From a9c175842dc0b87a5d90fc5f8c2cd1fdbd07d103 Mon Sep 17 00:00:00 2001
From: openhp <60161126+openhp@users.noreply.github.com>
Date: Sat, 3 Apr 2021 08:55:33 +0000
Subject: [PATCH] Update README.md

---
 README.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/README.md b/README.md
index aea004c..3df671a 100644
--- a/README.md
+++ b/README.md
@@ -234,7 +234,7 @@ LEDs allow you to make rapid diagnostics without connecting a serial console or
 | **485_TX**     	|  485 transceiver transmits a reply  |
 | **Manual mode**     	|  EEV in a manual mode   |
 | **LSC: error**     	|  Last stop was caused by an error. If you see this LED ON, it's a reason to connect either console or Service Display. Diagnostics  required.   |
-| **LSC: protection**	|  Last stop was caused by protection. In some conditions (like long powered-on periods or refilling) this can occur. This LED indicates that something exceeded normal run conditions. |
+| **LSC: protection**	|  Last stop was caused by protection. In some cases (like long powered-on periods or refilling) this can occur. Here no recommendations about diagnostic, since all systems and operation conditions are different. This LED indicates that something exceeded normal run conditions. |
 | **OK**     |  System OK.  |
 | **ERROR**     |  Something wrong: not all T sensors connected, one of the pressure sensors is not OK. Diagnostics required.   |
 | **Relays LEDs**     |  Indicates corresponding relay state  |