github-mirrors/HeatPumpController
1
0
Fork 0
mirror of https://github.com/openhp/HeatPumpController.git synced 2024-11-18 12:33:59 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

Update README.md

Browse source
This commit is contained in:
openhp 2021-03-22 09:54:04 +00:00 committed by GitHub
parent f61761e1d7
commit a673b15e10
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 28 additions and 40 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

68
README.md
View file

@ -128,50 +128,38 @@ qwer
qwer
## Diagnostic and status messages
<br>
**LastStopCause messages. Why system was stopped**<br>
**P.WtMax:_WATTS_** Protective stop, overcurrent, double check your system, **MAX_WATTS** and **POWERON_HIGHTIME** options<br>
**E.Tci, E.Tco, E.Tbe, E.Tae, E.Ts1, E.Ts2, E.Tcrc, E.Treg, E.Tac, E.Tbc, E.Tho, E.Thi** Sensor lost, check wiring. Refer to "T sensors abbreviations"
**E.Tci, E.Tco, E.Tbe, E.Tae, E.Ts1, E.Ts2, E.Tcrc, E.Treg, E.Tac, E.Tbc, E.Tho, E.Thi** Sensor lost, check wiring. Refer to "T sensors abbreviations"<br>
**E.PresCold** Cold side pressure too low, check refrigerant charge and pressure sensors<br>
**E.PresHot** Hot side pressure too high, check refrigerant charge and pressure sensors<br>
<br>
**LastStartMessage messages. what event system is waiting for starting work**<br>
"StCntd:" + outString; //start countdown, max 5 numerical places (1st start)
"E.PresCold");
"E.PresHot");
//waiting for T stabilisation
lastStartMsgTxt = "#HotPrp:" + String( (HOTCIRCLE_CHECK_PREPARE -(unsigned long)(millis_now - millis_last_hotWP_off))/1000 );
} else if (hotside_circle_state == 0) { //sleeping, hot CP off, waiting for next check cycle
lastStartMsgTxt = "#HotSlp:" + String( (HOTCIRCLE_START_EVERY -(unsigned long)(millis_now - millis_last_hotWP_on))/1000 );
**StCntd:_seconds_** startup countdown, short-term power loss protection
**#HotPrp:_seconds_** hot side pump is on, waiting for T stabilisation countdown see **HOTCIRCLE_CHECK_PREPARE** option
**#HotSlp:_seconds_** sleepeng, last cycle temperature was > setpoint, waiting for next startup, see **HOTCIRCLE_START_EVERY** option
**#HPSlp:_seconds_**" + String( (mincycle_poweroff -(unsigned long)(millis_now - millis_last_heatpump_on))/1000 );
if (millis_last_heatpump_on != 0){
lastStartMsgTxt = "#HPSlp:" + String( (mincycle_poweroff -(unsigned long)(millis_now - millis_last_heatpump_on))/1000 );
#Tho>Max"); }
#Thi>Max"); }
#CaseCold"); }
#CaseHot"); }
**#Tho>Max**<br>
**#Thi>Max**<br>
**#CaseCold**<br>
**#CaseHot**<br>
**#Thi>Setp.**<br>
**#Ts1>Setp.**<br>
**#Tae<RefMin**<br>
**#Tbe<RefMin**<br>
**#Tbc>Max**<br>
**#Tci<ColdMin**<br>
**#Tco<ColdMin**<br>
**#CWPpStart** coldside start, preparing system to start compressor<br>
**#CWPp:"** + String( (COLDCIRCLE_PREPARE <br>
**HP_Started**<br>
#Thi>Setp."); }
**Normal_stop**<br>
xt = F("#Ts1>Setp.")
#Tae<RefMin"); }
#Tbe<RefMin"); }
#Tbc>Max"); }
#Tci<ColdMin"); }
#Tco<ColdMin"); }
#CWPpStart" - coldside start, preparing system to start compressor
"#CWPp:" + String( (COLDCIRCLE_PREPARE -(unsigned long)(millis_now - millis_last_coldWP_off))/1000 );
"HP_Started");
"Normal_stop");
HWP_ON")
**HWP_ON**<br>
((heatpump_state == 1) && (hotside_circle_state == 0) ) || ((_1st_start_sleeped == 0 )
@ -238,10 +226,10 @@ _LO) {
"Err: ");
PrintSS_SaI(errorcode);
**Additional messages**
**OK:E.T.Sens.** Sensor restored
**OK:Pr.Cold** Cold side pressure restored
**OK:Pr.Hot** Hot side pressure restored
**Additional messages**<br>
**OK:E.T.Sens.** Sensor restored<br>
**OK:Pr.Cold** Cold side pressure restored<br>
**OK:Pr.Hot** Hot side pressure restored<br><br>
## Firmware options and fine tunings