github-mirrors/HeatPumpController
1
0
Fork 0
mirror of https://github.com/openhp/HeatPumpController.git synced 2024-11-18 12:33:59 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

Update README.md

Browse source
This commit is contained in:
openhp 2021-03-28 17:45:29 +00:00 committed by GitHub
parent 30fe9478b7
commit ae5c64af04
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 4 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
README.md
View file

@ -38,8 +38,10 @@
- order electronic components, see BOM (Bill Of Materials) appendix below,
- solder electronic components. {- assembly instructions here-}
## Firmware upload
This process is same as for other Arduinos:
This process is the same as for other Arduinos:
- connect USB-> UART converter,
- start Arduino IDE,
- open the firmware {-link here-} file,
@ -48,7 +50,7 @@ This process is same as for other Arduinos:
For arduinos with an old bootloader you need to update it. (Tools-> Burn Bootloader).<br>
For successful compilation, you must have "SoftwareSerial", "OneWire" and "DallasTemperature" libraries installed (see Tools -> Manage Libraries).<br>
As a first try it's enough to upload firmware without any tunings. Think of it as of commercial closed-source controller, where you cannot fine-tune internal options. And any other manual configuration is not required too, just upload firmware.<br><br>
For the first time it's enough to upload firmware without any tuning. Think of it as of a commercial closed-source controller, where you cannot fine-tune internal options. And any other manual configuration do not required too, just upload firmware.<br><br>
## Self-tests
QA tests are available to test the assembled board.<br>