From c3c78e60ee441fa69bfd00dbaf6fcdde58ad15c1 Mon Sep 17 00:00:00 2001
From: openhp <60161126+openhp@users.noreply.github.com>
Date: Tue, 30 Mar 2021 19:40:42 +0000
Subject: [PATCH] Update README.md
---
README.md | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/README.md b/README.md
index dbcf93c..be79b39 100644
--- a/README.md
+++ b/README.md
@@ -72,7 +72,9 @@ To check temperature sensors connectors crimp one array of sensors. Plug it to a
{-Screenshot: serial console with temperature readings: -}
After tests completed comment 3 self-test defines and re-upload firmware.
-## Wiring
+## Wiring (permanent controller installation).
+Here are no instructions for choosing the right placement for permanent installation of the controller. It depends. You're building your system, and you know much better "where" and "how".
+Assuming you have installed your controller to the permanent place, the next step is wiring.
Wiring is very simple, despite a lot of terminals.
Phases (1st wire in electrical cables):
- connect the "power inlet" wire to one of the "phase" terminals,