diff --git a/README.md b/README.md
index ff92b9c..8ce0935 100644
--- a/README.md
+++ b/README.md
@@ -117,13 +117,11 @@ Abbreviations: refer to Appendix A below.<br>
 And you'll see diagnostic messages in the serial console.<br><br>
 
 ## Control and usage: [remote control display](https://github.com/openhp/Display/)
-
 This is a way for the end user to control Heat Pump.<br>
 <img src="./m_display_main.jpg" width="300"><br><br>
-End user do not wat to know much about refrigerants, evaporation, discharge temperature and so on, so this display designed as simple as it possible. See [display page](https://github.com/openhp/Display/) for datails. And yes, this display is also open product with available gerber, PCB and source code.<br><br>
+End user does not want to know much about refrigerants, evaporation, discharge temperatures and so on, so this display designed as simple as it was possible. See [display page](https://github.com/openhp/Display/) for details. And yes, this display is open product too, with available Gerber, PCB and source code.<br><br>
 
 ## Control and usage: [service display](https://github.com/openhp/ServiceDisplay/)
-
 One day i'v realised that netbook with a serial console is very good diagnostic tool, but i want more compact tool to get maximum available information from heat pump. So this "Quickly Assembled Service Display" appeared. It fits everywhere and with a good power bank it can works 2-3 days long, without any additional power source. The diagnostic display is build from scratch, no PCB and housing here (and no plans to create it), because i do not see this device as a permanent-mounted display for the end user.<br>
 <img src="./m_tft_mainscreen.jpg" width="300"><br><br>
 It you want a compact and visual tool - this device is for you, so check [service display page](https://github.com/openhp/ServiceDisplay/) .<br><br>