have you ever received 230V with your own hands? If yes - you know. If no - do not try.<br>
Also remember about animals and children during the installation at a permanent place.<br><br>
{-Photo: all together-}<br><br>
{-? Photo: all together ?-}<br><br>
## Control and usage: serial console
This is a first interface to Heat Pump controller you'll see after uploading firmware (Tools->Serial Monitor).<br>