From 5bdd3f278d73db190722295da54af0cc4998111d Mon Sep 17 00:00:00 2001 From: openhp <60161126+openhp@users.noreply.github.com> Date: Sun, 29 Aug 2021 14:24:59 +0000 Subject: [PATCH] Update README.md --- README.md | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/README.md b/README.md index 1dd587a..b000c46 100644 --- a/README.md +++ b/README.md @@ -88,8 +88,7 @@ Phases (1st wire in electrical cables): - connect the "Compressor" relay output to the Compressor input, - connect the "Hot CP" relay output to the Hot Circulation Pump input (or to the fan power input of the indoor unit if you are using an air system), - connect the "Cold CP" relay output to the Cold Circulation Pump input (or to the fan power input of the outdoor unit), -- when using a compressor heater: connect the "Crankcase heater" relay output to the heater cable (highly recommended for outdoor installation and year-round use). -Neutral (2nd cable in electrical cables), +- when using a compressor heater: connect the "Crankcase heater" relay output to the heater cable (highly recommended for outdoor installation and year-round use), - connect all the second wires of power cords to the "neutral" terminals on the board. {-Photo of HV connections-}