mirror of
https://github.com/openhp/HeatPumpController.git
synced 2024-11-18 12:33:59 +00:00
Update README.md
This commit is contained in:
parent
2fd3196a54
commit
7e42fff49c
1 changed files with 2 additions and 1 deletions
|
@ -49,7 +49,7 @@ This process is the same as for other Arduinos:
|
|||
|
||||
For arduinos with an old bootloader you need to update it. (Tools-> Burn Bootloader).<br>
|
||||
For successful compilation, you must have "SoftwareSerial", "OneWire" and "DallasTemperature" libraries installed (see Tools -> Manage Libraries).<br>
|
||||
For the first time it's enough to upload firmware without any tuning. Think of it as of a commercial closed-source controller, where you cannot fine-tune internal options. And any other manual configuration do not required too, just upload firmware.<br><br>
|
||||
For the first time it's enough to upload firmware without any tuning. Think of it as of a commercial closed-source controller, where you cannot fine-tune internal options. And any other manual configuration do not required too, just upload firmware. You will see an error LED indication and hear a beep, since no sensors connected to your controller. Follow the next steps.<br>
|
||||
<img src="./m_add_IDE.png" height="300"><br><br>
|
||||
|
||||
## Self-tests
|
||||
|
@ -70,6 +70,7 @@ To check EEV, you can use a stepper motor as shown in the video. If you are test
|
|||
To check temperature sensors connectors prepare one array of sensors. Plug it to all sensors connectors one-by-one and check results in a serial console.<br>
|
||||
{-Photo: PCB with connected arrays of sensors (I have enough sensors, so all 3 arrays are connected except Ts2 and Treg) -}<br>
|
||||
{-Screenshot: serial console with temperature readings: -}<br>
|
||||
After tests completed comment 3 self-test defines and re-upload firmware.<br><br>
|
||||
|
||||
## Wiring
|
||||
Wiring is very simple despite the many connections: <br>
|
||||
|
|
Loading…
Reference in a new issue